2.11BSD/src/games/warp/term.h
/* $Header: term.h,v 7.0.1.2 86/12/12 17:05:15 lwall Exp $ */
/* $Log: term.h,v $
* Revision 7.0.1.2 86/12/12 17:05:15 lwall
* Baseline for net release.
*
* Revision 7.0.1.1 86/10/16 10:53:33 lwall
* Added Damage. Fixed random bugs.
*
* Revision 7.0 86/10/08 15:14:07 lwall
* Split into separate files. Added amoebas and pirates.
*
*/
/* warp will still work without the following, but may get ahead at low speed */
#ifdef TIOCOUTQ /* chars left in output queue */
#define output_pending() (ioctl(1, TIOCOUTQ, &iocount),iocount)
#endif
/* If some of the following look something like curses calls, it is because
* warp used to use curses but doesn't now. Warp was neither as efficient nor
* as portable with curses, and since the program had to cheat on curses all
* over the place anyway, we ripped it out.
*/
#define setimage(of,to) (mvaddch(of->posy+1,of->posx*2,of->image=(to)))
#define mvaddch(y,x,ch) move((y),(x),(ch))
/* #define addch(ch) (tmpchr=(ch), write(1,&tmpchr,1), real_x++) */
#define mvaddc(y,x,ch) move((y),(x),(ch))
#define addc(ch) (write(1,&(ch),1), real_x++)
#define addspace() (write(1," ",1), real_x++)
#define mvaddstr(y,x,s) (move((y),(x),0), tmpstr = (s), \
tmplen = strlen(tmpstr), write(1, tmpstr, tmplen), real_x += tmplen)
EXT int tmplen;
EXT char *tmpstr;
/* EXT char tmpchr; */
/* The following macros are like the pseudo-curses macros above, but do
* certain amount of controlled output buffering.
*
* NOTE: a beg_qwrite()..end_qwrite() sequence must NOT contain a cursor
* movement (move), because the move() routine uses beg_qwrite()..end_qwrite()
* itself.
*/
#define beg_qwrite() (maxcmstring = cmbuffer)
#ifdef vax
#define qwrite() asm("movc3 _gfillen,_filler,*_maxcmstring"); maxcmstring += gfillen
#else
#define qwrite() (movc3(gfillen,filler,maxcmstring), maxcmstring += gfillen)
#endif
#define qaddc(ch) (*maxcmstring++ = (ch), real_x++)
#define qaddch(ch) (*maxcmstring++ = (ch), real_x++)
#define qaddspace() (*maxcmstring++ = ' ', real_x++)
#define end_qwrite() (write(1,cmbuffer,maxcmstring-cmbuffer))
/* setting a ??size to infinity forces cursor addressing in that direction */
EXT int CMsize;
EXT int BCsize INIT(1);
EXT int DOsize INIT(1000);
EXT int UPsize INIT(1000);
EXT int NDsize INIT(1000);
EXT int charsperhalfsec;
EXT int real_y INIT(-100);
EXT int real_x INIT(-100);
#ifdef DOINIT
char filler[] = {0,'\b',0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
#else
EXT char filler[];
#endif
EXT char *bsptr INIT(filler+1);
EXT char term[12];
EXT char gfillen INIT(25);
EXT char *maxcmstring;
EXT char cmbuffer[512];
#define BREAKCH '\0'
EXT char INTRCH INIT('\03');
#ifdef PUSHBACK
EXT char circlebuf[PUSHSIZE];
EXT int nextin INIT(0);
EXT int nextout INIT(0);
# ifdef PENDING
# ifdef FIONREAD
EXT long iocount INIT(0);
# ifndef lint
# define input_pending() (nextin!=nextout || \
(ioctl(0, FIONREAD, &iocount),(int)iocount))
# else
# define input_pending() bizarre
# endif /* lint */
# else /* FIONREAD */
int circfill();
# ifdef RDCHK
# ifndef lint
# define input_pending() rdchk(0)
# else /* lint */
# define input_pending() bizarre
# endif /* lint */
# else /* RDCHK */
# ifndef O_NDELAY /* assert O_NDELAY */
??? PENDING isn't defined correctly in warp.h
# endif
EXT int devtty INIT(0);
# ifndef lint
# define input_pending() (nextin!=nextout || circfill())
# else
# define input_pending() bizarre
# endif /* lint */
# endif /* RDCHK */
# endif /* FIONREAD */
# else /* PENDING */
??? warp won't work without PENDING
