4.3BSD-Tahoe/usr/man/cat1/adb.0
ADB(1) UNIX Programmer's Manual ADB(1)
NNAAMMEE
adb - debugger
SSYYNNOOPPSSIISS
aaddbb [--ww] [ --kk ] [ --IIdir ] [ objfil [ corfil ] ]
DDEESSCCRRIIPPTTIIOONN
_A_d_b is a general purpose debugging program. It may be used
to examine files and to provide a controlled environment for
the execution of UNIX programs.
_O_b_j_f_i_l is normally an executable program file, preferably
containing a symbol table; if not then the symbolic features
of _a_d_b cannot be used although the file can still be exam-
ined. The default for _o_b_j_f_i_l is aa..oouutt.. _C_o_r_f_i_l is assumed to
be a core image file produced after executing _o_b_j_f_i_l; the
default for _c_o_r_f_i_l is ccoorree..
Requests to _a_d_b are read from the standard input and
responses are to the standard output. If the --ww flag is
present then both _o_b_j_f_i_l and _c_o_r_f_i_l are created if necessary
and opened for reading and writing so that files can be
modified using _a_d_b.
The --kk option makes _a_d_b do UNIX kernel memory mapping; it
should be used when _c_o_r_e is a UNIX crash dump or /_d_e_v/_m_e_m.
The --II option specifies a directory where files to be read
with $< or $<< (see below) will be sought; the default is
/_u_s_r/_l_i_b/_a_d_b.
_A_d_b ignores QUIT; INTERRUPT causes return to the next _a_d_b
command.
In general requests to _a_d_b are of the form
[_a_d_d_r_e_s_s] [, _c_o_u_n_t] [_c_o_m_m_a_n_d] [;]
If _a_d_d_r_e_s_s is present then _d_o_t is set to _a_d_d_r_e_s_s. Initially
_d_o_t is set to 0. For most commands _c_o_u_n_t specifies how many
times the command will be executed. The default _c_o_u_n_t is 1.
_A_d_d_r_e_s_s and _c_o_u_n_t are expressions.
The interpretation of an address depends on the context it
is used in. If a subprocess is being debugged then
addresses are interpreted in the usual way in the address
space of the subprocess. If the operating system is being
debugged either post-mortem or using the special file
/_d_e_v/_m_e_m to interactive examine and/or modify memory the
maps are set to map the kernel virtual addresses which start
at 0x80000000 (on the VAX). ADDRESSES.
Printed 7/9/88 April 29, 1985 1
ADB(1) UNIX Programmer's Manual ADB(1)
EEXXPPRREESSSSIIOONNSS
.. The value of _d_o_t.
+ The value of _d_o_t incremented by the current incre-
ment.
^ The value of _d_o_t decremented by the current incre-
ment.
" The last _a_d_d_r_e_s_s typed.
_i_n_t_e_g_e_r
A number. The prefixes 0o and 0O ("zero oh") force
interpretation in octal radix; the prefixes 0t and 0T
force interpretation in decimal radix; the prefixes
0x and 0X force interpretation in hexadecimal radix.
Thus 0o20 = 0t16 = 0x10 = sixteen. If no prefix
appears, then the _d_e_f_a_u_l_t _r_a_d_i_x is used; see the $d
command. The default radix is initially hexadecimal.
The hexadecimal digits are 0123456789abcdefABCDEF
with the obvious values. Note that a hexadecimal
number whose most significant digit would otherwise
be an alphabetic character must have a 0x (or 0X)
prefix (or a leading zero if the default radix is
hexadecimal).
_i_n_t_e_g_e_r.._f_r_a_c_t_i_o_n
A 32 bit floating point number.
'_c_c_c_c' The ASCII value of up to 4 characters. \ may be used
to escape a '.
< _n_a_m_e The value of _n_a_m_e, which is either a variable name or
a register name. _A_d_b maintains a number of variables
(see VARIABLES) named by single letters or digits.
If _n_a_m_e is a register name then the value of the
register is obtained from the system header in _c_o_r_-
_f_i_l. The register names are those printed by the $r
command.
_s_y_m_b_o_l A _s_y_m_b_o_l is a sequence of upper or lower case
letters, underscores or digits, not starting with a
digit. The backslash character \\ may be used to
escape other characters. The value of the _s_y_m_b_o_l is
taken from the symbol table in _o_b_j_f_i_l. An initial _
will be prepended to _s_y_m_b_o_l if needed.
