4.3BSD-Reno/src/sys/sys/protosw.h
/*
* Copyright (c) 1982, 1986 Regents of the University of California.
* All rights reserved.
*
* Redistribution is only permitted until one year after the first shipment
* of 4.4BSD by the Regents. Otherwise, redistribution and use in source and
* binary forms are permitted provided that: (1) source distributions retain
* this entire copyright notice and comment, and (2) distributions including
* binaries display the following acknowledgement: This product includes
* software developed by the University of California, Berkeley and its
* contributors'' in the documentation or other materials provided with the
* distribution and in all advertising materials mentioning features or use
* of this software. Neither the name of the University nor the names of
* its contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
* THIS SOFTWARE IS PROVIDED AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
*
* @(#)protosw.h 7.6 (Berkeley) 6/28/90
*/
/*
* Protocol switch table.
*
* Each protocol has a handle initializing one of these structures,
* which is used for protocol-protocol and system-protocol communication.
*
* A protocol is called through the pr_init entry before any other.
* Thereafter it is called every 200ms through the pr_fasttimo entry and
* every 500ms through the pr_slowtimo for timer based actions.
* The system will call the pr_drain entry if it is low on space and
* this should throw away any non-critical data.
*
* Protocols pass data between themselves as chains of mbufs using
* the pr_input and pr_output hooks. Pr_input passes data up (towards
* UNIX) and pr_output passes it down (towards the imps); control
* information passes up and down on pr_ctlinput and pr_ctloutput.
* The protocol is responsible for the space occupied by any the
* arguments to these entries and must dispose it.
*
* The userreq routine interfaces protocols to the system and is
* described below.
*/
struct protosw {
short pr_type; /* socket type used for */
struct domain *pr_domain; /* domain protocol a member of */
short pr_protocol; /* protocol number */
short pr_flags; /* see below */
/* protocol-protocol hooks */
int (*pr_input)(); /* input to protocol (from below) */
int (*pr_output)(); /* output to protocol (from above) */
int (*pr_ctlinput)(); /* control input (from below) */
int (*pr_ctloutput)(); /* control output (from above) */
/* user-protocol hook */
int (*pr_usrreq)(); /* user request: see list below */
/* utility hooks */
int (*pr_init)(); /* initialization hook */
int (*pr_fasttimo)(); /* fast timeout (200ms) */
int (*pr_slowtimo)(); /* slow timeout (500ms) */
int (*pr_drain)(); /* flush any excess space possible */
};
#define PR_SLOWHZ 2 /* 2 slow timeouts per second */
#define PR_FASTHZ 5 /* 5 fast timeouts per second */
/*
* Values for pr_flags.
* PR_ADDR requires PR_ATOMIC;
* PR_ADDR and PR_CONNREQUIRED are mutually exclusive.
*/
#define PR_ATOMIC 0x01 /* exchange atomic messages only */
#define PR_ADDR 0x02 /* addresses given with messages */
#define PR_CONNREQUIRED 0x04 /* connection required by protocol */
#define PR_WANTRCVD 0x08 /* want PRU_RCVD calls */
#define PR_RIGHTS 0x10 /* passes capabilities */
/*
* The arguments to usrreq are:
* (*protosw[].pr_usrreq)(up, req, m, nam, opt);
* where up is a (struct socket *), req is one of these requests,
* m is a optional mbuf chain containing a message,
* nam is an optional mbuf chain containing an address,
* and opt is a pointer to a socketopt structure or nil.
* The protocol is responsible for disposal of the mbuf chain m,
* the caller is responsible for any space held by nam and opt.
* A non-zero return from usrreq gives an
* UNIX error number which should be passed to higher level software.
