4.3BSD-Reno/src/sys/vaxif/if_ex.c
/*
* Copyright (c) 1982, 1986 Regents of the University of California.
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* Excelan Inc.
*
* Redistribution is only permitted until one year after the first shipment
* of 4.4BSD by the Regents. Otherwise, redistribution and use in source and
* binary forms are permitted provided that: (1) source distributions retain
* this entire copyright notice and comment, and (2) distributions including
* binaries display the following acknowledgement: This product includes
* software developed by the University of California, Berkeley and its
* contributors'' in the documentation or other materials provided with the
* distribution and in all advertising materials mentioning features or use
* of this software. Neither the name of the University nor the names of
* its contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
* THIS SOFTWARE IS PROVIDED AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
*
* @(#)if_ex.c 7.8 (Berkeley) 6/28/90
*/
#include "ex.h"
#if NEX > 0
/*
* Excelan EXOS 204 Interface
*
* George Powers
* Excelan Inc.
*/
#include "param.h"
#include "systm.h"
#include "mbuf.h"
#include "buf.h"
#include "protosw.h"
#include "socket.h"
#include "vmmac.h"
#include "ioctl.h"
#include "syslog.h"
#include "errno.h"
#include "../net/if.h"
#include "../net/netisr.h"
#include "../net/route.h"
#ifdef INET
#include "../netinet/in.h"
#include "../netinet/in_systm.h"
#include "../netinet/in_var.h"
#include "../netinet/ip.h"
#include "../netinet/if_ether.h"
#endif
#ifdef NS
#include "../netns/ns.h"
#include "../netns/ns_if.h"
#endif
#ifdef ISO
#include "../netiso/iso.h"
#include "../netiso/iso_var.h"
extern char all_es_snpa[], all_is_snpa[];
#endif
#include "../vax/pte.h"
#include "../vax/cpu.h"
#include "../vax/mtpr.h"
#include "if_exreg.h"
#include "if_uba.h"
#include "../vaxuba/ubareg.h"
#include "../vaxuba/ubavar.h"
/* #define DEBUG /* check for "impossible" events */
#define NH2X 4 /* a sufficient number is critical */
#define NX2H 4 /* this is pretty arbitrary */
#define EXWATCHINTVL 10 /* call exwatch() every 10 seconds */
int exprobe(), exattach(), excdint();
struct uba_device *exinfo[NEX];
u_short exstd[] = { 0 };
struct uba_driver exdriver =
{ exprobe, 0, exattach, 0, exstd, "ex", exinfo };
int exinit(),exstart(),ether_output(),exioctl(),exreset(),exwatch();
struct ex_msg *exgetcbuf();
/*
* Ethernet software status per interface.
*
* Each interface is referenced by a network interface structure,
* xs_if, which the routing code uses to locate the interface.
* This structure contains the output queue for the interface, its address, ...
* We also have, for each interface, a UBA interface structure, which
* contains information about the UNIBUS resources held by the interface:
* map registers, buffered data paths, etc. Information is cached in this
* structure for use by the if_uba.c routines in running the interface
* efficiently.