_ _s_y_m_b_o_l
In C, the `true name' of an external symbol begins
with _. It may be necessary to utter this name to
distinguish it from internal or hidden variables of a
program.
Printed 7/9/88 April 29, 1985 2
ADB(1) UNIX Programmer's Manual ADB(1)
_r_o_u_t_i_n_e.._n_a_m_e
The address of the variable _n_a_m_e in the specified C
routine. Both _r_o_u_t_i_n_e and _n_a_m_e are _s_y_m_b_o_l_s. If _n_a_m_e
is omitted the value is the address of the most
recently activated C stack frame corresponding to
_r_o_u_t_i_n_e. (This form is currently broken on the VAX;
local variables can be examined only with _d_b_x(1).)
(_e_x_p) The value of the expression _e_x_p.
MMoonnaaddiicc ooppeerraattoorrss
*_e_x_p The contents of the location addressed by _e_x_p in _c_o_r_-
_f_i_l.
@_e_x_p The contents of the location addressed by _e_x_p in
_o_b_j_f_i_l.
-_e_x_p Integer negation.
~_e_x_p Bitwise complement.
#_e_x_p Logical negation.
DDyyaaddiicc ooppeerraattoorrss are left associative and are less binding
than monadic operators.
_e_1+_e_2 Integer addition.
_e_1-_e_2 Integer subtraction.
_e_1*_e_2 Integer multiplication.
_e_1%_e_2 Integer division.
_e_1&_e_2 Bitwise conjunction.
_e_1|_e_2 Bitwise disjunction.
_e_1#_e_2 _E_1 rounded up to the next multiple of _e_2.
CCOOMMMMAANNDDSS
Most commands consist of a verb followed by a modifier or
list of modifiers. The following verbs are available. (The
commands `?' and `/' may be followed by `*'; see ADDRESSES
for further details.)
?_f Locations starting at _a_d_d_r_e_s_s in _o_b_j_f_i_l are printed
according to the format _f. _d_o_t is incremented by the
sum of the increments for each format letter (q.v.).
/_f Locations starting at _a_d_d_r_e_s_s in _c_o_r_f_i_l are printed
Printed 7/9/88 April 29, 1985 3
ADB(1) UNIX Programmer's Manual ADB(1)
according to the format _f and _d_o_t is incremented as for
`?'.
=_f The value of _a_d_d_r_e_s_s itself is printed in the styles
indicated by the format _f. (For ii format `?' is
printed for the parts of the instruction that reference
subsequent words.)
A _f_o_r_m_a_t consists of one or more characters that specify a
style of printing. Each format character may be preceded by
a decimal integer that is a repeat count for the format
character. While stepping through a format _d_o_t is incre-
mented by the amount given for each format letter. If no
format is given then the last format is used. The format
letters available are as follows.
oo 2 Print 2 bytes in octal. All octal numbers output
by _a_d_b are preceded by 0.
OO 4 Print 4 bytes in octal.
qq 2 Print in signed octal.
QQ 4 Print long signed octal.
dd 2 Print in decimal.
DD 4 Print long decimal.
xx 2 Print 2 bytes in hexadecimal.
XX 4 Print 4 bytes in hexadecimal.
uu 2 Print as an unsigned decimal number.
UU 4 Print long unsigned decimal.
ff 4 Print the 32 bit value as a floating point number.
FF 8 Print double floating point.
bb 1 Print the addressed byte in octal.
cc 1 Print the addressed character.
CC 1 Print the addressed character using the standard
escape convention where control characters are
printed as ^X and the delete character is printed
as ^?.
ss _n Print the addressed characters until a zero char-
acter is reached.
SS _n Print a string using the ^_X escape convention (see
CC above). _n is the length of the string including
its zero terminator.
YY 4 Print 4 bytes in date format (see _c_t_i_m_e(3)).
ii n Print as machine instructions. _n is the number of
bytes occupied by the instruction. This style of
printing causes variables 1 and 2 to be set to the
offset parts of the source and destination respec-
tively.
aa 0 Print the value of _d_o_t in symbolic form. Symbols
are checked to ensure that they have an appropri-
ate type as indicated below.
