4.4BSD/usr/src/contrib/gcc-2.3.3/INSTALL
This file documents the installation of the GNU compiler. Copyright (C)
1988, 1989, 1992 Free Software Foundation, Inc. You may copy,
distribute, and modify it freely as long as you preserve this copyright
notice and permission notice.
Installing GNU CC
******************
Here is the procedure for installing GNU CC on a Unix system.
1. If you have built GNU CC previously in the same directory for a
different target machine, do `make distclean' to delete all files
that might be invalid. One of the files this deletes is
`Makefile'; if `make distclean' complains that `Makefile' does not
exist, it probably means that the directory is already suitably
clean.
2. On a System V release 4 system, make sure `/usr/bin' precedes
`/usr/ucb' in `PATH'. The `cc' command in `/usr/ucb' uses
libraries which have bugs.
3. Specify the host and target machine configurations. You do this by
running the file `configure' with appropriate arguments.
If you are building a compiler to produce code for the machine it
runs on, specify just one machine type. Use the `--target'
option; the host type will default to be the same as the target.
(For information on building a cross-compiler, see *Note
Cross-Compiler::.) The command looks like this:
configure --target=sparc-sun-sunos4.1
A configuration name may be canonical or it may be more or less
abbreviated.
A canonical configuration name has three parts, separated by
dashes. It looks like this: `CPU-COMPANY-SYSTEM'. (The three parts
may themselves contain dashes; `configure' can figure out which
dashes serve which purpose.) For example, `m68k-sun-sunos4.1'
specifies a Sun 3.
You can also replace parts of the configuration by nicknames or
aliases. For example, `sun3' stands for `m68k-sun', so
`sun3-sunos4.1' is another way to specify a Sun 3. You can also
use simply `sun3-sunos', since the version of SunOS is assumed by
default to be version 4. `sun3-bsd' also works, since `configure'
knows that the only BSD variant on a Sun 3 is SunOS.
You can specify a version number after any of the system types,
and some of the CPU types. In most cases, the version is
irrelevant, and will be ignored. So you might as well specify the
version if you know it.
Here are the possible CPU types:
a29k, alpha, arm, cN, elxsi, hppa1.0, hppa1.1, i386, i860,
i960, m68000, m68k, m88k, mips, ns32k, pyramid, romp, rs6000,
sparc, vax, we32k.
Here are the recognized company names. As you can see, customary
abbreviations are used rather than the longer official names.
alliant, altos, apollo, att, cbm, convergent, convex, crds,
dec, dg, encore, harris, hp, ibm, mips, motorola, ncr, next,
ns, omron, sequent, sgi, sony, sun, tti, unicom.
The company name is meaningful only to disambiguate when the rest
of the information supplied is insufficient. You can omit it,
writing just `CPU-SYSTEM', if it is not needed. For example,
`vax-ultrix4.2' is equivalent to `vax-dec-ultrix4.2'.
Here is a list of system types:
aix, aos, bsd, ctix, dgux, dynix, genix, hpux, isc, linux,
luna, mach, minix, newsos, osf, osfrose, riscos, sco, sunos,
sysv, ultrix, unos, vms.
You can omit the system type; then `configure' guesses the
operating system from the CPU and company.
You can add a version number to the system type; this may or may
not make a difference. For example, you can write `bsd4.3' or
`bsd4.4' to distinguish versions of BSD. In practice, the version
number is most needed for `sysv3' and `sysv4', which are often
treated differently.
If you specify an impossible combination such as `i860-dg-vms',
then you may get an error message from `configure', or it may
ignore part of the information and do the best it can with the
rest. `configure' always prints the canonical name for the
alternative that it used.
Often a particular model of machine has a name. Many machine
names are recognized as aliases for CPU/company combinations.
Thus, the machine name `sun3', mentioned above, is an alias for
`m68k-sun'. Sometimes we accept a company name as a machine name,
when the name is popularly used for a particular machine. Here is
a table of the known machine names:
3300, 3b1, 3bN, 7300, altos3068, altos, apollo68, att-7300,
balance, convex-cN, crds, decstation-3100, decstation, delta,
encore, fx2800, gmicro, hp7NN, hp8NN, hp9k2NN, hp9k3NN,
hp9k7NN, hp9k8NN, iris4d, iris, isi68, m3230, magnum, merlin,
miniframe, mmax, news-3600, news800, news, next, pbd, pc532,
pmax, ps2, risc-news, rtpc, sun2, sun386i, sun386, sun3,
sun4, symmetry, tower-32, tower.
Remember that a machine name specifies both the cpu type and the
company name.
There are four additional options you can specify independently to
describe variant hardware and software configurations. These are
`--with-gnu-as', `--with-gnu-ld', `--with-stabs' and `--nfp'.
`--with-gnu-as'
On certain systems, you must specify whether you want GNU CC
to work with the usual compilation tools or with the GNU
compilation tools (including GAS). Use the `--with-gnu-as'
argument when you run `configure', if you want to use the GNU
tools. (Specify `--with-gnu-ld' as well, since on these
systems GAS works only with the GNU linker.) The systems
where this makes a difference are `i386-ANYTHING-sysv',
`i860-ANYTHING-bsd', `m68k-hp-hpux', `m68k-sony-bsd',
`m68k-altos-sysv', `m68000-hp-hpux', and `m68000-att-sysv'.
On any other system, `--with-gnu-as' has no effect.
