4.4BSD/usr/src/contrib/gcc-2.3.3/config/alpha.h
/* Definitions of target machine for GNU compiler, for DEC Alpha.
Copyright (C) 1992 Free Software Foundation, Inc.
Contributed by Richard Kenner (kenner@nyu.edu)
This file is part of GNU CC.
GNU CC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
GNU CC is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with GNU CC; see the file COPYING. If not, write to
the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
/* Names to predefine in the preprocessor for this target machine. */
#define CPP_PREDEFINES "\
-Dunix -D__osf__ -D__alpha -D__alpha__ -D_LONGLONG -DSYSTYPE_BSD \
-D_SYSTYPE_BSD"
/* Write out the correct language type definition for the header files. */
#define CPP_SPEC "\
%{.c: -D__LANGUAGE_C__ -D__LANGUAGE_C %{!ansi:-DLANGUAGE_C}} \
%{.h: -D__LANGUAGE_C__ -D__LANGUAGE_C %{!ansi:-DLANGUAGE_C}} \
%{.S: -D__LANGUAGE_ASSEMBLY__ -D__LANGUAGE_ASSEMBLY %{!ansi:-DLANGUAGE_ASSEMBLY}} \
%{.cc: -D__LANGUAGE_C_PLUS_PLUS__ -D__LANGUAGE_C_PLUS_PLUS} \
%{.cxx: -D__LANGUAGE_C_PLUS_PLUS__ -D__LANGUAGE_C_PLUS_PLUS} \
%{.C: -D__LANGUAGE_C_PLUS_PLUS__ -D__LANGUAGE_C_PLUS_PLUS} \
%{.m: -D__LANGUAGE_OBJECTIVE_C__ -D__LANGUAGE_OBJECTIVE_C}"
/* Set the spec to use for signed char. The default tests the above macro
but DEC's compiler can't handle the conditional in a "constant"
operand. */
#define SIGNED_CHAR_SPEC "%{funsigned-char:-D__CHAR_UNSIGNED__}"
/* No point in running CPP on our assembler output. */
#define ASM_SPEC "-nocpp"
/* Right now Alpha OSF/1 doesn't seem to have debugging or profiled
libraries. */
#define LIB_SPEC "-lc"
/* Print subsidiary information on the compiler version in use. */
#define TARGET_VERSION
/* Define the location for the startup file on OSF/1 for Alpha. */
#define MD_STARTFILE_PREFIX "/usr/lib/cmplrs/cc/"
/* Run-time compilation parameters selecting different hardware subsets. */
extern int target_flags;
/* This means that floating-point support exists in the target implementation
of the Alpha architecture. This is usually the default. */
#define TARGET_FP (target_flags & 1)
/* This means that floating-point registers are allowed to be used. Note
that Alpha implementations without FP operations are required to
provide the FP registers. */
#define TARGET_FPREGS (target_flags & 2)
/* Macro to define tables used to set the flags.
This is a list in braces of pairs in braces,
each pair being { "NAME", VALUE }
where VALUE is the bits to set or minus the bits to clear.
An empty string NAME is used to identify the default VALUE. */
#define TARGET_SWITCHES \
{ {"no-soft-float", 1}, \
{"soft-float", -1}, \
{"fp-regs", 2}, \
{"no-fp-regs", -3}, \
{"", TARGET_DEFAULT} }
#define TARGET_DEFAULT 3
/* Define this macro to change register usage conditional on target flags.
On the Alpha, we use this to disable the floating-point registers when
they don't exist. */
#define CONDITIONAL_REGISTER_USAGE \
if (! TARGET_FPREGS) \
for (i = 32; i < 64; i++) \
fixed_regs[i] = call_used_regs[i] = 1;
/* Define this to change the optimizations performed by default. */
#define OPTIMIZATION_OPTIONS(LEVEL) \
{ \
if ((LEVEL) > 0) \
{ \
flag_force_addr = 1; \
flag_force_mem = 1; \
flag_omit_frame_pointer = 1; \
} \
}
/* target machine storage layout */
/* Define the size of `int'. The default is the same as the word size. */
#define INT_TYPE_SIZE 32
/* Define the size of `long long'. The default is the twice the word size. */
#define LONG_LONG_TYPE_SIZE 64
/* The two floating-point formats we support are S-floating, which is
4 bytes, and T-floating, which is 8 bytes. `float' is S and `double'
and `long double' are T. */
#define FLOAT_TYPE_SIZE 32
#define DOUBLE_TYPE_SIZE 64
#define LONG_DOUBLE_TYPE_SIZE 64
#define WCHAR_TYPE "short unsigned int"
#define WCHAR_TYPE_SIZE 16
/* Define this macro if it is advisible to hold scalars in registers
in a wider mode than that declared by the program. In such cases,
the value is constrained to be within the bounds of the declared
type, but kept valid in the wider mode. The signedness of the
extension may differ from that of the type.
For Alpha, we always store objects in a full register. 32-bit objects
are always sign-extended, but smaller objects retain their signedness. */
#define PROMOTE_MODE(MODE,UNSIGNEDP,TYPE) \
if (GET_MODE_CLASS (MODE) == MODE_INT \
&& GET_MODE_SIZE (MODE) < UNITS_PER_WORD) \
{ \
if ((MODE) == SImode) \
(UNSIGNEDP) = 0; \
(MODE) = DImode; \
}
/* Define this if function arguments should also be promoted using the above
procedure. */
#define PROMOTE_FUNCTION_ARGS
/* Likewise, if the function return value is promoted. */
#define PROMOTE_FUNCTION_RETURN
/* Define this if most significant bit is lowest numbered
in instructions that operate on numbered bit-fields.
There are no such instructions on the Alpha, but the documentation
is little endian. */
#define BITS_BIG_ENDIAN 0
/* Define this if most significant byte of a word is the lowest numbered.
This is false on the Alpha. */
#define BYTES_BIG_ENDIAN 0
/* Define this if most significant word of a multiword number is lowest
numbered.
For Alpha we can decide arbitrarily since there are no machine instructions
for them. Might as well be consistent with bytes. */
#define WORDS_BIG_ENDIAN 0
/* number of bits in an addressable storage unit */
#define BITS_PER_UNIT 8
/* Width in bits of a "word", which is the contents of a machine register.
Note that this is not necessarily the width of data type `int';
if using 16-bit ints on a 68000, this would still be 32.
But on a machine with 16-bit registers, this would be 16. */
#define BITS_PER_WORD 64
/* Width of a word, in units (bytes). */
#define UNITS_PER_WORD 8
/* Width in bits of a pointer.
See also the macro `Pmode' defined below. */
#define POINTER_SIZE 64
/* Allocation boundary (in *bits*) for storing arguments in argument list. */
#define PARM_BOUNDARY 64
/* Boundary (in *bits*) on which stack pointer should be aligned. */
#define STACK_BOUNDARY 64
/* Allocation boundary (in *bits*) for the code of a function. */
#define FUNCTION_BOUNDARY 64
/* Alignment of field after `int : 0' in a structure. */
#define EMPTY_FIELD_BOUNDARY 64
/* Every structure's size must be a multiple of this. */
#define STRUCTURE_SIZE_BOUNDARY 8
/* A bitfield declared as `int' forces `int' alignment for the struct. */
#define PCC_BITFIELD_TYPE_MATTERS 1
/* Align loop starts for optimal branching.
Don't do this until they fix the assembler. */
/* #define ASM_OUTPUT_LOOP_ALIGN(FILE) \
ASM_OUTPUT_ALIGN (FILE, 5) */
/* This is how to align an instruction for optimal branching.