*/
#define PRU_ATTACH 0 /* attach protocol to up */
#define PRU_DETACH 1 /* detach protocol from up */
#define PRU_BIND 2 /* bind socket to address */
#define PRU_LISTEN 3 /* listen for connection */
#define PRU_CONNECT 4 /* establish connection to peer */
#define PRU_ACCEPT 5 /* accept connection from peer */
#define PRU_DISCONNECT 6 /* disconnect from peer */
#define PRU_SHUTDOWN 7 /* won't send any more data */
#define PRU_RCVD 8 /* have taken data; more room now */
#define PRU_SEND 9 /* send this data */
#define PRU_ABORT 10 /* abort (fast DISCONNECT, DETATCH) */
#define PRU_CONTROL 11 /* control operations on protocol */
#define PRU_SENSE 12 /* return status into m */
#define PRU_RCVOOB 13 /* retrieve out of band data */
#define PRU_SENDOOB 14 /* send out of band data */
#define PRU_SOCKADDR 15 /* fetch socket's address */
#define PRU_PEERADDR 16 /* fetch peer's address */
#define PRU_CONNECT2 17 /* connect two sockets */
/* begin for protocols internal use */
#define PRU_FASTTIMO 18 /* 200ms timeout */
#define PRU_SLOWTIMO 19 /* 500ms timeout */
#define PRU_PROTORCV 20 /* receive from below */
#define PRU_PROTOSEND 21 /* send to below */
#define PRU_NREQ 21
#ifdef PRUREQUESTS
char *prurequests[] = {
"ATTACH", "DETACH", "BIND", "LISTEN",
"CONNECT", "ACCEPT", "DISCONNECT", "SHUTDOWN",
"RCVD", "SEND", "ABORT", "CONTROL",
"SENSE", "RCVOOB", "SENDOOB", "SOCKADDR",
"PEERADDR", "CONNECT2", "FASTTIMO", "SLOWTIMO",
"PROTORCV", "PROTOSEND",
};
#endif
/*
* The arguments to the ctlinput routine are
* (*protosw[].pr_ctlinput)(cmd, sa, arg);
* where cmd is one of the commands below, sa is a pointer to a sockaddr,
* and arg is an optional caddr_t argument used within a protocol family.
*/
#define PRC_IFDOWN 0 /* interface transition */
#define PRC_ROUTEDEAD 1 /* select new route if possible ??? */
#define PRC_QUENCH2 3 /* DEC congestion bit says slow down */
#define PRC_QUENCH 4 /* some one said to slow down */
#define PRC_MSGSIZE 5 /* message size forced drop */
#define PRC_HOSTDEAD 6 /* host appears to be down */
#define PRC_HOSTUNREACH 7 /* deprecated (use PRC_UNREACH_HOST) */
#define PRC_UNREACH_NET 8 /* no route to network */
#define PRC_UNREACH_HOST 9 /* no route to host */
#define PRC_UNREACH_PROTOCOL 10 /* dst says bad protocol */
#define PRC_UNREACH_PORT 11 /* bad port # */
/* was PRC_UNREACH_NEEDFRAG 12 (use PRC_MSGSIZE) */
#define PRC_UNREACH_SRCFAIL 13 /* source route failed */
#define PRC_REDIRECT_NET 14 /* net routing redirect */
#define PRC_REDIRECT_HOST 15 /* host routing redirect */
#define PRC_REDIRECT_TOSNET 16 /* redirect for type of service & net */
#define PRC_REDIRECT_TOSHOST 17 /* redirect for tos & host */
#define PRC_TIMXCEED_INTRANS 18 /* packet lifetime expired in transit */
#define PRC_TIMXCEED_REASS 19 /* lifetime expired on reass q */
#define PRC_PARAMPROB 20 /* header incorrect */
#define PRC_NCMDS 21
#define PRC_IS_REDIRECT(cmd) \
((cmd) >= PRC_REDIRECT_NET && (cmd) <= PRC_REDIRECT_TOSHOST)
#ifdef PRCREQUESTS
char *prcrequests[] = {
"IFDOWN", "ROUTEDEAD", "#2", "DEC-BIT-QUENCH2",
"QUENCH", "MSGSIZE", "HOSTDEAD", "#7",
"NET-UNREACH", "HOST-UNREACH", "PROTO-UNREACH", "PORT-UNREACH",
"#12", "SRCFAIL-UNREACH", "NET-REDIRECT", "HOST-REDIRECT",
"TOSNET-REDIRECT", "TOSHOST-REDIRECT", "TX-INTRANS", "TX-REASS",
"PARAMPROB"
};
#endif
/*
* The arguments to ctloutput are:
* (*protosw[].pr_ctloutput)(req, so, level, optname, optval);
* req is one of the actions listed below, so is a (struct socket *),
* level is an indication of which protocol layer the option is intended.
* optname is a protocol dependent socket option request,
* optval is a pointer to a mbuf-chain pointer, for value-return results.
* The protocol is responsible for disposal of the mbuf chain *optval
* if supplied,
* the caller is responsible for any space held by *optval, when returned.
* A non-zero return from usrreq gives an
* UNIX error number which should be passed to higher level software.
*/
#define PRCO_GETOPT 0
#define PRCO_SETOPT 1
#define PRCO_NCMDS 2
#ifdef PRCOREQUESTS
char *prcorequests[] = {
"GETOPT", "SETOPT",
};
#endif
#ifdef KERNEL
extern struct protosw *pffindproto(), *pffindtype();
#endif