4.3BSD-Reno/src/sys/tahoevba/psproto.h

/*
 * Copyright (c) 1986 The Regents of the University of California.
 * All rights reserved.
 *
 * Redistribution is only permitted until one year after the first shipment
 * of 4.4BSD by the Regents.  Otherwise, redistribution and use in source and
 * binary forms are permitted provided that: (1) source distributions retain
 * this entire copyright notice and comment, and (2) distributions including
 * binaries display the following acknowledgement:  This product includes
 * software developed by the University of California, Berkeley and its
 * contributors'' in the documentation or other materials provided with the
 * distribution and in all advertising materials mentioning features or use
 * of this software.  Neither the name of the University nor the names of
 * its contributors may be used to endorse or promote products derived from
 * this software without specific prior written permission.
 * THIS SOFTWARE IS PROVIDED AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
 *
 *	@(#)psproto.h	7.3 (Berkeley) 6/28/90
 */

/*
 * PS300-Host Handshake Protocol Definitions.
 */

/*
 * Commands sent from host->PS300.
 *
 * In the initial handshake carried out when requesting
 * one of these commands be performed, the PS300 always
 * returns the identical code to indicate success.
 */
#define PS_ABORT        0x1000  /* abort current command */
#define PS_RESET        0x3000  /* reset device */
#define PS_RDNET        0x5000  /* logical read */
#define PS_LOOKUP       0x8000  /* name lookup */
#define PS_RDPHY        0x9000  /* physical read */
#define PS_WRPHY_SYNC   0xa000  /* physical write w/ sync */
#define PS_WRPHY        0xb000  /* physical write */
#define PS_WRNET        0xc000  /* logical write */
#define PS_DETACH       0xd000  /* normal/diagnostic detach */
#define PS_ATTACH       0xe000  /* normal attach */
#define PS_DATTACH      0xf000  /* diagnostic attach */

#define PS_DIOREAD      0x4000  /* internal, wait for dioread attention */

/*
 * Command responses from PS300->host.
 */
#define PS_DMAOK(code)  ((code)|0x0a00) /* successful dma transfer */ 
#define PS_ADROK(code)  ((code)|0x0100) /* successful address tranfer */

#define PS_CODE(v)      ((v)&0xf000)    /* extract code from PS300 msg */
#define PS_LUNIT(v)     ((v)&0x000f)    /* extract PS300 unit from msg */

/*
 * Single unit PS300 address list.
 */
struct  psalist {
        u_short nblocks;                /* # of i/o vectors (we always use 1) */
        u_short addr[2];                /* PS300 address */
        u_short wc;                     /* transfer size */
};

/*
 * The max dma size is actually 64KB, but
 * we limit it to be just large enough for
 * the maximum vector list as this is sufficient
 * for our needs and we must allocate real
 * memory to the intermediate buffer.
 */
#define PS_MAXDMA       (1024+2048*12)

/*
 * Pseudo commands used internally by the driver.
 */
#define PS_DMAOUT       0x0100          /* dma buffer host->PS300 */
#define PS_DMAIN        0x0200          /* dma buffer PS300->host */

/*
 * Default timeouts.
 */
#define PS_TIMEOUT      30              /* dma/attention timeout (in hz) */
#define PS_DIOTIMO      1000            /* dio polling timeout */