/* uba.c 6.1 83/08/21 */ #include "../machine/pte.h" #include "../h/param.h" #include "../h/systm.h" #include "../h/map.h" #include "../h/buf.h" #include "../h/vm.h" #include "../h/dir.h" #include "../h/user.h" #include "../h/proc.h" #include "../h/conf.h" #include "../h/dk.h" #include "../h/kernel.h" #include "../vax/cpu.h" #include "../vax/mtpr.h" #include "../vax/nexus.h" #include "../vaxuba/ubareg.h" #include "../vaxuba/ubavar.h" #if VAX780 char ubasr_bits[] = UBASR_BITS; #endif /* * Do transfer on device argument. The controller * and uba involved are implied by the device. * We queue for resource wait in the uba code if necessary. * We return 1 if the transfer was started, 0 if it was not. * If you call this routine with the head of the queue for a * UBA, it will automatically remove the device from the UBA * queue before it returns. If some other device is given * as argument, it will be added to the request queue if the * request cannot be started immediately. This means that * passing a device which is on the queue but not at the head * of the request queue is likely to be a disaster. */ ubago(ui) register struct uba_device *ui; { register struct uba_ctlr *um = ui->ui_mi; register struct uba_hd *uh; register int s, unit; uh = &uba_hd[um->um_ubanum]; s = spl6(); if (um->um_driver->ud_xclu && uh->uh_users > 0 || uh->uh_xclu) goto rwait; um->um_ubinfo = ubasetup(um->um_ubanum, um->um_tab.b_actf->b_actf, UBA_NEEDBDP|UBA_CANTWAIT); if (um->um_ubinfo == 0) goto rwait; uh->uh_users++; if (um->um_driver->ud_xclu) uh->uh_xclu = 1; splx(s); if (ui->ui_dk >= 0) { unit = ui->ui_dk; dk_busy |= 1<<unit; dk_xfer[unit]++; dk_wds[unit] += um->um_tab.b_actf->b_actf->b_bcount>>6; } if (uh->uh_actf == ui) uh->uh_actf = ui->ui_forw; (*um->um_driver->ud_dgo)(um); return (1); rwait: if (uh->uh_actf != ui) { ui->ui_forw = NULL; if (uh->uh_actf == NULL) uh->uh_actf = ui; else uh->uh_actl->ui_forw = ui; uh->uh_actl = ui; } splx(s); return (0); } ubadone(um) register struct uba_ctlr *um; { register struct uba_hd *uh = &uba_hd[um->um_ubanum]; if (um->um_driver->ud_xclu) uh->uh_xclu = 0; uh->uh_users--; ubarelse(um->um_ubanum, &um->um_ubinfo); } /* * Allocate and setup UBA map registers, and bdp's * Flags says whether bdp is needed, whether the caller can't * wait (e.g. if the caller is at interrupt level). * * Return value: * Bits 0-8 Byte offset * Bits 9-17 Start map reg. no. * Bits 18-27 No. mapping reg's * Bits 28-31 BDP no. */ ubasetup(uban, bp, flags) struct buf *bp; { register struct uba_hd *uh = &uba_hd[uban]; register int temp; int npf, reg, bdp; unsigned v; register struct pte *pte, *io; struct proc *rp; int a, o, ubinfo; #if VAX730 if (cpu == VAX_730) flags &= ~UBA_NEEDBDP; #endif v = btop(bp->b_un.b_addr); o = (int)bp->b_un.b_addr & PGOFSET; npf = btoc(bp->b_bcount + o) + 1; a = spl6(); while ((reg = rmalloc(uh->uh_map, (long)npf)) == 0) { if (flags & UBA_CANTWAIT) { splx(a); return (0); } uh->uh_mrwant++; sleep((caddr_t)&uh->uh_mrwant, PSWP); } bdp = 0; if (flags & UBA_NEEDBDP) { while ((bdp = ffs(uh->uh_bdpfree)) == 0) { if (flags & UBA_CANTWAIT) { rmfree(uh->uh_map, (long)npf, (long)reg); splx(a); return (0); } uh->uh_bdpwant++; sleep((caddr_t)&uh->uh_bdpwant, PSWP); } uh->uh_bdpfree &= ~(1 << (bdp-1)); } else if (flags & UBA_HAVEBDP) bdp = (flags >> 28) & 0xf; splx(a); reg--; ubinfo = (bdp << 28) | (npf << 18) | (reg << 9) | o; temp = (bdp << 21) | UBAMR_MRV; if (bdp && (o & 01)) temp |= UBAMR_BO; rp = bp->b_flags&B_DIRTY ? &proc[2] : bp->b_proc; if ((bp->b_flags & B_PHYS) == 0) pte = &Sysmap[btop(((int)bp->b_un.b_addr)&0x7fffffff)]; else if (bp->b_flags & B_UAREA) pte = &rp->p_addr[v]; else if (bp->b_flags & B_PAGET) pte = &Usrptmap[btokmx((struct pte *)bp->b_un.b_addr)]; else pte = vtopte(rp, v); io = &uh->uh_uba->uba_map[reg]; while (--npf != 0) { if (pte->pg_pfnum == 0) panic("uba zero uentry"); *(int *)io++ = pte++->pg_pfnum | temp; } *(int *)io++ = 0; return (ubinfo); } /* * Non buffer setup interface... set up a buffer and call ubasetup. */ uballoc(uban, addr, bcnt, flags) int uban; caddr_t addr; int bcnt, flags; { struct buf ubabuf; ubabuf.b_un.b_addr = addr; ubabuf.b_flags = B_BUSY; ubabuf.b_bcount = bcnt; /* that's all the fields ubasetup() needs */ return (ubasetup(uban, &ubabuf, flags)); } /* * Release resources on uba uban, and then unblock resource waiters. * The map register parameter is by value since we need to block * against uba resets on 11/780's. */ ubarelse(uban, amr) int *amr; { register struct uba_hd *uh = &uba_hd[uban]; register int bdp, reg, npf, s; int mr; /* * Carefully see if we should release the space, since * it may be released asynchronously at uba reset time. */ s = spl6(); mr = *amr; if (mr == 0) { /* * A ubareset() occurred before we got around * to releasing the space... no need to bother. */ splx(s); return; } *amr = 0; splx(s); /* let interrupts in, we're safe for a while */ bdp = (mr >> 28) & 0x0f; if (bdp) { switch (cpu) { #if VAX780 case VAX_780: uh->uh_uba->uba_dpr[bdp] |= UBADPR_BNE; break; #endif #if VAX750 case VAX_750: uh->uh_uba->uba_dpr[bdp] |= UBADPR_PURGE|UBADPR_NXM|UBADPR_UCE; break; #endif } uh->uh_bdpfree |= 1 << (bdp-1); /* atomic */ if (uh->uh_bdpwant) { uh->uh_bdpwant = 0; wakeup((caddr_t)&uh->uh_bdpwant); } } /* * Put back the registers in the resource map. * The map code must not be reentered, so we do this * at high ipl. */ npf = (mr >> 18) & 0x3ff; reg = ((mr >> 9) & 0x1ff) + 1; s = spl6(); rmfree(uh->uh_map, (long)npf, (long)reg); splx(s); /* * Wakeup sleepers for map registers, * and also, if there are processes blocked in dgo(), * give them a chance at the UNIBUS. */ if (uh->uh_mrwant) { uh->uh_mrwant = 0; wakeup((caddr_t)&uh->uh_mrwant); } while (uh->uh_actf && ubago(uh->uh_actf)) ; } ubapurge(um) register struct uba_ctlr *um; { register struct uba_hd *uh = um->um_hd; register int bdp = (um->um_ubinfo >> 28) & 0x0f; switch (cpu) { #if VAX780 case VAX_780: uh->uh_uba->uba_dpr[bdp] |= UBADPR_BNE; break; #endif #if VAX750 case VAX_750: uh->uh_uba->uba_dpr[bdp] |= UBADPR_PURGE|UBADPR_NXM|UBADPR_UCE; break; #endif } } ubainitmaps(uhp) register struct uba_hd *uhp; { rminit(uhp->uh_map, (long)NUBMREG, (long)1, "uba", UAMSIZ); switch (cpu) { #if VAX780 case VAX_780: uhp->uh_bdpfree = (1<<NBDP780) - 1; break; #endif #if VAX750 case VAX_750: uhp->uh_bdpfree = (1<<NBDP750) - 1; break; #endif #if VAX730 case VAX_730: break; #endif } } /* * Generate a reset on uba number uban. Then * call each device in the character device table, * giving it a chance to clean up so as to be able to continue. */ ubareset(uban) int uban; { register struct cdevsw *cdp; register struct uba_hd *uh = &uba_hd[uban]; int s; s = spl6(); uh->uh_users = 0; uh->uh_zvcnt = 0; uh->uh_xclu = 0; uh->uh_actf = uh->uh_actl = 0; uh->uh_bdpwant = 0; uh->uh_mrwant = 0; ubainitmaps(uh); wakeup((caddr_t)&uh->uh_bdpwant); wakeup((caddr_t)&uh->uh_mrwant); printf("uba%d: reset", uban); ubainit(uh->uh_uba); for (cdp = cdevsw; cdp < cdevsw + nchrdev; cdp++) (*cdp->d_reset)(uban); #ifdef INET ifubareset(uban); #endif printf("\n"); splx(s); } /* * Init a uba. This is called with a pointer * rather than a virtual address since it is called * by code which runs with memory mapping disabled. * In these cases we really don't need the interrupts * enabled, but since we run with ipl high, we don't care * if they are, they will never happen anyways. */ ubainit(uba) register struct uba_regs *uba; { switch (cpu) { #if VAX780 case VAX_780: uba->uba_cr = UBACR_ADINIT; uba->uba_cr = UBACR_IFS|UBACR_BRIE|UBACR_USEFIE|UBACR_SUEFIE; while ((uba->uba_cnfgr & UBACNFGR_UBIC) == 0) ; break; #endif #if VAX750 case VAX_750: #endif #if VAX730 case VAX_730: #endif #if defined(VAX750) || defined(VAX730) mtpr(IUR, 0); /* give devices time to recover from power fail */ /* THIS IS PROBABLY UNNECESSARY */ DELAY(500000); /* END PROBABLY UNNECESSARY */ break; #endif } } #ifdef VAX780 int ubawedgecnt = 10; int ubacrazy = 500; /* * This routine is called by the locore code to * process a UBA error on an 11/780. The arguments are passed * on the stack, and value-result (through some trickery). * In particular, the uvec argument is used for further * uba processing so the result aspect of it is very important. * It must not be declared register. */ /*ARGSUSED*/ ubaerror(uban, uh, xx, uvec, uba) register int uban; register struct uba_hd *uh; int uvec; register struct uba_regs *uba; { register sr, s; if (uvec == 0) { uh->uh_zvcnt++; if (uh->uh_zvcnt > 250000) { printf("uba%d: too many zero vectors\n"); ubareset(uban); } uvec = 0; return; } if (uba->uba_cnfgr & NEX_CFGFLT) { printf("uba%d: sbi fault sr=%b cnfgr=%b\n", uban, uba->uba_sr, ubasr_bits, uba->uba_cnfgr, NEXFLT_BITS); ubareset(uban); uvec = 0; return; } sr = uba->uba_sr; s = spl7(); printf("uba%d: uba error sr=%b fmer=%x fubar=%o\n", uban, uba->uba_sr, ubasr_bits, uba->uba_fmer, 4*uba->uba_fubar); splx(s); uba->uba_sr = sr; uvec &= UBABRRVR_DIV; if (++uh->uh_errcnt % ubawedgecnt == 0) { if (uh->uh_errcnt > ubacrazy) panic("uba crazy"); printf("ERROR LIMIT "); ubareset(uban); uvec = 0; return; } return; } #endif /* * Allocate UNIBUS memory. Allocates and initializes * sufficient mapping registers for access. On a 780, * the configuration register is setup to disable UBA * response on DMA transfers to addresses controlled * by the disabled mapping registers. */ ubamem(uban, addr, npg, doalloc) int uban, addr, npg, doalloc; { register struct uba_hd *uh = &uba_hd[uban]; register int a; if (doalloc) { int s = spl6(); a = rmget(uh->uh_map, npg, (addr >> 9) + 1); splx(s); } else a = (addr >> 9) + 1; if (a) { register int i, *m; m = (int *)&uh->uh_uba->uba_map[a - 1]; for (i = 0; i < npg; i++) *m++ = 0; /* All off, especially 'valid' */ #if VAX780 /* * On a 780, set up the map register disable * field in the configuration register. Beware * of callers that request memory ``out of order''. */ if (cpu == VAX_780) { int cr = uh->uh_uba->uba_cr; i = (addr + npg * 512 + 8191) / 8192; if (i > (cr >> 26)) uh->uh_uba->uba_cr |= i << 26; } #endif } return (a); } #include "ik.h" #if NIK > 0 /* * Map a virtual address into users address space. Actually all we * do is turn on the user mode write protection bits for the particular * page of memory involved. */ maptouser(vaddress) caddr_t vaddress; { Sysmap[(((unsigned)(vaddress))-0x80000000) >> 9].pg_prot = (PG_UW>>27); } unmaptouser(vaddress) caddr_t vaddress; { Sysmap[(((unsigned)(vaddress))-0x80000000) >> 9].pg_prot = (PG_KW>>27); } #endif