4.3BSD/usr/man/man3/plot.3x

.\"	@(#)plot.3x	6.2 (Berkeley) 5/15/86
.\"
.TH PLOT 3X  "May 15, 1986"
.AT 3
.SH NAME
plot: openpl, erase, label, line, circle, arc, move, cont, point, linemod, space, closepl \- graphics interface
.SH SYNOPSIS
.nf
.B openpl()
.PP
.B erase()
.PP
.B label(s)
.B char s[];
.PP
.B line(x1, y1, x2, y2)
.PP
.B circle(x, y, r)
.PP
.B arc(x, y, x0, y0, x1, y1)
.PP
.B move(x, y)
.PP
.B cont(x, y)
.PP
.B point(x, y)
.PP
.B linemod(s)
.B char s[];
.PP
.B space(x0, y0, x1, y1)
.PP
.B closepl()
.fi
.PP
.ft R
.SH DESCRIPTION
These subroutines generate graphic output in a relatively
device-independent manner.  See
.IR  plot (5)
for a description of their effect.
.I Openpl
must be used before any of the others to open the device for writing.
.I Closepl
flushes the output.
.PP
String arguments to
.I label
and
.I linemod
are null-terminated, and do not contain newlines.
.PP
Various flavors of these functions exist for different output devices. 
They are obtained by the following
.IR ld (1)
options:
.TP 8n
.B \-lplot
device-independent graphics stream on standard output for 
.IR plot (1)
filters
.br
.ns
.TP
.B \-l300
GSI 300 terminal
.br
.ns
.TP
.B \-l300s
GSI 300S terminal
.br
.ns
.TP
.B \-l450
GSI 450 terminal
.br
.ns
.TP
.B \-l4013
Tektronix 4013 terminal
.br
.ns
.TP
.B \-l4014
Tektronix 4014 and 4015 terminals with the Enhanced Graphics Module (Use
.B \-l4013
for 4014's or 4015's without the Enhanced Graphics Module)
.br
.ns
.TP
.B \-lplotaed
AED 512 color graphics terminal
.br
.ns
.TP
.B \-lplotbg
BBN bitgraph graphics terminal
.br
.ns
.TP
.B \-lplotdumb
Dumb terminals without cursor addressing or line printers
.br
.ns
.TP
.B \-lplot
DEC Gigi terminals
.br
.ns
.TP
.B \-lvt0
DEC vt100 terminals
.br
.ns
.TP
.B \-lplot2648
Hewlett Packard 2648 graphics terminal
.br
.ns
.TP
.B \-lplot7221
Hewlett Packard 7221 graphics terminal
.br
.ns
.TP
.B \-lplotimagen
Imagen laser printer (default 240 dots-per-inch resolution).
.PP
On many devices, it is necessary to pause after
.IR erase (),
otherwise plotting commands are lost.
The pause is normally done by the tty driver if at login time,
.I tset
found a
.I df
field in the
.IR termcap (5)
entry for the terminal.
If a pause is needed but not automatically being generated,
add
.RS
.nf
flush(stdout);
sleep(1);
.fi
.RE
after each
.IR erase ().
.SH "SEE ALSO"
plot(5), plot(1G), plot(3F), graph(1G)