On Alpha we'll get better performance by aligning on a quadword
boundary. */
#define ASM_OUTPUT_ALIGN_CODE(FILE) \
ASM_OUTPUT_ALIGN ((FILE), 4)
/* No data type wants to be aligned rounder than this. */
#define BIGGEST_ALIGNMENT 64
/* Make strings word-aligned so strcpy from constants will be faster. */
#define CONSTANT_ALIGNMENT(EXP, ALIGN) \
(TREE_CODE (EXP) == STRING_CST \
&& (ALIGN) < BITS_PER_WORD ? BITS_PER_WORD : (ALIGN))
/* Make arrays of chars word-aligned for the same reasons. */
#define DATA_ALIGNMENT(TYPE, ALIGN) \
(TREE_CODE (TYPE) == ARRAY_TYPE \
&& TYPE_MODE (TREE_TYPE (TYPE)) == QImode \
&& (ALIGN) < BITS_PER_WORD ? BITS_PER_WORD : (ALIGN))
/* Set this non-zero if move instructions will actually fail to work
when given unaligned data.
Since we get an error message when we do one, call them invalid. */
#define STRICT_ALIGNMENT 1
/* Set this non-zero if unaligned move instructions are extremely slow.
On the Alpha, they trap. */
/* #define SLOW_UNALIGNED_ACCESS 1 */
/* Standard register usage. */
/* Number of actual hardware registers.
The hardware registers are assigned numbers for the compiler
from 0 to just below FIRST_PSEUDO_REGISTER.
All registers that the compiler knows about must be given numbers,
even those that are not normally considered general registers.
We define all 32 integer registers, even though $31 is always zero,
and all 32 floating-point registers, even though $f31 is also
always zero. We do not bother defining the FP status register and
there are no other registers. */
#define FIRST_PSEUDO_REGISTER 64
/* 1 for registers that have pervasive standard uses
and are not available for the register allocator. */
#define FIXED_REGISTERS \
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, \
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1 }
/* 1 for registers not available across function calls.
These must include the FIXED_REGISTERS and also any
registers that can be used without being saved.
The latter must include the registers where values are returned
and the register where structure-value addresses are passed.
Aside from that, you can include as many other registers as you like. */
#define CALL_USED_REGISTERS \
{1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, \
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, \
1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, \
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 }
/* List the order in which to allocate registers. Each register must be
listed once, even those in FIXED_REGISTERS.
We allocate in the following order:
$f1 (nonsaved floating-point register)
$f10-$f15 (likewise)
$f22-$f30 (likewise)
$f21-$f16 (likewise, but input args)
$f0 (nonsaved, but return value)
$f2-$f9 (saved floating-point registers)
$1-$8 (nonsaved integer registers)
$22-$25 (likewise)
$28 (likewise)
$0 (likewise, but return value)
$21-$16 (likewise, but input args)
$27 (procedure value)
$9-$14 (saved integer registers)
$26 (return PC)
$15 (frame pointer)
$29 (global pointer)
$30, $31, $f31 (stack pointer and always zero) */
#define REG_ALLOC_ORDER \
{33, \
42, 43, 44, 45, \
54, 55, 56, 57, 58, 59, 60, 61, 62, \
53, 52, 51, 50, 49, 48, \
32, \
34, 35, 36, 37, 38, 39, 40, 41, \
1, 2, 3, 4, 5, 6, 7, 8, \
22, 23, 24, 25, \
28, \
0, \
21, 20, 19, 18, 17, 16, \
27, \
9, 10, 11, 12, 13, 14, \
26, \
15, \
29, \
30, 31, 63 }
/* Return number of consecutive hard regs needed starting at reg REGNO
to hold something of mode MODE.
This is ordinarily the length in words of a value of mode MODE
but can be less for certain modes in special long registers. */
#define HARD_REGNO_NREGS(REGNO, MODE) \
((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD)
/* Value is 1 if hard register REGNO can hold a value of machine-mode MODE.
On Alpha, the integer registers can hold any mode. The floating-point
registers can hold 32-bit and 64-bit integers as well, but not 16-bit
or 8-bit values. If we only allowed the larger integers into FP registers,
we'd have to say that QImode and SImode aren't tiable, which is a
pain. So say all registers can hold everything and see how that works. */
#define HARD_REGNO_MODE_OK(REGNO, MODE) 1
/* Value is 1 if it is a good idea to tie two pseudo registers
when one has mode MODE1 and one has mode MODE2.
If HARD_REGNO_MODE_OK could produce different values for MODE1 and MODE2,
for any hard reg, then this must be 0 for correct output. */
#define MODES_TIEABLE_P(MODE1, MODE2) 1
/* Specify the registers used for certain standard purposes.
The values of these macros are register numbers. */
/* Alpha pc isn't overloaded on a register that the compiler knows about. */
/* #define PC_REGNUM */
/* Register to use for pushing function arguments. */
#define STACK_POINTER_REGNUM 30
/* Base register for access to local variables of the function. */
#define FRAME_POINTER_REGNUM 15
/* Value should be nonzero if functions must have frame pointers.
Zero means the frame pointer need not be set up (and parms
may be accessed via the stack pointer) in functions that seem suitable.
This is computed in `reload', in reload1.c. */
#define FRAME_POINTER_REQUIRED 0
/* Base register for access to arguments of the function. */
#define ARG_POINTER_REGNUM 15
/* Register in which static-chain is passed to a function.
For the Alpha, this is based on an example; the calling sequence
doesn't seem to specify this. */
#define STATIC_CHAIN_REGNUM 1
/* Register in which address to store a structure value
arrives in the function. On the Alpha, the address is passed
as a hidden argument. */
#define STRUCT_VALUE 0
/* Define the classes of registers for register constraints in the
machine description. Also define ranges of constants.
One of the classes must always be named ALL_REGS and include all hard regs.
If there is more than one class, another class must be named NO_REGS
and contain no registers.
The name GENERAL_REGS must be the name of a class (or an alias for
another name such as ALL_REGS). This is the class of registers
that is allowed by "g" or "r" in a register constraint.
Also, registers outside this class are allocated only when
instructions express preferences for them.
The classes must be numbered in nondecreasing order; that is,
a larger-numbered class must never be contained completely
in a smaller-numbered class.
For any two classes, it is very desirable that there be another
class that represents their union. */
enum reg_class { NO_REGS, GENERAL_REGS, FLOAT_REGS, ALL_REGS,
LIM_REG_CLASSES };
#define N_REG_CLASSES (int) LIM_REG_CLASSES
/* Give names of register classes as strings for dump file. */
#define REG_CLASS_NAMES \
{"NO_REGS", "GENERAL_REGS", "FLOAT_REGS", "ALL_REGS" }
/* Define which registers fit in which classes.
This is an initializer for a vector of HARD_REG_SET
of length N_REG_CLASSES. */
#define REG_CLASS_CONTENTS \
{ {0, 0}, {~0, 0}, {0, ~0}, {~0, ~0} }
/* The same information, inverted:
Return the class number of the smallest class containing
reg number REGNO. This could be a conditional expression
or could index an array. */
#define REGNO_REG_CLASS(REGNO) ((REGNO) >= 32 ? FLOAT_REGS : GENERAL_REGS)
/* The class value for index registers, and the one for base regs. */
#define INDEX_REG_CLASS NO_REGS
#define BASE_REG_CLASS GENERAL_REGS
/* Get reg_class from a letter such as appears in the machine description. */
#define REG_CLASS_FROM_LETTER(C) \
((C) == 'f' ? FLOAT_REGS : NO_REGS)
/* Define this macro to change register usage conditional on target flags. */
/* #define CONDITIONAL_REGISTER_USAGE */
/* The letters I, J, K, L, M, N, O, and P in a register constraint string
can be used to stand for particular ranges of immediate operands.
This macro defines what the ranges are.
C is the letter, and VALUE is a constant value.
Return 1 if VALUE is in the range specified by C.
For Alpha:
`I' is used for the range of constants most insns can contain.
`J' is the constant zero.
`K' is used for the constant in an LDA insn.
`L' is used for the constant in a LDAH insn.
`M' is used for the constants that can be AND'ed with using a ZAP insn.
`N' is used for complemented 8-bit constants.
`O' is used for negated 8-bit constants.
