2.9BSD/usr/src/sys/conf/genassym.c

/*
 *	SCCS id	@(#)genassym.c	1.5 (Berkeley)	3/14/83
 */
#include <stdio.h>
#include "whoami.h"
#include "param.h"
#include <sys/proc.h>
#include <sys/dir.h>
#include <sys/inode.h>
#include <sys/user.h>
#include <sys/seg.h>
#ifdef	UCB_METER
#include <sys/vm.h>
#include "dz.h"
#endif

main()
{
	register struct user *u = (struct user *)0;
	register struct segm *se = (struct segm *)0;
#ifdef	UCB_METER
	register struct vmrate *vm = (struct vmrate *)0;
#endif

	printf("/ Offsets:\n\n");
#ifdef	MENLO_OVLY
	printf("U_CUROV	= %o\n",&u->u_ovdata.uo_curov);
	printf("U_OVBASE = %o\n",&u->u_ovdata.uo_ovbase);
#endif
#ifdef	NONFP
	printf("U_SIGILL = %o\n", &(u->u_signal[SIGILL]));
#ifdef	UCB_METER
	printf("V_TRAP	= %o\n",&vm->v_trap);
#endif
#endif

#ifdef	UCB_METER
	printf("V_INTR	= %o\n",&vm->v_intr);
#ifdef	DZ_PDMA
	printf("V_PDMA	= %o\n",&vm->v_pdma);
#endif
#ifdef	MENLO_OVLY
	printf("V_OVLY	= %o\n",&vm->v_ovly);
#endif
#endif
	printf("SE_ADDR	= %o\n", &se->se_addr);
	printf("SE_DESC	= %o\n", &se->se_desc);

	printf("\n/ Compilation option settings.\n");
	printf("/ These are here so they will appear in the namelist.\n\n");
#if	PDP11==GENERIC
	printf("PDP11 = 0\t\t/ GENERIC\n");
#else
	printf("PDP11 = %d.\n", PDP11);
#endif
#ifdef	NONSEPARATE
	printf("NONSEPARATE = 1\n");
#else
	printf("NONSEPARATE = 0\n");
#endif
#ifdef	KERN_NONSEP
	printf("KERN_NONSEP = 1\n");
#else
	printf("KERN_NONSEP = 0\n");
#endif
#ifdef	UNIBUS_MAP
	printf("UNIBUS_MAP = 1\n");
#else
	printf("UNIBUS_MAP = 0\n");
#endif
#ifdef	MENLO_KOV
	printf("MENLO_KOV = 1\n");
#else
	printf("MENLO_KOV = 0\n");
#endif
#ifdef	NONFP
	printf("NONFP = 1\n");
#else
	printf("NONFP = 0\n");
#endif
#ifdef	SMALL
	printf("SMALL = 1\n");
#else
	printf("SMALL = 0\n");
#endif
#ifdef	UCB_QUOTAS
	printf("UCB_QUOTAS = 1\n");
#else
	printf("UCB_QUOTAS = 0\n");
#endif
#ifdef	UCB_GRPMAST
	printf("UCB_GRPMAST = 1\n");
#else
	printf("UCB_GRPMAST = 0\n");
#endif
#ifdef	UCB_PGRP
	printf("UCB_PGRP = 1\n");
#else
	printf("UCB_PGRP = 0\n");
#endif
#ifdef	UCB_LOGIN
	printf("UCB_LOGIN = 1\n");
#else
	printf("UCB_LOGIN = 0\n");
#endif
#ifdef	UCB_LOAD
	printf("UCB_LOAD = 1\n");
#else
	printf("UCB_LOAD = 0\n");
#endif
#ifdef	UCB_METER
	printf("UCB_METER = 1\n");
#else
	printf("UCB_METER = 0\n");
#endif
#ifdef	MENLO_OVLY
	printf("MENLO_OVLY = 1\n");
#else
	printf("MENLO_OVLY = 0\n");
#endif
#ifdef	OLDTTY
	printf("OLDTTY = 1\n");
#else
	printf("OLDTTY = 0\n");
#endif
#ifdef	UCB_NTTY
	printf("UCB_NTTY = 1\n");
#else
	printf("UCB_NTTY = 0\n");
#endif
#ifdef	MENLO_JCL
	printf("MENLO_JCL = 1\n");
#else
	printf("MENLO_JCL = 0\n");
#endif
#ifdef	VIRUS_VFORK
	printf("VIRUS_VFORK = 1\n");
#else
	printf("VIRUS_VFORK = 0\n");
#endif
#ifdef	UCB_AUTOBOOT
	printf("UCB_AUTOBOOT = 1\n");
#else
	printf("UCB_AUTOBOOT = 0\n");
#endif
#if	UCB_NKB==1
	printf("UCB_NKB = 1\n");
#endif
#if	UCB_NKB==2
	printf("UCB_NKB = 2\n");
#endif
#ifndef	UCB_NKB
	printf("UCB_NKB = 0\n");
#endif
#ifdef	UCB_CLIST
	printf("UCB_CLIST = 1\n");
#else
	printf("UCB_CLIST = 0\n");
#endif
#ifdef	UCB_FRCSWAP
	printf("UCB_FRCSWAP = 1\n");
#else
	printf("UCB_FRCSWAP = 0\n");
#endif
#ifdef	UCB_FSFIX
	printf("UCB_FSFIX = 1\n");
#else
	printf("UCB_FSFIX = 0\n");
#endif
#ifdef	CGL_RTP
	printf("CGL_RTP = 1\n");
#else
	printf("CGL_RTP = 0\n");
#endif
#ifdef	NOKA5
	printf("NOKA5 = 1\n");
#else
	printf("NOKA5 = 0\n");
#endif
#ifdef	UCB_UPRINTF
	printf("UCB_UPRINTF = 1\n");
#else
	printf("UCB_UPRINTF = 0\n");
#endif
#ifdef	UCB_DEVERR
	printf("UCB_DEVERR = 1\n");
#else
	printf("UCB_DEVERR = 0\n");
#endif
#ifdef	UCB_VHANGUP
	printf("UCB_VHANGUP = 1\n");
#else
	printf("UCB_VHANGUP = 0\n");
#endif
#ifdef	UNFAST
	printf("UNFAST = 1\n");
#else
	printf("UNFAST = 0\n");
#endif
#ifdef	ACCT
	printf("ACCT = 1\n");
#else
	printf("ACCT = 0\n");
#endif
#ifdef	INSECURE
	printf("INSECURE = 1\n");
#else
	printf("INSECURE = 0\n");
#endif
#ifdef	MPX_FILS
	printf("MPX_FILS = 1\n");
#else
	printf("MPX_FILS = 0\n");
#endif
#ifdef	DIAGNOSTIC
	printf("DIAGNOSTIC = 1\n");
#else
	printf("DIAGNOSTIC = 0\n");
#endif
#ifdef	DISPLAY
	printf("DISPLAY = 1\n");
#else
	printf("DISPLAY = 0\n");
#endif

	printf("\n/ Tunable parameters (other than those in param.c)\n\n");
	printf("MAXMEM = %d.\n", MAXMEM);
	printf("MAXUPRC = %d.\n", MAXUPRC);
	printf("SSIZE = %d.\n", SSIZE);
	printf("SINCR = %d.\n", SINCR);
	printf("NOFILE = %d.\n", NOFILE);
	printf("CANBSIZ = %d.\n", CANBSIZ);
	printf("MSGBUFS = %d.\n", MSGBUFS);
	printf("NCARGS = %d.\n", NCARGS);

	exit(0);
}