`--with-gnu-ld'
Specify the option `--with-gnu-ld' if you plan to use the GNU
linker. This inhibits the installation of `collect2', a
program which otherwise serves as a front-end for the
system's linker on most configurations.
`--with-stabs'
On MIPS based systems, you must specify whether you want GNU
CC to create the normal ECOFF debugging format, or to use
BSD-style stabs passed through the ECOFF symbol table. The
normal ECOFF debug format cannot fully handle languages other
than C. BSD stabs format can handle other languages, but it
only works with the GNU debugger GDB.
Normally, GNU CC uses the ECOFF debugging format by default;
if you prefer BSD stabs, specify `--with-stabs' when you
configure GNU CC.
No matter which default you choose when you configure GNU CC,
the user can use the `-gcoff' and `-gstabs+' options to
specify explicitly the debug format for a particular
compilation.
`--nfp'
On certain systems, you must specify whether the machine has
a floating point unit. These systems are `m68k-sun-sunosN'
and `m68k-isi-bsd'. On any other system, `--nfp' currently
has no effect, though perhaps there are other systems where
it could usefully make a difference.
If you want to install your own homemade configuration files, you
can use `local' as the company name to access them. If you use
configuration `CPU-local', the entire configuration name is used
to form the configuration file names.
Thus, if you specify `m68k-local', then the files used are
`m68k-local.md', `m68k-local.h', `m68k-local.c',
`xm-m68k-local.h', `t-m68k-local', and `x-m68k-local'.
Here is a list of configurations that have special treatment or
special things you must know:
`alpha-*-osf1'
Systems using processors that implement the DEC Alpha
architecture and are running the OSF/1 operating system. (VMS
on the Alpha is not currently supported by GNU CC.) As of
this writing, the only Alpha-based product currently
available from DEC is the 21064 (EV4) processor chip; no
system-level products can be ordered. This port is provided
for those developers who might have early Alpha hardware from
DEC or other vendors and run the OSF/1 operating system. It
has not been extensively tested and both the C++ and
Objective-C languages may not work, except in a
cross-compilation environment.
The `ASSEMBLE_FILE_START' macro writes a `.verstamp' directive
containing the version of the calling sequence. Currently,
we use `9 0', which we believe will work until the official
release by DEC of their system, at which point `3 11' is the
correct value. If you get a mismatch error from the
assembler on a `.verstamp' line, consult the file
`/usr/include/stamp.h' for the present value. GNU C on the
Alpha does not support versions of DEC's OSF/1 earlier than
BL9; if you are running an older version, we suggest you ask
your DEC contact for an update.
Note that since the Alpha is a 64-bit architecture,
cross-compilers from 32-bit machines will not generate as
efficient code as that generated when the compiler is running
on a 64-bit machine because many optimizations that depend on
being able to represent a word on the target in an integral
value on the host cannot be performed.
`a29k'
AMD Am29K-family processors. These are normally used in
embedded applications. There are no standard Unix
configurations. This configuration corresponds to AMD's
standard calling sequence and binary interface and is
compatible with other 29K tools.
You may need to make a variant of the file `a29k.h' for your
particular configuration.
`a29k-*-bsd'
AMD Am29050 used in a system running a variant of BSD Unix.
`elxsi-elxsi-bsd'
The Elxsi's C compiler has known limitations that prevent it
from compiling GNU C. Please contact `mrs@cygnus.com' for
more details.
`i386-*-sco'
Compilation with RCC is recommended.
`i386-ibm-aix'
You need a version of GAS that you can get from
`tranle@intellicorp.com'.
`i386-sequent'
Go to the Berkeley universe before compiling. In addition,
you probably need to create a file named `string.h'
containing just one line: `#include <strings.h>'.
`i386-sun-sunos4'
You may find that you need another version of GNU CC to begin
bootstrapping with, since the current version when built with
the system's own compiler seems to get an infinite loop
compiling part of `libgcc2.c'. GNU CC version 2 compiled
with GNU CC (any version) seems not to have this problem.
`m68000-att'
AT&T 3b1, a.k.a. 7300 PC. Special procedures are needed to
compile GNU CC with this machine's standard C compiler, due
to bugs in that compiler. *Note 3b1 Install::. You can
bootstrap it more easily with previous versions of GNU CC if
you have them.
`m68000-hp-bsd'
HP 9000 series 200 running BSD. Note that the C compiler
that comes with this system cannot compile GNU CC; contact
`law@cs.utah.edu' to get binaries of GNU CC for bootstrapping.
`m68k-altos'
Altos 3068. You must use the GNU assembler, linker and
debugger, with COFF-encapsulation. Also, you must fix a
kernel bug. Details in the file `README.ALTOS'.
`m68k-hp-hpux'
HP 9000 series 300 or 400 running HP-UX. HP-UX version 8.0
has a bug in the assembler that prevents compilation of GNU
CC. To fix it, get patch PHCO_0800 from HP.
In addition, `--gas' does not currently work with this
configuration. Changes in HP-UX have broken the library
conversion tool and the linker.
`m68k-sun'
Sun 3. We do not provide a configuration file to use the Sun
FPA by default, because programs that establish signal
handlers for floating point traps inherently cannot work with
the FPA.
`m88k-svr3'
Motorola m88k running the AT&T/Unisoft/Motorola V.3 reference
port. These systems tend to use the Green Hills C, revision
1.8.5, as the standard C compiler. There are apparently bugs
in this compiler that result in object files differences
between stage 2 and stage 3. If this happens, make the stage
4 compiler and compare it to the stage 3 compiler. If the
stage 3 and stage 4 object files are identical, this suggests
a problem with the standard C compiler. It is best, however,
to use an older version of GNU CC for bootstrapping.
