/* Subroutines for insn-output.c for Pyramid 90x, 9000, and MIServer Series. Copyright (C) 1989, 1991 Free Software Foundation, Inc. This file is part of GNU CC. GNU CC is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. GNU CC is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GNU CC; see the file COPYING. If not, write to the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ /* Some output-actions in pyr.md need these. */ #include <stdio.h> #include "config.h" #include "rtl.h" #include "regs.h" #include "hard-reg-set.h" #include "real.h" #include "insn-config.h" #include "conditions.h" #include "insn-flags.h" #include "output.h" #include "insn-attr.h" #include "tree.h" /* * Do FUNCTION_ARG. * This cannot be defined as a macro on pyramids, because Pyramid Technology's * C compiler dies on (several equivalent definitions of) this macro. * The only way around this cc bug was to make this a function. * While it would be possible to use a macro version for gcc, it seems * more reliable to have a single version of the code. */ void * pyr_function_arg(cum, mode, type, named) CUMULATIVE_ARGS cum; enum machine_mode mode; tree type; { return (void *)(FUNCTION_ARG_HELPER (cum, mode,type,named)); } /* Do the hard part of PARAM_SAFE_FOR_REG_P. * This cannot be defined as a macro on pyramids, because Pyramid Technology's * C compiler dies on (several equivalent definitions of) this macro. * The only way around this cc bug was to make this a function. */ int inner_param_safe_helper (type) tree type; { return (INNER_PARAM_SAFE_HELPER(type)); } /* Return 1 if OP is a non-indexed operand of mode MODE. This is either a register reference, a memory reference, or a constant. In the case of a memory reference, the address is checked to make sure it isn't indexed. Register and memory references must have mode MODE in order to be valid, but some constants have no machine mode and are valid for any mode. If MODE is VOIDmode, OP is checked for validity for whatever mode it has. The main use of this function is as a predicate in match_operand expressions in the machine description. It is useful to compare this with general_operand(). They should be identical except for one line. This function seems necessary because of the non-orthogonality of Pyramid insns. For any 2-operand insn, and any combination of operand modes, if indexing is valid for the isn's second operand, it is invalid for the first operand to be indexed. */ extern int volatile_ok; int nonindexed_operand (op, mode) register rtx op; enum machine_mode mode; { register RTX_CODE code = GET_CODE (op); int mode_altering_drug = 0; if (mode == VOIDmode) mode = GET_MODE (op); /* Don't accept CONST_INT or anything similar if the caller wants something floating. */ if (GET_MODE (op) == VOIDmode && mode != VOIDmode && GET_MODE_CLASS (mode) != MODE_INT) return 0; if (CONSTANT_P (op)) return ((GET_MODE (op) == VOIDmode || GET_MODE (op) == mode) && LEGITIMATE_CONSTANT_P (op)); /* Except for certain constants with VOIDmode, already checked for, OP's mode must match MODE if MODE specifies a mode. */ if (GET_MODE (op) != mode) return 0; while (code == SUBREG) { op = SUBREG_REG (op); code = GET_CODE (op); #if 0 /* No longer needed, since (SUBREG (MEM...)) will load the MEM into a reload reg in the MEM's own mode. */ mode_altering_drug = 1; #endif } if (code == REG) return 1; if (code == CONST_DOUBLE) return LEGITIMATE_CONSTANT_P (op); if (code == MEM) { register rtx y = XEXP (op, 0); if (! volatile_ok && MEM_VOLATILE_P (op)) return 