`P' is used for the constants 1, 2 and 3. */
#define CONST_OK_FOR_LETTER_P(VALUE, C) \
((C) == 'I' ? (unsigned HOST_WIDE_INT) (VALUE) < 0x100 \
: (C) == 'J' ? (VALUE) == 0 \
: (C) == 'K' ? (unsigned HOST_WIDE_INT) ((VALUE) + 0x8000) < 0x10000 \
: (C) == 'L' ? (((VALUE) & 0xffff) == 0 \
&& (((VALUE)) >> 31 == -1 || (VALUE) >> 31 == 0)) \
: (C) == 'M' ? zap_mask (VALUE) \
: (C) == 'N' ? (unsigned HOST_WIDE_INT) (~ (VALUE)) < 0x100 \
: (C) == 'O' ? (unsigned HOST_WIDE_INT) (- (VALUE)) < 0x100 \
: (C) == 'P' ? (VALUE) == 1 || (VALUE) == 2 || (VALUE) == 3 \
: 0)
/* Similar, but for floating or large integer constants, and defining letters
G and H. Here VALUE is the CONST_DOUBLE rtx itself.
For Alpha, `G' is the floating-point constant zero. `H' is a CONST_DOUBLE
that is the operand of a ZAP insn. */
#define CONST_DOUBLE_OK_FOR_LETTER_P(VALUE, C) \
((C) == 'G' ? (GET_MODE_CLASS (GET_MODE (VALUE)) == MODE_FLOAT \
&& (VALUE) == CONST0_RTX (GET_MODE (VALUE))) \
: (C) == 'H' ? (GET_MODE (VALUE) == VOIDmode \
&& zap_mask (CONST_DOUBLE_LOW (VALUE)) \
&& zap_mask (CONST_DOUBLE_HIGH (VALUE))) \
: 0)
/* Given an rtx X being reloaded into a reg required to be
in class CLASS, return the class of reg to actually use.
In general this is just CLASS; but on some machines
in some cases it is preferable to use a more restrictive class.
On the Alpha, all constants except zero go into a floating-point
register via memory. */
#define PREFERRED_RELOAD_CLASS(X, CLASS) \
(CONSTANT_P (X) && (X) != const0_rtx && (X) != CONST0_RTX (GET_MODE (X)) \
? ((CLASS) == FLOAT_REGS ? NO_REGS : GENERAL_REGS) \
: (CLASS))
/* Loading and storing HImode or QImode values to and from memory
usually requires a scratch register. The exceptions are loading
QImode and HImode from an aligned address to a general register. */
#define SECONDARY_INPUT_RELOAD_CLASS(CLASS,MODE,IN) \
(((GET_CODE (IN) == MEM \
|| (GET_CODE (IN) == REG && REGNO (IN) >= FIRST_PSEUDO_REGISTER) \
|| (GET_CODE (IN) == SUBREG \
&& (GET_CODE (SUBREG_REG (IN)) == MEM \
|| (GET_CODE (SUBREG_REG (IN)) == REG \
&& REGNO (SUBREG_REG (IN)) >= FIRST_PSEUDO_REGISTER)))) \
&& (((CLASS) == FLOAT_REGS \
&& ((MODE) == SImode || (MODE) == HImode || (MODE) == QImode)) \
|| (((MODE) == QImode || (MODE) == HImode) \
&& unaligned_memory_operand (IN, MODE)))) \
? GENERAL_REGS : NO_REGS)
#define SECONDARY_OUTPUT_RELOAD_CLASS(CLASS,MODE,OUT) \
(((GET_CODE (OUT) == MEM \
|| (GET_CODE (OUT) == REG && REGNO (OUT) >= FIRST_PSEUDO_REGISTER) \
|| (GET_CODE (OUT) == SUBREG \
&& (GET_CODE (SUBREG_REG (OUT)) == MEM \
|| (GET_CODE (SUBREG_REG (OUT)) == REG \
&& REGNO (SUBREG_REG (OUT)) >= FIRST_PSEUDO_REGISTER)))) \
&& (((MODE) == HImode || (MODE) == QImode \
|| ((MODE) == SImode && (CLASS) == FLOAT_REGS)))) \
? GENERAL_REGS : NO_REGS)
/* If we are copying between general and FP registers, we need a memory
location. */
#define SECONDARY_MEMORY_NEEDED(CLASS1,CLASS2,MODE) ((CLASS1) != (CLASS2))
/* Return the maximum number of consecutive registers
needed to represent mode MODE in a register of class CLASS. */
#define CLASS_MAX_NREGS(CLASS, MODE) \
((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD)
/* Define the cost of moving between registers of various classes. Moving
between FLOAT_REGS and anything else except float regs is expensive.
In fact, we make it quite expensive because we really don't want to
do these moves unless it is clearly worth it. Optimizations may
reduce the impact of not being able to allocate a pseudo to a
hard register. */
#define REGISTER_MOVE_COST(CLASS1, CLASS2) \
(((CLASS1) == FLOAT_REGS) == ((CLASS2) == FLOAT_REGS) ? 2 : 20)
/* A C expressions returning the cost of moving data of MODE from a register to
or from memory.
On the Alpha, bump this up a bit. */
#define MEMORY_MOVE_COST(MODE) 6
/* Provide the cost of a branch. Exact meaning under development. */
#define BRANCH_COST 5
/* Adjust the cost of dependencies. */
#define ADJUST_COST(INSN,LINK,DEP,COST) \
(COST) = alpha_adjust_cost (INSN, LINK, DEP, COST)
/* Stack layout; function entry, exit and calling. */
/* Define this if pushing a word on the stack
makes the stack pointer a smaller address. */
#define STACK_GROWS_DOWNWARD
/* Define this if the nominal address of the stack frame
is at the high-address end of the local variables;
that is, each additional local variable allocated
goes at a more negative offset in the frame. */
#define FRAME_GROWS_DOWNWARD
/* Offset within stack frame to start allocating local variables at.
If FRAME_GROWS_DOWNWARD, this is the offset to the END of the
first local allocated. Otherwise, it is the offset to the BEGINNING
of the first local allocated. */
#define STARTING_FRAME_OFFSET (- current_function_pretend_args_size)
/* If we generate an insn to push BYTES bytes,
this says how many the stack pointer really advances by.
On Alpha, don't define this because there are no push insns. */
/* #define PUSH_ROUNDING(BYTES) */
/* Define this if the maximum size of all the outgoing args is to be
accumulated and pushed during the prologue. The amount can be
found in the variable current_function_outgoing_args_size. */
#define ACCUMULATE_OUTGOING_ARGS
/* Offset of first parameter from the argument pointer register value. */
#define FIRST_PARM_OFFSET(FNDECL) (- current_function_pretend_args_size)
/* Definitions for register eliminations.
We have one register that can be eliminated on the Alpha. The
frame pointer register can often be eliminated in favor of the stack
pointer register.
In addition, we use the elimination mechanism to see if gp (r29) is needed.
Initially we assume that it isn't. If it is, we spill it. This is done
by making it an eliminable register. It doesn't matter what we replace
it with, since it will never occur in the rtl at this point. */
/* This is an array of structures. Each structure initializes one pair
of eliminable registers. The "from" register number is given first,
followed by "to". Eliminations of the same "from" register are listed
in order of preference. */
#define ELIMINABLE_REGS \
{{ FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
{ 29, 0}}
/* Given FROM and TO register numbers, say whether this elimination is allowed.
Frame pointer elimination is automatically handled.
We need gp (r29) if we have calls or load symbols
(tested in alpha_need_gp).
All other eliminations are valid since the cases where FP can't be
eliminated are already handled. */
#define CAN_ELIMINATE(FROM, TO) ((FROM) == 29 ? ! alpha_need_gp () : 1)
/* Define the offset between two registers, one to be eliminated, and the other
its replacement, at the start of a routine. */
#define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \
{ if ((FROM) == FRAME_POINTER_REGNUM && (TO) == STACK_POINTER_REGNUM) \
(OFFSET) = (get_frame_size () + current_function_outgoing_args_size \
+ current_function_pretend_args_size \
+ alpha_sa_size () + 15) & ~ 15; \
}
/* Define this if stack space is still allocated for a parameter passed
in a register. */
/* #define REG_PARM_STACK_SPACE */
/* Value is the number of bytes of arguments automatically
popped when returning from a subroutine call.
