2.11BSD/src/usr.sbin/sendmail.MX/src/deliver.c
/*
* Copyright (c) 1988 Regents of the University of California.
* All rights reserved.
*
* Redistribution and use in source and binary forms are permitted
* provided that this notice is preserved and that due credit is given
* to the University of California at Berkeley. The name of the University
* may not be used to endorse or promote products derived from this
* software without specific prior written permission. This software
* is provided ``as is'' without express or implied warranty.
*
* Sendmail
* Copyright (c) 1983 Eric P. Allman
* Berkeley, California
*
* Bugfix:
* 1993 Jan 30 Lasse Ylitalo && Johnny Billquist
* When delivering mail via smtp the mail went into
* the bit bucket. Only smtpinit was called...
*/
#if !defined(lint) && !defined(NOSCCS)
static char sccsid[] = "@(#)deliver.c 5.21 (Berkeley) 5/5/88";
#endif /* not lint */
#include <sendmail.h>
#include <sys/signal.h>
#include <sys/stat.h>
#include <sys/ioctl.h>
#include <netdb.h>
#include <errno.h>
#include <arpa/nameser.h>
#include <resolv.h>
/*
** DELIVER -- Deliver a message to a list of addresses.
**
** This routine delivers to everyone on the same host as the
** user on the head of the list. It is clever about mailers
** that don't handle multiple users. It is NOT guaranteed
** that it will deliver to all these addresses however -- so
** deliver should be called once for each address on the
** list.
**
** Parameters:
** e -- the envelope to deliver.
** firstto -- head of the address list to deliver to.
**
** Returns:
** zero -- successfully delivered.
** else -- some failure, see ExitStat for more info.
**
** Side Effects:
** The standard input is passed off to someone.
*/
deliver(e, firstto)
register ENVELOPE *e;
ADDRESS *firstto;
{
char *host; /* host being sent to */
char *user; /* user being sent to */
char **pvp;
register char **mvp;
register char *p;
register MAILER *m; /* mailer for this recipient */
ADDRESS *ctladdr;
register ADDRESS *to = firstto;
bool clever = FALSE; /* running user smtp to this mailer */
ADDRESS *tochain = NULL; /* chain of users in this mailer call */
int rcode; /* response code */
char *pv[MAXPV+1];
char tobuf[MAXLINE-50]; /* text line of to people */
char buf[MAXNAME];
char tfrombuf[MAXNAME]; /* translated from person */
extern bool checkcompat();
extern ADDRESS *getctladdr();
extern char *remotename();
errno = 0;
if (bitset(QDONTSEND, to->q_flags))
return (0);
/* unless interactive, try twice, over a minute */
if (OpMode == MD_DAEMON || OpMode == MD_SMTP) {
_res.retrans = 30;
_res.retry = 2;
}
m = to->q_mailer;
host = to->q_host;
# ifdef DEBUG
if (tTd(10, 1))
printf("\n--deliver, mailer=%d, host=`%s', first user=`%s'\n",
m->m_mno, host, to->q_user);
# endif DEBUG
/*
** If this mailer is expensive, and if we don't want to make
** connections now, just mark these addresses and return.
** This is useful if we want to batch connections to
** reduce load. This will cause the messages to be
** queued up, and a daemon will come along to send the
** messages later.
** This should be on a per-mailer basis.
*/
if (NoConnect && !QueueRun && bitnset(M_EXPENSIVE, m->m_flags) &&
!Verbose)
{
for (; to != NULL; to = to->q_next)
{
if (bitset(QDONTSEND, to->q_flags) || to->q_mailer != m)
continue;
to->q_flags |= QQUEUEUP|QDONTSEND;
e->e_to = to->q_paddr;
message(Arpa_Info, "queued");
if (LogLevel > 4)
logdelivery("queued");
}
e->e_to = NULL;
return (0);
}
/*
** Do initial argv setup.
** Insert the mailer name. Notice that $x expansion is
** NOT done on the mailer name. Then, if the mailer has
** a picky -f flag, we insert it as appropriate. This
** code does not check for 'pv' overflow; this places a
** manifest lower limit of 4 for MAXPV.
** The from address rewrite is expected to make
** the address relative to the other end.
*/
/* rewrite from address, using rewriting rules */
expand("\001f", buf, &buf[sizeof buf - 1], e);
(void) strcpy(tfrombuf, remotename(buf, m, TRUE, TRUE));
define('g', tfrombuf, e); /* translated sender address */
define('h', host, e); /* to host */
Errors = 0;
pvp = pv;
*pvp++ = m->m_argv[0];
/* insert -f or -r flag as appropriate */
if (FromFlag && (bitnset(M_FOPT, m->m_flags) || bitnset(M_ROPT, m->m_flags)))
{
if (bitnset(M_FOPT, m->m_flags))
*pvp++ = "-f";
else
*pvp++ = "-r";
expand("\001g", buf, &buf[sizeof buf - 1], e);
*pvp++ = newstr(buf);