*/
struct ex_softc {
struct arpcom xs_ac; /* Ethernet common part */
#define xs_if xs_ac.ac_if /* network-visible interface */
#define xs_addr xs_ac.ac_enaddr /* hardware Ethernet address */
#ifdef DEBUG
int xs_wait;
#endif
struct ifuba xs_ifuba; /* UNIBUS resources */
int xs_flags; /* private flags */
#define EX_XPENDING 1 /* xmit rqst pending on EXOS */
#define EX_STATPENDING (1<<1) /* stats rqst pending on EXOS */
#define EX_RUNNING (1<<2) /* board is running */
#define EX_SETADDR (1<<3) /* physaddr has been changed */
struct ex_msg *xs_h2xnext; /* host pointer to request queue */
struct ex_msg *xs_x2hnext; /* host pointer to reply queue */
int xs_ubaddr; /* map info for structs below */
#define UNIADDR(x) ((u_long)(x)&0x3FFFF)
#define P_UNIADDR(x) ((u_long)(x)&0x3FFF0)
/* the following structures are always mapped in */
u_short xs_h2xhdr; /* EXOS's request queue header */
u_short xs_x2hhdr; /* EXOS's reply queue header */
struct ex_msg xs_h2xent[NH2X]; /* request msg buffers */
struct ex_msg xs_x2hent[NX2H]; /* reply msg buffers */
struct confmsg xs_cm; /* configuration message */
struct stat_array xs_xsa; /* EXOS writes stats here */
/* end mapped area */
#define INCORE_BASE(p) ((caddr_t)((u_long)(&(p)->xs_h2xhdr) & 0xFFFFFFF0))
#define RVAL_OFF(unit, n) \
((caddr_t)(&(ex_softc[unit].n)) - INCORE_BASE(&ex_softc[unit]))
#define LVAL_OFF(unit, n) \
((caddr_t)(ex_softc[unit].n) - INCORE_BASE(&ex_softc[unit]))
#define H2XHDR_OFFSET(unit) RVAL_OFF(unit, xs_h2xhdr)
#define X2HHDR_OFFSET(unit) RVAL_OFF(unit, xs_x2hhdr)
#define H2XENT_OFFSET(unit) LVAL_OFF(unit, xs_h2xent)
#define X2HENT_OFFSET(unit) LVAL_OFF(unit, xs_x2hent)
#define CM_OFFSET(unit) RVAL_OFF(unit, xs_cm)
#define SA_OFFSET(unit) RVAL_OFF(unit, xs_xsa)
#define INCORE_SIZE(unit) RVAL_OFF(unit, xs_end)
int xs_end; /* place holder */
} ex_softc[NEX];
/*
* The following structure is a kludge to store a cvec value
* between the time exprobe is called, and exconfig.
*/
struct ex_cvecs {
struct exdevice *xc_csraddr;
int xc_cvec;
}ex_cvecs[NEX];
int ex_ncall = 0; /* counts calls to exprobe */
exprobe(reg)
caddr_t reg;
{
register int br, cvec; /* r11, r10 value-result */
register struct exdevice *addr = (struct exdevice *)reg;
register i;
/*
* We program the EXOS interrupt vector, like dmf device.
*/
br = 0x15;
cvec = (uba_hd[numuba].uh_lastiv -= 4);
ex_cvecs[ex_ncall].xc_csraddr = addr;
ex_cvecs[ex_ncall].xc_cvec = cvec;
/*
* Reset EXOS and run self-test (guaranteed to
* complete within 2 seconds).
*/
addr->xd_porta = EX_RESET;
i = 2000;
while (((addr->xd_portb & EX_TESTOK) == 0) && --i)
DELAY(1000);
if ((addr->xd_portb & EX_TESTOK) == 0) {
printf("ex: self-test failed\n");
return 0;
}
#ifdef lint
br = br;
excdint(0);
#endif
ex_ncall++;
return (sizeof(struct exdevice));
}
/*
* Interface exists: make available by filling in network interface
* record. System will initialize the interface when it is ready
* to accept packets. Board is temporarily configured and issues
* a NET_ADDRS command, only to get the Ethernet address.
*/
exattach(ui)
register struct uba_device *ui;
{
register struct ex_softc *xs = &ex_softc[ui->ui_unit];
register struct ifnet *ifp = &xs->xs_if;
register struct exdevice *addr = (struct exdevice *)ui->ui_addr;
register struct ex_msg *bp;
int unit = ui->ui_unit;
ifp->if_unit = ui->ui_unit;
ifp->if_name = "ex";
ifp->if_mtu = ETHERMTU;
/*
* Temporarily map queues in order to configure EXOS
*/
xs->xs_ubaddr = uballoc(ui->ui_ubanum, INCORE_BASE(xs),
INCORE_SIZE(unit), 0);
exconfig(ui, 0); /* without interrupts */
if (xs->xs_cm.cm_cc) goto badconf;
bp = exgetcbuf(xs);
bp->mb_rqst = LLNET_ADDRS;
bp->mb_na.na_mask = READ_OBJ;
bp->mb_na.na_slot = PHYSSLOT;
bp->mb_status |= MH_EXOS;
addr->xd_portb = EX_NTRUPT;
bp = xs->xs_x2hnext;
while ((bp->mb_status & MH_OWNER) == MH_EXOS) /* poll for reply */
;
printf("ex%d: HW %c.%c, NX %c.%c, hardware address %s\n",
ui->ui_unit, xs->xs_cm.cm_vc[2], xs->xs_cm.cm_vc[3],
xs->xs_cm.cm_vc[0], xs->xs_cm.cm_vc[1],
ether_sprintf(bp->mb_na.na_addrs));
bcopy((caddr_t)bp->mb_na.na_addrs, (caddr_t)xs->xs_addr,
sizeof (xs->xs_addr));
ifp->if_init = exinit;
ifp->if_output = ether_output;
ifp->if_start = exstart;
ifp->if_ioctl = exioctl;
ifp->if_reset = exreset;
ifp->if_flags = IFF_BROADCAST;
xs->xs_ifuba.ifu_flags = UBA_CANTWAIT;
if_attach(ifp);
badconf:
ubarelse(ui->ui_ubanum, &xs->xs_ubaddr);
}
/*
* Reset of interface after UNIBUS reset.
