/* Simple built-in editing commands. Copyright (C) 1985 Richard M. Stallman. This file is part of GNU Emacs. GNU Emacs is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY. No author or distributor accepts responsibility to anyone for the consequences of using it or for whether it serves any particular purpose or works at all, unless he says so in writing. Refer to the GNU Emacs General Public License for full details. Everyone is granted permission to copy, modify and redistribute GNU Emacs, but only under the conditions described in the GNU Emacs General Public License. A copy of this license is supposed to have been given to you along with GNU Emacs so you can know your rights and responsibilities. It should be in a file named COPYING. Among other things, the copyright notice and this notice must be preserved on all copies. */ #include "config.h" #include "lisp.h" #include "commands.h" #include "buffer.h" #include "syntax.h" Lisp_Object Qkill_forward_chars, Qkill_backward_chars, Vblink_paren_hook; DEFUN ("forward-char", Fforward_char, Sforward_char, 0, 1, "p", "Move point right ARG characters (left if ARG negative).\n\ On reaching end of buffer, stop and signal error.") (n) Lisp_Object n; { if (NULL (n)) XFASTINT (n) = 1; else CHECK_NUMBER (n, 0); SetPoint (point + XINT (n)); if (point < FirstCharacter) { SetPoint (FirstCharacter); Fsignal (Qbeginning_of_buffer, Qnil); } if (point > NumCharacters + 1) { SetPoint (NumCharacters + 1); Fsignal (Qend_of_buffer, Qnil); } return Qnil; } DEFUN ("backward-char", Fbackward_char, Sbackward_char, 0, 1, "p", "Move point left ARG characters (right if ARG negative).\n\ On reaching end of buffer, stop and signal error.") (n) Lisp_Object n; { if (NULL (n)) XFASTINT (n) = 1; else CHECK_NUMBER (n, 0); XSETINT (n, - XINT (n)); return Fforward_char (n); } DEFUN ("forward-line", Fforward_line, Sforward_line, 0, 1, "p", "Move point forward past ARG newlines.\n\ If ARG is zero, position after previous newline.\n\ If ARG is negative, position after -ARG'th newline before that one.\n\ If scan reaches end of buffer, stop there without error;\n\ value is count of lines left to move.") (n) Lisp_Object n; { register int pos = point; register int count, stop; if (NULL (n)) count = 1; else { CHECK_NUMBER (n, 0); count = XINT (n); } stop = FirstCharacter; if (count <= 0) { while (pos > stop && CharAt (pos - 1) != '\n') pos--; } while (count < 0 && pos > stop) { count++; pos--; /* In this loop, pos is one less than the position of scan. */ while (--pos >= stop && CharAt (pos) != '\n'); pos++; } stop = NumCharacters; while (count > 0 && pos <= stop) { count--; pos--; /* In this loop, pos is one less than the position of scan. */ while (++pos < stop && CharAt (pos) != '\n'); pos++; } SetPoint (pos); return make_number (count); } DEFUN ("beginning-of-line", Fbeginning_of_line, Sbeginning_of_line, 0, 1, "p", "Move point to beginning of current line.\n\ With argument ARG not nil or 1, move forward ARG - 1 lines first.\n\ If scan reaches end of buffer, stop there without error.") (n) Lisp_Object n; { if (NULL (n)) XFASTINT (n) = 1; else CHECK_NUMBER (n, 0); Fforward_line (make_number (XINT (n) - 1)); return Qnil; } DEFUN ("end-of-line", Fend_of_line, Send_of_line, 0, 1, "p", "Move point to end of current line.\n\ With argument ARG not nil or 1, move forward ARG - 1 lines first.\n\ If scan reaches end of buffer, stop there without error.") (n) Lisp_Object n; { register int pos; register int stop; if (NULL (n)) XFASTINT (n) = 1; else CHECK_NUMBER (n, 0); if (XINT (n) != 1) Fforward_line (make_number (XINT (n) - 1)); pos = point; stop = NumCharacters + 1; while (pos < stop && CharAt (pos) != '\n') pos++; SetPoint (pos); return Qnil; } DEFUN ("delete-char", Fdelete_char, Sdelete_char, 1, 2, "p\nP", "Delete the following ARG characters (previous, with negative arg).\n\ Optional second arg KILLFLAG non-nil means kill instead (save in kill ring).