2.9BSD/usr/net/sys/TSCB/l.s

Compare this file to the similar file:
Show the results in this format: 

/*
 *	SCCS id	@(#)l.s	1.5 (Berkeley)	3/14/83
 *
 *	Low Core
 *
 */

#define		LOCORE
#include	"whoami.h"		/* for localopts */
#include	<sys/trap.h>
#include	<sys/iopage.m>
#include	<sys/koverlay.h>	/* for definition of OVLY_TABLE_BASE */

#include "dh.h"
#include "dz.h"
#include "hk.h"
#include "hp.h"
#include "kl.h"
#include "tm.h"
#include "xp.h"

#ifdef UCB_NET
#include "il.h"
#include "sri.h"
#endif UCB_NET


	.globl	call, trap, buserr, start, _panic
#ifdef	NONFP
	.globl	instrap
#else
#	define	instrap		trap
#endif
#ifdef	MENLO_OVLY
	.globl	emt
#else
#	define	emt		trap
#endif
#ifdef	UCB_AUTOBOOT
	.globl	powrdown
#else
#	define	powrdown	trap
#endif

#ifndef	KERN_NONSEP
	.data
#endif

ZERO:

br4 = 200
br5 = 240
br6 = 300
br7 = 340

. = ZERO+0
#ifdef	KERN_NONSEP
	/  If vectors at 110 and 444 are unused,
	/  autoconfig will set these to something more reasonable.
	/  On jump, this will branch to 112, which branches to 50.
	/  On trap, will vector to 444, where a ZEROTRAP will be simulated.
	42				/ illegal instruction if jump
	777				/ trace trap at high priority if trap
#else
	trap; br7+ZEROTRAP.		/ trap-to-zero trap
#endif

/ trap vectors
. = ZERO+4
	buserr; br7+BUSFLT.		/ bus error
	instrap; br7+INSTRAP.		/ illegal instruction
	trap; br7+BPTTRAP.		/ bpt-trace trap
	trap; br7+IOTTRAP.		/ iot trap
	powrdown; br7+POWRFAIL.		/ power fail
	emt; br7+EMTTRAP.		/ emulator trap
	start;br7+SYSCALL.		/ system  (overlaid by 'syscall')

. = ZERO+40
#ifdef	UCB_AUTOBOOT
.globl	do_panic
	jmp	do_panic
#else
	br	.
#endif

.globl	 dump
. = ZERO+44
	jmp	dump
#ifdef	KERN_NONSEP
	/  Handler for jump-to-zero panic.
. = ZERO+50
	mov	$zjmp, -(sp)
	jsr	pc, _panic
#endif

. = ZERO+60
	klin; br4
	klou; br4

. = ZERO+100
	kwlp; br6
	kwlp; br6

. = ZERO+114
	trap; br7+PARITYFLT.		/ 11/70 parity
	trap; br7+SEGFLT.		/ segmentation violation

. = ZERO+150
#if	NXP > 0
	xpio; br5
#else
#if	NHP > 0
	hpio; br5
#else
#if	NRM > 0
	rmio; br5
#endif
#endif
#endif

#if	NRL > 0
. = ZERO+160
	rlio; br5
#endif

#if	NHK > 0
. = ZERO+210
	hkio; br5
#endif

#if	NRK > 0
. = ZERO+220
	rkio; br5
#endif

. = ZERO+240
	trap; br7+PIRQ.			/ programmed interrupt
	trap; br7+ARITHTRAP.		/ floating point
	trap; br7+SEGFLT.		/ segmentation violation

#if	NHP > 0
. = ZERO+254
	hpio; br5
#endif

/ floating vectors
#ifdef	UCB_NET
#if	NSRI > 0
. = ZERO+340
	srou; br5+0.
	srin; br5+0.
#endif

#if	NIL > 0
. = ZERO+350
	ilin; br5+0.
	ilcm; br5+0.
#endif
#endif	UCB_NET

. = ZERO + 1000
endvec = .				/ endvec should be past vector space
					/ (if NONSEP, should be at least 450)

