# 'Volcopy backup to tape:' # # The following script is to be used as # a sample only. It is the script in # use on USG System A (mhtsa) at the time # of this release, and does not necessarily # reflect the needs of another site. # # 'USG site only!' echo 'Enter file system name (e.g., usr):' read f echo 'Enter device name (e.g., /dev/rrp10):' read d echo 'Enter pack volume label (e.g., p0045):' read v : 'This is site dependent!!!' # echo 'Enter tape drive number (e.g., 0, 1,...):' # read t # if test $t = 0 # then # t=/dev/rmt2 # elif test $t = 1 # then # t=/dev/rmt3 # else # echo 'Not one of our tape drives' # exit 1 # fi t=/dev/rmt1 echo 'Enter tape volume label (e.g., t0005):' read l /etc/labelit $t if test $? -gt 0 then /etc/labelit $t $f $l -n if test $? -gt 0 then exit 1 fi fi /etc/volcopy $f $d $v $t $l