3130 Genlock <-> Lenco

[Chris Shaw]

In article <390 at fsu.scri.fsu.edu> pepke at scri1.scri.fsu.edu (Eric Pepke) writes:
>Has anybody successfully connected an old 3130 genlock board to a Lenco
>sync generator/NTSC encoder?  The Lenco generator has six outputs: BF, SY,
>HD, VD, BL, and SC.

What, no "Video Out" ??
Actually, all this other stuff is the NTSC signal broken into its various
bits and peices, such as Horizontal Sync, Vertical Sync, Blanking, etc...

So, hook Red on Iris to Red input on the Lenco, Red out on Lenco to the
Red input on your monitor. Same for Green, Blue and Sync. On our CCE-850,
inputs are the bottom row of 4 BNC connectors, outputs are the top row.
Hook "Video Output" on the Lenco to Video input on a NTSC monitor, and
it should work.  Works on our 2400 & our 3130.

>Eric Pepke    INTERNET: pepke at gw.scri.fsu.edu

-- 
Chris Shaw     University of Alberta
cdshaw at alberta.UUCP
CatchPhrase: Bogus as HELL !