* If interface is on specified uba, reset its state.
*/
exreset(unit, uban)
int unit, uban;
{
register struct uba_device *ui;
if (unit >= NEX || (ui = exinfo[unit]) == 0 || ui->ui_alive == 0 ||
ui->ui_ubanum != uban)
return;
printf(" ex%d", unit);
ex_softc[unit].xs_if.if_flags &= ~IFF_RUNNING;
ex_softc[unit].xs_flags &= ~EX_RUNNING;
exinit(unit);
}
/*
* Initialization of interface; clear recorded pending
* operations, and reinitialize UNIBUS usage.
* Called at boot time (with interrupts disabled?),
* and at ifconfig time via exioctl, with interrupts disabled.
*/
exinit(unit)
int unit;
{
register struct ex_softc *xs = &ex_softc[unit];
register struct uba_device *ui = exinfo[unit];
register struct exdevice *addr = (struct exdevice *)ui->ui_addr;
register struct ifnet *ifp = &xs->xs_if;
register struct ex_msg *bp;
int s;
/* not yet, if address still unknown */
if (ifp->if_addrlist == (struct ifaddr *)0)
return;
if (xs->xs_flags & EX_RUNNING)
return;
if ((ifp->if_flags & IFF_RUNNING) == 0) {
if (if_ubainit(&xs->xs_ifuba, ui->ui_ubanum,
sizeof (struct ether_header),
(int)btoc(EXMAXRBUF-sizeof(struct ether_header))) == 0) {
printf("ex%d: can't initialize\n", unit);
xs->xs_if.if_flags &= ~IFF_UP;
return;
}
xs->xs_ubaddr = uballoc(ui->ui_ubanum, INCORE_BASE(xs),
INCORE_SIZE(unit), 0);
}
exconfig(ui, 4); /* with vectored interrupts*/
/*
* Put EXOS on the Ethernet, using NET_MODE command
*/
bp = exgetcbuf(xs);
bp->mb_rqst = LLNET_MODE;
bp->mb_nm.nm_mask = WRITE_OBJ;
bp->mb_nm.nm_optn = 0;
bp->mb_nm.nm_mode = MODE_PERF;
bp->mb_status |= MH_EXOS;
addr->xd_portb = EX_NTRUPT;
bp = xs->xs_x2hnext;
while ((bp->mb_status & MH_OWNER) == MH_EXOS) /* poll for reply */
;
bp->mb_length = MBDATALEN;
bp->mb_status |= MH_EXOS; /* free up buffer */
addr->xd_portb = EX_NTRUPT; /* tell EXOS about it */
xs->xs_x2hnext = xs->xs_x2hnext->mb_next;
ifp->if_watchdog = exwatch;
ifp->if_timer = EXWATCHINTVL;
s = splimp(); /* are interrupts always disabled here, anyway? */
exhangrcv(unit); /* hang receive request */
xs->xs_if.if_flags |= IFF_RUNNING;
xs->xs_flags |= EX_RUNNING;
if (xs->xs_flags & EX_SETADDR)
ex_setaddr((u_char *)0, unit);
#ifdef ISO
ex_setmulti(all_es_snpa, unit, 1);
ex_setmulti(all_is_snpa, unit, 2);
#endif
(void) exstart(&xs->xs_if); /* start transmits */
splx(s);
}
/*
* Reset, test, and configure EXOS. This routine assumes
* that message queues, etc. have already been mapped into
* the UBA. It is called by exinit, and should also be
* callable by exattach.
