4.4BSD/usr/src/contrib/X11R5-hp300/mit/server/ddx/hpbsd/cfb/cfbline.c
/***********************************************************
Copyright 1987 by Digital Equipment Corporation, Maynard, Massachusetts,
and the Massachusetts Institute of Technology, Cambridge, Massachusetts.
All Rights Reserved
Permission to use, copy, modify, and distribute this software and its
documentation for any purpose and without fee is hereby granted,
provided that the above copyright notice appear in all copies and that
both that copyright notice and this permission notice appear in
supporting documentation, and that the names of Digital or MIT not be
used in advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING
ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL
DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR
ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
SOFTWARE.
******************************************************************/
/* $XConsortium: cfbline.c,v 1.19 91/08/13 18:48:42 keith Exp $ */
#include "X.h"
#include "gcstruct.h"
#include "windowstr.h"
#include "pixmapstr.h"
#include "regionstr.h"
#include "scrnintstr.h"
#include "mistruct.h"
#include "cfb.h"
#include "cfbmskbits.h"
/* single-pixel lines on a color frame buffer
NON-SLOPED LINES
horizontal lines are always drawn left to right; we have to
move the endpoints right by one after they're swapped.
horizontal lines will be confined to a single band of a
region. the code finds that band (giving up if the lower
bound of the band is above the line we're drawing); then it
finds the first box in that band that contains part of the
line. we clip the line to subsequent boxes in that band.
vertical lines are always drawn top to bottom (y-increasing.)
this requires adding one to the y-coordinate of each endpoint
after swapping.
SLOPED LINES
when clipping a sloped line, we bring the second point inside
the clipping box, rather than one beyond it, and then add 1 to
the length of the line before drawing it. this lets us use
the same box for finding the outcodes for both endpoints. since
the equation for clipping the second endpoint to an edge gives us
1 beyond the edge, we then have to move the point towards the
first point by one step on the major axis.
eventually, there will be a diagram here to explain what's going
on. the method uses Cohen-Sutherland outcodes to determine
outsideness, and a method similar to Pike's layers for doing the
actual clipping.
*/
#define OUTCODES(result, x, y, pbox) \
if (x < pbox->x1) \
result |= OUT_LEFT; \
else if (x >= pbox->x2) \
result |= OUT_RIGHT; \
if (y < pbox->y1) \
result |= OUT_ABOVE; \
else if (y >= pbox->y2) \
result |= OUT_BELOW;
/*
#define SignTimes(sign, n) ((sign) * ((int)(n)))
*/
#define SignTimes(sign, n) \
( ((sign)<0) ? -(n) : (n) )
#define SWAPINT(i, j) \
{ register int _t = i; \
i = j; \
j = _t; \
}
#define SWAPPT(i, j) \
{ register DDXPointRec _t; \
_t = i; \
i = j; \
j = _t; \
}
void
#ifdef POLYSEGMENT
cfbSegmentSS (pDrawable, pGC, nseg, pSeg)
DrawablePtr pDrawable;
GCPtr pGC;
int nseg;
register xSegment *pSeg;
#else
cfbLineSS (pDrawable, pGC, mode, npt, pptInit)
DrawablePtr pDrawable;
GCPtr pGC;
int mode; /* Origin or Previous */
int npt; /* number of points */
DDXPointPtr pptInit;
#endif
{
int nboxInit;
register int nbox;
BoxPtr pboxInit;
register BoxPtr pbox;
#ifndef POLYSEGMENT
register DDXPointPtr ppt; /* pointer to list of translated points */
#endif
unsigned int oc1; /* outcode of point 1 */
unsigned int oc2; /* outcode of point 2 */