}
/*
** Append the other fixed parts of the argv. These run
** up to the first entry containing "$u". There can only
** be one of these, and there are only a few more slots
** in the pv after it.
*/
for (mvp = m->m_argv; (p = *++mvp) != NULL; )
{
while ((p = index(p, '\001')) != NULL)
if (*++p == 'u')
break;
if (p != NULL)
break;
/* this entry is safe -- go ahead and process it */
expand(*mvp, buf, &buf[sizeof buf - 1], e);
*pvp++ = newstr(buf);
if (pvp >= &pv[MAXPV - 3])
{
syserr("Too many parameters to %s before $u", pv[0]);
return (-1);
}
}
/*
** If we have no substitution for the user name in the argument
** list, we know that we must supply the names otherwise -- and
** SMTP is the answer!!
*/
if (*mvp == NULL)
{
/* running SMTP */
# ifdef SMTP
clever = TRUE;
*pvp = NULL;
# else SMTP
/* oops! we don't implement SMTP */
syserr("SMTP style mailer");
return (EX_SOFTWARE);
# endif SMTP
}
/*
** At this point *mvp points to the argument with $u. We
** run through our address list and append all the addresses
** we can. If we run out of space, do not fret! We can
** always send another copy later.
*/
tobuf[0] = '\0';
e->e_to = tobuf;
ctladdr = NULL;
for (; to != NULL; to = to->q_next)
{
/* avoid sending multiple recipients to dumb mailers */
if (tobuf[0] != '\0' && !bitnset(M_MUSER, m->m_flags))
break;
/* if already sent or not for this host, don't send */
if (bitset(QDONTSEND, to->q_flags) ||
strcmp(to->q_host, host) != 0 ||
to->q_mailer != firstto->q_mailer)
continue;
/* avoid overflowing tobuf */
if (sizeof tobuf - (strlen(to->q_paddr) + strlen(tobuf) + 2) < 0)
break;
# ifdef DEBUG
if (tTd(10, 1))
{
printf("\nsend to ");
printaddr(to, FALSE);
}
# endif DEBUG
/* compute effective uid/gid when sending */
if (to->q_mailer == ProgMailer)
ctladdr = getctladdr(to);
user = to->q_user;
e->e_to = to->q_paddr;
to->q_flags |= QDONTSEND;
/*
** Check to see that these people are allowed to
** talk to each other.
*/
if (m->m_maxsize != 0 && e->e_msgsize > m->m_maxsize)
{
NoReturn = TRUE;
usrerr("Message is too large; %ld bytes max", m->m_maxsize);
giveresponse(EX_UNAVAILABLE, m, e);
continue;
}
if (!checkcompat(to))
{
giveresponse(EX_UNAVAILABLE, m, e);
continue;
}
/*
** Strip quote bits from names if the mailer is dumb
** about them.
*/
if (bitnset(M_STRIPQ, m->m_flags))
{
stripquotes(user, TRUE);
stripquotes(host, TRUE);
}
else
{
stripquotes(user, FALSE);
stripquotes(host, FALSE);
}
/* hack attack -- delivermail compatibility */
if (m == ProgMailer && *user == '|')
user++;
/*
** If an error message has already been given, don't
** bother to send to this address.
**
** >>>>>>>>>> This clause assumes that the local mailer
** >> NOTE >> cannot do any further aliasing; that
** >>>>>>>>>> function is subsumed by sendmail.
*/
if (bitset(QBADADDR|QQUEUEUP, to->q_flags))
continue;
/* save statistics.... */
markstats(e, to);
/*
** See if this user name is "special".
** If the user name has a slash in it, assume that this
** is a file -- send it off without further ado. Note
** that this type of addresses is not processed along
** with the others, so we fudge on the To person.
*/
if (m == LocalMailer)
{
if (user[0] == '/')
{
rcode = mailfile(user, getctladdr(to));
giveresponse(rcode, m, e);
continue;
}
}
/*
** Address is verified -- add this user to mailer
** argv, and add it to the print list of recipients.
*/
/* link together the chain of recipients */
to->q_tchain = tochain;
tochain = to;
/* create list of users for error messages */
(void) strcat(tobuf, ",");
(void) strcat(tobuf, to->q_paddr);