#ifdef	MENLO_KOV
/ overlay descriptor tables
. = ZERO+OVLY_TABLE_BASE
.globl	ova, ovd, ovend
ova:	.=.+20				/ overlay addresses
ovd:	.=.+20				/ overlay sizes
ovend:	.=.+2				/ end of overlays
#endif

//////////////////////////////////////////////////////
/		interface code to C
//////////////////////////////////////////////////////

#ifndef	KERN_NONSEP
.text
	/  This is text location 0 for separate I/D kernels.
	mov	$zjmp, -(sp)
	jsr	pc, _panic
	/*NOTREACHED*/

	/  Unmap is called from _doboot to turn off memory management.
	/  The "return" is arranged by putting a jmp at unmap+2 (data space).

	reset=	5
	.globl unmap
unmap:
	reset
	/  The next instruction executed is from unmap+2 in physical memory,
	/  which is unmap+2 in data space.

#endif	KERN_NONSEP

	.data
zjmp:	<jump to 0\0>
	.text

/  CGOOD and CBAD are used by autoconfig.
/  All unused vectors are set to CBAD
/  before probing the devices.

.globl	CGOOD, CBAD, _conf_int
	rtt = 6
CGOOD:	mov	$1, _conf_int ; rtt
CBAD:	mov	$-1,_conf_int ; rtt

.globl	_klrint
klin:	jsr	r0,call; jmp _klrint
.globl	_klxint
klou:	jsr	r0,call; jmp _klxint

.globl	_clock
kwlp:	jsr	r0,call; jmp _clock

#if	NDH > 0
.globl	_dhrint
dhin:	jsr	r0,call; jmp _dhrint
.globl	_dhxint
dhou:	jsr	r0,call; jmp _dhxint
#endif

#if	NDM > 0
.globl	_dmintr
dmin:	jsr	r0,call; jmp _dmintr
#endif

#if	NDZ > 0
.globl	_dzrint
dzin:	jsr	r0,call; jmp _dzrint
#ifndef	DZ_PDMA
.globl	_dzxint
dzou:	jsr	r0,call; jmp _dzxint
#endif	DZ_PDMA
#endif	NDZ

#if	NHK > 0
.globl	_hkintr
hkio:	jsr	r0,call; jmp _hkintr
#endif

#if	NHP > 0
.globl	_hpintr
hpio:	jsr	r0,call; jmp _hpintr
#endif

#if	NHS > 0
.globl	_hsintr
hsio:	jsr	r0,call; jmp _hsintr
#endif

#if	NHT > 0
.globl	_htintr
htio:	jsr	r0,call; jmp _htintr
#endif

#if	NLP > 0
.globl	_lpintr
lpio:	jsr	r0,call; jmp _lpintr
#endif

#if	NRK > 0
.globl	_rkintr
rkio:	jsr	r0,call; jmp _rkintr
#endif

#if	NRL > 0
.globl	_rlintr
rlio:	jsr	r0,call; jmp _rlintr
#endif

#if	NRM > 0
.globl	_rmintr
rmio:	jsr	r0,call; jmp _rmintr
#endif

#if	NRP > 0
.globl	_rpintr
rpio:	jsr	r0,call; jmp _rpintr
#endif

#if	NTM > 0
.globl	_tmintr
tmio:	jsr	r0,call; jmp _tmintr
#endif

#if	NTS > 0
.globl	_tsintr
tsio:	jsr	r0,call; jmp _tsintr
#endif

#if	NVP > 0
.globl	_vpintr
vpio:	jsr	r0,call; jmp _vpintr
#endif

#if	NXP > 0
.globl	_xpintr
xpio:	jsr	r0,call; jmp _xpintr
#endif

#ifdef UCB_NET
#if	NSRI > 0
.globl	_srixint,_srirint
srin:	jsr	r0,call; jmp _srirint
srou:	jsr	r0,call; jmp _srixint
#endif

#if	NIL > 0
.globl	_ilrint,_ilcint
ilin:	jsr	r0,call; jmp _ilrint
ilcm:	jsr	r0,call; jmp _ilcint
#endif
#endif UCB_NET