*/
exconfig(ui, itype)
struct uba_device *ui;
int itype;
{
register int unit = ui->ui_unit;
register struct ex_softc *xs = &ex_softc[unit];
register struct exdevice *addr = (struct exdevice *) ui->ui_addr;
register struct confmsg *cm = &xs->xs_cm;
register struct ex_msg *bp;
int i;
u_long shiftreg;
xs->xs_flags = 0;
/*
* Reset EXOS, wait for self-test to complete
*/
addr->xd_porta = EX_RESET;
while ((addr->xd_portb & EX_TESTOK) == 0)
;
/*
* Set up configuration message.
*/
cm->cm_1rsrv = 1;
cm->cm_cc = 0xFF;
cm->cm_opmode = 0; /* link-level controller mode */
cm->cm_dfo = 0x0101; /* enable host data order conversion */
cm->cm_dcn1 = 1;
cm->cm_2rsrv[0] = cm->cm_2rsrv[1] = 0;
cm->cm_ham = 3; /* absolute address mode */
cm->cm_3rsrv = 0;
cm->cm_mapsiz = 0;
cm->cm_byteptrn[0] = 0x01; /* EXOS deduces data order of host */
cm->cm_byteptrn[1] = 0x03; /* by looking at this pattern */
cm->cm_byteptrn[2] = 0x07;
cm->cm_byteptrn[3] = 0x0F;
cm->cm_wordptrn[0] = 0x0103;
cm->cm_wordptrn[1] = 0x070F;
cm->cm_lwordptrn = 0x0103070F;
for (i=0; i<20; i++) cm->cm_rsrvd[i] = 0;
cm->cm_mba = 0xFFFFFFFF;
cm->cm_nproc = 0xFF;
cm->cm_nmbox = 0xFF;
cm->cm_nmcast = 0xFF;
cm->cm_nhost = 1;
cm->cm_h2xba = P_UNIADDR(xs->xs_ubaddr);
cm->cm_h2xhdr = H2XHDR_OFFSET(unit);
cm->cm_h2xtyp = 0; /* should never wait for rqst buffer */
cm->cm_x2hba = cm->cm_h2xba;
cm->cm_x2hhdr = X2HHDR_OFFSET(unit);
cm->cm_x2htyp = itype; /* 0 for none, 4 for vectored */
for (i=0; (addr != ex_cvecs[i].xc_csraddr); i++)
#ifdef DEBUG
if (i >= NEX)
panic("ex: matching csr address not found");
#endif
;
cm->cm_x2haddr = ex_cvecs[i].xc_cvec; /* stashed here by exprobe */
/*
* Set up message queues and headers.
* First the request queue.
*/
for (bp = &xs->xs_h2xent[0]; bp < &xs->xs_h2xent[NH2X]; bp++) {
bp->mb_link = (u_short)((char *)(bp+1)-INCORE_BASE(xs));
bp->mb_rsrv = 0;
bp->mb_length = MBDATALEN;
bp->mb_status = MH_HOST;
bp->mb_next = bp+1;
}
xs->xs_h2xhdr =
xs->xs_h2xent[NH2X-1].mb_link = (u_short)H2XENT_OFFSET(unit);
xs->xs_h2xnext = xs->xs_h2xent[NH2X-1].mb_next = xs->xs_h2xent;
/* Now the reply queue. */
for (bp = &xs->xs_x2hent[0]; bp < &xs->xs_x2hent[NX2H]; bp++) {
bp->mb_link = (u_short)((char *)(bp+1)-INCORE_BASE(xs));
bp->mb_rsrv = 0;
bp->mb_length = MBDATALEN;
bp->mb_status = MH_EXOS;
bp->mb_next = bp+1;
}
xs->xs_x2hhdr =
xs->xs_x2hent[NX2H-1].mb_link = (u_short)X2HENT_OFFSET(unit);
xs->xs_x2hnext = xs->xs_x2hent[NX2H-1].mb_next = xs->xs_x2hent;
/*
* Write config msg address to EXOS and wait for
* configuration to complete (guaranteed response
* within 2 seconds).
