4.4BSD/usr/share/man/cat1/uusend.0

UUSEND(1)                    BSD Reference Manual                    UUSEND(1)

NNAAMMEE
     uuuusseenndd - send a file to a remote host

SSYYNNOOPPSSIISS
     uuuusseenndd [--mm _m_o_d_e] _s_o_u_r_c_e_f_i_l_e _s_y_s_1_!_s_y_s_2_!_._._!_r_e_m_o_t_e_f_i_l_e

DDEESSCCRRIIPPTTIIOONN
     UUuusseenndd sends a file to a given location on a remote system.  The system
     need not be directly connected to the local system, but a chain of
     uucp(1) links must to connect the two systems.

     Available option:

     --mm _m_o_d_e     The mode of the file on the remote end is taken from the oc-
                 tal number given.  Otherwise, the mode of the input file will
                 be used.

     The sourcefile can be `--', meaning to use the standard input.  Both of
     these options are primarily intended for internal use of uuuusseenndd.

     The remotefile can include the _~_u_s_e_r_i_d syntax.

DDIIAAGGNNOOSSTTIICCSS
     If anything goes wrong any further away than the first system down the
     line, you will never hear about it.

SSEEEE AALLSSOO
     uux(1),  uucp(1),  uuencode(1)

BBUUGGSS
     This command should not exist, since uucp should handle it.

     All systems along the line must have the uuuusseenndd command available and al-
     low remote execution of it.

     Some uucp systems have a bug where binary files cannot be the input to a
     uux(1) command.  If this bug exists in any system along the line, the
     file will show up severly munged.

HHIISSTTOORRYY
     The uuuusseenndd command appeared in 4.0BSD.

4th Berkeley Distribution        June 6, 1993                                1