unsigned long *addrl; /* address of destination pixmap */
int nlwidth; /* width in longwords of destination pixmap */
int xorg, yorg; /* origin of window */
int adx; /* abs values of dx and dy */
int ady;
int signdx; /* sign of dx and dy */
int signdy;
int e, e1, e2; /* bresenham error and increments */
int len; /* length of segment */
int axis; /* major axis */
/* a bunch of temporaries */
int tmp;
register int y1, y2;
register int x1, x2;
RegionPtr cclip;
cfbPrivGCPtr devPriv;
unsigned long xor, and;
int alu;
devPriv = (cfbPrivGC *)(pGC->devPrivates[cfbGCPrivateIndex].ptr);
cclip = devPriv->pCompositeClip;
pboxInit = REGION_RECTS(cclip);
nboxInit = REGION_NUM_RECTS(cclip);
cfbGetLongWidthAndPointer (pDrawable, nlwidth, addrl)
SET_REGISTERS_FOR_WRITING(pDrawable->pScreen, ~0, GXcopy);
alu = devPriv->rop;
xor = devPriv->xor;
and = devPriv->and;
xorg = pDrawable->x;
yorg = pDrawable->y;
#ifdef POLYSEGMENT
while (nseg--)
#else
ppt = pptInit;
x2 = ppt->x + xorg;
y2 = ppt->y + yorg;
while(--npt)
#endif
{
nbox = nboxInit;
pbox = pboxInit;
#ifdef POLYSEGMENT
x1 = pSeg->x1 + xorg;
y1 = pSeg->y1 + yorg;
x2 = pSeg->x2 + xorg;
y2 = pSeg->y2 + yorg;
pSeg++;
#else
x1 = x2;
y1 = y2;
++ppt;
if (mode == CoordModePrevious)
{
xorg = x1;
yorg = y1;
}
x2 = ppt->x + xorg;
y2 = ppt->y + yorg;
#endif
if (x1 == x2)
{
/* make the line go top to bottom of screen, keeping
endpoint semantics
*/
if (y1 > y2)
{
register int tmp;
tmp = y2;
y2 = y1 + 1;
y1 = tmp + 1;
#ifdef POLYSEGMENT
if (pGC->capStyle != CapNotLast)
y1--;
#endif
}
#ifdef POLYSEGMENT
else if (pGC->capStyle != CapNotLast)
y2++;
#endif
/* get to first band that might contain part of line */
while ((nbox) && (pbox->y2 <= y1))
{
pbox++;
nbox--;
}
if (nbox)
{
/* stop when lower edge of box is beyond end of line */
while((nbox) && (y2 >= pbox->y1))
{
if ((x1 >= pbox->x1) && (x1 < pbox->x2))
{
int y1t, y2t;
/* this box has part of the line in it */
y1t = max(y1, pbox->y1);
y2t = min(y2, pbox->y2);
if (y1t != y2t)
{
cfbVertS (alu, and, xor,
addrl, nlwidth,
x1, y1t, y2t-y1t);
}
}
nbox--;
pbox++;
}
}
#ifndef POLYSEGMENT
y2 = ppt->y + yorg;
#endif
}
else if (y1 == y2)
{
/* force line from left to right, keeping
endpoint semantics
*/
if (x1 > x2)
{
register int tmp;
tmp = x2;
x2 = x1 + 1;
x1 = tmp + 1;
#ifdef POLYSEGMENT
if (pGC->capStyle != CapNotLast)
x1--;
#endif
}
#ifdef POLYSEGMENT
else if (pGC->capStyle != CapNotLast)
x2++;
#endif
/* find the correct band */
while( (nbox) && (pbox->y2 <= y1))
{
pbox++;
nbox--;
}
/* try to draw the line, if we haven't gone beyond it */
if ((nbox) && (pbox->y1 <= y1))
{
/* when we leave this band, we're done */
tmp = pbox->y1;
while((nbox) && (pbox->y1 == tmp))
{
int x1t, x2t;
if (pbox->x2 <= x1)
{
/* skip boxes until one might contain start point */
nbox--;
pbox++;
continue;
}
/* stop if left of box is beyond right of line */
if (pbox->x1 >= x2)
{
nbox = 0;
break;
}
x1t = max(x1, pbox->x1);
x2t = min(x2, pbox->x2);
if (x1t != x2t)
{
cfbHorzS (alu, and, xor,
addrl, nlwidth,
x1t, y1, x2t-x1t);
}
nbox--;
pbox++;
}
}
#ifndef POLYSEGMENT
x2 = ppt->x + xorg;
#endif
}
else /* sloped line */
{
signdx = 1;
if ((adx = x2 - x1) < 0)
{
adx = -adx;
signdx = -1;
}
signdy = 1;
if ((ady = y2 - y1) < 0)
{
ady = -ady;
signdy = -1;
}
if (adx > ady)
{
axis = X_AXIS;
e1 = ady << 1;
e2 = e1 - (adx << 1);
e = e1 - adx;
}
else
{
axis = Y_AXIS;
e1 = adx << 1;
e2 = e1 - (ady << 1);
e = e1 - ady;
}
/* we have bresenham parameters and two points.
all we have to do now is clip and draw.