*/
shiftreg = (u_long)0x0000FFFF;
for (i = 0; i < 8; i++) {
if (i == 4)
shiftreg = P_UNIADDR(xs->xs_ubaddr) + CM_OFFSET(unit);
while (addr->xd_portb & EX_UNREADY)
;
addr->xd_portb = (u_char)(shiftreg & 0xFF);
shiftreg >>= 8;
}
for (i = 1000000; (cm->cm_cc == 0xFF) && i; --i);
if (cm->cm_cc)
printf("ex%d: configuration failed; cc = %x\n",
unit, cm->cm_cc);
}
/*
* Start or re-start output on interface.
* Get another datagram to send off of the interface queue,
* and map it to the interface before starting the output.
* This routine is called by exinit(), ether_output(), and excdint().
* In all cases, interrupts by EXOS are disabled.
*/
exstart(ifp)
struct ifnet *ifp;
{
int unit = ifp->if_unit;
struct uba_device *ui = exinfo[unit];
register struct ex_softc *xs = &ex_softc[unit];
register struct exdevice *addr = (struct exdevice *)ui->ui_addr;
register struct ex_msg *bp;
struct mbuf *m;
int len;
#ifdef DEBUG
if (xs->xs_if.if_flags & IFF_OACTIVE)
panic("exstart(): xmit still pending");
#endif
IF_DEQUEUE(&xs->xs_if.if_snd, m);
if (m == 0)
return (0);
len = if_wubaput(&xs->xs_ifuba, m);
if (len - sizeof(struct ether_header) < ETHERMIN)
len = ETHERMIN + sizeof(struct ether_header);
/*
* Place a transmit request.
*/
bp = exgetcbuf(xs);
bp->mb_rqst = LLRTRANSMIT;
bp->mb_et.et_nblock = 1;
bp->mb_et.et_blks[0].bb_len = (u_short)len;
*(u_long *)bp->mb_et.et_blks[0].bb_addr =
UNIADDR(xs->xs_ifuba.ifu_w.ifrw_info);
xs->xs_if.if_flags |= IFF_OACTIVE;
bp->mb_status |= MH_EXOS;
addr->xd_portb = EX_NTRUPT;
return (0);
}
/*
* Command done interrupt.
*/
excdint(unit)
int unit;
{
register struct ex_softc *xs = &ex_softc[unit];
register struct ex_msg *bp = xs->xs_x2hnext;
struct uba_device *ui = exinfo[unit];
struct exdevice *addr = (struct exdevice *)ui->ui_addr;
while ((bp->mb_status & MH_OWNER) == MH_HOST) {
switch (bp->mb_rqst) {
case LLRECEIVE:
exrecv(unit, bp);
exhangrcv(unit);
break;
case LLRTRANSMIT:
#ifdef DEBUG
if ((xs->xs_if.if_flags & IFF_OACTIVE) == 0)
panic("exxmit: no xmit pending");
#endif
xs->xs_if.if_flags &= ~IFF_OACTIVE;
xs->xs_if.if_opackets++;
if (bp->mb_rply == LL_OK) {
;
} else if (bp->mb_rply & LLXM_1RTRY) {
xs->xs_if.if_collisions++;
} else if (bp->mb_rply & LLXM_RTRYS) {
xs->xs_if.if_collisions += 2; /* guess */
} else if (bp->mb_rply & LLXM_ERROR) {
xs->xs_if.if_oerrors++;
log(LOG_ERR, "ex%d: transmit error=%b\n",
unit, bp->mb_rply, XMIT_BITS);
}
if (xs->xs_ifuba.ifu_xtofree) {
m_freem(xs->xs_ifuba.ifu_xtofree);
xs->xs_ifuba.ifu_xtofree = 0;
}
(void) exstart(&xs->xs_if);
break;
case LLNET_STSTCS:
xs->xs_if.if_ierrors = xs->xs_xsa.sa_crc;
xs->xs_flags &= ~EX_STATPENDING;
break;
case LLNET_ADDRS:
case LLNET_RECV:
break;
#ifdef DEBUG
default:
panic("ex%d: unknown reply");
#endif
} /* end of switch */
bp->mb_length = MBDATALEN;
bp->mb_status |= MH_EXOS; /* free up buffer */
addr->xd_portb = EX_NTRUPT; /* tell EXOS about it */
bp = xs->xs_x2hnext = xs->xs_x2hnext->mb_next;
}
}
/*
* Get a request buffer, fill in standard values, advance pointer.
