4.1cBSD/usr/src/etc/termcap/termcap.requests
From faletti@UCBKIM Sun Jan 23 03:13:52 1983
Date: 23-Jan-83 03:19:41-PST (Sun)
From: faletti@UCBKIM (Joe Faletti)
Subject: A termcap addition.
Message-Id: <8300231119.29664@UCBKIM.BERKELEY.ARPA>
Received: by UCBKIM.BERKELEY.ARPA (3.256 [12/5/82])
id AA29664; 23-Jan-83 03:19:41-PST (Sun)
Received: from UCBKIM.BERKELEY.ARPA by UCBCALDER.BERKELEY.ARPA (3.300 [1/17/83])
id AA00662; 23 Jan 83 03:13:52 PST (Sun)
To: termcap@UCBCALDER
Status: RO
I sent this to Mark Horton in December as per the warning in
/etc/termcap and still it gets lost! There are now many people
besides me using this terminal, although most use CF&O machines.
Another terminal entry in Kim's old termcap that many peole have
is the tvi925 at the end of the file. You should probably add
that too.
Joe
# From ucbvax!faletti (Faletti@Berkeley)
# FREEDOM 100 by Liberty Electronics USA, SF.
# :kh=^^: left out because it precludes using change-to-alternate-file in vi.
# Basic Freedom 100 entry, works with VI at 1200 baud.
Mf|f100|freedom100|freedom|freedom 100 no padding:\
:am:bs:bw:mi:ms:pt:co#80:kn#20:li#24:\
:ct=\E3:st=\E1:is=\Eg\Ef\r\Ed:\
:kr=^L:\
:bl=^G:cl=^Z:cr=^M:do=^J:ho=^^:kb=^H:kl=^H:\:kd=^V:\
:ko=dc,al,dl,cl,bt,ce,cd:ku=^K:le=^H:nd=^L:nl=^J:\
:ch=\E]%+ :cm=\E=%+ %+ :cv=\E[%+ :sr=\Ej:ta=^I:up=^K:\
:al=\EE:bt=\EI:cd=\EY:ce=\ET:dc=\EW:dl=\ER:ei=\Er:im=\Eq:\
:se=\EG0:so=\EG4:ue=\EG0:us=\EG8:as=\E$:ae=\E%:\
:vb=\Eb\200\200\Ed:\
:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:\
:k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:k0=^AI\r:\
:hs:ts=\Eg\Ef:fs=\r:ds=\Eg\Ef\r:
Mf|f100-rv|freedom100-rv|freedom-rv|freedom100 with reverse video at 1200:\
:is=\Eg\Ef\r\Eb:vb=\Ed\200\200\Eb:\
:tc=freedom100:
# VI at 9600 baud (or EMACS at 1200 -- but may be more than is needed for emacs)
Mf|f100-v|freedom100-v|freedom-v|freedom100 for 9600 vi or 1200 emacs:\
:al=6.5*\EE:dl=11.5*\ER:\
:vb=\Eb\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\Ed:\
:tc=freedom100:
Mf|f100-v-rv|freedom100-v-rv|freedom-v-rv|freedom100 rev. vid. for 9600 vi:\
:al=6.5*\EE:dl=11.5*\ER:\
:is=\Eg\Ef\r\Eb:\
:vb=\Ed\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\Eb:\
:tc=freedom100:
# EMACS at 9600 baud -- this still needs some more work on the padding
Mf|f100-e|freedom100-e|freedom-e|freedom100 for 9600 emacs:\
:al=8.5*\EE:dl=11.5*\ER:ip=6:\
:vb=\Eb\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\Ed:\
:tc=freedom100:
Mf|f100-e-rv|freedom100-e-rv|freedom-e-rv|freedom100 rev. vid. for emacs 9600:\
:al=8.5*\EE:dl=11.5*\ER:ip=6:\
:is=\Eg\Ef\r\Eb:\
:vb=\Ed\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\Eb:\
:tc=freedom100:
From arens@UCBKIM Sun Jan 23 15:51:14 1983
Date: 23-Jan-83 15:56:53-PST (Sun)
From: arens@UCBKIM (Yigal Arens)
Subject: termcap entries
Message-Id: <8300232356.10756@UCBKIM.BERKELEY.ARPA>
Received: by UCBKIM.BERKELEY.ARPA (3.256 [12/5/82])
id AA10756; 23-Jan-83 15:56:53-PST (Sun)
Received: from UCBKIM.BERKELEY.ARPA by UCBCALDER.BERKELEY.ARPA (3.300 [1/17/83])
id AA01003; 23 Jan 83 15:51:14 PST (Sun)
To: termcap@ucbcalder
Status: RO
For emacs users it is important to have the h19e entry, adding some padding
on insert character so that emacs will work at 9600 baud.