FUNTYPE is the data type of the function (as a tree),
or for a library call it is an identifier node for the subroutine name.
SIZE is the number of bytes of arguments passed on the stack. */
#define RETURN_POPS_ARGS(FUNTYPE,SIZE) 0
/* Define how to find the value returned by a function.
VALTYPE is the data type of the value (as a tree).
If the precise function being called is known, FUNC is its FUNCTION_DECL;
otherwise, FUNC is 0.
On Alpha the value is found in $0 for integer functions and
$f0 for floating-point functions. */
#define FUNCTION_VALUE(VALTYPE, FUNC) \
gen_rtx (REG, \
((TREE_CODE (VALTYPE) == INTEGER_TYPE \
|| TREE_CODE (VALTYPE) == ENUMERAL_TYPE \
|| TREE_CODE (VALTYPE) == BOOLEAN_TYPE \
|| TREE_CODE (VALTYPE) == CHAR_TYPE \
|| TREE_CODE (VALTYPE) == POINTER_TYPE \
|| TREE_CODE (VALTYPE) == OFFSET_TYPE) \
&& TYPE_PRECISION (VALTYPE) < BITS_PER_WORD) \
? word_mode : TYPE_MODE (VALTYPE), \
TARGET_FPREGS && TREE_CODE (VALTYPE) == REAL_TYPE ? 32 : 0)
/* Define how to find the value returned by a library function
assuming the value has mode MODE. */
#define LIBCALL_VALUE(MODE) \
gen_rtx (REG, MODE, \
TARGET_FPREGS && GET_MODE_CLASS (MODE) == MODE_FLOAT ? 32 : 0)
/* 1 if N is a possible register number for a function value
as seen by the caller. */
#define FUNCTION_VALUE_REGNO_P(N) ((N) == 0 || (N) == 32)
/* 1 if N is a possible register number for function argument passing.
On Alpha, these are $16-$21 and $f16-$f21. */
#define FUNCTION_ARG_REGNO_P(N) \
(((N) >= 16 && (N) <= 21) || ((N) >= 16 + 32 && (N) <= 21 + 32))
/* Define a data type for recording info about an argument list
during the scan of that argument list. This data type should
hold all necessary information about the function itself
and about the args processed so far, enough to enable macros
such as FUNCTION_ARG to determine where the next arg should go.
On Alpha, this is a single integer, which is a number of words
of arguments scanned so far.
Thus 6 or more means all following args should go on the stack. */
#define CUMULATIVE_ARGS int
/* Initialize a variable CUM of type CUMULATIVE_ARGS
for a call to a function whose data type is FNTYPE.
For a library call, FNTYPE is 0. */
#define INIT_CUMULATIVE_ARGS(CUM,FNTYPE,LIBNAME) (CUM) = 0
/* Define intermediate macro to compute the size (in registers) of an argument
for the Alpha. */
#define ALPHA_ARG_SIZE(MODE, TYPE, NAMED) \
((MODE) != BLKmode \
? (GET_MODE_SIZE (MODE) + (UNITS_PER_WORD - 1)) / UNITS_PER_WORD \
: (int_size_in_bytes (TYPE) + (UNITS_PER_WORD - 1)) / UNITS_PER_WORD)
/* Update the data in CUM to advance over an argument
of mode MODE and data type TYPE.
(TYPE is null for libcalls where that information may not be available.) */
#define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED) \
if (MUST_PASS_IN_STACK (MODE, TYPE)) \
(CUM) = 6; \
else \
(CUM) += ALPHA_ARG_SIZE (MODE, TYPE, NAMED)
/* Determine where to put an argument to a function.
Value is zero to push the argument on the stack,
or a hard register in which to store the argument.
MODE is the argument's machine mode.
TYPE is the data type of the argument (as a tree).
This is null for libcalls where that information may
not be available.
CUM is a variable of type CUMULATIVE_ARGS which gives info about
the preceding args and about the function being called.
NAMED is nonzero if this argument is a named parameter
(otherwise it is an extra parameter matching an ellipsis).
On Alpha the first 6 words of args are normally in registers
and the rest are pushed. */
#define FUNCTION_ARG(CUM, MODE, TYPE, NAMED) \
((CUM) < 6 && ! MUST_PASS_IN_STACK (MODE, TYPE) \
? gen_rtx(REG, (MODE), \
(CUM) + 16 + (TARGET_FPREGS \
&& GET_MODE_CLASS (MODE) == MODE_FLOAT) * 32) : 0)
/* Specify the padding direction of arguments.
On the Alpha, we must pad upwards in order to be able to pass args in
registers. */
#define FUNCTION_ARG_PADDING(MODE, TYPE) upward
/* For an arg passed partly in registers and partly in memory,
this is the number of registers used.
For args passed entirely in registers or entirely in memory, zero. */
#define FUNCTION_ARG_PARTIAL_NREGS(CUM, MODE, TYPE, NAMED) \
((CUM) < 6 && 6 < (CUM) + ALPHA_ARG_SIZE (MODE, TYPE, NAMED) \
? 6 - (CUM) : 0)
/* Generate necessary RTL for __builtin_saveregs().
ARGLIST is the argument list; see expr.c. */
extern struct rtx_def *alpha_builtin_saveregs ();
#define EXPAND_BUILTIN_SAVEREGS(ARGLIST) alpha_builtin_saveregs (ARGLIST)
/* Define the information needed to generate branch and scc insns. This is
stored from the compare operation. Note that we can't use "rtx" here
since it hasn't been defined! */
extern struct rtx_def *alpha_compare_op0, *alpha_compare_op1;
extern int alpha_compare_fp_p;
/* This macro produces the initial definition of a function name. On the
29k, we need to save the function name for the epilogue. */
extern char *alpha_function_name;
#define ASM_DECLARE_FUNCTION_NAME(FILE,NAME,DECL) \
{ fprintf (FILE, "\t.ent %s 2\n", NAME); \
ASM_OUTPUT_LABEL (FILE, NAME); \
alpha_function_name = NAME; \
}
/* This macro generates the assembly code for function entry.
FILE is a stdio stream to output the code to.
SIZE is an int: how many units of temporary storage to allocate.
Refer to the array `regs_ever_live' to determine which registers
to save; `regs_ever_live[I]' is nonzero if register number I
is ever used in the function. This macro is responsible for
knowing which registers should not be saved even if used. */
#define FUNCTION_PROLOGUE(FILE, SIZE) output_prolog (FILE, SIZE)
/* Output assembler code to FILE to increment profiler label # LABELNO
for profiling a function entry. */
#define FUNCTION_PROFILER(FILE, LABELNO)
/* EXIT_IGNORE_STACK should be nonzero if, when returning from a function,
the stack pointer does not matter. The value is tested only in
functions that have frame pointers.
No definition is equivalent to always zero. */
#define EXIT_IGNORE_STACK 1
/* This macro generates the assembly code for function exit,
on machines that need it. If FUNCTION_EPILOGUE is not defined
then individual return instructions are generated for each
return statement. Args are same as for FUNCTION_PROLOGUE.
The function epilogue should not depend on the current stack pointer!
It should use the frame pointer only. This is mandatory because
of alloca; we also take advantage of it to omit stack adjustments
before returning. */
#define FUNCTION_EPILOGUE(FILE, SIZE) output_epilog (FILE, SIZE)
/* Output assembler code for a block containing the constant parts
of a trampoline, leaving space for the variable parts.
The trampoline should set the static chain pointer to value placed
into the trampoline and should branch to the specified routine.