`m88k-dgux'
Motorola m88k running DG/UX. To build native or cross
compilers on DG/UX, you must first change to the 88open BCS
software development environment. This is done by issuing
this command:
eval `sde-target m88kbcs`
`mips-mips-bsd'
MIPS machines running the MIPS operating system in BSD mode.
It's possible that some old versions of the system lack the
functions `memcpy', `memcmp', and `memset'. If your system
lacks these, you must remove or undo the definition of
`TARGET_MEM_FUNCTIONS' in `mips-bsd.h'.
`mips-sony-sysv'
Sony MIPS NEWS. This works in NEWSOS 5.0.1, but not in 5.0.2
(which uses ELF instead of COFF). Support for 5.0.2 will
probably be provided soon by volunteers.
`ns32k-encore'
Encore ns32000 system. Encore systems are supported only
under BSD.
`ns32k-*-genix'
National Semiconductor ns32000 system. Genix has bugs in
`alloca' and `malloc'; you must get the compiled versions of
these from GNU Emacs.
`ns32k-sequent'
Go to the Berkeley universe before compiling. In addition,
you probably need to create a file named `string.h'
containing just one line: `#include <strings.h>'.
`ns32k-utek'
UTEK ns32000 system ("merlin"). The C compiler that comes
with this system cannot compile GNU CC; contact
`tektronix!reed!mason' to get binaries of GNU CC for
bootstrapping.
`romp-*-aos'
`romp-*-mach'
The only operating systems supported for the IBM RT PC are
AOS and MACH. GNU CC does not support AIX running on the RT.
We recommend you compile GNU CC with an earlier version of
itself; if you compile GNU CC with `hc', the Metaware
compiler, it will work, but you will get mismatches between
the stage 2 and stage 3 compilers in various files. These
errors are minor differences in some floating-point constants
and can be safely ignored; the stage 3 compiler is correct.
`rs6000-*-aix'
*Read the file `README.RS6000' for information on how to get
a fix for a problem in the IBM assembler that prevents use of
GNU CC.* You must either obtain the new assembler or avoid
using the `-g' switch. Note that `Makefile.in' uses `-g' by
default when compiling `libgcc2.c'.
`vax-dec-ultrix'
Don't try compiling with Vax C (`vcc'). It produces
incorrect code in some cases (for example, when `alloca' is
used).
Meanwhile, compiling `cp-parse.c' with pcc does not work
because of an internal table size limitation in that
compiler. To avoid this problem, compile just the GNU C
compiler first, and use it to recompile building all the
languages that you want to run.
Here we spell out what files will be set up by `configure'.
Normally you need not be concerned with these files.
* A symbolic link named `config.h' is made to the top-level
config file for the machine you plan to run the compiler on
(*note The Configuration File: (gcc.info)Config.). This file
is responsible for defining information about the host
machine. It includes `tm.h'.
The top-level config file is located in the subdirectory
`config'. Its name is always `xm-SOMETHING.h'; usually
`xm-MACHINE.h', but there are some exceptions.
If your system does not support symbolic links, you might
want to set up `config.h' to contain a `#include' command
which refers to the appropriate file.
* A symbolic link named `tconfig.h' is made to the top-level
config file for your target machine. This is used for
compiling certain programs to run on that machine.
* A symbolic link named `tm.h' is made to the
machine-description macro file for your target machine. It
should be in the subdirectory `config' and its name is often
`MACHINE.h'.
* A symbolic link named `md' will be made to the machine
description pattern file. It should be in the `config'
subdirectory and its name should be `MACHINE.md'; but MACHINE
is often not the same as the name used in the `tm.h' file
because the `md' files are more general.
* A symbolic link named `aux-output.c' will be made to the
output subroutine file for your machine. It should be in the
`config' subdirectory and its name should be `MACHINE.c'.
* The command file `configure' also constructs `Makefile' by
adding some text to the template file `Makefile.in'. The
additional text comes from files in the `config' directory,
named `t-TARGET' and `h-HOST'. If these files do not exist,
it means nothing needs to be added for a given target or host.
4. Make sure the Bison parser generator is installed. (This is
unnecessary if the Bison output files `c-parse.c' and `cexp.c' are
more recent than `c-parse.y' and `cexp.y' and you do not plan to
change the `.y' files.)
Bison versions older than Sept 8, 1988 will produce incorrect
output for `c-parse.c'.
5. Build the compiler. Just type `make LANGUAGES=c' in the compiler
directory.
`LANGUAGES=c' specifies that only the C compiler should be
compiled. The makefile normally builds compilers for all the
supported languages; currently, C, C++ and Objective C. However,
C is the only language that is sure to work when you build with
other non-GNU C compilers. In addition, building anything but C
at this stage is a waste of time.
In general, you can specify the languages to build by typing the
argument `LANGUAGES="LIST"', where LIST is one or more words from
the list `c', `c++', and `objective-c'.
Ignore any warnings you may see about "statement not reached" in
`insn-emit.c'; they are normal. Any other compilation errors may
represent bugs in the port to your machine or operating system, and
should be investigated and reported.
Some commercial compilers fail to compile GNU CC because they have
bugs or limitations. For example, the Microsoft compiler is said
to run out of macro space. Some Ultrix compilers run out of
expression space; then you need to break up the statement where
the problem happens.