define('u', user, e); /* to user */
define('z', to->q_home, e); /* user's home */
/*
** Expand out this user into argument list.
*/
if (!clever)
{
expand(*mvp, buf, &buf[sizeof buf - 1], e);
*pvp++ = newstr(buf);
if (pvp >= &pv[MAXPV - 2])
{
/* allow some space for trailing parms */
break;
}
}
}
/* see if any addresses still exist */
if (tobuf[0] == '\0')
{
define('g', (char *) NULL, e);
return (0);
}
/* print out messages as full list */
e->e_to = tobuf + 1;
/*
** Fill out any parameters after the $u parameter.
*/
while (!clever && *++mvp != NULL)
{
expand(*mvp, buf, &buf[sizeof buf - 1], e);
*pvp++ = newstr(buf);
if (pvp >= &pv[MAXPV])
syserr("deliver: pv overflow after $u for %s", pv[0]);
}
*pvp++ = NULL;
/*
** Call the mailer.
** The argument vector gets built, pipes
** are created as necessary, and we fork & exec as
** appropriate.
** If we are running SMTP, we just need to clean up.
*/
if (ctladdr == NULL)
ctladdr = &e->e_from;
_res.options &= ~(RES_DEFNAMES | RES_DNSRCH); /* XXX */
#ifdef SMTP
if (clever)
{
#ifdef MXDOMAIN
/*
** Let makeconnection handle [a.b.c.d] address
** specifications -- getmxrr gets confused by them ...
*/
if (host[0] != '[')
{
expand("\001w", buf, &buf[sizeof buf - 1], e);
if ((Nmx = getmxrr(host, MxHosts, MAXMXHOSTS, buf)) < 0)
{
/*
* Map errors into standard values
*/
if (Nmx == -1)
rcode = EX_TEMPFAIL;
else if (Nmx == -3)
rcode = EX_NOHOST;
else
rcode = EX_UNAVAILABLE;
}
else
rcode = EX_OK;
}
else
#endif MXDOMAIN
{
Nmx = 1;
MxHosts[0] = host;
rcode = EX_OK;
}
/* send the initial SMTP protocol */
if (rcode == EX_OK)
{
rcode = smtpinit(m, pv);
/* Added some delivering of mail via
* SMTP... LY&&JB 93Jan30
*/
if (rcode == EX_OK)
{
/* send the recipient list */
tobuf[0] = '\0';
for (to = tochain; to != NULL; to = to->q_tchain)
{
int i;
e->e_to = to->q_paddr;
i = smtprcpt(to, m);
if (i != EX_OK)
{
markfailure(e, to, i);
giveresponse(i, m, e);
}
else
{
(void) strcat(tobuf, ",");
(void) strcat(tobuf, to->q_paddr);
}
}
/* now send the data */
if (tobuf[0] == '\0')
e->e_to = NULL;
else
{
e->e_to = tobuf + 1;
rcode = smtpdata(m, e);
}
/* now close the connection */
smtpquit(m);
}
}
}
else
#endif /* SMTP */
{
message(Arpa_Info, "Connecting to %s (%s)...", host, m->m_name);
rcode = sendoff(e, m, pv, ctladdr);
}
_res.options |= RES_DEFNAMES | RES_DNSRCH; /* XXX */
/*
** Do final status disposal.
** We check for something in tobuf for the SMTP case.
** If we got a temporary failure, arrange to queue the
** addressees.
*/
if (tobuf[0] != '\0')
giveresponse(rcode, m, e);
if (rcode != EX_OK)
for (to = tochain; to != NULL; to = to->q_tchain)
markfailure(e, to, rcode);
errno = 0;
define('g', (char *) NULL, e);
return (rcode);
}
/*
** MARKFAILURE -- mark a failure on a specific address.
**
** Parameters:
** e -- the envelope we are sending.
** q -- the address to mark.
** rcode -- the code signifying the particular failure.
**
** Returns:
** none.
**
** Side Effects:
** marks the address (and possibly the envelope) with the
** failure so that an error will be returned or
** the message will be queued, as appropriate.
*/
markfailure(e, q, rcode)
register ENVELOPE *e;
register ADDRESS *q;
int rcode;
{
if (rcode == EX_OK)
return;
else if (rcode != EX_TEMPFAIL)
q->q_flags |= QBADADDR;
else if (curtime() > e->e_ctime + TimeOut)
{
extern char *pintvl();
char buf[MAXLINE];
if (!bitset(EF_TIMEOUT, e->e_flags))
{
(void) sprintf(buf, "Cannot send message for %s",
pintvl(TimeOut, FALSE));
if (e->e_message != NULL)
free(e->e_message);
e->e_message = newstr(buf);
message(Arpa_Info, buf);
}
q->q_flags |= QBADADDR;
e->e_flags |= EF_TIMEOUT;
}
else
q->q_flags |= QQUEUEUP;
