4.1cBSD/a/sys/vax/trap.c
/* trap.c 4.27 83/01/22 */
#include "../machine/psl.h"
#include "../machine/reg.h"
#include "../machine/pte.h"
#include "../h/param.h"
#include "../h/systm.h"
#include "../h/dir.h"
#include "../h/user.h"
#include "assym.s"
#include "../h/proc.h"
#include "../h/seg.h"
#include "../vax/trap.h"
#include "../h/acct.h"
#include "../h/kernel.h"
#ifdef SYSCALLTRACE
#include "../sys/syscalls.c"
#endif
#include "../vax/mtpr.h"
#define USER 040 /* user-mode flag added to type */
struct sysent sysent[];
int nsysent;
char *trap_type[] = {
"Reserved addressing mode",
"Privileged instruction",
"Reserved operand",
"Breakpoint",
"Xfc trap",
"Syscall trap",
"Arithmetic fault",
"Ast trap",
"Segmentation fault",
"Protection fault",
"Trace trap",
"Compatibility mode trap",
#ifdef notdef
"Page fault",
"Page table fault",
#endif
};
#define TRAP_TYPES (sizeof trap_type / sizeof trap_type[0])
/*
* Called from the trap handler when a processor trap occurs.
*/
/*ARGSUSED*/
trap(sp, type, code, pc, psl)
int sp, type;
unsigned code;
int pc, psl;
{
register int *locr0 = ((int *)&psl)-PS;
register int i;
register struct proc *p;
struct timeval syst;
syst = u.u_ru.ru_stime;
if (USERMODE(locr0[PS])) {
type |= USER;
u.u_ar0 = locr0;
}
switch (type) {
default:
printf("trap type %d, code = %x, pc = %x\n", type, code, pc);
type &= ~USER;
if ((unsigned)type < TRAP_TYPES)
panic(trap_type[type]);
panic("trap");
case T_PROTFLT+USER: /* protection fault */
i = SIGBUS;
break;
case T_PRIVINFLT+USER: /* privileged instruction fault */
case T_RESADFLT+USER: /* reserved addressing fault */
case T_RESOPFLT+USER: /* resereved operand fault */
u.u_code = type &~ USER;
i = SIGILL;
break;
case T_ASTFLT+USER:
astoff();
if ((u.u_procp->p_flag & SOWEUPC) && u.u_prof.pr_scale) {
addupc(pc, &u.u_prof, 1);
u.u_procp->p_flag &= ~SOWEUPC;
}
goto out;
case T_ARITHTRAP+USER:
u.u_code = code;
i = SIGFPE;
break;
/*
* If the user SP is above the stack segment,
* grow the stack automatically.
*/
case T_SEGFLT+USER:
if (grow((unsigned)locr0[SP]) || grow(code))
goto out;
i = SIGSEGV;
break;
case T_TABLEFLT: /* allow page table faults in kernel mode */
case T_TABLEFLT+USER: /* page table fault */
panic("ptable fault");
case T_PAGEFLT: /* allow page faults in kernel mode */
case T_PAGEFLT+USER: /* page fault */
i = u.u_error;
pagein(code, 0);
u.u_error = i;
if (type == T_PAGEFLT)
return;
goto out;
case T_BPTFLT+USER: /* bpt instruction fault */
case T_TRCTRAP+USER: /* trace trap */
locr0[PS] &= ~PSL_T;
i = SIGTRAP;
break;
case T_XFCFLT+USER: /* xfc instruction fault */
i = SIGEMT;
break;
case T_COMPATFLT+USER: /* compatibility mode fault */
u.u_acflag |= ACOMPAT;
u.u_code = code;
i = SIGILL;
break;
}
psignal(u.u_procp, i);
out:
p = u.u_procp;
if (p->p_cursig || ISSIG(p))
psig();
p->p_pri = p->p_usrpri;
if (runrun) {
/*
* Since we are u.u_procp, clock will normally just change
* our priority without moving us from one queue to another
* (since the running process is not on a queue.)
* If that happened after we setrq ourselves but before we
* swtch()'ed, we might not be on the queue indicated by
* our priority.