If you are building with a previous GNU C compiler, do not use
`CC=gcc' on the make command or by editing the Makefile. Instead,
use a full pathname to specify the compiler, such as
`CC=/usr/local/bin/gcc'. This is because make might execute the
`gcc' in the current directory before all of the compiler
components have been built.
6. If you are using COFF-encapsulation, you must convert `libgcc.a' to
a GNU-format library at this point. See the file `README.ENCAP'
in the directory containing the GNU binary file utilities, for
directions.
7. If you are building a cross-compiler, stop here. *Note
Cross-Compiler::.
8. Move the first-stage object files and executables into a
subdirectory with this command:
make stage1
The files are moved into a subdirectory named `stage1'. Once
installation is complete, you may wish to delete these files with
`rm -r stage1'.
9. Recompile the compiler with itself, with this command:
make CC="stage1/xgcc -Bstage1/" CFLAGS="-g -O"
This is called making the stage 2 compiler.
The command shown above builds compilers for all the supported
languages. If you don't want them all, you can specify the
languages to build by typing the argument `LANGUAGES="LIST"'. LIST
should contain one or more words from the list `c', `c++',
`objective-c', and `proto'. Separate the words with spaces.
`proto' stands for the programs `protoize' and `unprotoize'; they
are not a separate language, but you use `LANGUAGES' to enable or
disable their installation.
If you are going to build the stage 3 compiler, then you might
want to build only the C language in stage 2.
Once you have built the stage 2 compiler, if you are short of disk
space, you can delete the subdirectory `stage1'.
On a 68000 or 68020 system lacking floating point hardware, unless
you have selected a `tm.h' file that expects by default that there
is no such hardware, do this instead:
make CC="stage1/xgcc -Bstage1/" CFLAGS="-g -O -msoft-float"
10. If you wish to test the compiler by compiling it with itself one
more time, do this:
make stage2
make CC="stage2/xgcc -Bstage2/" CFLAGS="-g -O"
This is called making the stage 3 compiler. Aside from the `-B'
option, the compiler options should be the same as when you made
the stage 2 compiler. But the `LANGUAGES' option need not be the
same. The command shown above builds compilers for all the
supported languages; if you don't want them all, you can specify
the languages to build by typing the argument `LANGUAGES="LIST"',
as described above.
Then compare the latest object files with the stage 2 object
files--they ought to be identical, unless they contain time stamps.
You can compare the files, disregarding the time stamps if any,
like this:
make compare
This will mention any object files that differ between stage 2 and
stage 3. Any difference, no matter how innocuous, indicates that
the stage 2 compiler has compiled GNU CC incorrectly, and is
therefore a potentially serious bug which you should investigate
and report.
If your system does not put time stamps in the object files, then
this is a faster way to compare them (using the Bourne shell):
for file in *.o; do
cmp $file stage2/$file
done
If you have built the compiler with the `-mno-mips-tfile' option on
MIPS machines, you will not be able to compare the files.
11. Install the compiler driver, the compiler's passes and run-time
support. You can use the following command:
make install CC="stage2/xgcc -Bstage2/" CFLAGS="-g -O" LANGUAGES="LIST"
(Use the same value for `CC', `CFLAGS' and `LANGUAGES' that you
used when compiling the files that are being installed. One
reason this is necessary is that some versions of Make have bugs
and recompile files gratuitously when you do this step. If you
use the same variable values, those files will be recompiled
properly.
This copies the files `cc1', `cpp' and `libgcc.a' to files `cc1',
`cpp' and `libgcc.a' in directory
`/usr/local/lib/gcc-lib/TARGET/VERSION', which is where the
compiler driver program looks for them. Here TARGET is the target
machine type specified when you ran `configure', and VERSION is
the version number of GNU CC. This naming scheme permits various
versions and/or cross-compilers to coexist.
It also copies the driver program `gcc' into the directory
`/usr/local/bin', so that it appears in typical execution search
paths.
On some systems, this command will cause recompilation of some
files. This is usually due to bugs in `make'. You should either
ignore this problem, or use GNU Make.
*Warning: there is a bug in `alloca' in the Sun library. To avoid
this bug, be sure to install the executables of GNU CC that were
compiled by GNU CC. (That is, the executables from stage 2 or 3,
not stage 1.) They use `alloca' as a built-in function and never
the one in the library.*
(It is usually better to install GNU CC executables from stage 2
or 3, since they usually run faster than the ones compiled with
some other compiler.)
12. Install the Objective C library (if you have built the Objective C
compiler). Here is the command to do this:
make install-libobjc CC="stage2/xgcc -Bstage2/" CFLAGS="-g -O"
13. Correct errors in the header files on your machine.
Various system header files often contain constructs which are
erroneous, incompatible with ANSI C or otherwise unsuitable, and
they will not work when you compile programs with GNU CC.
The most common erroneous construct is found in `ioctl.h', where a
macro expects argument values to be substituted for argument names
inside of character constants--something not done in ANSI C. This
particular problem can be prevented by using `-traditional'. Other
problems are not so easy to work around.
GNU CC comes with shell scripts to fix known header file problems.
They install corrected copies of various header files in a
special directory where only GNU CC will normally look for them.
The scripts adapt to various systems by searching all the system
header files for the problem cases that we know about.
Use the following command to do this:
make install-fixincludes
If you selected a different directory for GNU CC installation when
you installed it, by specifying the Make variable `prefix' or
`libdir', specify it the same way in this command.
