4.3BSD-Tahoe/usr/man/cat1/indent.0

Compare this file to the similar file:
Show the results in this format:




INDENT(1)	    UNIX Programmer's Manual		INDENT(1)



NNAAMMEE
     indent - indent and format C program source

SSYYNNOOPPSSIISS
     iinnddeenntt  [ _i_n_p_u_t-_f_i_l_e [ _o_u_t_p_u_t-_f_i_l_e ] ] [ --bbaadd | --nnbbaadd ]
	    [ --bbaapp | --nnbbaapp ] [ --bbbbbb | --nnbbbbbb ] [ --bbcc | --nnbbcc ]
	    [ --bbll | --bbrr ] [ --cc_n ] [ --ccdd_n ] [ --ccddbb | --nnccddbb ]
	    [ --ccee | --nnccee ] [ --ccii_n ] [ --ccllii_n ] [ --dd_n ] [ --ddii_n ]
	    [ --ddjj | --nnddjj ] [ --eeii | --nneeii ] [ --ffcc11 | --nnffcc11 ]
	    [ --ii_n ] [ --iipp | --nniipp ] [ --ll_n ] [ --llcc_n ]
	    [ --llpp | --nnllpp ] [ --nnpprroo ] [ --ppccss | --nnppccss ]
	    [ --ppss | --nnppss ] [ --ppssll | --nnppssll ] [ --sscc | --nnsscc ]
	    [ --ssoobb | --nnssoobb ] [ --sstt ] [ --ttrrooffff ] [ --vv | --nnvv ]

DDEESSCCRRIIPPTTIIOONN
     _I_n_d_e_n_t is a CC program formatter.  It reformats the CC program
     in the _i_n_p_u_t-_f_i_l_e according to the switches.  The switches
     which can be specified are described below. They may appear
     before or after the file names.

     NNOOTTEE: If you only specify an _i_n_p_u_t-_f_i_l_e, the formatting is
     done `in-place', that is, the formatted file is written back
     into _i_n_p_u_t-_f_i_l_e and a backup copy of _i_n_p_u_t-_f_i_l_e is written
     in the current directory.	If _i_n_p_u_t-_f_i_l_e is named
     `/blah/blah/file', the backup file is named file._B_A_K.

     If _o_u_t_p_u_t-_f_i_l_e is specified, _i_n_d_e_n_t checks to make sure it
     is different from _i_n_p_u_t-_f_i_l_e.

OOPPTTIIOONNSS
     The options listed below control the formatting style
     imposed by _i_n_d_e_n_t.

     --bbaadd,--nnbbaadd     If --bbaadd is specified, a blank line is forced
		    after every block of declarations.	Default:
		    --nnbbaadd.

     --bbaapp,--nnbbaapp     If --bbaapp is specified, a blank line is forced
		    after every procedure body.  Default: --nnbbaapp..

     --bbbbbb,--nnbbbbbb     If --bbbbbb is specified, a blank line is forced
		    before every block comment.  Default: --nnbbbbbb..

     --bbcc,--nnbbcc	    If --bbcc is specified, then a newline is forced
		    after each comma in a declaration. --nnbbcc turns
		    off this option.  The default is --nnbbcc.

     --bbrr,--bbll	    Specifying --bbll lines up compound statements
		    like this:
			if (...)
			{
			    code



Printed 7/9/88	       September 10, 1985			1






INDENT(1)	    UNIX Programmer's Manual		INDENT(1)



			}
		    Specifying --bbrr (the default) makes them look
		    like this:
			if (...) {
			    code
			}

     --cc_n	    The column in which comments on code start.
		    The default is 33.

     --ccdd_n	    The column in which comments on declarations
		    start.  The default is for these comments to
		    start in the same column as those on code.

     --ccddbb,--nnccddbb     Enables (disables) the placement of comment
		    delimiters on blank lines.	With this option
		    enabled, comments look like this:
			 /*
			  * this is a comment
			  */
		    Rather than like this:
			 /* this is a comment */
		    This only affects block comments, not com-
		    ments to the right of code. The default is
		    --ccddbb.

     --ccee,--nnccee	    Enables (disables) forcing `else's to cuddle
		    up to the immediately preceding `}'.  The
		    default is --ccee.