0; GO_IF_NONINDEXED_ADDRESS (y, win); } return 0; win: if (mode_altering_drug) return ! mode_dependent_address_p (XEXP (op, 0)); return 1; } /* Return non-zero if the rtx OP has an immediate component. An immediate component or additive term equal to zero is rejected due to assembler problems. */ int has_direct_base (op) rtx op; { if ((CONSTANT_ADDRESS_P (op) && op != const0_rtx) || (GET_CODE (op) == PLUS && ((CONSTANT_ADDRESS_P (XEXP (op, 1)) && XEXP (op, 1) != const0_rtx) || (CONSTANT_ADDRESS_P (XEXP (op, 0)) && XEXP (op, 0) != const0_rtx)))) return 1; return 0; } /* Return zero if the rtx OP has a (scaled) index. */ int has_index (op) rtx op; { if (GET_CODE (op) == PLUS && (GET_CODE (XEXP (op, 0)) == MULT || (GET_CODE (XEXP (op, 1)) == MULT))) return 1; else return 0; } int swap_operands; /* weird_memory_memory -- return 1 if OP1 and OP2 can be compared (or exchanged with xchw) with one instruction. If the operands need to be swapped, set the global variable SWAP_OPERANDS. This function silently assumes that both OP0 and OP1 are valid memory references. */ int weird_memory_memory (op0, op1) rtx op0, op1; { RTX_CODE code0, code1; op0 = XEXP (op0, 0); op1 = XEXP (op1, 0); code0 = GET_CODE (op0); code1 = GET_CODE (op1); swap_operands = 0; if (code1 == REG || code1 == SUBREG) { return 1; } if (code0 == REG || code0 == SUBREG) { swap_operands = 1; return 1; } if (has_direct_base (op0) && has_direct_base (op1)) { if (has_index (op1)) { if (has_index (op0)) return 0; swap_operands = 1; } return 1; } return 0; } int signed_comparison (x, mode) rtx x; enum machine_mode mode; { return ! TRULY_UNSIGNED_COMPARE_P (GET_CODE (x)); } extern rtx force_reg (); rtx test_op0, test_op1; enum machine_mode test_mode; /* Sign-extend or zero-extend constant X from FROM_MODE to TO_MODE. */ rtx extend_const (x, extop, from_mode, to_mode) rtx x; RTX_CODE extop; enum machine_mode from_mode, to_mode; { int val; int negative; if (from_mode == to_mode) return x; if (GET_CODE (x) != CONST_INT) abort (); val = INTVAL (x); negative = val & (1 << (GET_MODE_BITSIZE (from_mode) - 1)); if (GET_MODE_BITSIZE (from_mode) == HOST_BITS_PER_INT) abort (); if (negative && extop == SIGN_EXTEND) val = val | ((-1) << (GET_MODE_BITSIZE (from_mode))); else val = val & ~((-1) << (GET_MODE_BITSIZE (from_mode))); if (GET_MODE_BITSIZE (to_mode) == HOST_BITS_PER_INT) return gen_rtx (CONST_INT, VOIDmode, val); return gen_rtx (CONST_INT, VOIDmode, val & ~((-1) << (GET_MODE_BITSIZE (to_mode)))); } rtx ensure_extended (op, extop, from_mode) rtx op; RTX_CODE extop; enum machine_mode from_mode; { if (GET_CODE (op) == CONST_INT) return extend_const (op, extop, from_mode, SImode); else return force_reg (SImode, gen_rtx (extop, SImode, op)); } /* Emit rtl for a branch, as well as any delayed (integer) compare insns. The compare insn to perform is determined by the global variables test_op0 and test_op1. */ void extend_and_branch (extop) RTX_CODE extop; { rtx op0, op1; RTX_CODE code0, code1; op0 = test_op0, op1 = test_op1; if (op0 == 0) return; code0 = GET_CODE (op0); if (op1 != 0) code1 = GET_CODE (op1); test_op0 = test_op1 = 0; if (op1 == 0) { op0 = ensure_extended (op0, extop, test_mode); emit_insn (gen_rtx (SET, VOIDmode, cc0_rtx, op0)); } else { if (CONSTANT_P (op0) && CONSTANT_P (op1)) { op0 = ensure_extended (op0, extop, test_mode); op1 = ensure_extended (op1, extop, test_mode); } else if (extop == ZERO_EXTEND && test_mode == HImode) { /* Pyramids have no unsigned "cmphi" instructions. We need to zero extend