}
/*
** DOFORK -- do a fork, retrying a couple of times on failure.
**
** This MUST be a macro, since after a vfork we are running
** two processes on the same stack!!!
**
** Parameters:
** none.
**
** Returns:
** From a macro??? You've got to be kidding!
**
** Side Effects:
** Modifies the ==> LOCAL <== variable 'pid', leaving:
** pid of child in parent, zero in child.
** -1 on unrecoverable error.
**
** Notes:
** I'm awfully sorry this looks so awful. That's
** vfork for you.....
*/
# define NFORKTRIES 5
# ifdef VMUNIX
# define XFORK vfork
# else VMUNIX
# define XFORK fork
# endif VMUNIX
# define DOFORK(fORKfN) \
{\
register int i;\
\
for (i = NFORKTRIES; --i >= 0; )\
{\
pid = fORKfN();\
if (pid >= 0)\
break;\
if (i > 0)\
sleep((unsigned) NFORKTRIES - i);\
}\
}
/*
** DOFORK -- simple fork interface to DOFORK.
**
** Parameters:
** none.
**
** Returns:
** pid of child in parent.
** zero in child.
** -1 on error.
**
** Side Effects:
** returns twice, once in parent and once in child.
*/
dofork()
{
register int pid;
DOFORK(fork);
return (pid);
}
/*
** SENDOFF -- send off call to mailer & collect response.
**
** Parameters:
** e -- the envelope to mail.
** m -- mailer descriptor.
** pvp -- parameter vector to send to it.
** ctladdr -- an address pointer controlling the
** user/groupid etc. of the mailer.
**
** Returns:
** exit status of mailer.
**
** Side Effects:
** none.
*/
static
sendoff(e, m, pvp, ctladdr)
register ENVELOPE *e;
MAILER *m;
char **pvp;
ADDRESS *ctladdr;
{
auto FILE *mfile;
auto FILE *rfile;
register int i;
int pid;
/*
** Create connection to mailer.
*/
pid = openmailer(m, pvp, ctladdr, FALSE, &mfile, &rfile);
if (pid < 0)
return (-1);
/*
** Format and send message.
*/
putfromline(mfile, m);
(*e->e_puthdr)(mfile, m, e);
putline("\n", mfile, m);
(*e->e_putbody)(mfile, m, e);
(void) fclose(mfile);
i = endmailer(pid, pvp[0]);
/* arrange a return receipt if requested */
if (e->e_receiptto != NULL && bitnset(M_LOCAL, m->m_flags))
{
e->e_flags |= EF_SENDRECEIPT;
/* do we want to send back more info? */
}
return (i);
}
/*
** ENDMAILER -- Wait for mailer to terminate.
**
** We should never get fatal errors (e.g., segmentation
** violation), so we report those specially. For other
** errors, we choose a status message (into statmsg),
** and if it represents an error, we print it.
**
** Parameters:
** pid -- pid of mailer.
** name -- name of mailer (for error messages).
**
** Returns:
** exit code of mailer.
**
** Side Effects:
** none.
*/
endmailer(pid, name)
int pid;
char *name;
{
int st;
/* in the IPC case there is nothing to wait for */
if (pid == 0)
return (EX_OK);
/* wait for the mailer process to die and collect status */
st = waitfor(pid);
if (st == -1)
{
syserr("endmailer %s: wait", name);
return (EX_SOFTWARE);
}
/* see if it died a horrid death */
if ((st & 0377) != 0)
{
syserr("mailer %s died with signal %o", name, st);
ExitStat = EX_TEMPFAIL;
return (EX_TEMPFAIL);
}
/* normal death -- return status */
st = (st >> 8) & 0377;
return (st);
}
/*
** OPENMAILER -- open connection to mailer.
**
** Parameters:
** m -- mailer descriptor.
** pvp -- parameter vector to pass to mailer.
** ctladdr -- controlling address for user.
** clever -- create a full duplex connection.
** pmfile -- pointer to mfile (to mailer) connection.
** prfile -- pointer to rfile (from mailer) connection.
**
** Returns:
** pid of mailer ( > 0 ).
** -1 on error.
** zero on an IPC connection.
**
** Side Effects:
** creates a mailer in a subprocess.
*/
openmailer(m, pvp, ctladdr, clever, pmfile, prfile)
MAILER *m;
char **pvp;
ADDRESS *ctladdr;
bool clever;
FILE **pmfile;
FILE **prfile;
{
int pid;
int mpvect[2];
int rpvect[2];
FILE *mfile;
FILE *rfile;
extern FILE *fdopen();
# ifdef DEBUG
if (tTd(11, 1))
{
printf("openmailer:");
printav(pvp);
}
# endif DEBUG
errno = 0;
CurHostName = m->m_mailer;
