4.3BSD-Reno/src/sbin/enpload/enpload.8

Compare this file to the similar file:
Show the results in this format:

.\" Copyright (c) 1987 The Regents of the University of California.
.\" All rights reserved.
.\"
.\" This code is derived from software contributed to Berkeley by
.\" Computer Consoles Inc.
.\"
.\" Redistribution and use in source and binary forms are permitted provided
.\" that: (1) source distributions retain this entire copyright notice and
.\" comment, and (2) distributions including binaries display the following
.\" acknowledgement:  ``This product includes software developed by the
.\" University of California, Berkeley and its contributors'' in the
.\" documentation or other materials provided with the distribution and in
.\" all advertising materials mentioning features or use of this software.
.\" Neither the name of the University nor the names of its contributors may
.\" be used to endorse or promote products derived from this software without
.\" specific prior written permission.
.\" THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
.\" WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
.\" MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
.\"
.\"	@(#)enpload.8	5.3 (Berkeley) 6/24/90
.\"
.TH ENPLOAD 8 "June 24, 1990"
.UC 5
.SH NAME
enpload \- download firmware and initialize a CMC Ethernet controller
.SH SYOPNSIS
.B enpload
.I device
[
.I files
]
.SH DESCRIPTION
.I Enpload
is used to download firmware and initialize a CMC
ENP-20 Ethernet controller.
The
.I device
specified is a character device used to access the on-board
RAM which hosts the controllers operating firmware;
the
.I files
arguments specify the firmware file(s) to load into this memory.
After
.I enpload
deposits the specified firmware it starts the board running.
If no firmware is specified the board is just restarted.
.I Enpload
must be run before a CMC controller can be used by the
system.
.SH FILES
.ta \w'/dev/enp?ram    'u
/dev/enp?ram	special files for accessing ENP-20 memory
.br
/etc/enpcode	link-level firmware
.SH "SEE ALSO"
enp(4), ifconfig(8C), rc(8)