The entry is:
ke|h19-e|h19e|h19 for emacs:ip=1.5:tc=h19-us:
Yigal Arens (arens@ucbkim)
From dlw Mon Jan 24 00:19:00 1983
Date: 24 Jan 83 00:19:00 PST (Mon)
From: dlw (David Wasley)
Subject: tvi925
Message-Id: <8300240819.5662@UCBCALDER.BERKELEY.ARPA>
Received: by UCBCALDER.BERKELEY.ARPA (3.300 [1/17/83])
id AA05662; 24 Jan 83 00:19:00 PST (Mon)
To: termcap
Status: RO
Please add the following. The if= string needs to be munged to conform
to Mark's new format. The following is what I use on the CC machines.
v9|tvi925|925|televideo model 925:\
:xn:am:bs:co#80:li#24:cm=\E=%+ %+ :cl=^Z:cd=\EY:ce=\ET:is=\El\E":\
:al=\EE:dl=\ER:im=:ei=:ic=\EQ:dc=\EW:if=tabset.stdcrt:\
:ho=^^:nd=^L:bt=\EI:pt:so=\EG4:se=\EG0:sg#1:us=\EG8:ue=\EG0:ug#1:\
:up=^K:do=^V:kb=^H:ku=^K:kd=^V:kl=^H:kr=^L:kh=^^:ma=^V^J^L :\
:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:k7=^AF\r:\
:k8=^AG\r:k9=^AH\r:k0=^AI\r:ko=ic,dc,al,dl,cl,ce,cd,bt:
David Wasley
From fair@UCBARPA Mon Jan 24 10:18:58 1983
Date: 24 Jan 83 10:24:45 PST (Mon)
From: fair@UCBARPA (Erik E. Fair)
Subject: 4 Termcaps, new and fixed
Message-Id: <8300241824.11381@UCBARPA.BERKELEY.ARPA>
Received: by UCBARPA.BERKELEY.ARPA (3.300 [1/17/83])
id AA11381; 24 Jan 83 10:24:45 PST (Mon)
Received: from UCBARPA.BERKELEY.ARPA by UCBCALDER.BERKELEY.ARPA (3.300 [1/17/83])
id AA06892; 24 Jan 83 10:18:58 PST (Mon)
To: termcap@calder
Status: RO
# Best of all vp worlds - underline/rev-video - Erik Fair
av|vp|viewpoint|ADDS viewpoint:am:bw:bs:co#80:li#24:kn#3:\
:cm=\EY%+ %+ :ll=^A:do=^J:nd=^F:up=^Z:cl=^L:cd=\Ek:ce=\EK:\
:is=^O\E0`:vs=^O\E0P:ve=^O\E0`:so=^N:se=^O:us=^N:ue=^O:\
:k1=^B1:k2=^B2:k3=^B3:
#
# Intertec InterTube termcap entry - Erik Fair, September 21, 1981
# Beware the manual - it lies. It says up=^K. It's ^Z
it|InterTube|IT|Intertec:bs:am:cl=^L:ho=^A:up=^Z:nd=^F:\
:cm=50\EY%+\040%+\040:so=\E0P:se=\E0@:co#80:li#25
#
# Hazeltine 1500 with bug fix - Don't change the \176 to ~!!
# That causes funny printing if you printenv with TERMCAP set on the 1500
# The old termcap did not address the cursor correctly, and screwed up in
# vi quite a bit.
H5|h1500:co#80:li#24:am:bs:hz:bw:\
:cd=10\176^X:ce=\176^O:cl=\176^\:cm=\176^Q%r%.%.:\
:al=40\176^Z:dl=40\176^S:ho=\176^R:do=\176^K:nd=^P:up=\176^L:\
:so=\176^_:se=\176^Y
#
# vt125 - got this from Chris Guthrie - seems to work, but you never know...
d6|vt125|vt125-am|vt125:\
:cr=^M:do=^J:nl=^J:bl=^G:co#80:li#24:cl=50\E[;H\E[2J:le=^H:am:bs:\
:cm=5\E[%i%d;%dH:nd=2\E[C:up=2\E[A:ce=3\E[K:cd=50\E[J:so=2\E[7m:\
:se=2\E[m:us=2\E[4m:ue=2\E[m:md=2\E[1m:mr=2\E[7m:mb=2\E[5m:me=2\E[m:\
:is=\E[1;24r\E[24;1H:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:ks=\E[?1h\E=:\
:ke=\E[?1l\E>:rf=/usr/lib/tabset/vt100:ku=\EOA:kd=\EOB:kr=\EOC:kl=\EOD:\
:kb=^H:ho=\E[H:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:ta=^I:pt:sr=5\EM:vt#3:\
:sc=\E7:rc=\E8:cs=\E[%i%d;%dr:
From chin@Kim Tue Jan 25 22:26:56 1983
Date: 25 Jan 83 22:31:02 PST (Tue)
From: chin@Kim
Subject: termcap correction
Message-Id: <8300260630.6178@UCBVAX.BERKELEY.ARPA>
Received: by UCBVAX.BERKELEY.ARPA (3.300 [1/17/83])
id AA06178; 25 Jan 83 22:30:27 PST (Tue)
Received: from UCBVAX.BERKELEY.ARPA by UCBCALDER.BERKELEY.ARPA (3.300 [1/17/83])
id AA01471; 25 Jan 83 22:26:56 PST (Tue)
To: termcap@UCBCALDER
Status: RO
Please change the cm capability of Mw|it2|intertube2 from :cm=^K.^B%\102%.:
to :cm=^N%+ %+ :. Thanks.
David Chin
chin@UCBKIM
From mha@Kim Wed Jan 26 11:47:46 1983
Date: 26 Jan 83 11:52:32 PST (Wed)
From: mha@Kim
Message-Id: <8300261951.21244@UCBVAX.BERKELEY.ARPA>
Received: by UCBVAX.BERKELEY.ARPA (3.300 [1/17/83])
id AA21244; 26 Jan 83 11:51:29 PST (Wed)
Received: from UCBVAX.BERKELEY.ARPA by UCBCALDER.BERKELEY.ARPA (3.300 [1/17/83])
id AA04116; 26 Jan 83 11:47:46 PST (Wed)