/*
** Deal with the special case of mail handled through an IPC
** connection.
** In this case we don't actually fork. We must be
** running SMTP for this to work. We will return a
** zero pid to indicate that we are running IPC.
** We also handle a debug version that just talks to stdin/out.
*/
#ifdef DEBUG
/* check for Local Person Communication -- not for mortals!!! */
if (strcmp(m->m_mailer, "[LPC]") == 0)
{
*pmfile = stdout;
*prfile = stdin;
return (0);
}
#endif DEBUG
if (strcmp(m->m_mailer, "[IPC]") == 0)
{
#ifdef HOSTINFO
register STAB *st;
extern STAB *stab();
#endif HOSTINFO
#ifdef DAEMON
register int i, j;
register u_short port;
CurHostName = pvp[1];
if (!clever)
syserr("non-clever IPC");
if (pvp[2] != NULL)
port = atoi(pvp[2]);
else
port = 0;
for (j = 0; j < Nmx; j++)
{
CurHostName = MxHosts[j];
#ifdef HOSTINFO
/* see if we have already determined that this host is fried */
st = stab(MxHosts[j], ST_HOST, ST_FIND);
if (st == NULL || st->s_host.ho_exitstat == EX_OK) {
if (j > 1)
message(Arpa_Info,
"Connecting to %s (%s)...",
MxHosts[j], m->m_name);
i = makeconnection(MxHosts[j], port, pmfile, prfile);
}
else
{
i = st->s_host.ho_exitstat;
errno = st->s_host.ho_errno;
}
#else HOSTINFO
i = makeconnection(MxHosts[j], port, pmfile, prfile);
#endif HOSTINFO
if (i != EX_OK)
{
#ifdef HOSTINFO
/* enter status of this host */
if (st == NULL)
st = stab(MxHosts[j], ST_HOST, ST_ENTER);
st->s_host.ho_exitstat = i;
st->s_host.ho_errno = errno;
#endif HOSTINFO
ExitStat = i;
continue;
}
else
return (0);
}
return (-1);
#else DAEMON
syserr("openmailer: no IPC");
return (-1);
#endif DAEMON
}
/* create a pipe to shove the mail through */
if (pipe(mpvect) < 0)
{
syserr("openmailer: pipe (to mailer)");
return (-1);
}
#ifdef SMTP
/* if this mailer speaks smtp, create a return pipe */
if (clever && pipe(rpvect) < 0)
{
syserr("openmailer: pipe (from mailer)");
(void) close(mpvect[0]);
(void) close(mpvect[1]);
return (-1);
}
#endif SMTP
/*
** Actually fork the mailer process.
** DOFORK is clever about retrying.
**
** Dispose of SIGCHLD signal catchers that may be laying
** around so that endmail will get it.
*/
if (CurEnv->e_xfp != NULL)
(void) fflush(CurEnv->e_xfp); /* for debugging */
(void) fflush(stdout);
# ifdef SIGCHLD
(void) signal(SIGCHLD, SIG_DFL);
# endif SIGCHLD
DOFORK(XFORK);
/* pid is set by DOFORK */
if (pid < 0)
{
/* failure */
syserr("openmailer: cannot fork");
(void) close(mpvect[0]);
(void) close(mpvect[1]);
#ifdef SMTP
if (clever)
{
(void) close(rpvect[0]);
(void) close(rpvect[1]);
}
#endif SMTP
return (-1);
}
else if (pid == 0)
{
int i;
extern int DtableSize;
/* child -- set up input & exec mailer */
/* make diagnostic output be standard output */
(void) signal(SIGINT, SIG_IGN);
(void) signal(SIGHUP, SIG_IGN);
(void) signal(SIGTERM, SIG_DFL);
/* arrange to filter standard & diag output of command */
if (clever)
{
(void) close(rpvect[0]);
(void) close(1);
(void) dup(rpvect[1]);
(void) close(rpvect[1]);
}
else if (OpMode == MD_SMTP || HoldErrs)
{
/* put mailer output in transcript */
(void) close(1);
(void) dup(fileno(CurEnv->e_xfp));
}
(void) close(2);
(void) dup(1);
/* arrange to get standard input */
(void) close(mpvect[1]);
(void) close(0);
if (dup(mpvect[0]) < 0)
{
syserr("Cannot dup to zero!");
_exit(EX_OSERR);
}
(void) close(mpvect[0]);
if (!bitnset(M_RESTR, m->m_flags))
{
if (ctladdr == NULL || ctladdr->q_uid == 0)
{
(void) setgid(DefGid);
(void) setuid(DefUid);
}
else
{
(void) setgid(ctladdr->q_gid);
(void) setuid(ctladdr->q_uid);
}
}
/* arrange for all the files to be closed */
for (i = 3; i < DtableSize; i++)
(void) ioctl(i, FIOCLEX, 0);
/* try to execute the mailer */
execve(m->m_mailer, pvp, UserEnviron);
syserr("Cannot exec %s", m->m_mailer);
if (m == LocalMailer || errno == EIO || errno == EAGAIN ||
errno == ENOMEM || errno == EPROCLIM)
_exit(EX_TEMPFAIL);
else
_exit(EX_UNAVAILABLE);