Note that some systems are starting to come with ANSI C system
header files. On these systems, don't run `install-fixincludes';
it may not work, and is certainly not necessary. One exception:
there are is a special script for System V release 4, which you
should run.
It is not the purpose of `install-fixincludes' to add prototypes to
the system header files. We support headers with ANSI C
prototypes in the GNU C Library, and we have no time to support
adding them to other systems' header files.
14. If you're going to use C++, it's likely that you need to also
install the `libg++' distribution. It should be available from
the same place where you got the GCC distribution. Just as GCC
does not distribute a C runtime library, it also does not include
a C++ run-time library. All I/O functionality, special class
libraries, etc., are available in the `libg++' distribution.
If you cannot install the compiler's passes and run-time support in
`/usr/local/lib', you can alternatively use the `-B' option to specify
a prefix by which they may be found. The compiler concatenates the
prefix with the names `cpp', `cc1' and `libgcc.a'. Thus, you can put
the files in a directory `/usr/foo/gcc' and specify `-B/usr/foo/gcc/'
when you run GNU CC.
Also, you can specify an alternative default directory for these
files by setting the Make variable `libdir' when you make GNU CC.
Compilation in a Separate Directory
====================================
If you wish to build the object files and executables in a directory
other than the one containing the source files, here is what you must
do differently:
1. Make sure you have a version of Make that supports the `VPATH'
feature. (GNU Make supports it, as do Make versions on most BSD
systems.)
2. If you have ever run `configure' in the source directory, you must
undo the configuration. Do this by running:
make distclean
3. Go to the directory in which you want to build the compiler before
running `configure':
mkdir gcc-sun3
cd gcc-sun3
On systems that do not support symbolic links, this directory must
be on the same file system as the source code directory.
4. Specify where to find `configure' when you run it:
../gcc/configure ...
This also tells `configure' where to find the compiler sources;
`configure' takes the directory from the file name that was used to
invoke it. But if you want to be sure, you can specify the source
directory with the `--srcdir' option, like this:
../gcc/configure --srcdir=../gcc sun3
The directory you specify with `--srcdir' need not be the same as
the one that `configure' is found in.
Now, you can run `make' in that directory. You need not repeat the
configuration steps shown above, when ordinary source files change. You
must, however, run `configure' again when the configuration files
change, if your system does not support symbolic links.
Building and Installing a Cross-Compiler
=========================================
GNU CC can function as a cross-compiler for many machines, but not
all.
* Cross-compilers for the Mips as target do not work because the
auxiliary programs `mips-tdump.c' and `mips-tfile.c' can't be
compiled on anything but a Mips.
* Cross-compilers to or from the Vax probably don't work completely
because the Vax uses an incompatible floating point format (not
IEEE format).
Since GNU CC generates assembler code, you probably need a
cross-assembler that GNU CC can run, in order to produce object files.
If you want to link on other than the target machine, you need a
cross-linker as well. You also need header files and libraries suitable
for the target machine that you can install on the host machine.
To build GNU CC as a cross-compiler, you start out by running
`configure'. You must specify two different configurations, the host
and the target. Use the `--host=HOST' option for the host and
`--target=TARGET' to specify the target type. For example, here is how
to configure for a cross-compiler that runs on a hypothetical Intel 386
system and produces code for an HP 68030 system running BSD:
configure --target=m68k-hp-bsd4.3 --host=i386-bozotheclone-bsd4.3
Next you should install the cross-assembler and cross-linker (and
`ar' and `ranlib'). Put them in the directory `/usr/local/TARGET/bin'.
The installation of GNU CC will find them there and copy or link them
to the proper place to find them when you run the cross-compiler later.
If you want to install any additional libraries to use with the
cross-compiler, put them in the directory `/usr/local/TARGET/lib'; all
files in that subdirectory will be installed in the proper place when
you install the cross-compiler. Likewise, put the header files for the
target machine in `/usr/local/TARGET/include'.
You must now produce a substitute for `libgcc1.a'. Normally this
file is compiled with the "native compiler" for the target machine;
compiling it with GNU CC does not work. But compiling it with the host
machine's compiler also doesn't work--that produces a file that would
run on the host, and you need it to run on the target.
We can't give you any automatic way to produce this substitute. For
some targets, the subroutines in `libgcc1.c' are not actually used. You
need not provide the ones that won't be used. The ones that most
commonly are used are the multiplication, division and remainder
routines--many RISC machines rely on the library for this. One way to
make them work is to define the appropriate `perform_...' macros for
the subroutines that you need. If these definitions do not use the C
arithmetic operators that they are meant to implement, you might be
able to compile them with the cross-compiler you are building. To do
this, specify `LIBGCC1=libgcc1.a OLDCC=./xgcc' when building the
compiler.
Now you can proceed just as for compiling a single-machine compiler
through the step of building stage 1. If you have not provided some
sort of `libgcc1.a', then compilation will give up at the point where
it needs that file, printing a suitable error message. If you do
provide `libgcc1.a', then building the compiler will automatically
compile and link a test program called `cross-test'; if you get errors
in the linking, it means that not all of the necessary routines in
`libgcc1.a' are available.
When you are using a cross-compiler configuration, building stage 1
does not compile all of GNU CC. This is because one part of building,
the compilation of `libgcc2.c', requires use of the cross-compiler.
However, when you type `make install' to install the bulk of the
cross-compiler, that will also compile `libgcc2.c' and install the
resulting `libgcc.a'.