# ifndef lint
# define input_pending() (nextin!=nextout)
# else
# define input_pending() bizarre
# endif /* lint */
# endif /* PENDING */
#else /* PUSHBACK */
# ifdef PENDING
# ifdef FIONREAD /* must have FIONREAD or O_NDELAY for input_pending() */
# define read_tty(addr,size) read(0,addr,size)
# ifndef lint
# define input_pending() (ioctl(0, FIONREAD, &iocount), \
(int)iocount)
# else
# define input_pending() bizarre
# endif /* lint */
EXT long iocount INIT(0);
# else /* FIONREAD */
# ifdef RDCHK /* actually, they can have rdchk() too */
# define read_tty(addr,size) read(0,addr,size)
# ifndef lint
# define input_pending() rdchk(0)
# else /* lint */
# define input_pending() bizarre
# endif /* lint */
# else /* RDCHK */
# ifndef O_NDELAY /* assert O_NDELAY */
??? PENDING isn't defined correctly in warp.h
# endif
EXT int devtty INIT(0);
EXT bool is_input INIT(FALSE);
EXT char pending_ch INIT(0);
# ifndef lint
# define input_pending() (is_input || \
(is_input=read(devtty,&pending_ch,1)))
# else
# define input_pending() bizarre
# endif /* lint */
# endif /* RDCHK */
# endif /* FIONREAD */
# else /* PENDING */
??? warp won't work without PENDING
# define read_tty(addr,size) read(0,addr,size)
# define input_pending() (FALSE)
# endif /* PENDING */
#endif /* PUSHBACK */
/* stuff wanted by terminal mode diddling routines */
#ifdef TERMIO
EXT struct termio _tty, _oldtty;
#else
EXT struct sgttyb _tty;
EXT int _res_flg INIT(0);
#endif
EXT int _tty_ch INIT(2);
EXT bool bizarre INIT(FALSE); /* do we need to restore terminal? */
/* terminal mode diddling routines */
#ifdef TERMIO
#define raw() ((bizarre=1),_tty.c_lflag &=~ISIG,_tty.c_cc[VMIN] = 1,ioctl(_tty_ch,TCSETAF,&_tty))
#define noraw() ((bizarre=1),_tty.c_lflag |= ISIG,_tty.c_cc[VEOF] = CEOF,ioctl(_tty_ch,TCSETAF,&_tty))
#define crmode() ((bizarre=1),_tty.c_lflag &=~ICANON,_tty.c_cc[VMIN] = 1,ioctl(_tty_ch,TCSETAF,&_tty))
#define nocrmode() ((bizarre=1),_tty.c_lflag |= ICANON,_tty.c_cc[VEOF] = CEOF,ioctl(_tty_ch,TCSETAF,&_tty))
#define echo() ((bizarre=1),_tty.c_lflag |= ECHO, ioctl(_tty_ch, TCSETAW, &_tty))
#define noecho() ((bizarre=1),_tty.c_lflag &=~ECHO, ioctl(_tty_ch, TCSETAW, &_tty))
#define nl() ((bizarre=1),_tty.c_iflag |= ICRNL,_tty.c_oflag |= ONLCR,ioctl(_tty_ch, TCSETAW, &_tty))
#define nonl() ((bizarre=1),_tty.c_iflag &=~ICRNL,_tty.c_oflag &=~ONLCR,ioctl(_tty_ch, TCSETAW, &_tty))
#define savetty() (ioctl(_tty_ch, TCGETA, &_oldtty),ioctl(_tty_ch, TCGETA, &_tty))
#define resetty() ((bizarre=0),ioctl(_tty_ch, TCSETAF, &_oldtty))
#define unflush_output()
#else
#define raw() ((bizarre=1),_tty.sg_flags|=RAW, stty(_tty_ch,&_tty))
#define noraw() ((bizarre=1),_tty.sg_flags&=~RAW,stty(_tty_ch,&_tty))
#define crmode() ((bizarre=1),_tty.sg_flags |= CBREAK, stty(_tty_ch,&_tty))
#define nocrmode() ((bizarre=1),_tty.sg_flags &= ~CBREAK,stty(_tty_ch,&_tty))
#define echo() ((bizarre=1),_tty.sg_flags |= ECHO, stty(_tty_ch, &_tty))
#define noecho() ((bizarre=1),_tty.sg_flags &= ~ECHO, stty(_tty_ch, &_tty))
#define nl() ((bizarre=1),_tty.sg_flags |= CRMOD,stty(_tty_ch, &_tty))
#define nonl() ((bizarre=1),_tty.sg_flags &= ~CRMOD, stty(_tty_ch, &_tty))
#define savetty() (gtty(_tty_ch, &_tty), _res_flg = _tty.sg_flags)
#define resetty() ((bizarre=0),_tty.sg_flags = _res_flg, stty(_tty_ch, &_tty))
#endif /* TERMIO */
#ifdef TIOCSTI
#ifdef lint
#define forceme(c) ioctl(_tty_ch,TIOCSTI,Null(long*)) /* ghad! */
#else
#define forceme(c) ioctl(_tty_ch,TIOCSTI,c) /* pass character in " " */
#endif /* lint */
#else
#define forceme(c)
#endif
/* termcap stuff */
/*
* NOTE: if you don't have termlib you'll have to define these strings,
* the tputs routine, and the tgoto routine.