}
/*
** Set up return value.
*/
(void) close(mpvect[0]);
mfile = fdopen(mpvect[1], "w");
if (clever)
{
(void) close(rpvect[1]);
rfile = fdopen(rpvect[0], "r");
}
*pmfile = mfile;
*prfile = rfile;
return (pid);
}
/*
** GIVERESPONSE -- Interpret an error response from a mailer
**
** Parameters:
** stat -- the status code from the mailer (high byte
** only; core dumps must have been taken care of
** already).
** m -- the mailer descriptor for this mailer.
**
** Returns:
** none.
**
** Side Effects:
** Errors may be incremented.
** ExitStat may be set.
*/
giveresponse(stat, m, e)
int stat;
register MAILER *m;
ENVELOPE *e;
{
register char *statmsg;
extern char *SysExMsg[];
register int i;
extern int N_SysEx, h_errno;
char buf[MAXLINE];
#ifdef lint
if (m == NULL)
return;
#endif lint
/*
** Compute status message from code.
*/
i = stat - EX__BASE;
if (stat == 0)
statmsg = "250 Sent";
else if (i < 0 || i > N_SysEx)
{
(void) sprintf(buf, "554 unknown mailer error %d", stat);
stat = EX_UNAVAILABLE;
statmsg = buf;
}
else if (stat == EX_TEMPFAIL)
{
(void) strcpy(buf, SysExMsg[i]);
if (h_errno == TRY_AGAIN)
{
extern char *errstring();
statmsg = errstring(h_errno+MAX_ERRNO);
}
else
{
if (errno != 0)
{
extern char *errstring();
statmsg = errstring(errno);
}
else
{
#ifdef SMTP
extern char SmtpError[];
statmsg = SmtpError;
#else SMTP
statmsg = NULL;
#endif SMTP
}
}
if (statmsg != NULL && statmsg[0] != '\0')
{
(void) strcat(buf, ": ");
(void) strcat(buf, statmsg);
}
statmsg = buf;
}
else
{
statmsg = SysExMsg[i];
}
/*
** Print the message as appropriate
*/
if (stat == EX_OK || stat == EX_TEMPFAIL)
message(Arpa_Info, &statmsg[4]);
else
{
Errors++;
usrerr(statmsg);
}
/*
** Final cleanup.
** Log a record of the transaction. Compute the new
** ExitStat -- if we already had an error, stick with
** that.
*/
if (LogLevel > ((stat == 0 || stat == EX_TEMPFAIL) ? 3 : 2))
logdelivery(&statmsg[4]);
if (stat != EX_TEMPFAIL)
setstat(stat);
if (stat != EX_OK)
{
if (e->e_message != NULL)
free(e->e_message);
e->e_message = newstr(&statmsg[4]);
}
errno = 0;
h_errno = 0;
}
/*
** LOGDELIVERY -- log the delivery in the system log
**
** Parameters:
** stat -- the message to print for the status
**
** Returns:
** none
**
** Side Effects:
** none
*/
logdelivery(stat)
char *stat;
{
extern char *pintvl();
# ifdef LOG
syslog(LOG_INFO, "%s: to=%s, delay=%s, stat=%s", CurEnv->e_id,
CurEnv->e_to, pintvl(curtime() - CurEnv->e_ctime, TRUE), stat);