Do not try to build stage 2 for a cross-compiler. It doesn't work to
rebuild GNU CC as a cross-compiler using the cross-compiler, because
that would produce a program that runs on the target machine, not on the
host. For example, if you compile a 386-to-68030 cross-compiler with
itself, the result will not be right either for the 386 (because it was
compiled into 68030 code) or for the 68030 (because it was configured
for a 386 as the host). If you want to compile GNU CC into 68030 code,
whether you compile it on a 68030 or with a cross-compiler on a 386, you
must specify a 68030 as the host when you configure it.
Installing GNU CC on the HP Precision Architecture
===================================================
There are two variants of this CPU, called 1.0 and 1.1, which have
different machine descriptions. You must use the right one for your
machine. All 7NN machines and 8N7 machines use 1.1, while all other
8NN machines use 1.0.
The easiest way to handle this problem is to use `configure hpNNN'
or `configure hpNNN-hpux', where NNN is the model number of the
machine. Then `configure' will figure out if the machine is a 1.0 or
1.1. Use `uname -a' to find out the model number of your machine.
`-g' does not work on HP-UX, since that system uses a peculiar
debugging format which GNU CC does not know about. There are
preliminary versions of GAS and GDB for the HP-PA which do work with
GNU CC for debugging. You can get them by anonymous ftp from
`jaguar.cs.utah.edu' `dist' subdirectory. You would need to install
GAS in the file
/usr/local/lib/gcc-lib/CONFIGURATION/GCCVERSION/as
where CONFIGURATION is the configuration name (perhaps `hpNNN-hpux')
and GCCVERSION is the GNU CC version number. Do this *before* starting
the build process, otherwise you will get errors from the HPUX
assembler while building `libgcc2.a'. The command
make install-dir
will create the necessary directory hierarchy so you can install GAS
before building GCC.
If you obtained GAS before October 6, 1992 it is highly recommended
you get a new one to avoid several bugs which have been discovered
recently.
To enable debugging, configure GNU CC with the `--gas' option before
building.
Installing GNU CC on the Sun
=============================
Make sure the environment variable `FLOAT_OPTION' is not set when
you compile `libgcc.a'. If this option were set to `f68881' when
`libgcc.a' is compiled, the resulting code would demand to be linked
with a special startup file and would not link properly without special
pains.
There is a bug in `alloca' in certain versions of the Sun library.
To avoid this bug, install the binaries of GNU CC that were compiled by
GNU CC. They use `alloca' as a built-in function and never the one in
the library.
Some versions of the Sun compiler crash when compiling GNU CC. The
problem is a segmentation fault in cpp. This problem seems to be due to
the bulk of data in the environment variables. You may be able to avoid
it by using the following command to compile GNU CC with Sun CC:
make CC="TERMCAP=x OBJS=x LIBFUNCS=x STAGESTUFF=x cc"
Installing GNU CC on the 3b1
=============================
Installing GNU CC on the 3b1 is difficult if you do not already have
GNU CC running, due to bugs in the installed C compiler. However, the
following procedure might work. We are unable to test it.
1. Comment out the `#include "config.h"' line on line 37 of `cccp.c'
and do `make cpp'. This makes a preliminary version of GNU cpp.
2. Save the old `/lib/cpp' and copy the preliminary GNU cpp to that
file name.
3. Undo your change in `cccp.c', or reinstall the original version,
and do `make cpp' again.
4. Copy this final version of GNU cpp into `/lib/cpp'.
5. Replace every occurrence of `obstack_free' in the file `tree.c'
with `_obstack_free'.
6. Run `make' to get the first-stage GNU CC.
7. Reinstall the original version of `/lib/cpp'.
8. Now you can compile GNU CC with itself and install it in the normal
fashion.
Installing GNU CC on Unos
==========================
Use `configure unos' for building on Unos.
The Unos assembler is named `casm' instead of `as'. For some
strange reason linking `/bin/as' to `/bin/casm' changes the behavior,
and does not work. So, when installing GNU CC, you should install the
following script as `as' in the subdirectory where the passes of GCC
are installed:
#!/bin/sh
casm $*
The default Unos library is named `libunos.a' instead of `libc.a'.
To allow GNU CC to function, either change all references to `-lc' in
`gcc.c' to `-lunos' or link `/lib/libc.a' to `/lib/libunos.a'.
When compiling GNU CC with the standard compiler, to overcome bugs in
the support of `alloca', do not use `-O' when making stage 2. Then use
the stage 2 compiler with `-O' to make the stage 3 compiler. This
compiler will have the same characteristics as the usual stage 2
compiler on other systems. Use it to make a stage 4 compiler and
compare that with stage 3 to verify proper compilation.
(Perhaps simply defining `ALLOCA' in `x-crds' as described in the
comments there will make the above paragraph superfluous. Please
inform us of whether this works.)
Unos uses memory segmentation instead of demand paging, so you will
need a lot of memory. 5 Mb is barely enough if no other tasks are
running. If linking `cc1' fails, try putting the object files into a
library and linking from that library.
Installing GNU CC on VMS
=========================
The VMS version of GNU CC is distributed in a backup saveset
containing both source code and precompiled binaries.
