4.3BSD-Tahoe/usr/src/man/man4/idp.4

Compare this file to the similar file:
Show the results in this format:

.\" Copyright (c) 1985 Regents of the University of California.
.\" All rights reserved.  The Berkeley software License Agreement
.\" specifies the terms and conditions for redistribution.
.\"
.\"	@(#)idp.4p	1.1 (Berkeley) 7/30/85
.\"
.TH IDP 4P "July 30, 1985"
.UC 6
.SH NAME
idp \- Xerox Internet Datagram Protocol
.SH SYNOPSIS
.B #include <sys/socket.h>
.br
.B #include <netns/ns.h>
.br
.B #include <netns/idp.h>
.PP
.B s = socket(AF_NS, SOCK_DGRAM, 0);
.SH DESCRIPTION
IDP is a simple, unreliable datagram protocol which is used
to support the SOCK_DGRAM abstraction for the Internet
protocol family.  IDP sockets are connectionless, and are
normally used with the
.I sendto 
and
.IR recvfrom 
calls, though the
.IR connect (2)
call may also be used to fix the destination for future
packets (in which case the 
.IR recv (2)
or
.IR read (2)
and 
.IR send (2)
or
.IR write(2)
system calls may be used).
.PP
Xerox protocols are built vertically on top of IDP.
Thus, IDP address formats are identical to those used by
SPP.
Note that the IDP port
space is the same as the SPP port space (i.e. a IDP port
may be \*(lqconnected\*(rq to a SPP port, with certain
options enabled below).
In addition broadcast packets may be sent
(assuming the underlying network supports
this) by using a reserved \*(lqbroadcast address\*(rq; this address
is network interface dependent.
.SH DIAGNOSTICS
A socket operation may fail with one of the following errors returned:
.TP 15
[EISCONN]
when trying to establish a connection on a socket which
already has one, or when trying to send a datagram with the destination
address specified and the socket is already connected;
.TP 15
[ENOTCONN]
when trying to send a datagram, but
no destination address is specified, and the socket hasn't been
connected;
.TP 15
[ENOBUFS]
when the system runs out of memory for
an internal data structure;
.TP 15
[EADDRINUSE]
when an attempt
is made to create a socket with a port which has already been
allocated;
.TP 15
[EADDRNOTAVAIL]
when an attempt is made to create a 
socket with a network address for which no network interface
exists.
.SH SOCKET OPTIONS
.TP 15
[SO_HEADERS_ON_INPUT]
When set, the first 30 bytes of any data returned from a read
or recv from will be the initial 30 bytes of the IDP packet,
as described by
.nf
struct idp {
	u_short		idp_sum;
	u_short		idp_len;
	u_char		idp_tc;
	u_char		idp_pt;
	struct ns_addr	idp_dna;
	struct ns_addr	idp_sna;
};
.fi
This allows the user to determine the packet type, and whether
the packet was a multi-cast packet or directed specifically at
the local host.
When requested, gives the current state of the option,
(NSP_RAWIN or 0).
.TP 15
[SO_HEADERS_ON_OUTPUT]
When set, the first 30 bytes of any data sent
will be the initial 30 bytes of the IDP packet.
This allows the user to determine the packet type, and whether
the packet should be multi-cast packet or directed specifically at
the local host.
You can also misrepresent the sender of the packet.
When requested, gives the current state of the option.
(NSP_RAWOUT or 0).
.TP 15
[SO_DEFAULT_HEADERS]
The user provides the kernel an IDP header, from which
it gleans the Packet Type.
When requested, the kernel will provide an IDP header, showing
the default packet type, and local and foreign addresses, if
connected.
.TP 15
[SO_ALL_PACKETS]
When set, this option defeats automatic processing of Error packets,
and Sequence Protocol packets.
.TP 15
[SO_SEQNO]
When requested, this returns a sequence number which is not likely
to be repeated until the machine crashes or a very long time has passed.
It is useful in constructing Packet Exchange Protocol packets.
.SH SEE ALSO
send(2),
recv(2),
intro(4N),
ns(4F)