# endif LOG
}
/*
** PUTFROMLINE -- output a UNIX-style from line (or whatever)
**
** This can be made an arbitrary message separator by changing $l
**
** One of the ugliest hacks seen by human eyes is contained herein:
** UUCP wants those stupid "remote from <host>" lines. Why oh why
** does a well-meaning programmer such as myself have to deal with
** this kind of antique garbage????
**
** Parameters:
** fp -- the file to output to.
** m -- the mailer describing this entry.
**
** Returns:
** none
**
** Side Effects:
** outputs some text to fp.
*/
putfromline(fp, m)
register FILE *fp;
register MAILER *m;
{
char *template = "\001l\n";
char buf[MAXLINE];
if (bitnset(M_NHDR, m->m_flags))
return;
# ifdef UGLYUUCP
if (bitnset(M_UGLYUUCP, m->m_flags))
{
char *bang;
char xbuf[MAXLINE];
expand("\001g", buf, &buf[sizeof buf - 1], CurEnv);
bang = index(buf, '!');
if (bang == NULL)
syserr("No ! in UUCP! (%s)", buf);
else
{
*bang++ = '\0';
(void) sprintf(xbuf, "From %s \001d remote from %s\n", bang, buf);
template = xbuf;
}
}
# endif UGLYUUCP
expand(template, buf, &buf[sizeof buf - 1], CurEnv);
putline(buf, fp, m);
}
/*
** PUTBODY -- put the body of a message.
**
** Parameters:
** fp -- file to output onto.
** m -- a mailer descriptor to control output format.
** e -- the envelope to put out.
**
** Returns:
** none.
**
** Side Effects:
** The message is written onto fp.
*/
putbody(fp, m, e)
FILE *fp;
MAILER *m;
register ENVELOPE *e;
{
char buf[MAXLINE];
/*
** Output the body of the message
*/
if (e->e_dfp == NULL)
{
if (e->e_df != NULL)
{
e->e_dfp = fopen(e->e_df, "r");
if (e->e_dfp == NULL)
syserr("Cannot open %s", e->e_df);
}
else
putline("<<< No Message Collected >>>", fp, m);
}
if (e->e_dfp != NULL)
{
rewind(e->e_dfp);
while (!ferror(fp) && fgets(buf, sizeof buf, e->e_dfp) != NULL)
{
if (buf[0] == 'F' && bitnset(M_ESCFROM, m->m_flags) &&
strncmp(buf, "From", 4) == 0)
(void) putc('>', fp);
putline(buf, fp, m);
}
if (ferror(e->e_dfp))
{
syserr("putbody: read error");
ExitStat = EX_IOERR;
}
}
(void) fflush(fp);
if (ferror(fp) && errno != EPIPE)
{
syserr("putbody: write error");
ExitStat = EX_IOERR;
}
errno = 0;
}
/*
** MAILFILE -- Send a message to a file.
**
** If the file has the setuid/setgid bits set, but NO execute
** bits, sendmail will try to become the owner of that file
** rather than the real user. Obviously, this only works if
** sendmail runs as root.
**
** This could be done as a subordinate mailer, except that it
** is used implicitly to save messages in ~/dead.letter. We
** view this as being sufficiently important as to include it
** here. For example, if the system is dying, we shouldn't have
** to create another process plus some pipes to save the message.
**
** Parameters:
** filename -- the name of the file to send to.
** ctladdr -- the controlling address header -- includes
** the userid/groupid to be when sending.
**
** Returns:
** The exit code associated with the operation.
**
** Side Effects:
** none.
*/
mailfile(filename, ctladdr)
char *filename;
ADDRESS *ctladdr;
{
register FILE *f;
register int pid;
/*
** Fork so we can change permissions here.
** Note that we MUST use fork, not vfork, because of
** the complications of calling subroutines, etc.
*/
DOFORK(fork);
if (pid < 0)
return (EX_OSERR);
else if (pid == 0)
{
/* child -- actually write to file */
struct stat stb;
(void) signal(SIGINT, SIG_DFL);
(void) signal(SIGHUP, SIG_DFL);
(void) signal(SIGTERM, SIG_DFL);
(void) umask(OldUmask);
if (stat(filename, &stb) < 0)
{
errno = 0;
stb.st_mode = 0666;
}
if (bitset(0111, stb.st_mode))
exit(EX_CANTCREAT);
if (ctladdr == NULL)
ctladdr = &CurEnv->e_from;
if (!bitset(S_ISGID, stb.st_mode) || setgid(stb.st_gid) < 0)
{
if (ctladdr->q_uid == 0)
(void) setgid(DefGid);
else
(void) setgid(ctladdr->q_gid);
}
if (!bitset(S_ISUID, stb.st_mode) || setuid(stb.st_uid) < 0)
{
if (ctladdr->q_uid == 0)
(void) setuid(DefUid);
else
(void) setuid(ctladdr->q_uid);
}
f = dfopen(filename, "a");
if (f == NULL)
exit(EX_CANTCREAT);
putfromline(f, ProgMailer);
(*CurEnv->e_puthdr)(f, ProgMailer, CurEnv);
putline("\n", f, ProgMailer);
(*CurEnv->e_putbody)(f, ProgMailer, CurEnv);
putline("\n", f, ProgMailer);
(void) fclose(f);
(void) fflush(stdout);
/* reset ISUID & ISGID bits for paranoid systems */
(void) chmod(filename, (int) stb.st_mode);
exit(EX_OK);
/*NOTREACHED*/
}
else
{
/* parent -- wait for exit status */
int st;
st = waitfor(pid);
if ((st & 0377) != 0)
return (EX_UNAVAILABLE);
else
return ((st >> 8) & 0377);