Note that $27 has been set to the address of the trampoline, so we can
use it for addressability of the two data items. Trampolines are always
aligned to FUNCTION_BOUNDARY, which is 64 bits. */
#define TRAMPOLINE_TEMPLATE(FILE) \
{ \
fprintf (FILE, "\tldq $1,24($27)\n"); \
fprintf (FILE, "\tldq $27,16($27)\n"); \
fprintf (FILE, "\tjmp $31,($27),0\n"); \
fprintf (FILE, "\tnop\n"); \
fprintf (FILE, "\t.quad 0,0\n"); \
}
/* Section in which to place the trampoline. On Alpha, instructions
may only be placed in a text segment. */
#define TRAMPOLINE_SECTION text_section
/* Length in units of the trampoline for entering a nested function. */
#define TRAMPOLINE_SIZE 32
/* Emit RTL insns to initialize the variable parts of a trampoline.
FNADDR is an RTX for the address of the function's pure code.
CXT is an RTX for the static chain value for the function. We assume
here that a function will be called many more times than its address
is taken (e.g., it might be passed to qsort), so we take the trouble
to initialize the "hint" field in the JMP insn. Note that the hint
field is PC (new) + 4 * bits 13:0. */
#define INITIALIZE_TRAMPOLINE(TRAMP, FNADDR, CXT) \
{ \
rtx _temp, _temp1, _addr; \
\
_addr = memory_address (Pmode, plus_constant ((TRAMP), 16)); \
emit_move_insn (gen_rtx (MEM, Pmode, _addr), (FNADDR)); \
_addr = memory_address (Pmode, plus_constant ((TRAMP), 24)); \
emit_move_insn (gen_rtx (MEM, Pmode, _addr), (CXT)); \
\
_temp = force_operand (plus_constant ((TRAMP), 12), NULL_RTX); \
_temp = expand_binop (DImode, sub_optab, (FNADDR), _temp, _temp, 1, \
OPTAB_WIDEN); \
_temp = expand_shift (RSHIFT_EXPR, Pmode, _temp, \
build_int_2 (2, 0), NULL_RTX, 1); \
_temp = expand_and (gen_lowpart (SImode, _temp), \
GEN_INT (0x3fff), 0); \
\
_addr = memory_address (SImode, plus_constant ((TRAMP), 8)); \
_temp1 = force_reg (SImode, gen_rtx (MEM, SImode, _addr)); \
_temp1 = expand_and (_temp1, GEN_INT (0xffffc000), NULL_RTX); \
_temp1 = expand_binop (SImode, ior_optab, _temp1, _temp, _temp1, 1, \
OPTAB_WIDEN); \
\
emit_move_insn (gen_rtx (MEM, SImode, _addr), _temp1); \
\
emit_library_call (gen_rtx (SYMBOL_REF, Pmode, \
"__enable_execute_stack"), \
0, VOIDmode, 1,_addr, Pmode); \
\
emit_insn (gen_rtx (UNSPEC_VOLATILE, VOIDmode, \
gen_rtvec (1, const0_rtx), 0)); \
}
/* Attempt to turn on access permissions for the stack. */
#define TRANSFER_FROM_TRAMPOLINE \
\
void \
__enable_execute_stack (addr) \
void *addr; \
{ \
long size = getpagesize (); \
long mask = ~(size-1); \
char *page = (char *) (((long) addr) & mask); \
char *end = (char *) ((((long) (addr + TRAMPOLINE_SIZE)) & mask) + size); \
\
/* 7 is PROT_READ | PROT_WRITE | PROT_EXEC */ \
if (mprotect (page, end - page, 7) < 0) \
perror ("mprotect of trampoline code"); \
}
/* Addressing modes, and classification of registers for them. */
/* #define HAVE_POST_INCREMENT */
/* #define HAVE_POST_DECREMENT */
/* #define HAVE_PRE_DECREMENT */
/* #define HAVE_PRE_INCREMENT */
/* Macros to check register numbers against specific register classes. */
/* These assume that REGNO is a hard or pseudo reg number.
They give nonzero only if REGNO is a hard reg of the suitable class
or a pseudo reg currently allocated to a suitable hard reg.
Since they use reg_renumber, they are safe only once reg_renumber
has been allocated, which happens in local-alloc.c. */
#define REGNO_OK_FOR_INDEX_P(REGNO) 0
#define REGNO_OK_FOR_BASE_P(REGNO) \
(((REGNO) < 32 || (unsigned) reg_renumber[REGNO] < 32))
/* Maximum number of registers that can appear in a valid memory address. */
#define MAX_REGS_PER_ADDRESS 1
/* Recognize any constant value that is a valid address. For the Alpha,
there are only constants none since we want to use LDA to load any
symbolic addresses into registers. */
#define CONSTANT_ADDRESS_P(X) \
(GET_CODE (X) == CONST_INT \
&& (unsigned HOST_WIDE_INT) (INTVAL (X) + 0x8000) < 0x10000)
/* Include all constant integers and constant doubles, but not
floating-point, except for floating-point zero. */
#define LEGITIMATE_CONSTANT_P(X) \
(GET_MODE_CLASS (GET_MODE (X)) != MODE_FLOAT \
|| (X) == CONST0_RTX (GET_MODE (X)))
/* The macros REG_OK_FOR..._P assume that the arg is a REG rtx
and check its validity for a certain class.
We have two alternate definitions for each of them.
The usual definition accepts all pseudo regs; the other rejects
them unless they have been allocated suitable hard regs.
The symbol REG_OK_STRICT causes the latter definition to be used.
Most source files want to accept pseudo regs in the hope that
they will get allocated to the class that the insn wants them to be in.
Source files for reload pass need to be strict.
After reload, it makes no difference, since pseudo regs have
been eliminated by then. */
#ifndef REG_OK_STRICT
/* Nonzero if X is a hard reg that can be used as an index
or if it is a pseudo reg. */
#define REG_OK_FOR_INDEX_P(X) 0
/* Nonzero if X is a hard reg that can be used as a base reg
or if it is a pseudo reg. */
#define REG_OK_FOR_BASE_P(X) \
(REGNO (X) < 32 || REGNO (X) >= FIRST_PSEUDO_REGISTER)
#else
/* Nonzero if X is a hard reg that can be used as an index. */
#define REG_OK_FOR_INDEX_P(X) REGNO_OK_FOR_INDEX_P (REGNO (X))
/* Nonzero if X is a hard reg that can be used as a base reg. */
#define REG_OK_FOR_BASE_P(X) REGNO_OK_FOR_BASE_P (REGNO (X))
#endif
/* GO_IF_LEGITIMATE_ADDRESS recognizes an RTL expression
that is a valid memory address for an instruction.
The MODE argument is the machine mode for the MEM expression
that wants to use this address.
For Alpha, we have either a constant address or the sum of a register
and a constant address, or just a register. For DImode, any of those
forms can be surrounded with an AND that clear the low-order three bits;
this is an "unaligned" access.
We also allow a SYMBOL_REF that is the name of the current function as
valid address. This is for CALL_INSNs. It cannot be used in any other
context.
First define the basic valid address. */
#define GO_IF_LEGITIMATE_SIMPLE_ADDRESS(MODE, X, ADDR) \
{ if (REG_P (X) && REG_OK_FOR_BASE_P (X)) \
goto ADDR; \
if (CONSTANT_ADDRESS_P (X)) \
goto ADDR; \
if (GET_CODE (X) == PLUS \
&& REG_P (XEXP (X, 0)) \
&& REG_OK_FOR_BASE_P (XEXP (X, 0)) \
&& CONSTANT_ADDRESS_P (XEXP (X, 1))) \
goto ADDR; \
}
/* Now accept the simple address, or, for DImode only, an AND of a simple
address that turns off the low three bits. */
extern char *current_function_name;
#define GO_IF_LEGITIMATE_ADDRESS(MODE, X, ADDR) \
{ GO_IF_LEGITIMATE_SIMPLE_ADDRESS (MODE, X, ADDR); \
if ((MODE) == DImode \
&& GET_CODE (X) == AND \
&& GET_CODE (XEXP (X, 1)) == CONST_INT \
&& INTVAL (XEXP (X, 1)) == -8) \
GO_IF_LEGITIMATE_SIMPLE_ADDRESS (MODE, XEXP (X, 0), ADDR); \
if ((MODE) == Pmode && GET_CODE (X) == SYMBOL_REF \
&& ! strcmp (XSTR (X, 0), current_function_name)) \
goto ADDR; \
}
/* Try machine-dependent ways of modifying an illegitimate address
to be legitimate. If we find one, return the new, valid address.