To install the `gcc' command so you can use the compiler easily, in
the same manner as you use the VMS C compiler, you must install the VMS
CLD file for GNU CC as follows:
1. Define the VMS logical names `GNU_CC' and `GNU_CC_INCLUDE' to
point to the directories where the GNU CC executables
(`gcc-cpp.exe', `gcc-cc1.exe', etc.) and the C include files are
kept respectively. This should be done with the commands:
$ assign /system /translation=concealed -
disk:[gcc.] gnu_cc
$ assign /system /translation=concealed -
disk:[gcc.include.] gnu_cc_include
with the appropriate disk and directory names. These commands can
be placed in your system startup file so they will be executed
whenever the machine is rebooted. You may, if you choose, do this
via the `GCC_INSTALL.COM' script in the `[GCC]' directory.
2. Install the `GCC' command with the command line:
$ set command /table=sys$common:[syslib]dcltables -
/output=sys$common:[syslib]dcltables gnu_cc:[000000]gcc
$ install replace sys$common:[syslib]dcltables
3. To install the help file, do the following:
$ library/help sys$library:helplib.hlb gcc.hlp
Now you can invoke the compiler with a command like `gcc /verbose
file.c', which is equivalent to the command `gcc -v -c file.c' in
Unix.
If you wish to use GNU C++ you must first install GNU CC, and then
perform the following steps:
1. Define the VMS logical name `GNU_GXX_INCLUDE' to point to the
directory where the preprocessor will search for the C++ header
files. This can be done with the command:
$ assign /system /translation=concealed -
disk:[gcc.gxx_include.] gnu_gxx_include
with the appropriate disk and directory name. If you are going to
be using libg++, this is where the libg++ install procedure will
install the libg++ header files.
2. Obtain the file `gcc-cc1plus.exe', and place this in the same
directory that `gcc-cc1.exe' is kept.
The GNU C++ compiler can be invoked with a command like `gcc /plus
/verbose file.cc', which is equivalent to the command `g++ -v -c
file.cc' in Unix.
We try to put corresponding binaries and sources on the VMS
distribution tape. But sometimes the binaries will be from an older
version than the sources, because we don't always have time to update
them. (Use the `/version' option to determine the version number of
the binaries and compare it with the source file `version.c' to tell
whether this is so.) In this case, you should use the binaries you get
to recompile the sources. If you must recompile, here is how:
1. Execute the command procedure `vmsconfig.com' to copy files
`vax-vms.h', `xm-vax-vms.h', `vax.c' and `vax.md' to `tm.h',
`config.h', `aux-output.c', and `md.' respectively, and to create
files `tconfig.h' and `hconfig.h'. This procedure also creates
several linker option files used by `make-cc1.com' and a data file
used by `make-l2.com'.
$ @vmsconfig.com
2. Setup the logical names and command tables as defined above. In
addition, define the VMS logical name `GNU_BISON' to point at the
to the directories where the Bison executable is kept. This
should be done with the command:
$ assign /system /translation=concealed -
disk:[bison.] gnu_bison
You may, if you choose, use the `INSTALL_BISON.COM' script in the
`[BISON]' directory.
3. Install the `BISON' command with the command line:
$ set command /table=sys$common:[syslib]dcltables -
/output=sys$common:[syslib]dcltables -
gnu_bison:[000000]bison
$ install replace sys$common:[syslib]dcltables
4. Type `@make-gcc' to recompile everything (alternatively, you may
submit the file `make-gcc.com' to a batch queue). If you wish to
build the GNU C++ compiler as well as the GNU CC compiler, you must
first edit `make-gcc.com' and follow the instructions that appear
in the comments.
5. In order to use GCC, you need a library of functions which GCC
compiled code will call to perform certain tasks, and these
functions are defined in the file `libgcc2.c'. To compile this
you should use the command procedure `make-l2.com', which will
generate the library `libgcc2.olb'. `libgcc2.olb' should be built
using the compiler built from the same distribution that
`libgcc2.c' came from, and `make-gcc.com' will automatically do
all of this for you.
To install the library, use the following commands:
$ library gnu_cc:[000000]gcclib/delete=(new,eprintf)
$ library libgcc2/extract=*/output=libgcc2.obj
$ library gnu_cc:[000000]gcclib libgcc2.obj
The first command simply removes old modules that will be replaced
with modules from libgcc2. If the VMS librarian complains about
those modules not being present, simply ignore the message and
continue on with the next command.
Whenever you update the compiler on your system, you should also
update the library with the above procedure.
6. You may wish to build GCC in such a way that no files are written
to the directory where the source files reside. An example would
be the when the source files are on a read-only disk. In these
cases, execute the following DCL commands (substituting your
actual path names):
$ assign dua0:[gcc.build_dir.]/translation=concealed, -
dua1:[gcc.source_dir.]/translation=concealed gcc_build
$ set default gcc_build:[000000]
where `dua1:[gcc.source_dir]' contains the source code, and
`dua0:[gcc.build_dir]' is meant to contain all of the generated
object files and executables. Once you have done this, you can
proceed building GCC as described above. (Keep in mind that
`gcc_build' is a rooted logical name, and thus the device names in
each element of the search list must be an actual physical device
name rather than another rooted logical name).
7. *If you are building GNU CC with a previous version of GNU CC, you
also should check to see that you have the newest version of the
assembler*. In particular, GNU CC version 2 treats global constant
variables slightly differently from GNU CC version 1, and GAS
version 1.38.1 does not have the patches required to work with GCC
version 2. If you use GAS 1.38.1, then `extern const' variables
will not have the read-only bit set, and the linker will generate
warning messages about mismatched psect attributes for these
variables. These warning messages are merely a nuisance, and can
safely be ignored.
