4.3BSD-UWisc/include/vaxuba/qvreg.h

/*
 * RCS Info	
 *	$Header: qvreg.h,v 3.1 86/10/22 14:06:54 tadl Exp $
 *	$Locker:  $
 */
/* @(#)qvreg.h	1.3 (ULTRIX) 8/21/85 */
/*
 * QVSS definitions.
 */
struct qvdevice {
	unsigned short	qv_csr;		/* csr				*/
	unsigned short	qv_xcur;	/* cursor x-position		*/
	unsigned short	qv_mouse;	/* mouse position		*/
	unsigned short	qv_spare1;
	unsigned short	qv_crtaddr;	/* crt controller address reg	*/
	unsigned short	qv_crtdata;	/* crt controller data register	*/
	unsigned short	qv_intdata;	/* int controller data register	*/
	unsigned short	qv_intcsr;	/* int controller command/status*/
	unsigned short	qv_dummy[8];
	unsigned short	qv_uartmode;	/* uart mode			*/
	unsigned short	qv_uartstatus;	/* uart status			*/
	unsigned short	qv_uartcmd;	/* uart command			*/
	unsigned short	qv_uartdata;	/* uart data			*/
	unsigned short	qv_spare2;
	unsigned short	qv_uartintstatus; /* uart interrupt status	*/
};


/*
 * csr bit definations
 */

#define	QV_19INCH	0x1
#define QV_VIDEO_ENA	0x4
#define QV_CUR_MODE	0x8
#define QV_VIDEO_LP	0x10
#define QV_TEST_BIT	0x20
#define QV_INT_ENABLE	0x40
#define QV_CURSOR_ON	0x80
#define QV_MOUSE_ANY	0x700
#define QV_MOUSE_A	0x100
#define QV_MOUSE_B	0x200
#define QV_MOUSE_C	0x400
#define QV_MEM_BANK	0x7800

/*
 * Lk201 keyboard 
 */

#define LK_UPDOWN 	0x86		/* bits for setting lk201 modes */
#define LK_AUTODOWN 	0x82
#define LK_DOWN 	0x80
#define LK_DEFAULTS 	0xd3		/* reset (some) default settings */
#define LK_AR_ENABLE 	0xe3		/* global auto repeat enable */
#define LK_CL_ENABLE 	0x1b		/* keyclick enable */
#define LK_KBD_ENABLE 	0x8b		/* keyboard enable */
#define LK_BELL_ENABLE 	0x23		/* the bell */
#define LK_LED_ENABLE 	0x13		/* light led */
#define LK_LED_DISABLE 	0x11		/* turn off led */
#define LK_RING_BELL 	0xa7		/* ring keyboard bell */
#define LED_1 		0x81		/* led bits */
#define LED_2 		0x82
#define LED_3 		0x84
#define LED_4 		0x88
#define LED_ALL 	0x8f
#define LK_KDOWN_ERROR	0x3d		/* key down on powerup error */
#define LK_POWER_ERROR 	0x3e		/* keyboard failure on powerup test */
#define LK_OUTPUT_ERROR	0xb5		/* keystrokes lost during inhibit */
#define LK_INPUT_ERROR 	0xb6		/* garbage command to keyboard */
#define LK_LOWEST	0x56		/* lowest significant keycode */
#define LK_DIV6_START	0xad		/* start of div 6 */
#define LK_DIV5_END	0xb2		/* end of div 5 */

/*
 * Keycodes for special keys and functions
 */

#define SHIFT	0xae
#define LOCK	0xb0
#define REPEAT	0xb4
#define CNTRL	0xaf
#define ALLUP	0xb3