/ local or global data symbol
? local or global text symbol
Printed 7/9/88 April 29, 1985 4
ADB(1) UNIX Programmer's Manual ADB(1)
= local or global absolute symbol
pp 4 Print the addressed value in symbolic form using
the same rules for symbol lookup as aa.
tt 0 When preceded by an integer tabs to the next
appropriate tab stop. For example, 88tt moves to
the next 8-space tab stop.
rr 0 Print a space.
nn 0 Print a newline.
""......"" 0
Print the enclosed string.
^^ _D_o_t is decremented by the current increment.
Nothing is printed.
+ _D_o_t is incremented by 1. Nothing is printed.
- _D_o_t is decremented by 1. Nothing is printed.
newline
Repeat the previous command with a _c_o_u_n_t of 1.
[??//]ll _v_a_l_u_e _m_a_s_k
Words starting at _d_o_t are masked with _m_a_s_k and compared
with _v_a_l_u_e until a match is found. If LL is used then
the match is for 4 bytes at a time instead of 2. If no
match is found then _d_o_t is unchanged; otherwise _d_o_t is
set to the matched location. If _m_a_s_k is omitted then
-1 is used.
[??//]ww _v_a_l_u_e ...
Write the 2-byte _v_a_l_u_e into the addressed location. If
the command is WW, write 4 bytes. Odd addresses are not
allowed when writing to the subprocess address space.
[??//]mm _b_1 _e_1 _f_1[??//]
New values for (_b_1, _e_1, _f_1) are recorded. If less than
three expressions are given then the remaining map
parameters are left unchanged. If the `?' or `/' is
followed by `*' then the second segment (_b_2,_e_2,_f_2) of
the mapping is changed. If the list is terminated by
`?' or `/' then the file (_o_b_j_f_i_l or _c_o_r_f_i_l respec-
tively) is used for subsequent requests. (So that, for
example, `/m?' will cause `/' to refer to _o_b_j_f_i_l.)
>>_n_a_m_e
_D_o_t is assigned to the variable or register named.
!! A shell (/bin/sh) is called to read the rest of the
line following `!'.
$_m_o_d_i_f_i_e_r
Miscellaneous commands. The available _m_o_d_i_f_i_e_r_s are:
<<_f Read commands from the file _f. If this command is
Printed 7/9/88 April 29, 1985 5
ADB(1) UNIX Programmer's Manual ADB(1)
executed in a file, further commands in the file
are not seen. If _f is omitted, the current input
stream is terminated. If a _c_o_u_n_t is given, and is
zero, the command will be ignored. The value of
the count will be placed in variable _9 before the
first command in _f is executed.
<<<<_f Similar to << except it can be used in a file of
commands without causing the file to be closed.
Variable _9 is saved during the execution of this
command, and restored when it completes. There is
a (small) finite limit to the number of <<<< files
that can be open at once.
>>_f Append output to the file _f, which is created if
it does not exist. If _f is omitted, output is
returned to the terminal.
?? Print process id, the signal which caused stoppage
or termination, as well as the registers as $$rr.
This is the default if _m_o_d_i_f_i_e_r is omitted.
rr Print the general registers and the instruction
addressed by ppcc. _D_o_t is set to ppcc.
bb Print all breakpoints and their associated counts
and commands.
cc C stack backtrace. If _a_d_d_r_e_s_s is given then it is
taken as the address of the current frame instead
of the contents of the frame-pointer register. If
CC is used then the names and (32 bit) values of
all automatic and static variables are printed for
each active function. (broken on the VAX). If
_c_o_u_n_t is given then only the first _c_o_u_n_t frames
are printed.
dd Set the default radix to _a_d_d_r_e_s_s and report the
new value. Note that _a_d_d_r_e_s_s is interpreted in
the (old) current radix. Thus "10$d" never
changes the default radix. To make decimal the
default radix, use "0t10$d".
ee The names and values of external variables are
printed.
ww Set the page width for output to _a_d_d_r_e_s_s (default
80).
ss Set the limit for symbol matches to _a_d_d_r_e_s_s
(default 255).
oo All integers input are regarded as octal.
qq Exit from _a_d_b.
vv Print all non zero variables in octal.
mm Print the address map.
pp (_K_e_r_n_e_l _d_e_b_u_g_g_i_n_g) Change the current kernel
memory mapping to map the designated uusseerr ssttrruucc--
ttuurree to the address given by the symbol __u. The
_a_d_d_r_e_s_s argument is the address of the user's user
page table entries (on the VAX).
