4.3BSD-UWisc/man/man0/tocx8

XNSrouted(8c) XNSrouted: NS Routing Information Protocol daemon.
ac(8) ac: login accounting.
adduser(8) adduser: procedure for adding new users.
arff(8v) arff, flcopy: archiver and copier for floppy.
arp(8c) arp: address resolution display and control.
bad144(8) bad144: read/write dec standard 144 bad sector information.
badsect(8) badsect: create files to contain bad sectors.
bugfiler(8) bugfiler: file bug reports in folders automatically.
catman(8) catman: create the cat files for the manual.
chown(8) chown: change owner.
clri(8) clri: clear i-node.
comsat(8c) comsat: biff server.
config(8) config: build system configuration files.
crash(8v) crash: what happens when the system crashes.
cron(8) cron: clock daemon.
dcheck(8) dcheck: file system directory consistency check.
diskpart(8) diskpart: calculate default disk partition sizes.
dmesg(8) dmesg: collect system diagnostic messages to form error log.
drtest(8) drtest: standalone disk test program.
dump(8) dump: incremental file system dump.
dumpfs(8) dumpfs: dump file system information.
edquota(8) edquota: edit user quotas.
fastboot(8) fastboot, fasthalt: reboot/halt the system without checking the disks.
fingerd(8c) fingerd: remote user information server.
format(8v) format: how to format disk packs.
fsck(8) fsck: file system consistency check and interactive repair.
ftpd(8c) ftpd: DARPA Internet File Transfer Protocol server.
gettable(8c) gettable: get NIC format host tables from a host.
getty(8) getty: set terminal mode.
halt(8) halt: stop the processor.
htable(8) htable: convert NIC standard format host tables.
icheck(8) icheck: file system storage consistency check.
ifconfig(8c) ifconfig: configure network interface parameters.
implog(8c) implog: IMP log interpreter.
implogd(8c) implogd: IMP logger process.
inetd(8) inetd: internet ``super\-server''.
init(8) init: process control initialization.
intro(8) intro: introduction to system maintenance and operation commands.
kgmon(8) kgmon: generate a dump of the operating system's profile buffers.
lpc(8) lpc: line printer control program.
lpd(8) lpd: line printer daemon.
makedev(8) makedev: make system special files.
makekey(8) makekey: generate encryption key.
mkfs(8) mkfs: construct a file system.
mkhosts(8) mkhosts: generate hashed host table.
mklost+found(8) mklost+found: make a lost+found directory for fsck.
mknod(8) mknod: build special file.
mkpasswd(8) mkpasswd: generate hashed password table.
mkproto(8) mkproto: construct a prototype file system.
mount(8) mount, umount: mount and dismount file system.
named(8) named: Internet domain name server.
ncheck(8) ncheck: generate names from i-numbers.
newfs(8) newfs: construct a new file system.
pac(8) pac: printer/plotter accounting information.
ping(8) ping: send ICMP ECHO_REQUEST packets to network hosts.
pstat(8) pstat: print system facts.
quot(8) quot: summarize file system ownership.
quotacheck(8) quotacheck: file system quota consistency checker.
quotaon(8) quotaon, quotaoff: turn file system quotas on and off.
rc(8) rc: command script for auto-reboot and daemons.
rdump(8c) rdump: file system dump across the network.
reboot(8) reboot: UNIX bootstrapping procedures.
renice(8) renice: alter priority of running processes.
repquota(8) repquota: summarize quotas for a file system.
restore(8) restore: incremental file system restore.
rexecd(8c) rexecd: remote execution server.
rlogind(8c) rlogind: remote login server.
rmt(8c) rmt: remote magtape protocol module.
route(8c) route: manually manipulate the routing tables.
routed(8c) routed: network routing daemon.
rrestore(8c) rrestore: restore a file system dump across the network.
rshd(8c) rshd: remote shell server.
rwhod(8c) rwhod: system status server.
rxformat(8v) rxformat: format floppy disks.
sa(8) sa, accton: system accounting.
savecore(8) savecore: save a core dump of the operating system.
sendmail(8) sendmail: send mail over the internet.
shutdown(8) shutdown: close down the system at a given time.
slattach(8c) slattach: attach serial lines as network interfaces.
sticky(8) sticky: persistent text and append-only directories.
swapon(8) swapon: specify additional device for paging and swapping.
sync(8) sync: update the super block.
syslogd(8) syslogd: log systems messages.
talkd(8c) talkd: remote user communication server.
telnetd(8c) telnetd: DARPA TELNET protocol server.
tftpd(8c) tftpd: DARPA Trivial File Transfer Protocol server.
timed(8) timed: time server daemon.
timedc(8) timedc: timed control program.
trpt(8c) trpt: transliterate protocol trace.
trsp(8c) trsp: transliterate sequenced packet protocol trace.
tunefs(8) tunefs: tune up an existing file system.
update(8) update: periodically update the super block.
uucico(8c) uucico, uucpd: transfer files queued by uucp or uux.
uuclean(8c) uuclean: uucp spool directory clean-up.
uupoll(8c) uupoll: poll a remote UUCP site.
uusnap(8c) uusnap: show snapshot of the UUCP system.
uuxqt(8c) uuxqt: UUCP execution file interpreter.
vipw(8) vipw: edit the password file.