\n\ Interactively, ARG is the prefix arg, and kill if ARG was explicitly specd.") (n, killflag) Lisp_Object n, killflag; { CHECK_NUMBER (n, 0); if (NULL (killflag)) { if (XINT (n) < 0) { if (point + XINT (n) < FirstCharacter) Fsignal (Qbeginning_of_buffer, Qnil); else del_range (point + XINT (n), point); } else { if (point + XINT (n) > NumCharacters + 1) Fsignal (Qend_of_buffer, Qnil); else del_range (point, point + XINT (n)); } } else { call1 (Qkill_forward_chars, n); } return Qnil; } DEFUN ("delete-backward-char", Fdelete_backward_char, Sdelete_backward_char, 1, 2, "p\nP", "Delete the previous ARG characters (following, with negative ARG).\n\ Optional second arg KILLFLAG non-nil means kill instead (save in kill ring).\n\ Interactively, ARG is the prefix arg, and kill if ARG was explicitly specd.") (n, killflag) Lisp_Object n, killflag; { CHECK_NUMBER (n, 0); return Fdelete_char (make_number (-XINT (n)), killflag); } DEFUN ("self-insert-command", Fself_insert_command, Sself_insert_command, 1, 1, "p", "Insert this character.") (arg) Lisp_Object arg; { CHECK_NUMBER (arg, 0); if (XINT (arg) == 0 && last_command_char == ' ' && !NULL (bf_cur->auto_fill_hook) && !NULL (bf_cur->read_only) && current_column () > XFASTINT (bf_cur->fill_column)) Fapply (bf_cur->auto_fill_hook, Qnil); while (XINT (arg) > 0) { SelfInsert (last_command_char); XFASTINT (arg)--; /* Ok since old and new vals both nonneg */ } return Qnil; } DEFUN ("newline", Fnewline, Snewline, 0, 1, "P", "Insert a newline. With arg, insert that many newlines.\n\ In Auto Fill mode, can break the preceding line if no numeric arg.") (arg1) Lisp_Object arg1; { int flag; Lisp_Object arg; arg = Fprefix_numeric_value (arg1); if (!NULL (bf_cur->read_only)) Fsignal (Qbuffer_read_only, Qnil); if (NULL (arg1) && !NULL (bf_cur->auto_fill_hook) && current_column () > XFASTINT (bf_cur->fill_column)) Fapply (bf_cur->auto_fill_hook, Qnil); flag = point > FirstCharacter && CharAt (point - 1) == '\n'; if (flag) PointLeft (1); while (XINT (arg) > 0) { SelfInsert ('\n'); XFASTINT (arg)--; /* Ok since old and new vals both nonneg */ } if (flag) PointRight (1); return Qnil; } SelfInsert (c1) char c1; { extern Lisp_Object Fexpand_abbrev (); int hairy = 0; Lisp_Object tem; register enum syntaxcode synt; register int c = c1; if (!NULL (bf_cur->overwrite_mode) && point <= NumCharacters && c != '\n' && CharAt (point) != '\n' && (CharAt (point) != '\t' || XINT (bf_cur->tab_width) <= 0 || !((current_column () + 1) % XFASTINT (bf_cur->tab_width)))) { del_range (point, point + 1); hairy = 1; } if (!NULL (bf_cur->abbrev_mode) && SYNTAX (c) != Sword && NULL (bf_cur->read_only) && point > FirstCharacter && SYNTAX (CharAt (point - 1)) == Sword) { tem = Fexpand_abbrev (); if (!NULL (tem)) hairy = 1; } if ((c == ' ' || c == '\n') && !NULL (bf_cur->auto_fill_hook) && current_column () > XFASTINT (bf_cur->fill_column)) { InsCStr (&c1, 1); Fapply (bf_cur->auto_fill_hook, Qnil); hairy = 1; } else InsCStr (&c1, 1); synt = SYNTAX (c); if ((synt == Sclose || synt == Smath) && !NULL (Vblink_paren_hook) && INTERACTIVE) { Fapply (Vblink_paren_hook, Qnil); hairy = 1; } return hairy; } /* module initialization */ syms_of_cmds () { Qkill_backward_chars = intern ("kill-backward-chars"); staticpro (&Qkill_backward_chars); Qkill_forward_chars = intern ("kill-forward-chars"); staticpro (&Qkill_forward_chars); DefLispVar ("blink-paren-hook", &Vblink_paren_hook, "Function called, if non-nil, whenever a char with closeparen syntax is self-inserted."); Vblink_paren_hook = Qnil; defsubr (&Sforward_char); defsubr (&Sbackward_char); defsubr (&Sforward_line); defsubr (&Sbeginning_of_line); defsubr (&Send_of_line); defsubr (&Sdelete_char); defsubr (&Sdelete_backward_char); defsubr (&Sself_insert_command); defsubr (&Snewline); } keys_of_cmds () { int n; defkey (GlobalMap, Ctl('M'), "newline"); defkey (GlobalMap, Ctl('I'), "self-insert-command"); for (n = 040; n < 0177; n++) defkey (GlobalMap, n, "self-insert-command"); defkey (GlobalMap, Ctl ('A'), "beginning-of-line"); defkey (GlobalMap, Ctl ('B'), "backward-char"); defkey (GlobalMap, Ctl ('D'), "delete-char"); defkey (GlobalMap, Ctl ('E'), "end-of-line"); defkey (GlobalMap, Ctl ('F'), "forward-char"); defkey (GlobalMap, 0177, "delete-backward-char"); }