To: termcap@UCBCALDER
Status: RO
# CIT 80 - vt 100 emulator, the termcap has been modified to remove
# the delay times and do an auto tab set rather than the indirect
# file used in vt100.
ct|cit80|cit 80|Citoh 80:\
:co#80:li#24:am:cl=\E[;H\EJ:bs:cm=\E[%i%2;%2H:nd=\E[C:up=\E[A:\
:ce=\EK:cd=\EJ:\
:is=\E>:\
:ks=\E[?1h\E=:ke=\E[?1l\E>:\
:ku=\EOA:kd=\EOB:kr=\EOC:kl=\EOD:\
# end of cit80
# AlternateCIT 101 - vt 100 emulator, the termcap has been modified to remove
# the delay times and do an auto tab set rather than the indirect
# file used in vt100.
# Uses 23 lines so can run citsys (like h19sys).
ct|citc|cit 101|Citoh fast vt100:\
:co#80:li#23:am:cl=\E[;H\E[2J:bs:cm=\E[%i%2;%2H:nd=\E[C:up=\E[A:\
:ce=\E[K:cd=\E[J:so=\E[7m:se=\E[m:us=\E[4m:ue=\E[m:\
:is=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g:\
:ks=\E[?1h\E=:ke=\E[?1l\E>:\
:ku=\EOA:kd=\EOB:kr=\EOC:kl=\EOD:\
:vb=\E[?5h\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\E[?5l:\
:dc=\E[P:\
:al=\E[L:\
:im=:\
:ei=:\
:dl=\E[M:\
:ic=\E[@:
# end of citc
# AlternateCIT 101 - vt 100 emulator, the termcap has been modified to remove
# the delay times and do an auto tab set rather than the indirect
# file used in vt100.
# Uses 23 lines so can run citsys (like h19sys).
ct|cita|cit 101|Citoh fast vt100:\
:co#80:li#23:am:cl=\E[;H\E[2J:bs:cm=\E[%i%2;%2H:nd=\E[C:up=\E[A:\
:ce=\E[K:cd=\E[J:so=\E[7m:se=\E[m:us=\E[4m:ue=\E[m:\
:is=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g:\
:ks=\E[?1h\E=:ke=\E[?1l\E>:\
:ku=\EOA:kd=\EOB:kr=\EOC:kl=\EOD:\
:vb=\E[?5h\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\E[?5l:
# end of cita
# CIT 101 - vt 100 emulator, the termcap has been modified to remove
# the delay times and do an auto tab set rather than the indirect
# file used in vt100.
ct|cit101|cit 101|Citoh fast vt100:\
:co#80:li#24:am:cl=\E[;H\E[2J:bs:cm=\E[%i%2;%2H:nd=\E[C:up=\E[A:\
:ce=\E[K:cd=\E[J:so=\E[7m:se=\E[m:us=\E[4m:ue=\E[m:\
:is=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g:\
:ks=\E[?1h\E=:ke=\E[?1l\E>:\
:ku=\EOA:kd=\EOB:kr=\EOC:kl=\EOD:\
# end of cit101
# CIT 101 - vt 100 emulator, the termcap has been modified to remove
# the delay times and do an auto tab set rather than the indirect
# file used in vt100. (modified to remove bell?not working)...rex
citb|cit101b|cit 101b|Citoh fast vt100:\
:co#80:li#24:am:cl=\E[;H\E[2J:bs:cm=\E[%i%2;%2H:nd=\E[C:up=\E[A:\
:ce=\E[K:cd=\E[J:so=\E[7m:se=\E[m:us=\E[4m:ue=\E[m:\
:is=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g:\
:ks=\E[?1h\E=:ke=\E[?1l\E>:\
:ku=\EOA:kd=\EOB:kr=\EOC:kl=\EOD:\
:vb=\E[?5h\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\E[?5l:
# end of cit101
# termcap entry by Tim Curry 5/21/82 Univ. of Central Fla. duke!ucf-cs!tim
# Terminal Configuration Assumptions:
# 1) Edit keys transmit (DUPE on S2 bit 1 down)
# 2) Actually a 925 (i.e. not in 912/920 emulation)
# 3) Visual Bell assumes a default of white on black
# 4) Page attributes for special display
# 5) This uses a solid underscore cursor when not in vi. Solid Block
# cursor in vi.
# 6) No function key definitions are given
# 7) Only one page of memory is available
v4|925a|tvi925a|TeleVideo Model 925:\
:al=\EE:am:bs:bt=\EI:bw:cd=\EY:ce=\ET:cl=^Z:cm=\E=%+ %+ :co#80:dc=\EW:\
:dl=\ER:do=^V:ei=:ic=\EQ:if=/usr/lib/tabset/stdcrt:im=:kb=^H:kd=^V:\
:kh=^^:kl=^H:kn#12:kr=^L:ku=^K:li#24:nd=^L:pt:se=\EG0:sg=#1:so=\EG4:\
:ue=\EG0:ug#1:ul:up=^K:us=\EG8:is=\El\
:vb=\Eb\200\200\200\200\200\200\200\200\200\200\200\200\200\200\Ed:\
:ve=\E.4:vs=\E.2:
# end of 925a
# televideo 925
#
v3|tvi925|925|televideo 925:if=/usr/lib/tabset/stdcrt:\
:al=\EE:bs:ce=\Et:cm=\E=%+ %+ :cl=\E*:co#80:dc=\EW:dl=\ER:ei=:\
:ku=^K:kd=^J:\
:im=:ic=\EQ:li#24:nd=^L:pt:se=\EG0:so=\EG4:up=^K:us=\EG8:ue=\EG0:\
:sg#1:ug#1:
# end 925
From lepreau@Utah-CS Tue Feb 1 22:03:12 1983
Date: 1 Feb 1983 23:02:18-MST
From: Jay Lepreau <lepreau@Utah-CS>
Subject: New entries for teleray t10 and esprit
Message-Id: <8301020607.2127@UCBARPA.BERKELEY.ARPA>
Received: from UTAH-CS by UCBARPA.BERKELEY.ARPA (3.300 [1/17/83])
id AA02127; 1 Feb 83 22:07:48 PST (Tue)
Received: from UCBARPA.BERKELEY.ARPA by UCBCALDER.BERKELEY.ARPA (3.300 [1/17/83])
id AA29389; 1 Feb 83 22:03:12 PST (Tue)
To: ucbcalder.termcap@ucb-arpa
Status: RO
Let me know if you have any problems with these. The t10 one is very
well tested, as that is what most of our terminals are, and hasn't changed in
1/2 a year or more. The esprit is newer and conceivably could be buggy as
its only users are unsophisticated, and might not notice. No known
problems, however.
Note the t10 is set up w/o "am"-- we are probably the biggest users of t10's
in the Unix community and have put line-folding into the tty driver,
so if you could keep "am" out of the official version we'd appreciate it--
will make using guest accounts a whole lot easier!
(am is a dip-switch option.) Could add a t10-am I guess.
It includes Mark Horton's new "km" designation for meta-key capabilty.
Please let me know if you can't include these as is.