*/
(void) spl6();
setrq(p);
u.u_ru.ru_nivcsw++;
swtch();
}
if (u.u_prof.pr_scale) {
int ticks;
struct timeval *tv = &u.u_ru.ru_stime;
ticks = ((tv->tv_sec - syst.tv_sec) * 1000 +
(tv->tv_usec - syst.tv_usec) / 1000) / (tick / 1000);
if (ticks)
addupc(locr0[PC], &u.u_prof, ticks);
}
curpri = p->p_pri;
}
#ifdef SYSCALLTRACE
int syscalltrace = 0;
#endif
/*
* Called from the trap handler when a system call occurs
*/
/*ARGSUSED*/
syscall(sp, type, code, pc, psl)
unsigned code;
{
register int *locr0 = ((int *)&psl)-PS;
register caddr_t params; /* known to be r10 below */
register int i; /* known to be r9 below */
register struct sysent *callp;
register struct proc *p;
int opc;
struct timeval syst;
syst = u.u_ru.ru_stime;
if (!USERMODE(locr0[PS]))
panic("syscall");
u.u_ar0 = locr0;
params = (caddr_t)locr0[AP] + NBPW;
u.u_error = 0;
opc = pc - 2;
if (code > 63)
opc -= 2;
callp = (code >= nsysent) ? &sysent[63] : &sysent[code];
if (callp == sysent) {
i = fuword(params);
params += NBPW;
callp = (code >= nsysent) ? &sysent[63] : &sysent[code];
}
if (i = callp->sy_narg * sizeof (int)) {
#ifndef lint
asm("prober $3,r9,(r10)"); /* GROT */
asm("bnequ ok"); /* GROT */
u.u_error = EFAULT; /* GROT */
goto bad; /* GROT */
asm("ok:"); /* GROT */
asm("movc3 r9,(r10),_u+U_ARG"); /* GROT */
#else
bcopy(params, (caddr_t)u.u_arg, (u_int)i);
#endif
}
u.u_ap = u.u_arg;
u.u_dirp = (caddr_t)u.u_arg[0];
u.u_r.r_val1 = 0;
u.u_r.r_val2 = locr0[R1];
if (setjmp(&u.u_qsave)) {
if (u.u_error == 0 && u.u_eosys == JUSTRETURN)
u.u_error = EINTR;
} else {
u.u_eosys = JUSTRETURN;
#ifdef SYSCALLTRACE
if (syscalltrace) {
register int i;
char *cp;
if (code >= nsysent)
printf("0x%x", code);
else
printf("%s", syscallnames[code]);
cp = "(";
for (i= 0; i < callp->sy_narg; i++) {
printf("%s%x", cp, u.u_arg[i]);
cp = ", ";
}
if (i)
putchar(')', 0);
putchar('\n', 0);
}
#endif
(*(callp->sy_call))();
}
locr0[PS] &= ~PSL_C;
if (u.u_eosys == RESTARTSYS)
pc = opc;
else if (u.u_eosys == SIMULATERTI)
dorti();
else if (u.u_error) {
#ifndef lint
bad:
#endif
locr0[R0] = u.u_error;
locr0[PS] |= PSL_C; /* carry bit */
} else {
locr0[R0] = u.u_r.r_val1;
locr0[R1] = u.u_r.r_val2;
}
p = u.u_procp;
if (p->p_cursig || ISSIG(p))
psig();
p->p_pri = p->p_usrpri;
if (runrun) {
/*
* Since we are u.u_procp, clock will normally just change
* our priority without moving us from one queue to another
* (since the running process is not on a queue.)
* If that happened after we setrq ourselves but before we
* swtch()'ed, we might not be on the queue indicated by
* our priority.
*/
(void) spl6();
setrq(p);
u.u_ru.ru_nivcsw++;
swtch();
}
if (u.u_prof.pr_scale) {
int ticks;
struct timeval *tv = &u.u_ru.ru_stime;
ticks = ((tv->tv_sec - syst.tv_sec) * 1000 +
(tv->tv_usec - syst.tv_usec) / 1000) / (tick / 1000);
if (ticks)
addupc(locr0[PC], &u.u_prof, ticks);
}
curpri = p->p_pri;
}
/*
* nonexistent system call-- signal process (may want to handle it)
* flag error if process won't see signal immediately
* Q: should we do that all the time ??
*/
nosys()
{
if (u.u_signal[SIGSYS] == SIG_IGN || u.u_signal[SIGSYS] == SIG_HOLD)
u.u_error = EINVAL;
psignal(u.u_procp, SIGSYS);
}