     --ccii_n	    Sets the continuation indent to be _n.  Con-
		    tinuation lines will be indented that far
		    from the beginning of the first line of the
		    statement.	Parenthesized expressions have
		    extra indentation added to indicate the nest-
		    ing, unless --llpp is in effect.  --ccii defaults
		    to the same value as --ii.

     --ccllii_n	    Causes case labels to be indented _n tab stops
		    to the right of the containing sswwiittcchh state-
		    ment.  --ccllii00..55 causes case labels to be
		    indented half a tab stop.  The default is
		    --ccllii00.  (This is the only option that takes a
		    fractional argument.)

     --dd_n	    Controls the placement of comments which are
		    not to the right of code.  Specifying --dd11
		    means that such comments are placed one
		    indentation level to the left of code.  The
		    default --dd00 lines up these comments with the
		    code.  See the section on comment indentation
		    below.



Printed 7/9/88	       September 10, 1985			2






INDENT(1)	    UNIX Programmer's Manual		INDENT(1)



     --ddii_n	    Specifies the indentation, in character posi-
		    tions, from a declaration keyword to the fol-
		    lowing identifier.	The default is --ddii1166.

     --ddjj,--nnddjj	    --ddjj left justifies declarations.  --nnddjj
		    indents declarations the same as code.  The
		    default is --nnddjj.

     --eeii,--nneeii	    Enables (disables) special eellssee--iiff process-
		    ing.  If enabled, iiffs following eellssees will
		    have the same indentation as the preceding iiff
		    statement.	The default is --eeii.

     --ffcc11,--nnffcc11     Enables (disables) the formatting of comments
		    that start in column 1.  Often, comments
		    whose leading `/' is in column 1 have been
		    carefully hand formatted by the programmer.
		    In such cases, --nnffcc11 should be used.  The
		    default is --ffcc11.

     --ii_n	    The number of spaces for one indentation
		    level.  The default is 8.

     --iipp,--nniipp	    Enables (disables) the indentation of parame-
		    ter declarations from the left margin.  The
		    default is --iipp.

     --ll_n	    Maximum length of an output line.  The
		    default is 78.

     --llpp,--nnllpp	    Lines up code surrounded by parenthesis in
		    continuation lines.  If a line has a left
		    paren which is not closed on that line, then
		    continuation lines will be lined up to start
		    at the character position just after the left
		    paren.  For example, here is how a piece of
		    continued code looks with --nnllpp in effect:
			p1 = first_procedure(second_procedure(p2, p3),
			    third_procedure(p4, p5));
		    With --llpp in effect (the default) the code
		    looks somewhat clearer:
			p1 = first_procedure(second_procedure(p2, p3),
					     third_procedure(p4, p5));
		    Inserting two more newlines we get:
			p1 = first_procedure(second_procedure(p2,
							      p3),
					     third_procedure(p4,
							     p5));

     --nnpprroo	    Causes the profile files, `./.indent.pro' and
		    `~/.indent.pro', to be ignored.




Printed 7/9/88	       September 10, 1985			3






INDENT(1)	    UNIX Programmer's Manual		INDENT(1)



     --ppccss,--nnppccss     If true (--ppccss) all procedure calls will have
		    a space inserted between the name and the
		    `('.  The default is --nnppccss.

     --ppss,--nnppss	    If true (--ppss) the pointer following operator
		    `->' will be surrounded by spaces on either
		    side.  The default is --nnppss.

     --ppssll,--nnppssll     If true (--ppssll) the names of procedures being
		    defined are placed in column 1 - their types,
		    if any, will be left on the previous lines.
		    The default is --ppssll.

     --sscc,--nnsscc	    Enables (disables) the placement of asterisks
		    (`*'s) at the left edge of all comments.  The
		    default is --sscc.

     --ssoobb,--nnssoobb     If --ssoobb is specified, indent will swallow
		    optional blank lines.  You can use this to
		    get rid of blank lines after declarations.
		    Default: --nnssoobb.

     --sstt	    Causes iinnddeenntt to take its input from stdin,
		    and put its output to stdout.

