4.2BSD/usr/man/man8/fsck.8

Compare this file to the similar file:
Show the results in this format:
.de us
\\$1\l'|0\(ul'
..
.TH FSCK 8 "4 February 1983"
.UC 4
.SH NAME
fsck \- file system consistency check and interactive repair
.SH SYNOPSIS
.B /etc/fsck
.B \-p
[
filesystem ...
]
.br
.B /etc/fsck
[
.B \-b
block#
] [
.B \-y
] [
.B \-n
] [
filesystem 
] ...
.SH DESCRIPTION
The first form of
.I fsck
preens a standard set of filesystems or the specified file systems.
It is normally used in the script
.B /etc/rc
during automatic reboot.
In this case
.I fsck
reads the table
.B /etc/fstab
to determine which file systems to check.
It uses the information there to inspect groups of disks in parallel taking
maximum advantage of i/o overlap to check the file systems
as quickly as possible.
Normally, the root file system will be checked on pass 1, other
``root'' (``a'' partition) file systems on pass 2, other
small file systems on separate passes (e.g. the ``d'' file systems
on pass 3 and the ``e'' file systems on pass 4), and finally
the large user file systems on the last pass, e.g. pass 5.
A pass number of 0 in fstab causes a disk to not be checked; similarly
partitions which are not shown as to be mounted ``rw'' or ``ro''
are not checked.
.PP
The system takes care that only a restricted class of innocuous
inconsistencies can happen unless hardware or software failures intervene.
These are limited to the following:
.IP
Unreferenced inodes
.ns
.IP
Link counts in inodes too large
.ns
.IP
Missing blocks in the free list
.ns
.IP
Blocks in the free list also in files
.ns
.IP
Counts in the super-block wrong
.PP
These are the only inconsistencies which
.I fsck
with the
.B \-p
option will correct; if it encounters other inconsistencies, it exits
with an abnormal return status and an automatic reboot will then fail.
For each corrected inconsistency one or more lines will be printed
identifying the file system on which the correction will take place,
and the nature of the correction.  After successfully correcting a file
system,
.I fsck
will print the number of files on that file system and the number of
used and free blocks.
.PP
Without the
.B \-p
option,
.I fsck
audits and interactively repairs inconsistent conditions for file systems. 
If the file system is inconsistent the operator is prompted for concurrence
before each correction is attempted.
It should be noted that a number of the corrective actions which are not
fixable under the
.B \-p
option will result in some loss
of data.
The amount and severity of data lost may be determined from the diagnostic
output.
The default action for each consistency correction
is to wait for the operator to respond \fByes\fP or \fBno\fP.
If the operator does not have write permission 
.I fsck
will default to a 
.BR "\-n " action.
.PP
.I Fsck
has more consistency checks than
its predecessors
.IR "check, dcheck, fcheck, " "and" " icheck"
combined.
.PP
The following flags are interpreted by
.I fsck.
.TP 6
.B \-b
Use the block specified immediately after the flag as
the super block for the file system.  Block 32 is always
an alternate super block.
.TP 6
.B  \-y
Assume a yes response to all questions asked by 
.I fsck;
this should be used with great caution as this is a free license
to continue after essentially unlimited trouble has been encountered.
.TP 6
.B  \-n
Assume a no response to all questions asked by 
.I fsck;
do not open the file system for writing.
.PP
If no filesystems are given to 
.I fsck
then a default list of file systems is read from
the file
.BR /etc/fstab .
.PP
.ne 10
Inconsistencies checked are as follows:
.TP 6
1.
Blocks claimed by more than one inode or the free list.
.br
.br
.ns
.TP 6
2.
Blocks claimed by an inode or the free list outside the range of the file system.
.br
.br
.ns
.TP 6
3.
Incorrect link counts.
.br
.br
.ns
.TP 6
4.
Size checks:
.br
.ns
.IP "" 12
Directory size not of proper format.
.br
.br
.ns
.TP 6
5.
Bad inode format.
.br
.br
.ns
.TP 6
6.
Blocks not accounted for anywhere.
.br
.br
.ns
.TP 6
7.
Directory checks:
.br
.br
.ns
.IP "" 12
File pointing to unallocated inode.
.br
Inode number out of range.
.br
.br
.ns
.TP 6
8.
Super Block checks:
.br
.br
.ns
.IP "" 12
.br
More blocks for inodes than there are in the file system.
.br
.br
.ns
.TP 6
9.
Bad free block list format.
.br
.br
.ns
.TP 6
10.
Total free block and/or free inode count incorrect.
.PP
Orphaned files and directories (allocated but unreferenced) are,
with the operator's concurrence, reconnected by
placing them in the 
.B lost+found
directory.
The name assigned is the inode number. The only restriction
is that the directory 
.B lost+found
must preexist
in the root of the filesystem being checked and
must have empty slots in which entries can be made.
This is accomplished by making 
.BR lost+found ,
copying a number of files to the directory, and then removing them
(before
.I
fsck
is executed).
.PP
Checking the raw device is almost always faster.
.SH FILES
.br
.ns
.TP 21
/etc/fstab
contains default list of file systems to check.
.SH DIAGNOSTICS
The diagnostics produced by 
.I fsck
are intended to be self-explanatory.
.SH "SEE ALSO"
fstab(5),
fs(5),
newfs(8),
mkfs(8),
crash(8V),
reboot(8)
.SH BUGS
Inode numbers for
.BR . ""
and
.BR .. ""
in each directory should be checked for validity.
.PP
There should be some way to start a \fBfsck \-p\fR at pass \fIn\fR.