Maxtor LXT-200S

[Stanley Gibson]

In article <1990Aug7.003304.1753 at rice.edu> hargen at pdn.paradyne.com (Bill Hargen) writes:
>X-Sun-Spots-Digest: Volume 9, Issue 295, message 2

Maxtor LXT200 jumper information
>
>9-10:	The parity disable jumper is not currently supported.  When it is

>7-8:	With no jumper, the disk drive does not spin up until the initiator
>	issues a START/STOP UNIT command with the start bit equal to one.
>	(This option is not implemented.)

On the latest revision of the drive these features are supported AND note
that they are reversed. 9-10 are start/stop and 7-8 are parity enable.  By
the way Maxtor plans to replace the 200MB product with a 213MB. The new
product will have 6 zones instead of 3.