*/
struct ex_msg *
exgetcbuf(xs)
struct ex_softc *xs;
{
register struct ex_msg *bp = xs->xs_h2xnext;
#ifdef DEBUG
if ((bp->mb_status & MH_OWNER) == MH_EXOS)
panic("exgetcbuf(): EXOS owns message buffer");
#endif
bp->mb_1rsrv = 0;
bp->mb_length = MBDATALEN;
xs->xs_h2xnext = xs->xs_h2xnext->mb_next;
return bp;
}
/*
* Process Ethernet receive completion:
* If input error just drop packet.
* Otherwise purge input buffered data path and examine
* packet to determine type. If can't determine length
* from type, then have to drop packet. Otherwise decapsulate
* packet based on type and pass to type-specific higher-level
* input routine.
*/
exrecv(unit, bp)
int unit;
register struct ex_msg *bp;
{
register struct ex_softc *xs = &ex_softc[unit];
register struct ether_header *eh;
struct mbuf *m;
register int len, off, resid;
register struct ifqueue *inq;
int s;
xs->xs_if.if_ipackets++;
len = bp->mb_er.er_blks[0].bb_len - sizeof(struct ether_header) - 4;
if (bp->mb_rply != LL_OK) {
xs->xs_if.if_ierrors++;
log(LOG_ERR, "ex%d: receive error=%b\n",
unit, bp->mb_rply, RECV_BITS);
return;
}
eh = (struct ether_header *)(xs->xs_ifuba.ifu_r.ifrw_addr);
/*
* Deal with trailer protocol: if type is trailer
* get true type from first 16-bit word past data.
* Remember that type was trailer by setting off.
*/
eh->ether_type = ntohs((u_short)eh->ether_type);
#define exdataaddr(eh, off, type) ((type)(((caddr_t)((eh)+1)+(off))))
if (eh->ether_type >= ETHERTYPE_TRAIL &&
eh->ether_type < ETHERTYPE_TRAIL+ETHERTYPE_NTRAILER) {
off = (eh->ether_type - ETHERTYPE_TRAIL) * 512;
if (off >= ETHERMTU)
return; /* sanity */
eh->ether_type = ntohs(*exdataaddr(eh, off, u_short *));
resid = ntohs(*(exdataaddr(eh, off+2, u_short *)));
if (off + resid > len)
return; /* sanity */
len = off + resid;
} else
off = 0;
if (len == 0)
return;
/*
* Pull packet off interface. Off is nonzero if packet
* has trailing header; if_rubaget will then force this header
* information to be at the front, but we still have to drop
* the type and length which are at the front of any trailer data.
*/
m = if_rubaget(&xs->xs_ifuba, len, off, &xs->xs_if);
if (m == 0)
return;
ether_input(&xs->xs_if, eh, m);
}
/*
* Send receive request to EXOS.
* This routine is called by exinit and excdint,
* with interrupts disabled in both cases.
*/
exhangrcv(unit)
int unit;
{
register struct ex_softc *xs = &ex_softc[unit];
register struct ex_msg *bp = exgetcbuf(xs);
struct exdevice *addr = (struct exdevice *)exinfo[unit]->ui_addr;
bp->mb_rqst = LLRECEIVE;
bp->mb_er.er_nblock = 1;
bp->mb_er.er_blks[0].bb_len = EXMAXRBUF;
*(u_long *)bp->mb_er.er_blks[0].bb_addr =
UNIADDR(xs->xs_ifuba.ifu_r.ifrw_info);
bp->mb_status |= MH_EXOS;
addr->xd_portb = EX_NTRUPT;
}
/*
* Watchdog routine - place stats request to EXOS
* (This could be dispensed with, if you don't care
* about the if_ierrors count, or are willing to receive
* bad packets in order to derive it.)
*/
exwatch(unit)
int unit;
{
struct uba_device *ui = exinfo[unit];
struct exdevice *addr = (struct exdevice *)ui->ui_addr;
register struct ex_softc *xs = &ex_softc[unit];
register struct ex_msg *bp;
int s = splimp();
if (xs->xs_flags & EX_STATPENDING) goto exspnd;
bp = exgetcbuf(xs);
xs->xs_flags |= EX_STATPENDING;
bp->mb_rqst = LLNET_STSTCS;
bp->mb_ns.ns_mask = READ_OBJ;
bp->mb_ns.ns_rsrv = 0;
bp->mb_ns.ns_nobj = 8; /* read all 8 stats objects */
bp->mb_ns.ns_xobj = 0; /* starting with the 1st one */
bp->mb_ns.ns_bufp = P_UNIADDR(xs->xs_ubaddr) + SA_OFFSET(unit);
bp->mb_status |= MH_EXOS;
addr->xd_portb = EX_NTRUPT;
exspnd:
splx(s);
xs->xs_if.if_timer = EXWATCHINTVL;
}
/*
* Process an ioctl request.
