4.3BSD-Reno/src/sys/hpdev/grf_gb.c

/*
 * Copyright (c) 1988 University of Utah.
 * Copyright (c) 1990 The Regents of the University of California.
 * All rights reserved.
 *
 * This code is derived from software contributed to Berkeley by
 * the Systems Programming Group of the University of Utah Computer
 * Science Department.
 *
 * Redistribution is only permitted until one year after the first shipment
 * of 4.4BSD by the Regents.  Otherwise, redistribution and use in source and
 * binary forms are permitted provided that: (1) source distributions retain
 * this entire copyright notice and comment, and (2) distributions including
 * binaries display the following acknowledgement:  This product includes
 * software developed by the University of California, Berkeley and its
 * contributors'' in the documentation or other materials provided with the
 * distribution and in all advertising materials mentioning features or use
 * of this software.  Neither the name of the University nor the names of
 * its contributors may be used to endorse or promote products derived from
 * this software without specific prior written permission.
 * THIS SOFTWARE IS PROVIDED AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
 *
 * from: Utah $Hdr: grf_gb.c 1.13 89/04/11$
 *
 *	@(#)grf_gb.c	7.1 (Berkeley) 5/8/90
 */

#include "grf.h"
#if NGRF > 0

/*
 * Graphics routines for the Gatorbox.
 *
 * Note: In the context of this system, "gator" and "gatorbox" both refer to
 *       HP 987x0 graphics systems.  "Gator" is not used for high res mono.
 *       (as in 9837 Gator systems)
 */
#include "param.h"
#include "errno.h"

#include "grfioctl.h"
#include "grfvar.h"
#include "grf_gbreg.h"

#include "machine/cpu.h"

#define CRTC_DATA_LENGTH  0x0e
u_char crtc_init_data[CRTC_DATA_LENGTH] = {
    0x29, 0x20, 0x23, 0x04, 0x30, 0x0b, 0x30,
    0x30, 0x00, 0x0f, 0x00, 0x00, 0x00, 0x00
};

/*
 * Initialize hardware.
 * Must point g_display at a grfinfo structure describing the hardware.
 * Returns 0 if hardware not present, non-zero ow.
 */
gb_init(gp, addr)
	struct grf_softc *gp;
	u_char *addr;
{
	register struct gboxfb *gbp;
	struct grfinfo *gi = &gp->g_display;
	u_char *fbp, save;
	int fboff;

	gbp = (struct gboxfb *) addr;
	gi->gd_regaddr = (caddr_t) UNIOV(addr);
	gi->gd_regsize = 0x10000;
	gi->gd_fbwidth = 1024;		/* XXX */
	gi->gd_fbheight = 1024;		/* XXX */
	fboff = (gbp->fbomsb << 8) | gbp->fbolsb;
	gi->gd_fbaddr = (caddr_t) (*(addr + fboff) << 16);
	gi->gd_fbsize = gi->gd_fbwidth * gi->gd_fbheight;
	gi->gd_dwidth = 1024;		/* XXX */
	gi->gd_dheight = 768;		/* XXX */
	gi->gd_planes = 0;		/* how do we do this? */
	/*
	 * The minimal register info here is from the Gatorbox X driver.
	 */
	fbp = (u_char *) IOV(gi->gd_fbaddr);
	gbp->write_protect = 0;
	gbp->interrupt = 4;		/** fb_enable ? **/
	gbp->rep_rule = 3;		/* GXcopy */
	gbp->blink1 = 0xff;
	gbp->blink2 = 0xff;

	gb_microcode(gbp);

	/*
	 * Find out how many colors are available by determining
	 * which planes are installed.  That is, write all ones to
	 * a frame buffer location, see how many ones are read back.
	 */
	save = *fbp;
	*fbp = 0xFF;
	gi->gd_colors = *fbp + 1;
	*fbp = save;
	return(1);
}

/*
 * Program the 6845.
 */
gb_microcode(gbp)
	register struct gboxfb *gbp;
{
	register int i;
	
	for (i = 0; i < CRTC_DATA_LENGTH; i++) {
		gbp->crtc_address = i;
		gbp->crtc_data = crtc_init_data[i];
	}
}

/*
 * Change the mode of the display.
 * Right now all we can do is grfon/grfoff.
 * Return a UNIX error number or 0 for success.
 */
gb_mode(gp, cmd)
	register struct grf_softc *gp;
{
	struct gboxfb *gbp;
	int error = 0;

	gbp = (struct gboxfb *) IOV(gp->g_display.gd_regaddr);
	switch (cmd) {
	case GM_GRFON:
		gbp->sec_interrupt = 1;
		break;
	case GM_GRFOFF:
		break;
	default:
		error = EINVAL;
		break;
	}
	return(error);
}

#endif