This macro is used in only one place: `memory_address' in explow.c.
OLDX is the address as it was before break_out_memory_refs was called.
In some cases it is useful to look at this to decide what needs to be done.
MODE and WIN are passed so that this macro can use
GO_IF_LEGITIMATE_ADDRESS.
It is always safe for this macro to do nothing. It exists to recognize
opportunities to optimize the output.
For the Alpha, there are three cases we handle:
(1) If the address is (plus reg const_int) and the CONST_INT is not a
valid offset, compute the high part of the constant and add it to the
register. Then our address is (plus temp low-part-const).
(2) If the address is (const (plus FOO const_int)), find the low-order
part of the CONST_INT. Then load FOO plus any high-order part of the
CONST_INT into a register. Our address is (plus reg low-part-const).
This is done to reduce the number of GOT entries.
(3) If we have a (plus reg const), emit the load as in (2), then add
the two registers, and finally generate (plus reg low-part-const) as
our address. */
#define LEGITIMIZE_ADDRESS(X,OLDX,MODE,WIN) \
{ if (GET_CODE (X) == PLUS && GET_CODE (XEXP (X, 0)) == REG \
&& GET_CODE (XEXP (X, 1)) == CONST_INT \
&& ! CONSTANT_ADDRESS_P (XEXP (X, 1))) \
{ \
HOST_WIDE_INT val = INTVAL (XEXP (X, 1)); \
HOST_WIDE_INT lowpart = (val & 0xffff) - 2 * (val & 0x8000); \
HOST_WIDE_INT highpart = val - lowpart; \
rtx high = GEN_INT (highpart); \
rtx temp = expand_binop (Pmode, add_optab, XEXP (x, 0), \
high, 0, OPTAB_LIB_WIDEN); \
\
(X) = plus_constant (temp, lowpart); \
goto WIN; \
} \
else if (GET_CODE (X) == CONST \
&& GET_CODE (XEXP (X, 0)) == PLUS \
&& GET_CODE (XEXP (XEXP (X, 0), 1)) == CONST_INT) \
{ \
HOST_WIDE_INT val = INTVAL (XEXP (XEXP (X, 0), 1)); \
HOST_WIDE_INT lowpart = (val & 0xffff) - 2 * (val & 0x8000); \
HOST_WIDE_INT highpart = val - lowpart; \
rtx high = XEXP (XEXP (X, 0), 0); \
\
if (highpart) \
high = plus_constant (high, highpart); \
\
(X) = plus_constant (force_reg (Pmode, high), lowpart); \
goto WIN; \
} \
else if (GET_CODE (X) == PLUS && GET_CODE (XEXP (X, 0)) == REG \
&& GET_CODE (XEXP (X, 1)) == CONST \
&& GET_CODE (XEXP (XEXP (X, 1), 0)) == PLUS \
&& GET_CODE (XEXP (XEXP (XEXP (X, 1), 0), 1)) == CONST_INT) \
{ \
HOST_WIDE_INT val = INTVAL (XEXP (XEXP (XEXP (X, 1), 0), 1)); \
HOST_WIDE_INT lowpart = (val & 0xffff) - 2 * (val & 0x8000); \
HOST_WIDE_INT highpart = val - lowpart; \
rtx high = XEXP (XEXP (XEXP (X, 1), 0), 0); \
\
if (highpart) \
high = plus_constant (high, highpart); \
\
high = expand_binop (Pmode, add_optab, XEXP (X, 0), \
force_reg (Pmode, high), \
high, OPTAB_LIB_WIDEN); \
(X) = plus_constant (high, lowpart); \
goto WIN; \
} \
}
/* Go to LABEL if ADDR (a legitimate address expression)
has an effect that depends on the machine mode it is used for.
On the Alpha this is true only for the unaligned modes. We can
simplify this test since we know that the address must be valid. */
#define GO_IF_MODE_DEPENDENT_ADDRESS(ADDR,LABEL) \
{ if (GET_CODE (ADDR) == AND) goto LABEL; }
/* Compute the cost of an address. For the Alpha, all valid addresses are
the same cost. */
#define ADDRESS_COST(X) 0
/* Define this if some processing needs to be done immediately before
emitting code for an insn. */
/* #define FINAL_PRESCAN_INSN(INSN,OPERANDS,NOPERANDS) */
/* Specify the machine mode that this machine uses
for the index in the tablejump instruction. */
#define CASE_VECTOR_MODE SImode
/* Define this if the tablejump instruction expects the table
to contain offsets from the address of the table.
Do not define this if the table should contain absolute addresses. */
/* #define CASE_VECTOR_PC_RELATIVE */
/* Specify the tree operation to be used to convert reals to integers. */
#define IMPLICIT_FIX_EXPR FIX_ROUND_EXPR
/* This is the kind of divide that is easiest to do in the general case. */
#define EASY_DIV_EXPR TRUNC_DIV_EXPR
/* Define this as 1 if `char' should by default be signed; else as 0. */
#define DEFAULT_SIGNED_CHAR 1
/* This flag, if defined, says the same insns that convert to a signed fixnum
also convert validly to an unsigned one.
We actually lie a bit here as overflow conditions are different. But
they aren't being checked anyway. */
#define FIXUNS_TRUNC_LIKE_FIX_TRUNC
/* Max number of bytes we can move to or from memory
in one reasonably fast instruction. */
#define MOVE_MAX 8
/* Largest number of bytes of an object that can be placed in a register.
On the Alpha we have plenty of registers, so use TImode. */
#define MAX_FIXED_MODE_SIZE GET_MODE_BITSIZE (TImode)
/* Nonzero if access to memory by bytes is no faster than for words.
Also non-zero if doing byte operations (specifically shifts) in registers
is undesirable.
On the Alpha, we want to not use the byte operation and instead use
masking operations to access fields; these will save instructions. */
#define SLOW_BYTE_ACCESS 1
/* Define if normal loads of shorter-than-word items from memory clears
the rest of the bits in the register. */
/* #define BYTE_LOADS_ZERO_EXTEND */
/* Define if normal loads of shorter-than-word items from memory sign-extends
the rest of the bits in the register. */
#define BYTE_LOADS_SIGN_EXTEND
/* We aren't doing ANYTHING about debugging for now. */
/* #define SDB_DEBUGGING_INFO */
/* Do not break .stabs pseudos into continuations. */
#define DBX_CONTIN_LENGTH 0
/* Don't try to use the `x' type-cross-reference character in DBX data.
Also has the consequence of putting each struct, union or enum
into a separate .stabs, containing only cross-refs to the others. */
#define DBX_NO_XREFS
/* Value is 1 if truncating an integer of INPREC bits to OUTPREC bits
is done just by pretending it is already truncated. */
#define TRULY_NOOP_TRUNCATION(OUTPREC, INPREC) 1
/* We assume that the store-condition-codes instructions store 0 for false
and some other value for true. This is the value stored for true. */
#define STORE_FLAG_VALUE 1
/* Define the value returned by a floating-point comparison instruction. */
#define FLOAT_STORE_FLAG_VALUE 0.5
/* Specify the machine mode that pointers have.
After generation of rtl, the compiler makes no further distinction
between pointers and any other objects of this machine mode. */
#define Pmode DImode
/* Mode of a function address in a call instruction (for indexing purposes). */
#define FUNCTION_MODE Pmode
/* Define this if addresses of constant functions
shouldn't be put through pseudo regs where they can be cse'd.
