.TH HP 4 .SH NAME hp \- RH-11/RP04, RP05, RP06, RM03 moving-head disk .SH DESCRIPTION Files with minor device numbers 0 through 7 refer to various portions of drive 0; minor devices 8 through 15 refer to drive 1, etc. .PP The origin and size of the pseudo-disks on each drive are as follows: .PP RP partitions .br disk start length .br 0 0 9614 .br 1 9614 8778 .br 2 0 0 .br 3 0 0 .br 4 0 0 .br 5 0 0 .br 6 10450 330220 .br 7 18392 322278 .PP RM partitions .br disk start length .br 0 0 9600 .br 1 9600 8800 .br 2 0 0 .br 3 0 0 .br 4 0 0 .br 5 0 0 .br 6 9600 122080 .br 7 18400 113280 .PP It is unwise for all of these files to be present in one installation, since there is overlap in addresses and protection becomes a sticky matter. Ordinarily devices 0 and 6 (or 0 and 7) will be used. .PP The block files access the disk via the system's normal buffering mechanism and may be read and written without regard to physical disk records. There is also a `raw' interface which provides for direct transmission between the disk and the user's read or write buffer. A single read or write call results in exactly one I/O operation and therefore raw I/O is considerably more efficient when many words are transmitted. The names of the raw files conventionally begin with an extra `r.' .PP In raw I/O the buffer must begin on a word boundary, and counts should be a multiple of 512 bytes (a disk block). Likewise .I seek calls should specify a multiple of 512 bytes. .SH FILES /dev/rp?, /dev/rrp? .SH SEE ALSO rp(4)