Orphaned Response

[guest2 at smu.UUCP]

I am making good progress on it. However I havn't tried it yet on 22-bit
. We have it running on 4 RK05's and 1 RL02. Keep in mind the following:

1. Change the RL02 controller to 18-bit for the time being.
2. Perhaps do something on the backplane also.
3. Get an old PDP11 handbook and find the bootstrap for RL02.
4. Boot with line-time-clock off, put a switch on the front with that
   and change the multifunction board accordingly.
   I could not get it to boot the standard 173000G way yet.
5. Keep in mind that the generic system of 2.9 is setup for the RL01
   After a while I found out that messing my file system was caused by that!
   Do an adb -w /dev/unix on swplo and nswap and set them to 17000 and 3450
   or so. 
6. As soon as I have my acts together for 22-bit I will inform you.

sincerly,
			smu!txsil!gertjan
			Gertjan Vinkesteyn
			Summer Institute of Linguestics
			7500 W Camp Wisdom Rd
			Dallas TX 75236
			(214) 298-3331
					(currently guest at smu because of
					installing notes on our 68K system