Desirable on machines where ordinary constants are expensive
but a CALL with constant address is cheap.
We define this on the Alpha so that gen_call and gen_call_value
get to see the SYMBOL_REF (for the hint field of the jsr). It will
then copy it into a register, thus actually letting the address be
cse'ed. */
#define NO_FUNCTION_CSE
/* Define this if shift instructions ignore all but the low-order
few bits. */
#define SHIFT_COUNT_TRUNCATED
/* Compute the cost of computing a constant rtl expression RTX
whose rtx-code is CODE. The body of this macro is a portion
of a switch statement. If the code is computed here,
return it with a return statement. Otherwise, break from the switch.
We only care about the cost if it is valid in an insn, so all constants
are cheap. */
#define CONST_COSTS(RTX,CODE,OUTER_CODE) \
case CONST_INT: \
case CONST_DOUBLE: \
return 0; \
case CONST: \
case SYMBOL_REF: \
case LABEL_REF: \
return 6; \
/* Provide the costs of a rtl expression. This is in the body of a
switch on CODE. */
#define RTX_COSTS(X,CODE,OUTER_CODE) \
case PLUS: \
case MINUS: \
if (GET_MODE_CLASS (GET_MODE (X)) == MODE_FLOAT) \
return COSTS_N_INSNS (6); \
break; \
case MULT: \
if (GET_MODE_CLASS (GET_MODE (X)) == MODE_FLOAT) \
return COSTS_N_INSNS (6); \
else \
return COSTS_N_INSNS (21); \
case DIV: \
case UDIV: \
case MOD: \
case UMOD: \
if (GET_MODE (X) == SFmode) \
return COSTS_N_INSNS (34); \
else if (GET_MODE (X) == DFmode) \
return COSTS_N_INSNS (63); \
else \
return COSTS_N_INSNS (70); \
case MEM: \
return COSTS_N_INSNS (3);
/* Control the assembler format that we output. */
/* Output at beginning of assembler file. */
#define ASM_FILE_START(FILE) \
{ extern char *version_string; \
char *p, *after_dir = main_input_filename; \
\
fprintf (FILE, "\t.verstamp 9 0 "); \
for (p = version_string; *p != ' ' && *p != 0; p++) \
fprintf (FILE, "%c", *p == '.' ? ' ' : *p); \
fprintf (FILE, "\n\t.set noreorder\n"); \
fprintf (FILE, "\t.set noat\n"); \
for (p = main_input_filename; *p; p++) \
if (*p == '/') \
after_dir = p + 1; \
fprintf (FILE, "\n\t.file 2 \"%s\"\n", after_dir); \
}
/* Output to assembler file text saying following lines
may contain character constants, extra white space, comments, etc. */
#define ASM_APP_ON ""
/* Output to assembler file text saying following lines
no longer contain unusual constructs. */
#define ASM_APP_OFF ""
#define TEXT_SECTION_ASM_OP ".text"
/* Output before read-only data. */
#define READONLY_DATA_SECTION_ASM_OP ".rdata"
/* Output before writable data. */
#define DATA_SECTION_ASM_OP ".data"
/* Define an extra section for read-only data, a routine to enter it, and
indicate that it is for read-only data. */
#define EXTRA_SECTIONS readonly_data
#define EXTRA_SECTION_FUNCTIONS \
void \
literal_section () \
{ \
if (in_section != readonly_data) \
{ \
fprintf (asm_out_file, "%s\n", READONLY_DATA_SECTION_ASM_OP); \
in_section = readonly_data; \
} \
} \
#define READONLY_DATA_SECTION literal_section
/* How to refer to registers in assembler output.
This sequence is indexed by compiler's hard-register-number (see above). */
#define REGISTER_NAMES \
{"$0", "$1", "$2", "$3", "$4", "$5", "$6", "$7", "$8", \
"$9", "$10", "$11", "$12", "$13", "$14", "$15", \
"$16", "$17", "$18", "$19", "$20", "$21", "$22", "$23", \
"$24", "$25", "$26", "$27", "$28", "$29", "$30", "$31", \
"$f0", "$f1", "$f2", "$f3", "$f4", "$f5", "$f6", "$f7", "$f8", \
"$f9", "$f10", "$f11", "$f12", "$f13", "$f14", "$f15", \
"$f16", "$f17", "$f18", "$f19", "$f20", "$f21", "$f22", "$f23",\
"$f24", "$f25", "$f26", "$f27", "$f28", "$f29", "$f30", "$f31"}
/* How to renumber registers for dbx and gdb. */
#define DBX_REGISTER_NUMBER(REGNO) (REGNO)
/* This is how to output the definition of a user-level label named NAME,
such as the label on a static function or variable NAME. */
#define ASM_OUTPUT_LABEL(FILE,NAME) \
do { assemble_name (FILE, NAME); fputs (":\n", FILE); } while (0)
/* This is how to output a command to make the user-level label named NAME
defined for reference from other files. */
#define ASM_GLOBALIZE_LABEL(FILE,NAME) \
do { fputs ("\t.globl ", FILE); assemble_name (FILE, NAME); fputs ("\n", FILE);} while (0)
/* This is how to output a reference to a user-level label named NAME.
`assemble_name' uses this. */
#define ASM_OUTPUT_LABELREF(FILE,NAME) \
fprintf (FILE, "%s", NAME)
/* This is how to output an internal numbered label where
PREFIX is the class of label and NUM is the number within the class. */
#define ASM_OUTPUT_INTERNAL_LABEL(FILE,PREFIX,NUM) \
if ((PREFIX)[0] == 'L') \
fprintf (FILE, "$%s%d:\n", & (PREFIX)[1], NUM + 32); \
else \
fprintf (FILE, "%s%d:\n", PREFIX, NUM);
/* This is how to output a label for a jump table. Arguments are the same as
for ASM_OUTPUT_INTERNAL_LABEL, except the insn for the jump table is
passed. */
#define ASM_OUTPUT_CASE_LABEL(FILE,PREFIX,NUM,TABLEINSN) \
{ ASM_OUTPUT_ALIGN (FILE, 2); ASM_OUTPUT_INTERNAL_LABEL (FILE, PREFIX, NUM); }
/* This is how to store into the string LABEL
the symbol_ref name of an internal numbered label where
PREFIX is the class of label and NUM is the number within the class.
