32V/usr/src/sys/dev/dhdm.c

/*
 *	DM-BB driver
 */
#include "../h/param.h"
#include "../h/tty.h"
#include "../h/conf.h"
#include "../h/uba.h"

#define	DMADDR	((struct device *)(UBA0_DEV+0170500))

struct	tty dh11[];
int	ndh11;		/* Set by dh.c to number of lines */

#define	DONE	0200
#define	SCENABL	040
#define	CLSCAN	01000
#define	TURNON	03	/* CD lead, line enable */
#define	RQS	04	/* request to send */
#define	TURNOFF	1	/* line enable only */
#define	CARRIER	0100

struct device
{
	short	dmcsr;
	short	dmlstat;
	short	junk[2];
};

/*
 * Turn on the line associated with the (DH) device dev.
 */
dmopen(dev)
{
	register struct tty *tp;
	register struct device *addr;
	register d;

	d = minor(dev);
	tp = &dh11[d];
	addr = DMADDR;
	addr += d>>4;
	spl5();
	addr->dmcsr = d&017;
	addr->dmlstat = TURNON;
	if (addr->dmlstat&CARRIER)
		tp->t_state |= CARR_ON;
	addr->dmcsr = IENABLE|SCENABL;
	while ((tp->t_state&CARR_ON)==0)
		sleep((caddr_t)&tp->t_rawq, TTIPRI);
	spl0();
}

/*
 * Dump control bits into the DM registers.
 */
dmctl(dev, bits)
{
	register struct device *addr;
	register d, s;

	d = minor(dev);
	addr = DMADDR;
	addr += d>>4;
	s = spl5();
	addr->dmcsr = d&017;
	addr->dmlstat = bits;
	addr->dmcsr = IENABLE|SCENABL;
	splx(s);
}

/*
 * DM11 interrupt.
 * Mainly, deal with carrier transitions.
 */
dmint(dev)
{
	register struct tty *tp;
	register struct device *addr;
	register d;

	d = minor(dev);
	addr = DMADDR;
	addr += d;
	if (addr->dmcsr&DONE) {
		tp = &dh11[(d<<4)+(addr->dmcsr&017)];
		if (tp < &dh11[ndh11]) {
			wakeup((caddr_t)&tp->t_rawq);
			if ((addr->dmlstat&CARRIER)==0) {
				if ((tp->t_state&WOPEN)==0) {
					signal(tp->t_pgrp, SIGHUP);
					addr->dmlstat = 0;
					flushtty(tp);
				}
				tp->t_state &= ~CARR_ON;
			} else
				tp->t_state |= CARR_ON;
		}
		addr->dmcsr = IENABLE|SCENABL;
	}
}