::_m_o_d_i_f_i_e_r
Printed 7/9/88 April 29, 1985 6
ADB(1) UNIX Programmer's Manual ADB(1)
Manage a subprocess. Available modifiers are:
bb_c Set breakpoint at _a_d_d_r_e_s_s. The breakpoint is exe-
cuted _c_o_u_n_t-1 times before causing a stop. Each
time the breakpoint is encountered the command _c
is executed. If this command is omitted or sets
_d_o_t to zero then the breakpoint causes a stop.
dd Delete breakpoint at _a_d_d_r_e_s_s.
rr Run _o_b_j_f_i_l as a subprocess. If _a_d_d_r_e_s_s is given
explicitly then the program is entered at this
point; otherwise the program is entered at its
standard entry point. _c_o_u_n_t specifies how many
breakpoints are to be ignored before stopping.
Arguments to the subprocess may be supplied on the
same line as the command. An argument starting
with < or > causes the standard input or output to
be established for the command.
cc_s The subprocess is continued with signal _s, see
_s_i_g_v_e_c(2). If _a_d_d_r_e_s_s is given then the subpro-
cess is continued at this address. If no signal
is specified then the signal that caused the sub-
process to stop is sent. Breakpoint skipping is
the same as for rr.
ss_s As for cc except that the subprocess is single
stepped _c_o_u_n_t times. If there is no current sub-
process then _o_b_j_f_i_l is run as a subprocess as for
rr. In this case no signal can be sent; the
remainder of the line is treated as arguments to
the subprocess.
kk The current subprocess, if any, is terminated.
VVAARRIIAABBLLEESS
_A_d_b provides a number of variables. Named variables are set
initially by _a_d_b but are not used subsequently. Numbered
variables are reserved for communication as follows.
0 The last value printed.
1 The last offset part of an instruction source.
2 The previous value of variable 1.
9 The count on the last $< or $<< command.
On entry the following are set from the system header in the
_c_o_r_f_i_l. If _c_o_r_f_i_l does not appear to be a ccoorree file then
these values are set from _o_b_j_f_i_l.
b The base address of the data segment.
d The data segment size.
Printed 7/9/88 April 29, 1985 7
ADB(1) UNIX Programmer's Manual ADB(1)
e The entry point.
m The `magic' number (0407, 0410 or 0413).
s The stack segment size.
t The text segment size.
AADDDDRREESSSSEESS
The address in a file associated with a written address is
determined by a mapping associated with that file. Each
mapping is represented by two triples (_b_1, _e_1, _f_1) and (_b_2,
_e_2, _f_2) and the _f_i_l_e _a_d_d_r_e_s_s corresponding to a written
_a_d_d_r_e_s_s is calculated as follows.
_b_1<__a_d_d_r_e_s_s<_e_1 => _f_i_l_e _a_d_d_r_e_s_s=_a_d_d_r_e_s_s+_f_1-_b_1, otherwise,
_b_2<__a_d_d_r_e_s_s<_e_2 => _f_i_l_e _a_d_d_r_e_s_s=_a_d_d_r_e_s_s+_f_2-_b_2,
otherwise, the requested _a_d_d_r_e_s_s is not legal. In some
cases (e.g. for programs with separated I and D space) the
two segments for a file may overlap. If a ?? or // is fol-
lowed by an ** then only the second triple is used.
The initial setting of both mappings is suitable for normal
aa..oouutt and ccoorree files. If either file is not of the kind
expected then, for that file, _b_1 is set to 0, _e_1 is set to
the maximum file size and _f_1 is set to 0; in this way the
whole file can be examined with no address translation.
FFIILLEESS
a.out
core
SSEEEE AALLSSOO
cc(1), dbx(1), ptrace(2), a.out(5), core(5)
DDIIAAGGNNOOSSTTIICCSS
`Adb' when there is no current command or format. Comments
about inaccessible files, syntax errors, abnormal termina-
tion of commands, etc. Exit status is 0, unless last com-
mand failed or returned nonzero status.
BBUUGGSS
Since no shell is invoked to interpret the arguments of the
::rr command, the customary wild-card and variable expansions
cannot occur.
Printed 7/9/88 April 29, 1985 8