*/
while(nbox--)
{
oc1 = 0;
oc2 = 0;
OUTCODES(oc1, x1, y1, pbox);
OUTCODES(oc2, x2, y2, pbox);
if ((oc1 | oc2) == 0)
{
if (axis == X_AXIS)
len = adx;
else
len = ady;
#ifdef POLYSEGMENT
if (pGC->capStyle != CapNotLast)
len++;
#endif
cfbBresS (alu, and, xor,
addrl, nlwidth,
signdx, signdy, axis, x1, y1,
e, e1, e2, len);
break;
}
else if (oc1 & oc2)
{
pbox++;
}
else
{
/*
* let the mfb helper routine do our work;
* better than duplicating code...
*/
BoxRec box;
DDXPointRec pt1Copy; /* clipped start point */
DDXPointRec pt2Copy; /* clipped end point */
int err; /* modified bresenham error term */
int clip1, clip2; /* clippedness of the endpoints */
int clipdx, clipdy; /* difference between clipped and
unclipped start point */
DDXPointRec pt1;
pt1.x = pt1Copy.x = x1;
pt1.y = pt1Copy.y = y1;
pt2Copy.x = x2;
pt2Copy.y = y2;
box.x1 = pbox->x1;
box.y1 = pbox->y1;
box.x2 = pbox->x2-1;
box.y2 = pbox->y2-1;
clip1 = 0;
clip2 = 0;
if (mfbClipLine (pbox, box,
&pt1, &pt1Copy, &pt2Copy,
adx, ady, signdx, signdy, axis,
&clip1, &clip2) == 1)
{
if (axis == X_AXIS)
len = abs(pt2Copy.x - pt1Copy.x);
else
len = abs(pt2Copy.y - pt1Copy.y);
#ifdef POLYSEGMENT
if (clip2 != 0 || pGC->capStyle != CapNotLast)
len++;
#else
len += (clip2 != 0);
#endif
if (len)
{
/* unwind bresenham error term to first point */
if (clip1)
{
clipdx = abs(pt1Copy.x - x1);
clipdy = abs(pt1Copy.y - y1);
if (axis == X_AXIS)
err = e+((clipdy*e2) + ((clipdx-clipdy)*e1));
else
err = e+((clipdx*e2) + ((clipdy-clipdx)*e1));
}
else
err = e;
cfbBresS
(alu, and, xor,
addrl, nlwidth,
signdx, signdy, axis, pt1Copy.x, pt1Copy.y,
err, e1, e2, len);
}
}
pbox++;
}
} /* while (nbox--) */
} /* sloped line */
} /* while (nline--) */
#ifndef POLYSEGMENT
/* paint the last point if the end style isn't CapNotLast.
(Assume that a projecting, butt, or round cap that is one
pixel wide is the same as the single pixel of the endpoint.)
*/
if ((pGC->capStyle != CapNotLast) &&
((ppt->x + xorg != pptInit->x + pDrawable->x) ||
(ppt->y + yorg != pptInit->y + pDrawable->y) ||
(ppt == pptInit + 1)))
{
nbox = nboxInit;
pbox = pboxInit;
while (nbox--)
{
if ((x2 >= pbox->x1) &&
(y2 >= pbox->y1) &&
(x2 < pbox->x2) &&
(y2 < pbox->y2))
{
unsigned long mask;
unsigned long scrbits;
mask = cfbmask[x2 & PIM];
addrl += (y2 * nlwidth) + (x2 >> PWSH);
scrbits = *addrl;
*addrl = (scrbits & ~mask) |
(DoRRop (scrbits, and, xor) & mask);
break;
}
else
pbox++;
}
}
#endif
}
/*
* Draw dashed 1-pixel lines.