* The tgoto routine simply produces a cursor addressing string for a given
* x and y. The 1st argument is a generic string to be interpreted.
* If you are hardwiring it you might just ignore the 1st argument.
* The tputs routine interprets any leading number as a padding factor, possibly
* scaled by the number of lines (2nd argument), puts out the string (1st arg)
* and the padding using the routine specified as the 3rd argument.
*/
#ifdef HAVETERMLIB
EXT char *BC INIT(Nullch); /* backspace character */
EXT char *UP INIT(Nullch); /* move cursor up one line */
EXT char *myUP;
EXT char *ND INIT(Nullch); /* non-destructive cursor right */
EXT char *myND;
EXT char *DO INIT(Nullch); /* move cursor down one line */
EXT char *myDO;
EXT char *CR INIT(Nullch); /* get to left margin, somehow */
EXT char *VB INIT(Nullch); /* visible bell */
EXT char *CL INIT(Nullch); /* home and clear screen */
EXT char *CE INIT(Nullch); /* clear to end of line */
EXT char *CM INIT(Nullch); /* cursor motion -- PWP */
EXT char *HO INIT(Nullch); /* home cursor -- PWP */
EXT char *CD INIT(Nullch); /* clear to end of display -- PWP */
EXT char *SO INIT(Nullch); /* begin standout mode */
EXT char *SE INIT(Nullch); /* end standout mode */
EXT int SG INIT(0); /* blanks left by SO and SE */
EXT char *US INIT(Nullch); /* start underline mode */
EXT char *UE INIT(Nullch); /* end underline mode */
EXT char *UC INIT(Nullch); /* underline a character, if that's how it's done */
EXT int UG INIT(0); /* blanks left by US and UE */
EXT bool AM INIT(FALSE); /* does terminal have automatic margins? */
EXT bool XN INIT(FALSE); /* does it eat 1st newline after automatic wrap? */
EXT char PC INIT(0); /* pad character for use by tputs() */
EXT short ospeed INIT(0); /* terminal output speed, for use by tputs() */
EXT int LINES INIT(0), COLS INIT(0); /* size of screen */
EXT int just_a_sec INIT(960); /* 1 sec at current baud rate */
/* (number of nulls) */
EXT char ERASECH; /* rubout character */
EXT char KILLCH; /* line delete character */
/* define a few handy macros */
#define clear() (do_tc(CL,LINES),real_y=real_x=0)
#define erase_eol() do_tc(CE,1)
#define backspace() (do_tc(BC,0),real_x--)
#define clear_rest() do_tc(CD,LINES)
#define underline() do_tc(US,1)
#define un_underline() do_tc(UE,1)
#define underchar() do_tc(UC,0)
#define standout() do_tc(SO,1)
#define un_standout() do_tc(SE,1)
#define up_line() do_tc(UP,1)
#define carriage_return() do_tc(CR,1)
#define dingaling() do_tc(VB,1)
#else
???????? /* up to you */
#endif
void term_init();
void term_set();
#ifdef PUSHBACK
void pushchar();
void mac_init();
void mac_line();
#endif
void eat_typeahead();
void settle_down();
#ifndef read_tty
int read_tty();
#endif
void getcmd();
int read_nd();
void page();
void move();
void do_tc();
int comp_tc();
void helper();
void rewrite();
char cmstore();