-Jay
# "Teleray Arpa Special", offically designated as
# "Teleray Arpa network model 10" with "Special feature 720".
# This is the new (1981) fast microcode updating the older "arpa" proms
# (which gave meta-key and pgmmable-fxn keys). 720 is much much faster,
# converts the keypad to programmable function keys, and has other goodies.
# Standout mode is still broken (magic cookie, etc) so is suppressed as no
# programs handle such lossage properly.
# Note: this is NOT the old termcap's "t1061f with fast proms."
# From Univ of Utah, J.Lepreau Tue Feb 1 06:39:37 1983
# lepreau@utah-cs, harpo!utah-cs!lepreau
#
y7|t10|teleray 10 special:\
:so@:se@:us@:ue@:\
:al=\EL:bs:cd=\EJ:ce=\EK:cl=30\Ej:cm=\EY%+ %+ :co#80:\
:dc=\EQ:dl=\EM:ei=:ho=\EH:ic=\EP:im=:km:li#24:nd=\EC:nl=\n:pc=\200:pt:\
:se=\ER@:so=\ERD:sf=\Eq:sg#2:sr=\Ep:up=\EA:ug#1:ue=\ER@:us=\ERH:\
:xs:xt:
# Hazeltine esprit entries from Univ of Utah Tue Feb 1 06:39:37 1983
# J.Lepreau, lepreau@utah-cs, harpo!utah-cs!lepreau
HE|esprit|hazeltine esprit:\
:al=40\E^Z:bs:cd=5\E^X:ce=\E^O:cl=\E^\:cm=\E^Q%r%>^^ %+`%+`:co#80:\
:dl=40\E^S:do=\E^K:ho=\E^R:li#24:nd=^P:se=\E^Y:so=\E^_:up=\E^L:
HF|esprit-am|hazeltine esprit auto-margin:\
:am:tc=esprit:
From tut@Topaz.CC Wed Feb 2 17:33:58 1983
Date: 2 Feb 83 17:20:47 PST (Wed)
From: tut@Topaz.CC
Subject: tvi925 entry
Message-Id: <8301030135.7268@UCBVAX.BERKELEY.ARPA>
Received: by UCBVAX.BERKELEY.ARPA (3.300 [1/17/83])
id AA07268; 2 Feb 83 17:35:57 PST (Wed)
Received: from UCBVAX.BERKELEY.ARPA by UCBCALDER.BERKELEY.ARPA (3.300 [1/17/83])
id AA00270; 2 Feb 83 17:33:58 PST (Wed)
To: termcap@UCBCALDER
Status: RO
Last time I looked it was missing from termcap on ARPAVAX.
If you *do* have one now make sure it has the :ma: string--
there are lots of PDPs left in the world.
v9|tvi925|925|televideo model 925:\
:am:bs:xn:co#80:li#24:cm=\E=%+ %+ :cl=\E*:cd=\Ey:ce=\Et:is=\El:\
:al=\EE:dl=\ER:im=:ei=:ic=\EQ:dc=\EW:if=/usr/lib/tabset/stdcrt:\
:ho=^^:nd=^L:bt=\EI:pt:so=\EG4:se=\EG0:sg#1:us=\EG8:ue=\EG0:ug#1:\
:up=^K:do=^V:kb=^H:ku=^K:kd=^V:kl=^H:kr=^L:kh=^^:ma=^Vj^Kk^Ll^^H^R^L:\
:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:k7=^AF\r:\
:k8=^AG\r:k9=^AH\r:k0=^AI\r:ko=ic,dc,al,dl,cl,ce,cd,bt:sr=\Ej:
vb|tvi925vb|925vb|televideo 925 w/ visual bell:\
:vb=\Eb\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\Ed:\
:tc=tvi925:
Bill Tuthill
From mckusick@UCBARPA Thu Feb 3 11:35:30 1983
Date: 3 Feb 83 11:39:57 PST (Thu)
From: mckusick@UCBARPA (Kirk Mckusick)
Subject: minor change request
Message-Id: <8301031939.13060@UCBARPA.BERKELEY.ARPA>
Received: by UCBARPA.BERKELEY.ARPA (3.300 [1/17/83])
id AA13060; 3 Feb 83 11:39:57 PST (Thu)
Received: from UCBARPA.BERKELEY.ARPA by UCBCALDER.BERKELEY.ARPA (3.300 [1/17/83])
id AA04822; 3 Feb 83 11:35:30 PST (Thu)
To: termcap@calder
Status: RO
Dear Mr Termcap,
I prefer to have the status line on my concept run in
full brightness mode rather than half bright, which I find
difficult to read. Consequently I would appreciate it if you
would change the "ts" and "fs" entries of the concept entry
as indicated below. (this is line 34 of the /etc/termcap entry
on arpavax)
old:
:es:hs:ts=\E z"\E?\E^C\EE\Ea %+ :fs=\Ee\E z :ds=\E ;\177:\
new:
:es:hs:ts=\E z"\E?\E^C\Ea %+ :fs=\E z :ds=\E ;\177:\
Thanks,
-Kirk