4.4BSD/usr/share/man/cat3/db.0
DBOPEN(3) BSD Programmer's Manual DBOPEN(3)
NNAAMMEE
dbopen - database access methods
SSYYNNOOPPSSIISS
##iinncclluuddee <<ssyyss//ttyyppeess..hh>>
##iinncclluuddee <<lliimmiittss..hh>>
##iinncclluuddee <<ddbb..hh>>
DDBB **
ddbbooppeenn((ccoonnsstt cchhaarr **ffiillee,, iinntt ffllaaggss,, iinntt mmooddee,, DDBBTTYYPPEE ttyyppee,,
ccoonnsstt vvooiidd **ooppeenniinnffoo));;
DDEESSCCRRIIPPTTIIOONN
_D_b_o_p_e_n is the library interface to database files. The
supported file formats are btree, hashed and UNIX file
oriented. The btree format is a representation of a
sorted, balanced tree structure. The hashed format is an
extensible, dynamic hashing scheme. The flat-file format
is a byte stream file with fixed or variable length
records. The formats and file format specific information
are described in detail in their respective manual pages
_b_t_r_e_e(3), _h_a_s_h(3) and _r_e_c_n_o(3).
Dbopen opens _f_i_l_e for reading and/or writing. Files never
intended to be preserved on disk may be created by setting
the file parameter to NULL.
The _f_l_a_g_s and _m_o_d_e _a_r_g_u_m_e_n_t_s are as specified to the
_o_p_e_n(2) routine, however, only the O_CREAT, O_EXCL,
O_EXLOCK, O_RDONLY, O_RDWR, O_SHLOCK and O_TRUNC flags are
meaningful. (Note, opening a database file O_WRONLY is
not possible.)
The _t_y_p_e argument is of type DBTYPE (as defined in the
<db.h> include file) and may be set to DB_BTREE, DB_HASH
or DB_RECNO.
The _o_p_e_n_i_n_f_o argument is a pointer to an access method
specific structure described in the access method's manual
page. If _o_p_e_n_i_n_f_o is NULL, each access method will use
defaults appropriate for the system and the access method.
_D_b_o_p_e_n returns a pointer to a DB structure on success and
NULL on error. The DB structure is defined in the <db.h>
include file, and contains at least the following fields:
typedef struct {
DBTYPE type;
int (*close)(const DB *db);
int (*del)(const DB *db, const DBT *key, u_int flags);
int (*fd)(const DB *db);
4.4 Berkeley Distribution June 4, 1993 1
DBOPEN(3) BSD Programmer's Manual DBOPEN(3)
int (*get)(const DB *db, DBT *key, DBT *data, u_int flags);
int (*put)(const DB *db, DBT *key, const DBT *data,
u_int flags);
int (*sync)(const DB *db, u_int flags);
int (*seq)(const DB *db, DBT *key, DBT *data, u_int flags);
} DB;
These elements describe a database type and a set of func-
tions performing various actions. These functions take a
pointer to a structure as returned by _d_b_o_p_e_n, and some-
times one or more pointers to key/data structures and a
flag value.
type The type of the underlying access method (and file
format).
close A pointer to a routine to flush any cached informa-
tion to disk, free any allocated resources, and
close the underlying file(s). Since key/data pairs
may be cached in memory, failing to sync the file
with a _c_l_o_s_e or _s_y_n_c function may result in incon-
sistent or lost information. _C_l_o_s_e routines return
-1 on error (setting _e_r_r_n_o) and 0 on success.
del A pointer to a routine to remove key/data pairs
from the database.
The parameter _f_l_a_g may be set to the following
value:
R_CURSOR
Delete the record referenced by the cursor.
The cursor must have previously been ini-
tialized.
