4.3BSD-Reno/share/man/cat3/sscanf.0
SCANF(3) 1989 SCANF(3)
NNAAMMEE
scanf, fscanf, sscanf - formatted input conversion
SSYYNNOOPPSSIISS
##iinncclluuddee <<ssttddiioo..hh>>
ssccaannff((ffoorrmmaatt [ , pointer ] . . . ))
cchhaarr **ffoorrmmaatt;;
ffssccaannff((ssttrreeaamm,, ffoorrmmaatt [ , pointer ] . . . ))
FFIILLEE **ssttrreeaamm;;
cchhaarr **ffoorrmmaatt;;
ssssccaannff((ss,, ffoorrmmaatt [ , pointer ] . . . ))
cchhaarr **ss,, **ffoorrmmaatt;;
DDEESSCCRRIIPPTTIIOONN
_S_c_a_n_f reads from the standard input stream ssttddiinn. _F_s_c_a_n_f
reads from the named input _s_t_r_e_a_m. _S_s_c_a_n_f reads from the
character string _s. Each function reads characters, inter-
prets them according to a format, and stores the results in
its arguments. Each expects as arguments a control string
_f_o_r_m_a_t, described below, and a set of _p_o_i_n_t_e_r arguments
indicating where the converted input should be stored.
The control string usually contains conversion specifica-
tions, which are used to direct interpretation of input
sequences. The control string may contain:
1. Blanks, tabs or newlines, which match optional white
space in the input.
2. An ordinary character (not %) which must match the next
character of the input stream.
3. Conversion specifications, consisting of the character
%%, an optional assignment suppressing character **, an
optional numerical maximum field width, and a conversion
character.
A conversion specification directs the conversion of the
next input field; the result is placed in the variable
pointed to by the corresponding argument, unless assignment
suppression was indicated by **. An input field is defined
as a string of non-space characters; it extends to the next
inappropriate character or until the field width, if speci-
fied, is exhausted.
The conversion character indicates the interpretation of the
input field; the corresponding pointer argument must usually
be of a restricted type. The following conversion charac-
ters are legal:
Printed 7/27/90 April 1
SCANF(3) 1989 SCANF(3)
%% a single `%' is expected in the input at this point; no
assignment is done.
dd a decimal integer is expected; the corresponding argu-
ment should be an integer pointer.
oo an octal integer is expected; the corresponding argument
should be a integer pointer.
xx a hexadecimal integer is expected; the corresponding
argument should be an integer pointer.
ss a character string is expected; the corresponding argu-
ment should be a character pointer pointing to an array
of characters large enough to accept the string and a
terminating `\0', which will be added. The input field
is terminated by a space character or a newline.
cc a character is expected; the corresponding argument
should be a character pointer. The normal skip over
space characters is suppressed in this case; to read the
next non-space character, try `%1s'. If a field width
is given, the corresponding argument should refer to a
character array, and the indicated number of characters
is read.
ee
ff
a floating point number is expected; the next field is
converted accordingly and stored through the correspond-
ing argument, which should be a pointer to a _f_l_o_a_t. The
input format for floating point numbers is an optionally
signed string of digits possibly containing a decimal
point, followed by an optional exponent field consisting
of an E or e followed by an optionally signed integer.
[[ indicates a string not to be delimited by space charac-
ters. The left bracket is followed by a set of charac-
ters and a right bracket; the characters between the
brackets define a set of characters making up the
string. If the first character is not circumflex (^),
the input field is all characters until the first char-
acter not in the set between the brackets; if the first
character after the left bracket is ^, the input field
is all characters until the first character which is in
the remaining set of characters between the brackets.
The corresponding argument must point to a character
array.
The conversion characters dd, oo and xx may be capitalized or
preceded by ll to indicate that a pointer to lloonngg rather than
to iinntt is in the argument list. Similarly, the conversion
characters ee or ff may be capitalized or preceded by ll to
indicate a pointer to ddoouubbllee rather than to ffllooaatt. The
Printed 7/27/90 April 2
SCANF(3) 1989 SCANF(3)
conversion characters dd, oo and xx may be preceded by hh to
indicate a pointer to sshhoorrtt rather than to iinntt.
The _s_c_a_n_f functions return the number of successfully
matched and assigned input items. This can be used to
decide how many input items were found. The constant EEOOFF is
returned upon end of input; note that this is different from
0, which means that no conversion was done; if conversion
was intended, it was frustrated by an inappropriate charac-
ter in the input.
For example, the call
int i; float x; char name[50];
scanf("%d%f%s", &i, &x, name);
with the input line
25 54.32E-1 thompson
will assign to _i the value 25, _x the value 5.432, and _n_a_m_e
will contain `_t_h_o_m_p_s_o_n_\_0'. Or,
int i; float x; char name[50];
scanf("%2d%f%*d%[1234567890]", &i, &x, name);
with input
56789 0123 56a72
will assign 56 to _i, 789.0 to _x, skip `0123', and place the
string `56\0' in _n_a_m_e. The next call to _g_e_t_c_h_a_r will return
`a'.
SSEEEE AALLSSOO
atof(3), getc(3), printf(3)
DDIIAAGGNNOOSSTTIICCSS
The _s_c_a_n_f functions return EEOOFF on end of input, and a short
count for missing or illegal data items.
BBUUGGSS
The success of literal matches and suppressed assignments is
not directly determinable.
Printed 7/27/90 April 3