*/
void
#ifdef POLYSEGMENT
cfbSegmentSD (pDrawable, pGC, nseg, pSeg)
DrawablePtr pDrawable;
register GCPtr pGC;
int nseg;
register xSegment *pSeg;
#else
cfbLineSD( pDrawable, pGC, mode, npt, pptInit)
DrawablePtr pDrawable;
register GCPtr pGC;
int mode; /* Origin or Previous */
int npt; /* number of points */
DDXPointPtr pptInit;
#endif
{
int nboxInit;
register int nbox;
BoxPtr pboxInit;
register BoxPtr pbox;
#ifndef POLYSEGMENT
register DDXPointPtr ppt; /* pointer to list of translated points */
#endif
register unsigned int oc1; /* outcode of point 1 */
register unsigned int oc2; /* outcode of point 2 */
unsigned long *addrl; /* address of destination pixmap */
int nlwidth; /* width in longwords of destination pixmap */
int xorg, yorg; /* origin of window */
int adx; /* abs values of dx and dy */
int ady;
int signdx; /* sign of dx and dy */
int signdy;
int e, e1, e2; /* bresenham error and increments */
int len; /* length of segment */
int axis; /* major axis */
int x1, x2, y1, y2;
RegionPtr cclip;
cfbRRopRec rrops[2];
unsigned char *pDash;
int dashOffset;
int numInDashList;
int dashIndex;
int isDoubleDash;
int dashIndexTmp, dashOffsetTmp;
int unclippedlen;
cfbPrivGCPtr devPriv;
devPriv = (cfbPrivGC *)(pGC->devPrivates[cfbGCPrivateIndex].ptr);
cclip = devPriv->pCompositeClip;
rrops[0].rop = devPriv->rop;
rrops[0].and = devPriv->and;
rrops[0].xor = devPriv->xor;
if (pGC->alu == GXcopy)
{
rrops[1].rop = GXcopy;
rrops[1].and = 0;
rrops[1].xor = PFILL (pGC->bgPixel);
}
else
{
rrops[1].rop = cfbReduceRasterOp (pGC->alu,
pGC->bgPixel, pGC->planemask,
&rrops[1].and, &rrops[1].xor);
}
pboxInit = REGION_RECTS(cclip);
nboxInit = REGION_NUM_RECTS(cclip);
cfbGetLongWidthAndPointer (pDrawable, nlwidth, addrl)
SET_REGISTERS_FOR_WRITING(pDrawable->pScreen, ~0, GXcopy);
/* compute initial dash values */
pDash = (unsigned char *) pGC->dash;
numInDashList = pGC->numInDashList;
isDoubleDash = (pGC->lineStyle == LineDoubleDash);
dashIndex = 0;
dashOffset = 0;
miStepDash ((int)pGC->dashOffset, &dashIndex, pDash,
numInDashList, &dashOffset);
xorg = pDrawable->x;
yorg = pDrawable->y;
#ifdef POLYSEGMENT
while (nseg--)
#else
ppt = pptInit;
x2 = ppt->x + xorg;
y2 = ppt->y + yorg;
while(--npt)
#endif
{
nbox = nboxInit;
pbox = pboxInit;
#ifdef POLYSEGMENT
x1 = pSeg->x1 + xorg;
y1 = pSeg->y1 + yorg;
x2 = pSeg->x2 + xorg;
y2 = pSeg->y2 + yorg;
pSeg++;
#else
x1 = x2;
y1 = y2;
++ppt;
if (mode == CoordModePrevious)
{
xorg = x1;
yorg = y1;
}
x2 = ppt->x + xorg;
y2 = ppt->y + yorg;
#endif
adx = x2 - x1;
ady = y2 - y1;
signdx = sign(adx);
signdy = sign(ady);
adx = abs(adx);
ady = abs(ady);
if (adx > ady)
{
axis = X_AXIS;
e1 = ady << 1;
e2 = e1 - (adx << 1);
e = e1 - adx;
unclippedlen = adx;
}
else
{
axis = Y_AXIS;
e1 = adx << 1;
e2 = e1 - (ady << 1);
e = e1 - ady;
unclippedlen = ady;
}
/* we have bresenham parameters and two points.
all we have to do now is clip and draw.