This is suitable for output with `assemble_name'. */
#define ASM_GENERATE_INTERNAL_LABEL(LABEL,PREFIX,NUM) \
if ((PREFIX)[0] == 'L') \
sprintf (LABEL, "*$%s%d", & (PREFIX)[1], NUM + 32); \
else \
sprintf (LABEL, "*%s%d", PREFIX, NUM)
/* This is how to output an assembler line defining a `double' constant. */
#define ASM_OUTPUT_DOUBLE(FILE,VALUE) \
fprintf (FILE, "\t.t_floating %.20e\n", (VALUE))
/* This is how to output an assembler line defining a `float' constant. */
#define ASM_OUTPUT_FLOAT(FILE,VALUE) \
fprintf (FILE, "\t.s_floating %.20e\n", (VALUE))
/* This is how to output an assembler line defining an `int' constant. */
#define ASM_OUTPUT_INT(FILE,VALUE) \
( fprintf (FILE, "\t.long "), \
output_addr_const (FILE, (VALUE)), \
fprintf (FILE, "\n"))
/* This is how to output an assembler line defining a `long' constant. */
#define ASM_OUTPUT_DOUBLE_INT(FILE,VALUE) \
( fprintf (FILE, "\t.quad "), \
output_addr_const (FILE, (VALUE)), \
fprintf (FILE, "\n"))
/* Likewise for `char' and `short' constants. */
#define ASM_OUTPUT_SHORT(FILE,VALUE) \
( fprintf (FILE, "\t.word "), \
output_addr_const (FILE, (VALUE)), \
fprintf (FILE, "\n"))
#define ASM_OUTPUT_CHAR(FILE,VALUE) \
( fprintf (FILE, "\t.byte "), \
output_addr_const (FILE, (VALUE)), \
fprintf (FILE, "\n"))
/* We use the default ASCII-output routine, except that we don't write more
than 50 characters since the assembler doesn't support very long lines. */
#define ASM_OUTPUT_ASCII(MYFILE, MYSTRING, MYLENGTH) \
do { \
FILE *_hide_asm_out_file = (MYFILE); \
unsigned char *_hide_p = (unsigned char *) (MYSTRING); \
int _hide_thissize = (MYLENGTH); \
int _size_so_far = 0; \
{ \
FILE *asm_out_file = _hide_asm_out_file; \
unsigned char *p = _hide_p; \
int thissize = _hide_thissize; \
int i; \
fprintf (asm_out_file, "\t.ascii \""); \
\
for (i = 0; i < thissize; i++) \
{ \
register int c = p[i]; \
\
if (_size_so_far ++ > 50 && i < thissize - 4) \
_size_so_far = 0, fprintf (asm_out_file, "\"\n\t.ascii \""); \
\
if (c == '\"' || c == '\\') \
putc ('\\', asm_out_file); \
if (c >= ' ' && c < 0177) \
putc (c, asm_out_file); \
else \
{ \
fprintf (asm_out_file, "\\%o", c); \
/* After an octal-escape, if a digit follows, \
terminate one string constant and start another. \
The Vax assembler fails to stop reading the escape \
after three digits, so this is the only way we \
can get it to parse the data properly. */ \
if (i < thissize - 1 \
&& p[i + 1] >= '0' && p[i + 1] <= '9') \
fprintf (asm_out_file, "\"\n\t.ascii \""); \
} \
} \
fprintf (asm_out_file, "\"\n"); \
} \
} \
while (0)
/* This is how to output an insn to push a register on the stack.
It need not be very fast code. */
#define ASM_OUTPUT_REG_PUSH(FILE,REGNO) \
fprintf (FILE, "\tsubq $30,8,$30\n\tst%s $%s%d,0($30)\n", \
(REGNO) > 32 ? "t" : "q", (REGNO) > 32 ? "f" : "", \
(REGNO) & 31);
/* This is how to output an insn to pop a register from the stack.
It need not be very fast code. */
#define ASM_OUTPUT_REG_POP(FILE,REGNO) \
fprintf (FILE, "\tld%s $%s%d,0($30)\n\taddq $30,8,$30\n", \
(REGNO) > 32 ? "t" : "q", (REGNO) > 32 ? "f" : "", \
(REGNO) & 31);
/* This is how to output an assembler line for a numeric constant byte. */
#define ASM_OUTPUT_BYTE(FILE,VALUE) \
fprintf (FILE, "\t.byte 0x%x\n", (VALUE))
/* This is how to output an element of a case-vector that is absolute. */
#define ASM_OUTPUT_ADDR_VEC_ELT(FILE, VALUE) \
fprintf (FILE, "\t.gprel32 $%d\n", (VALUE) + 32)
/* This is how to output an element of a case-vector that is relative.
(Alpha does not use such vectors, but we must define this macro anyway.) */
#define ASM_OUTPUT_ADDR_DIFF_ELT(FILE, VALUE, REL) abort ()
/* This is how to output an assembler line
that says to advance the location counter
to a multiple of 2**LOG bytes. */
#define ASM_OUTPUT_ALIGN(FILE,LOG) \
if ((LOG) != 0) \
fprintf (FILE, "\t.align %d\n", LOG);
/* This is how to advance the location counter by SIZE bytes. */
#define ASM_OUTPUT_SKIP(FILE,SIZE) \
fprintf (FILE, "\t.space %d\n", (SIZE))
/* This says how to output an assembler line
to define a global common symbol. */
#define ASM_OUTPUT_COMMON(FILE, NAME, SIZE, ROUNDED) \
( fputs ("\t.comm ", (FILE)), \
assemble_name ((FILE), (NAME)), \
fprintf ((FILE), ",%d\n", (SIZE)))
/* This says how to output an assembler line
to define a local common symbol. */
#define ASM_OUTPUT_LOCAL(FILE, NAME, SIZE,ROUNDED) \
( fputs ("\t.lcomm ", (FILE)), \
assemble_name ((FILE), (NAME)), \
fprintf ((FILE), ",%d\n", (SIZE)))
/* Store in OUTPUT a string (made with alloca) containing
an assembler-name for a local static variable named NAME.
LABELNO is an integer which is different for each call. */
#define ASM_FORMAT_PRIVATE_NAME(OUTPUT, NAME, LABELNO) \
( (OUTPUT) = (char *) alloca (strlen ((NAME)) + 10), \
sprintf ((OUTPUT), "%s.%d", (NAME), (LABELNO)))
/* Define the parentheses used to group arithmetic operations
in assembler code. */
#define ASM_OPEN_PAREN "("
#define ASM_CLOSE_PAREN ")"
/* Define results of standard character escape sequences. */
#define TARGET_BELL 007
#define TARGET_BS 010
#define TARGET_TAB 011
#define TARGET_NEWLINE 012
#define TARGET_VT 013
#define TARGET_FF 014
#define TARGET_CR 015
/* Print operand X (an rtx) in assembler syntax to file FILE.
CODE is a letter or dot (`z' in `%z0') or 0 if no letter was specified.
For `%' followed by punctuation, CODE is the punctuation and X is null. */
#define PRINT_OPERAND(FILE, X, CODE) print_operand (FILE, X, CODE)
/* Determine which codes are valid without a following integer. These must
not be alphabetic. */
#define PRINT_OPERAND_PUNCT_VALID_P(CODE) 0
/* Print a memory address as an operand to reference that memory location. */
#define PRINT_OPERAND_ADDRESS(FILE, ADDR) \
{ rtx addr = (ADDR); \
int basereg = 31; \
HOST_WIDE_INT offset = 0; \
\
if (GET_CODE (addr) == AND) \
addr = XEXP (addr, 0); \
\
if (GET_CODE (addr) == REG) \
basereg = REGNO (addr); \
else if (GET_CODE (addr) == CONST_INT) \
offset = INTVAL (addr); \
else if (GET_CODE (addr) == PLUS \
&& GET_CODE (XEXP (addr, 0)) == REG \
&& GET_CODE (XEXP (addr, 1)) == CONST_INT) \
basereg = REGNO (XEXP (addr, 0)), offset = INTVAL (XEXP (addr, 1)); \
else \
abort (); \
\
fprintf (FILE, "%d($%d)", offset, basereg); \
}
/* Define the codes that are matched by predicates in alpha.c. */
#define PREDICATE_CODES \
{"reg_or_0_operand", {SUBREG, REG, CONST_INT}}, \
{"reg_or_8bit_operand", {SUBREG, REG, CONST_INT}}, \
{"reg_or_cint_operand", {SUBREG, REG, CONST_INT}}, \
{"add_operand", {SUBREG, REG, CONST_INT}}, \
{"sext_add_operand", {SUBREG, REG, CONST_INT}}, \
{"const48_operand", {CONST_INT}}, \
{"and_operand", {SUBREG, REG, CONST_INT}}, \
{"mode_mask_operand", {CONST_INT}}, \
{"mul8_operand", {CONST_INT}}, \
{"mode_width_operand", {CONST_INT}}, \
{"reg_or_fp0_operand", {SUBREG, REG, CONST_DOUBLE}}, \
{"alpha_comparison_operator", {EQ, LE, LT, LEU, LTU}}, \
{"signed_comparison_operator", {EQ, NE, LE, LT, GE, GT}}, \
{"fp0_operand", {CONST_DOUBLE}}, \
{"input_operand", {SUBREG, REG, MEM, CONST_INT, CONST_DOUBLE, \
SYMBOL_REF, CONST, LABEL_REF}}, \
{"aligned_memory_operand", {MEM}}, \
{"unaligned_memory_operand", {MEM}}, \
{"any_memory_operand", {MEM}},