_D_e_l_e_t_e routines return -1 on error (setting _e_r_r_n_o),
0 on success, and 1 if the specified _k_e_y was not in
the file.
fd A pointer to a routine which returns a file
descriptor representative of the underlying
database. A file descriptor referencing the same
file will be returned to all processes which call
_d_b_o_p_e_n with the same _f_i_l_e name. This file descrip-
tor may be safely used as a argument to the
_f_c_n_t_l(2) and _f_l_o_c_k(2) locking functions. The file
descriptor is not necessarily associated with any
of the underlying files used by the access method.
No file descriptor is available for in memory
databases. _F_d routines return -1 on error (setting
_e_r_r_n_o), and the file descriptor on success.
4.4 Berkeley Distribution June 4, 1993 2
DBOPEN(3) BSD Programmer's Manual DBOPEN(3)
get A pointer to a routine which is the interface for
keyed retrieval from the database. The address and
length of the data associated with the specified
_k_e_y are returned in the structure referenced by
_d_a_t_a. _G_e_t routines return -1 on error (setting
_e_r_r_n_o), 0 on success, and 1 if the _k_e_y was not in
the file.
put A pointer to a routine to store key/data pairs in
the database.
The parameter _f_l_a_g may be set to one of the follow-
ing values:
R_CURSOR
Replace the key/data pair referenced by the
cursor. The cursor must have previously
been initialized.
R_IAFTER
Append the data immediately after the data
referenced by _k_e_y, creating a new key/data
pair. The record number of the appended
key/data pair is returned in the _k_e_y struc-
ture. (Applicable only to the DB_RECNO
access method.)
R_IBEFORE
Insert the data immediately before the data
referenced by _k_e_y, creating a new key/data
pair. The record number of the inserted
key/data pair is returned in the _k_e_y struc-
ture. (Applicable only to the DB_RECNO
access method.)
R_NOOVERWRITE
Enter the new key/data pair only if the key
does not previously exist.
R_SETCURSOR
Store the key/data pair, setting or initial-
izing the position of the cursor to refer-
ence it. (Applicable only to the DB_BTREE
and DB_RECNO access methods.)
R_SETCURSOR is available only for the DB_BTREE and
DB_RECNO access methods because it implies that the
keys have an inherent order which does not change.
R_IAFTER and R_IBEFORE are available only for the
DB_RECNO access method because they each imply that
4.4 Berkeley Distribution June 4, 1993 3
DBOPEN(3) BSD Programmer's Manual DBOPEN(3)
the access method is able to create new keys. This
is only true if the keys are ordered and indepen-
dent, record numbers for example.
The default behavior of the _p_u_t routines is to
enter the new key/data pair, replacing any previ-
ously existing key.
_P_u_t routines return -1 on error (setting _e_r_r_n_o), 0
on success, and 1 if the R_NOOVERWRITE _f_l_a_g was set
and the key already exists in the file.
seq A pointer to a routine which is the interface for
sequential retrieval from the database. The
address and length of the key are returned in the
structure referenced by _k_e_y, and the address and
length of the data are returned in the structure
referenced by _d_a_t_a.
Sequential key/data pair retrieval may begin at any
time, and the position of the ``cursor'' is not
affected by calls to the _d_e_l, _g_e_t, _p_u_t, or _s_y_n_c
routines. Modifications to the database during a
sequential scan will be reflected in the scan, i.e.
records inserted behind the cursor will not be
returned while records inserted in front of the
cursor will be returned.
The flag value mmuusstt be set to one of the following
values:
R_CURSOR
The data associated with the specified key
is returned. This differs from the _g_e_t rou-
tines in that it sets or initializes the
cursor to the location of the key as well.
(Note, for the DB_BTREE access method, the
returned key is not necessarily an exact
match for the specified key. The returned
key is the smallest key greater than or
equal to the specified key, permitting par-
tial key matches and range searches.)
R_FIRST
The first key/data pair of the database is
returned, and the cursor is set or initial-
ized to reference it.
R_LAST The last key/data pair of the database is
returned, and the cursor is set or initial-
ized to reference it. (Applicable only to
4.4 Berkeley Distribution June 4, 1993 4
DBOPEN(3) BSD Programmer's Manual DBOPEN(3)
the DB_BTREE and DB_RECNO access methods.)