}
}
/*
** SENDALL -- actually send all the messages.
**
** Parameters:
** e -- the envelope to send.
** mode -- the delivery mode to use. If SM_DEFAULT, use
** the current SendMode.
**
** Returns:
** none.
**
** Side Effects:
** Scans the send lists and sends everything it finds.
** Delivers any appropriate error messages.
** If we are running in a non-interactive mode, takes the
** appropriate action.
*/
sendall(e, mode)
ENVELOPE *e;
char mode;
{
register ADDRESS *q;
bool oldverbose;
int pid;
/* determine actual delivery mode */
if (mode == SM_DEFAULT)
{
extern bool shouldqueue();
if (shouldqueue(e->e_msgpriority))
mode = SM_QUEUE;
else
mode = SendMode;
}
#ifdef DEBUG
if (tTd(13, 1))
{
printf("\nSENDALL: mode %c, sendqueue:\n", mode);
printaddr(e->e_sendqueue, TRUE);
}
#endif DEBUG
/*
** Do any preprocessing necessary for the mode we are running.
** Check to make sure the hop count is reasonable.
** Delete sends to the sender in mailing lists.
*/
CurEnv = e;
if (e->e_hopcount > MAXHOP)
{
syserr("sendall: too many hops (%d max)", MAXHOP);
return;
}
if (!MeToo)
{
extern ADDRESS *recipient();
e->e_from.q_flags |= QDONTSEND;
(void) recipient(&e->e_from, &e->e_sendqueue);
}
# ifdef QUEUE
if ((mode == SM_QUEUE || mode == SM_FORK ||
(mode != SM_VERIFY && SuperSafe)) &&
!bitset(EF_INQUEUE, e->e_flags))
queueup(e, TRUE, mode == SM_QUEUE);
#endif QUEUE
oldverbose = Verbose;
switch (mode)
{
case SM_VERIFY:
Verbose = TRUE;
break;
case SM_QUEUE:
e->e_flags |= EF_INQUEUE|EF_KEEPQUEUE;
return;
case SM_FORK:
if (e->e_xfp != NULL)
(void) fflush(e->e_xfp);
pid = fork();
if (pid < 0)
{
mode = SM_DELIVER;
break;
}
else if (pid > 0)
{
/* be sure we leave the temp files to our child */
e->e_id = e->e_df = NULL;
return;
}
/* double fork to avoid zombies */
if (fork() > 0)
exit(EX_OK);
/* be sure we are immune from the terminal */
disconnect(FALSE);
break;
}
/*
** Run through the list and send everything.
*/
for (q = e->e_sendqueue; q != NULL; q = q->q_next)
{
if (mode == SM_VERIFY)
{
e->e_to = q->q_paddr;
if (!bitset(QDONTSEND|QBADADDR, q->q_flags))
message(Arpa_Info, "deliverable");
}
else
(void) deliver(e, q);
}
Verbose = oldverbose;
/*
** Now run through and check for errors.
*/
if (mode == SM_VERIFY)
return;
for (q = e->e_sendqueue; q != NULL; q = q->q_next)
{
register ADDRESS *qq;
# ifdef DEBUG
if (tTd(13, 3))
{
printf("Checking ");
printaddr(q, FALSE);
}
# endif DEBUG
/* only send errors if the message failed */
if (!bitset(QBADADDR, q->q_flags))
continue;
/* we have an address that failed -- find the parent */
for (qq = q; qq != NULL; qq = qq->q_alias)
{
char obuf[MAXNAME + 6];
extern char *aliaslookup();
/* we can only have owners for local addresses */
if (!bitnset(M_LOCAL, qq->q_mailer->m_flags))
continue;
/* see if the owner list exists */
(void) strcpy(obuf, "owner-");
if (strncmp(qq->q_user, "owner-", 6) == 0)
(void) strcat(obuf, "owner");
else
(void) strcat(obuf, qq->q_user);
if (aliaslookup(obuf) == NULL)
continue;
# ifdef DEBUG
if (tTd(13, 4))
printf("Errors to %s\n", obuf);
# endif DEBUG
/* owner list exists -- add it to the error queue */
sendtolist(obuf, (ADDRESS *) NULL, &e->e_errorqueue);
ErrorMode = EM_MAIL;
break;
}
/* if we did not find an owner, send to the sender */
if (qq == NULL && bitset(QBADADDR, q->q_flags))
sendtolist(e->e_from.q_paddr, qq, &e->e_errorqueue);
}
if (mode == SM_FORK)
finis();
}