*/
exioctl(ifp, cmd, data)
register struct ifnet *ifp;
int cmd;
caddr_t data;
{
register struct ifaddr *ifa = (struct ifaddr *)data;
register struct ex_softc *xs = &ex_softc[ifp->if_unit];
int s = splimp(), error = 0;
switch (cmd) {
case SIOCSIFADDR:
ifp->if_flags |= IFF_UP;
exinit(ifp->if_unit);
switch (ifa->ifa_addr->sa_family) {
#ifdef INET
case AF_INET:
((struct arpcom *)ifp)->ac_ipaddr =
IA_SIN(ifa)->sin_addr;
arpwhohas((struct arpcom *)ifp, &IA_SIN(ifa)->sin_addr);
break;
#endif
#ifdef NS
case AF_NS:
{
register struct ns_addr *ina = &(IA_SNS(ifa)->sns_addr);
if (ns_nullhost(*ina))
ina->x_host = *(union ns_host *)(xs->xs_addr);
else
ex_setaddr(ina->x_host.c_host,ifp->if_unit);
break;
}
#endif
}
break;
case SIOCSIFFLAGS:
if ((ifp->if_flags & IFF_UP) == 0 &&
xs->xs_flags & EX_RUNNING) {
((struct exdevice *)
(exinfo[ifp->if_unit]->ui_addr))->xd_porta = EX_RESET;
xs->xs_flags &= ~EX_RUNNING;
} else if (ifp->if_flags & IFF_UP &&
(xs->xs_flags & EX_RUNNING) == 0)
exinit(ifp->if_unit);
break;
default:
error = EINVAL;
}
splx(s);
return (error);
}
/*
* set ethernet address for unit
*/
ex_setaddr(physaddr, unit)
u_char *physaddr;
int unit;
{
register struct ex_softc *xs = &ex_softc[unit];
if (physaddr) {
xs->xs_flags |= EX_SETADDR;
bcopy((caddr_t)physaddr, (caddr_t)xs->xs_addr, 6);
}
ex_setmulti((u_char *)xs->xs_addr, unit, PHYSSLOT);
}
/*
* enable multicast reception on a particular address.
*/
ex_setmulti(linkaddr, unit, slot)
u_char *linkaddr;
int unit;
{
register struct ex_softc *xs = &ex_softc[unit];
struct uba_device *ui = exinfo[unit];
register struct exdevice *addr= (struct exdevice *)ui->ui_addr;
register struct ex_msg *bp;
if (! (xs->xs_flags & EX_RUNNING))
return;
bp = exgetcbuf(xs);
bp->mb_rqst = LLNET_ADDRS;
bp->mb_na.na_mask = READ_OBJ|WRITE_OBJ;
bp->mb_na.na_slot = slot;
bcopy((caddr_t)linkaddr, (caddr_t)bp->mb_na.na_addrs, 6);
bp->mb_status |= MH_EXOS;
addr->xd_portb = EX_NTRUPT;
bp = xs->xs_x2hnext;
while ((bp->mb_status & MH_OWNER) == MH_EXOS) /* poll for reply */
;
#ifdef DEBUG
log(LOG_DEBUG, "ex%d: %s %s (slot %d)\n", unit,
(slot == PHYSSLOT ? "reset addr" : "add multicast"
ether_sprintf(bp->mb_na.na_addrs), slot);
#endif
/*
* Now, re-enable reception on slot.
*/
bp = exgetcbuf(xs);
bp->mb_rqst = LLNET_RECV;
bp->mb_nr.nr_mask = ENABLE_RCV|READ_OBJ|WRITE_OBJ;
bp->mb_nr.nr_slot = slot;
bp->mb_status |= MH_EXOS;
addr->xd_portb = EX_NTRUPT;
bp = xs->xs_x2hnext;
while ((bp->mb_status & MH_OWNER) == MH_EXOS) /* poll for reply */
;
}
#endif