     --TT_t_y_p_e_n_a_m_e     Adds _t_y_p_e_n_a_m_e to the list of type keywords.
		    Names accumulate: --TT can be specified more
		    than once.	You need to specify all the
		    typenames that appear in your program that
		    are defined by ttyyppeeddeeffs - nothing will be
		    harmed if you miss a few, but the program
		    won't be formatted as nicely as it should.
		    This sounds like a painful thing to have to
		    do, but it's really a symptom of a problem in
		    C: ttyyppeeddeeff causes a syntactic change in the
		    language and _i_n_d_e_n_t can't find all ttyyppeeddeeffs.

     --ttrrooffff	    Causes iinnddeenntt to format the program for pro-
		    cessing by troff.  It will produce a fancy
		    listing in much the same spirit as vvggrriinndd.
		    If the output file is not specified, the
		    default is standard output, rather than for-
		    matting in place.

     --vv,--nnvv	    --vv turns on `verbose' mode; --nnvv turns it off.
		    When in verbose mode, _i_n_d_e_n_t reports when it
		    splits one line of input into two or more
		    lines of output, and gives some size statis-
		    tics at completion. The default is --nnvv.

FFUURRTTHHEERR DDEESSCCRRIIPPTTIIOONN




Printed 7/9/88	       September 10, 1985			4






INDENT(1)	    UNIX Programmer's Manual		INDENT(1)



     You may set up your own `profile' of defaults to _i_n_d_e_n_t by
     creating a file called .._i_n_d_e_n_t.._p_r_o in either your login
     directory and/or the current directory and including what-
     ever switches you like.  Switches in `.indent.pro' in the
     current directory override those in your login directory
     (with the exception of --TT type definitions, which just accu-
     mulate).  If _i_n_d_e_n_t is run and a profile file exists, then
     it is read to set up the program's defaults.  The switches
     should be separated by spaces, tabs or newlines.  Switches
     on the command line, however, override profile switches.

     CCoommmmeennttss

     `_B_o_x' _c_o_m_m_e_n_t_s.  _I_n_d_e_n_t assumes that any comment with a dash
     or star immediately after the start of comment (that is,
     `/*-' or `/**') is a comment surrounded by a box of stars.
     Each line of such a comment is left unchanged, except that
     its indentation may be adjusted to account for the change in
     indentation of the first line of the comment.

     _S_t_r_a_i_g_h_t _t_e_x_t.  All other comments are treated as straight
     text.  _I_n_d_e_n_t fits as many words (separated by blanks, tabs,
     or newlines) on a line as possible.  Blank lines break para-
     graphs.

     CCoommmmeenntt iinnddeennttaattiioonn

     If a comment is on a line with code it is started in the
     `comment column', which is set by the --cc_n command line
     parameter.  Otherwise, the comment is started at _n indenta-
     tion levels less than where code is currently being placed,
     where _n is specified by the --dd_n command line parameter.  If
     the code on a line extends past the comment column, the com-
     ment starts further to the right, and the right margin may
     be automatically extended in extreme cases.

     PPrreepprroocceessssoorr lliinneess

     In general, _i_n_d_e_n_t leaves preprocessor lines alone.  The
     only reformatting that it will do is to straighten up trail-
     ing comments.  It leaves embedded comments alone.	Condi-
     tional compilation (##iiffddeeff......##eennddiiff) is recognized and
     _i_n_d_e_n_t attempts to correctly compensate for the syntactic
     peculiarities introduced.

     CC ssyynnttaaxx

     _I_n_d_e_n_t understands a substantial amount about the syntax of
     C, but it has a `forgiving' parser.  It attempts to cope
     with the usual sorts of incomplete and misformed syntax.  In
     particular, the use of macros like:
	     #define forever for(;;)



Printed 7/9/88	       September 10, 1985			5






INDENT(1)	    UNIX Programmer's Manual		INDENT(1)



     is handled properly.

FFIILLEESS
     ./.indent.pro  profile file
     ~/.indent.pro  profile file

BBUUGGSS
     _I_n_d_e_n_t has even more switches than _l_s.

     A common mistake that often causes grief is typing:
	 indent *.c
     to the shell in an attempt to indent all the CC programs in a
     directory.  This is probably a bug, not a feature.










































Printed 7/9/88	       September 10, 1985			6