If you are compiling with a version of GNU CC older than 1.33,
specify `/DEFINE=("inline=")' as an option in all the
compilations. This requires editing all the `gcc' commands in
`make-cc1.com'. (The older versions had problems supporting
`inline'.) Once you have a working 1.33 or newer GNU CC, you can
change this file back.
8. If you want to build GNU CC with the VAX C compiler, you will need
to make minor changes in `make-cccp.com' and `make-cc1.com' to
choose alternate definitions of `CC', `CFLAGS', and `LIBS'. See
comments in those files. However, you must also have a working
version of the GNU assembler (GNU as, aka GAS) as it is used as
the back-end for GNU CC to produce binary object modules and is
not included in the GNU CC sources. GAS is also needed to compile
`libgcc2' in order to build `gcclib' (see above); `make-l2.com'
expects to be able to find it operational in
`gnu_cc:[000000]gnu-as.exe'.
To use GNU CC on VMS, you need the VMS driver programs `gcc.exe',
`gcc.com', and `gcc.cld'. They are distributed with the VMS
binaries (`gcc-vms') rather than the GNU CC sources. GAS is also
included in `gcc-vms', as is Bison.
Once you have successfully built GNU CC with VAX C, you should use
the resulting compiler to rebuild itself. Before doing this, be
sure to restore the `CC', `CFLAGS', and `LIBS' definitions in
`make-cccp.com' and `make-cc1.com'. The second generation
compiler will be able to take advantage of many optimizations that
must be suppressed when building with other compilers.
Under previous versions of GNU CC, the generated code would
occasionally give strange results when linked with the sharable
`VAXCRTL' library. Now this should work.
Even with this version, however, GNU CC itself should not be linked
with the sharable `VAXCRTL'. The version of `qsort' in `VAXCRTL' has a
bug (known to be present in VMS versions V4.6 through V5.5) which
causes the compiler to fail.
The executables that are generated by `make-cc1.com' and
`make-cccp.com' use the object library version of `VAXCRTL' in order to
make use of the `qsort' routine in `gcclib.olb'. If you wish to link
the compiler executables with the shareable image version of `VAXCRTL',
you should edit the file `tm.h' (created by `vmsconfig.com') to define
the macro `QSORT_WORKAROUND'.
`QSORT_WORKAROUND' is always defined when GNU CC is compiled with
VAX C, to avoid a problem in case `gcclib.olb' is not yet available.
Installing GNU CC on the WE32K
===============================
These computers are also known as the 3b2, 3b5, 3b20 and other
similar names. (However, the 3b1 is actually a 68000; see *Note 3b1
Install::.)
Don't use `-g' when compiling with the system's compiler. The
system's linker seems to be unable to handle such a large program with
debugging information.
The system's compiler runs out of capacity when compiling `stmt.c'
in GNU CC. You can work around this by building `cpp' in GNU CC first,
then use that instead of the system's preprocessor with the system's C
compiler to compile `stmt.c'. Here is how:
mv /lib/cpp /lib/cpp.att
cp cpp /lib/cpp.gnu
echo "/lib/cpp.gnu -traditional $*" > /lib/cpp
chmod +x /lib/cpp
The system's compiler produces bad code for some of the GNU CC
optimization files. So you must build the stage 2 compiler without
optimization. Then build a stage 3 compiler with optimization. That
executable should work. Here are the necessary commands:
make LANGUAGES=c CC=stage1/xgcc CFLAGS="-Bstage1/ -g"
make stage2
make CC=stage2/xgcc CFLAGS="-Bstage2/ -g -O"
You may need to raise the ULIMIT setting to build a C++ compiler, as
the file `cc1plus' is larger than one megabyte.
Installing GNU CC on the MIPS
==============================
See *Note Installation:: about whether to use `--with-stabs' or not.
The MIPS C compiler needs to be told to increase its table size for
switch statements with the `-Wf,-XNg1500' option in order to compile
`cp-parse.c'. If you use the `-O2' optimization option, you also need
to use `-Olimit 3000'. Both of these options are automatically
generated in the `Makefile' that the shell script `configure' builds.
If you override the `CC' make variable and use the MIPS compilers, you
may need to add `-Wf,-XNg1500 -Olimit 3000'.
MIPS computers running RISC-OS can support four different
personalities: default, BSD 4.3, System V.3, and System V.4 (older
versions of RISC-OS don't support V.4). To configure GCC for these
platforms use the following configurations:
`mips-mips-riscos`rev''
Default configuration for RISC-OS, revision `rev'.
`mips-mips-riscos`rev'bsd'
BSD 4.3 configuration for RISC-OS, revision `rev'.
`mips-mips-riscos`rev'sysv4'
System V.4 configuration for RISC-OS, revision `rev'.
`mips-mips-riscos`rev'sysv'
System V.3 configuration for RISC-OS, revision `rev'.
The revision `rev' mentioned above is the revision of RISC-OS to
use. You must reconfigure GCC when going from a RISC-OS revision 4 to
RISC-OS revision 5. This has the effect of avoiding a linker bug.
DECstations can support three different personalities: Ultrix, DEC
OSF/1, and OSF/rose. To configure GCC for these platforms use the
following configurations:
`decstation-ultrix'
Ultrix configuration.
`decstation-osf1'
Dec's version of OSF/1.
`decstation-osfrose'
Open Software Foundation reference port of OSF/1 which uses the
OSF/rose object file format instead of ECOFF. Normally, you would
not select this configuration.