R_NEXT Retrieve the key/data pair immediately after
the cursor. If the cursor is not yet set,
this is the same as the R_FIRST flag.
R_PREV Retrieve the key/data pair immediately
before the cursor. If the cursor is not yet
set, this is the same as the R_LAST flag.
(Applicable only to the DB_BTREE and
DB_RECNO access methods.)
R_LAST and R_PREV are available only for the
DB_BTREE and DB_RECNO access methods because they
each imply that the keys have an inherent order
which does not change.
_S_e_q routines return -1 on error (setting _e_r_r_n_o), 0
on success and 1 if there are no key/data pairs
less than or greater than the specified or current
key. If the DB_RECNO access method is being used,
and if the database file is a character special
file and no complete key/data pairs are currently
available, the _s_e_q routines return 2.
sync A pointer to a routine to flush any cached informa-
tion to disk. If the database is in memory only,
the _s_y_n_c routine has no effect and will always suc-
ceed.
The flag value may be set to the following value:
R_RECNOSYNC
If the DB_RECNO access method is being used,
this flag causes the sync routine to apply
to the btree file which underlies the recno
file, not the recno file itself. (See the
_b_f_n_a_m_e field of the _r_e_c_n_o(3) manual page for
more information.)
_S_y_n_c routines return -1 on error (setting _e_r_r_n_o)
and 0 on success.
KKEEYY//DDAATTAA PPAAIIRRSS
Access to all file types is based on key/data pairs. Both
keys and data are represented by the following data struc-
ture:
typedef struct {
void *data;
size_t size;
4.4 Berkeley Distribution June 4, 1993 5
DBOPEN(3) BSD Programmer's Manual DBOPEN(3)
} DBT;
The elements of the DBT structure are defined as follows:
data A pointer to a byte string.
size The length of the byte string.
Key and data byte strings may reference strings of essen-
tially unlimited length although any two of them must fit
into available memory at the same time. It should be
noted that the access methods provide no guarantees about
byte string alignment.
EERRRROORRSS
The _d_b_o_p_e_n routine may fail and set _e_r_r_n_o for any of the
errors specified for the library routines _o_p_e_n(2) and _m_a_l_-
_l_o_c(3) or the following:
[EFTYPE]
A file is incorrectly formatted.
[EINVAL]
A parameter has been specified (hash function, pad
byte etc.) that is incompatible with the current
file specification or which is not meaningful for
the function (for example, use of the cursor with-
out prior initialization) or there is a mismatch
between the version number of file and the soft-
ware.
The _c_l_o_s_e routines may fail and set _e_r_r_n_o for any of the
errors specified for the library routines _c_l_o_s_e(2),
_r_e_a_d(2), _w_r_i_t_e(2), _f_r_e_e(3), or _f_s_y_n_c(2).
The _d_e_l, _g_e_t, _p_u_t and _s_e_q routines may fail and set _e_r_r_n_o
for any of the errors specified for the library routines
_r_e_a_d(2), _w_r_i_t_e(2), _f_r_e_e(3) or _m_a_l_l_o_c(3).
The _f_d routines will fail and set _e_r_r_n_o to ENOENT for in
memory databases.
The _s_y_n_c routines may fail and set _e_r_r_n_o for any of the
errors specified for the library routine _f_s_y_n_c(2).
SSEEEE AALLSSOO
_b_t_r_e_e(3), _h_a_s_h(3), _m_p_o_o_l(3), _r_e_c_n_o(3)
BBUUGGSS
The typedef DBT is a mnemonic for ``data base thang'', and
was used because noone could think of a reasonable name
4.4 Berkeley Distribution June 4, 1993 6
DBOPEN(3) BSD Programmer's Manual DBOPEN(3)
that wasn't already used.
The file descriptor interface is a kluge and will be
deleted in a future version of the interface.
None of the access methods provide any form of concurrent
access, locking, or transactions.
4.4 Berkeley Distribution June 4, 1993 7