*/
while(nbox--)
{
oc1 = 0;
oc2 = 0;
OUTCODES(oc1, x1, y1, pbox);
OUTCODES(oc2, x2, y2, pbox);
if ((oc1 | oc2) == 0)
{
#ifdef POLYSEGMENT
if (pGC->capStyle != CapNotLast)
unclippedlen++;
dashIndexTmp = dashIndex;
dashOffsetTmp = dashOffset;
cfbBresD (rrops,
&dashIndexTmp, pDash, numInDashList,
&dashOffsetTmp, isDoubleDash,
addrl, nlwidth,
signdx, signdy, axis, x1, y1,
e, e1, e2, unclippedlen);
break;
#else
cfbBresD (rrops,
&dashIndex, pDash, numInDashList,
&dashOffset, isDoubleDash,
addrl, nlwidth,
signdx, signdy, axis, x1, y1,
e, e1, e2, unclippedlen);
goto dontStep;
#endif
}
else if (oc1 & oc2)
{
pbox++;
}
else /* have to clip */
{
/*
* let the mfb helper routine do our work;
* better than duplicating code...
*/
BoxRec box;
DDXPointRec pt1Copy; /* clipped start point */
DDXPointRec pt2Copy; /* clipped end point */
int err; /* modified bresenham error term */
int clip1, clip2; /* clippedness of the endpoints */
int clipdx, clipdy; /* difference between clipped and
unclipped start point */
DDXPointRec pt1;
pt1.x = pt1Copy.x = x1;
pt1.y = pt1Copy.y = y1;
pt2Copy.x = x2;
pt2Copy.y = y2;
box.x1 = pbox->x1;
box.y1 = pbox->y1;
box.x2 = pbox->x2-1;
box.y2 = pbox->y2-1;
clip1 = 0;
clip2 = 0;
if (mfbClipLine (pbox, box,
&pt1, &pt1Copy, &pt2Copy,
adx, ady, signdx, signdy, axis,
&clip1, &clip2) == 1)
{
dashIndexTmp = dashIndex;
dashOffsetTmp = dashOffset;
if (clip1)
{
int dlen;
if (axis == X_AXIS)
dlen = abs(pt1Copy.x - x1);
else
dlen = abs(pt1Copy.y - y1);
miStepDash (dlen, &dashIndexTmp, pDash,
numInDashList, &dashOffsetTmp);
}
if (axis == X_AXIS)
len = abs(pt2Copy.x - pt1Copy.x);
else
len = abs(pt2Copy.y - pt1Copy.y);
#ifdef POLYSEGMENT
if (clip2 != 0 || pGC->capStyle != CapNotLast)
len++;
#else
len += (clip2 != 0);
#endif
if (len)
{
/* unwind bresenham error term to first point */
if (clip1)
{
clipdx = abs(pt1Copy.x - x1);
clipdy = abs(pt1Copy.y - y1);
if (axis == X_AXIS)
err = e+((clipdy*e2) + ((clipdx-clipdy)*e1));
else
err = e+((clipdx*e2) + ((clipdy-clipdx)*e1));
}
else
err = e;
cfbBresD (rrops,
&dashIndexTmp, pDash, numInDashList,
&dashOffsetTmp, isDoubleDash,
addrl, nlwidth,
signdx, signdy, axis, pt1Copy.x, pt1Copy.y,
err, e1, e2, len);
}
}
pbox++;
}
} /* while (nbox--) */
#ifndef POLYSEGMENT
/*
* walk the dash list around to the next line
*/
miStepDash (unclippedlen, &dashIndex, pDash,
numInDashList, &dashOffset);
dontStep: ;
#endif
} /* while (nline--) */
#ifndef POLYSEGMENT
/* paint the last point if the end style isn't CapNotLast.
(Assume that a projecting, butt, or round cap that is one
pixel wide is the same as the single pixel of the endpoint.)
*/
if ((pGC->capStyle != CapNotLast) &&
((dashIndex & 1) == 0 || isDoubleDash) &&
((ppt->x + xorg != pptInit->x + pDrawable->x) ||
(ppt->y + yorg != pptInit->y + pDrawable->y) ||
(ppt == pptInit + 1)))
{
nbox = nboxInit;
pbox = pboxInit;
while (nbox--)
{
if ((x2 >= pbox->x1) &&
(y2 >= pbox->y1) &&
(x2 < pbox->x2) &&
(y2 < pbox->y2))
{
unsigned long mask;
int pix;
pix = 0;
if (dashIndex & 1)
pix = 1;
mask = cfbmask[x2 & PIM];
addrl += (y2 * nlwidth) + (x2 >> PWSH);
*addrl = DoMaskRRop (*addrl, rrops[pix].and, rrops[pix].xor, mask);
break;
}
else
pbox++;
}
}
#endif
}