unsigned halfwords into temporary registers. */ op0 = ensure_extended (op0, extop, test_mode); op1 = ensure_extended (op1, extop, test_mode); } else if (CONSTANT_P (op0)) { op0 = ensure_extended (op0, extop, test_mode); op1 = ensure_extended (op1, extop, test_mode); } else if (CONSTANT_P (op1)) { op1 = ensure_extended (op1, extop, test_mode); op0 = ensure_extended (op0, extop, test_mode); } else if ((code0 == REG || code0 == SUBREG) && (code1 == REG || code1 == SUBREG)) { /* I could do this case without extension, by using the virtual register address (but that would lose for global regs). */ op0 = ensure_extended (op0, extop, test_mode); op1 = ensure_extended (op1, extop, test_mode); } else if (code0 == MEM && code1 == MEM) { /* Load into a reg if the address combination can't be handled directly. */ if (! weird_memory_memory (op0, op1)) op0 = force_reg (test_mode, op0); } emit_insn (gen_rtx (SET, VOIDmode, cc0_rtx, gen_rtx (COMPARE, VOIDmode, op0, op1))); } } /* Return non-zero if the two single-word moves with operands[0] and operands[1] for the first single-word move, and operands[2] and operands[3] for the second single-word move, is possible to combine to a double word move. The criterion is whether the operands are in consecutive memory cells, registers, etc. */ int movdi_possible (operands) rtx operands[]; { int cnst_diff0, cnst_diff1; RTX_CODE code0 = GET_CODE (operands[0]); RTX_CODE code1 = GET_CODE (operands[1]); /* Don't dare to combine (possibly overlapping) memory -> memory moves. */ /* It would be possible to detect the cases where we dare, by using constant_diff (operands[0], operands[1])!!! */ if (code0 == MEM && code1 == MEM) return 0; cnst_diff0 = consecutive_operands (operands[0], operands[2]); if (cnst_diff0 == 0) return 0; cnst_diff1 = consecutive_operands (operands[1], operands[3]); if (cnst_diff1 == 0) return 0; if (cnst_diff0 & cnst_diff1) { /* The source and destination operands are consecutive. */ /* If the first move writes into the source of the second move, we cannot combine. */ if ((code0 == REG && reg_overlap_mentioned_p (operands[0], operands[3])) || (code0 == SUBREG && subreg_overlap_mentioned_p (operands[0], operands[3]))) return 0; if (cnst_diff0 & 1) /* operands[0],[1] has higher addresses than operands[2],[3]. */ swap_operands = 0; else /* operands[0],[1] has lower addresses than operands[2],[3]. */ swap_operands = 1; return 1; } return 0; } /* Like reg_overlap_mentioned_p, but accepts a subreg rtx instead of a reg. */ int subreg_overlap_mentioned_p (subreg, x) rtx subreg, x; { rtx reg = SUBREG_REG (subreg); int regno = REGNO (reg) + SUBREG_WORD (subreg); int endregno = regno + HARD_REGNO_NREGS (regno, GET_MODE (subreg)); return refers_to_regno_p (regno, endregno, x, 0); } /* Return 1 if OP0 is a consecutive operand to OP1, 2 if OP1 is a consecutive operand to OP0. This function is used to determine if addresses are consecutive, and therefore possible to combine to fewer instructions. */ int consecutive_operands (op0, op1) rtx op0, op1; { RTX_CODE code0, code1; int cnst_diff; int regno_off0, regno_off1; code0 = GET_CODE (op0); code1 = GET_CODE (op1); regno_off0 = 0; if (code0 == SUBREG) { if (GET_MODE_SIZE (GET_MODE (SUBREG_REG (op0))) <= UNITS_PER_WORD) return 0; regno_off0 = SUBREG_WORD (op0); op0 = SUBREG_REG (op0); code0 = REG; } regno_off1 = 0; if (code1 == SUBREG) { if (GET_MODE_SIZE (GET_MODE (SUBREG_REG (op1))) <= UNITS_PER_WORD) return 0; regno_off1 = SUBREG_WORD (op1); op1 = SUBREG_REG (op1); code1 = REG; } if (code0 != code1) return 0; switch (code0) { case CONST_INT: /* Cannot permit any symbolic constants, even if the consecutive operand is 0, since a movl really performs sign extension. */ if (code1 != CONST_INT) return 0; if ((INTVAL (op0) == 0 && INTVAL (op1) == 0) || (INTVAL (op0) == -1 && INTVAL (op1) == -1)) return 3; if ((INTVAL (op0) == 0 && INTVAL (op1) > 0) || (INTVAL (op0) == -1 && INTVAL (op1) < 0)) return 2; if ((INTVAL (op1) == 0 && INTVAL (op0) > 0) || (INTVAL (op1) == -1 && INTVAL (op0) < 0)) return 1; break; case REG: regno_off0 = REGNO (op0) + regno_off0; regno_off1 = REGNO (op1) + regno_off1; cnst_diff = regno_off0 - regno_off1; if (cnst_diff == 1) { /* movl with the highest numbered parameter (local) register as source or destination, doesn't wrap to the lowest numbered local (temporary) register. */ if (regno_off0 % 16 != 0) return 1; else return 0; } else if (cnst_diff == -1) { if (regno_off1 % 16 != 0) return 2; else return 0; } break; case MEM: op0 = XEXP (op0, 0); op1 = XEXP (op1, 0); if (GET_CODE (op0) == CONST) op0 = XEXP (op0, 0); if (GET_CODE (op1) == CONST) op1 = XEXP (op1, 0); cnst_diff = constant_diff (op0, op1); if (cnst_diff) { if (cnst_diff == 4) return 1; else if (cnst_diff == -4) return 2; } break; } return 0; } /* Return the constant difference of the rtx expressions OP0 and OP1, or 0 if they don't have a constant difference. This function is used to determine if addresses are consecutive, and therefore possible to combine to fewer instructions. */ int constant_diff (op0, op1) rtx op0, op1; { RTX_CODE code0, code1; int cnst_diff; code0 = GET_CODE (op0); code1 = GET_CODE (op1); if (code0 != code1) { if (code0 == PLUS) { if (GET_CODE (XEXP (op0, 1)) == CONST_INT && rtx_equal_p (op1, XEXP (op0, 0))) return INTVAL (XEXP (op0, 1)); } else if (code1 == PLUS) { if (GET_CODE (XEXP (op1, 1)) == CONST_INT && rtx_equal_p (op0, XEXP (op1, 0))) return -INTVAL (XEXP (op1, 1)); } return 0; } if (code0 == CONST_INT) return INTVAL (op0) - INTVAL (op1); if (code0 == PLUS) { cnst_diff = constant_diff (XEXP (op0, 0), XEXP (op1, 0)); if (cnst_diff) return (rtx_equal_p (XEXP (op0, 1), XEXP (op1, 1))) ? cnst_diff : 0; cnst_diff = constant_diff (XEXP (op0, 1), XEXP (op1, 1)); if (cnst_diff) return (rtx_equal_p (XEXP (op0, 0), XEXP (op1, 0))) ? cnst_diff : 0; } return 0; } int already_sign_extended (insn, from_mode, op) rtx insn; enum machine_mode from_mode; rtx op; { rtx xinsn, xdest, xsrc; for (;;) { insn = PREV_INSN (insn); if (insn == 0) return 0; if (GET_CODE (insn) == NOTE || GET_CODE (insn) == JUMP_INSN) continue; if (GET_CODE (insn) == CALL_INSN && ! call_used_regs[REGNO (op)]) continue; if (GET_CODE (insn) != INSN) return 0; xinsn = PATTERN (insn); if (GET_CODE (xinsn) != SET) return 0; xdest = SET_DEST (xinsn); xsrc = SET_SRC (xinsn); if (GET_CODE (xdest) == SUBREG) abort (); if ( ! REG_P (xdest)) continue; if (REGNO (op) == REGNO (xdest) && ((GET_CODE (xsrc) == SIGN_EXTEND && GET_MODE (XEXP (xsrc, 0)) == from_mode) || (GET_CODE (xsrc) == MEM && GET_MODE (xsrc) == from_mode))) return 1; /* The register is modified by another operation. */ if (reg_overlap_mentioned_p (xdest, op)) return 0; } } char * output_move_double (operands) rtx *operands; { if (GET_CODE (operands[1]) == CONST_DOUBLE) { if (GET_MODE_CLASS (GET_MODE (operands[1])) == MODE_INT) { /* In an integer, the low-order word is in CONST_DOUBLE_LOW. */ rtx const_op = operands[1]; if ((CONST_DOUBLE_HIGH (const_op) == 0 && CONST_DOUBLE_LOW (const_op) >= 0) || (CONST_DOUBLE_HIGH (const_op) == -1 && CONST_DOUBLE_LOW (const_op) < 0)) { operands[1] = gen_rtx (CONST_INT, VOIDmode, CONST_DOUBLE_LOW (const_op)); return "movl %1,%0"; } operands[1] = gen_rtx (CONST_INT, VOIDmode, CONST_DOUBLE_HIGH (const_op)); output_asm_insn ("movw %1,%0", operands); operands[0] = gen_rtx (REG, SImode, REGNO (operands[0]) + 1); operands[1] = gen_rtx (CONST_INT, VOIDmode, CONST_DOUBLE_LOW (const_op)); return "movw %1,%0"; } else { /* In a real, the low-address word is in CONST_DOUBLE_LOW. */ rtx const_op = operands[1]; if ((CONST_DOUBLE_LOW (const_op) == 0 && CONST_DOUBLE_HIGH (const_op) >= 0) || (CONST_DOUBLE_LOW (const_op) == -1 && CONST_DOUBLE_HIGH (const_op) < 0)) { operands[1] = gen_rtx (CONST_INT, VOIDmode, CONST_DOUBLE_HIGH (const_op)); return "movl %1,%0"; } operands[1] = gen_rtx (CONST_INT, VOIDmode, CONST_DOUBLE_LOW (const_op)); output_asm_insn ("movw %1,%0", operands); operands[0] = gen_rtx (REG, SImode, REGNO (operands[0]) + 1); operands[1] = gen_rtx (CONST_INT, VOIDmode, CONST_DOUBLE_HIGH (const_op)); return "movw %1,%0"; } } return "movl %1,%0"; } /* Output a shift insns, after having reduced integer arguments to avoid as warnings. */ char * output_shift (pattern, op2, mod) char *pattern; rtx op2; int mod; { if (GET_CODE (op2) == CONST_INT) { int cnt = INTVAL (op2) % mod; if (cnt == 0) { cc_status = cc_prev_status; return ""; } op2 = gen_rtx (CONST_INT, VOIDmode, cnt); } return pattern; } /* Return non-zero if the code of this rtx pattern is a relop. */ int relop (op, mode) rtx op; enum machine_mode mode; { switch (GET_CODE (op)) { case EQ: case NE: case LT: case LE: case GE: case GT: case LTU: case LEU: case GEU: case GTU: return 1; } return 0; } void notice_update_cc (EXP, INSN) rtx EXP, INSN; { switch (GET_CODE (EXP)) { case SET: switch (GET_CODE (SET_DEST (EXP))) { case CC0: cc_status.mdep = 0; cc_status.flags = 0; cc_status.value1 = 0; cc_status.value2 = SET_SRC (EXP); break; case PC: break; case REG: switch (GET_CODE (SET_SRC (EXP))) { case CALL: goto call; case MEM: if (GET_MODE (SET_SRC (EXP)) == QImode || GET_MODE (SET_SRC (EXP)) == HImode) { cc_status.mdep = 0; cc_status.flags = CC_NO_OVERFLOW; cc_status.value1 = SET_DEST (EXP); cc_status.value2 = SET_SRC (EXP); break; } /* else: Fall through. */ case CONST_INT: case SYMBOL_REF: case LABEL_REF: case CONST: case CONST_DOUBLE: case REG: if (cc_status.value1 && reg_overlap_mentioned_p (SET_DEST (EXP), cc_status.value1)) cc_status.value1 = 0; if (cc_status.value2 && reg_overlap_mentioned_p (SET_DEST (EXP), cc_status.value2)) cc_status.value2 = 0; break; case UDIV: case UMOD: cc_status.mdep = CC_VALID_FOR_UNSIGNED; cc_status.flags = CC_NO_OVERFLOW; cc_status.value1 = SET_DEST (EXP); cc_status.value2 = SET_SRC (EXP); break; default: cc_status.mdep = 0; cc_status.flags = CC_NO_OVERFLOW; cc_status.value1 = SET_DEST (EXP); cc_status.value2 = SET_SRC (EXP); break; } break; case MEM: switch (GET_CODE (SET_SRC (EXP))) { case REG: if (GET_MODE (SET_SRC (EXP)) == QImode || GET_MODE (SET_SRC (EXP)) == HImode) { cc_status.flags = CC_NO_OVERFLOW; cc_status.value1 = SET_DEST (EXP); cc_status.value2 = SET_SRC (EXP); cc_status.mdep = 0; break; } /* else: Fall through. */ case CONST_INT: case SYMBOL_REF: case LABEL_REF: case CONST: case CONST_DOUBLE: case MEM: /* Need to forget cc_status about memory positions each time a memory store is made, even if the memory store insns in question doesn't modify the condition codes. */ if (cc_status.value1 && GET_CODE (cc_status.value1) == MEM) cc_status.value1 = 0; if (cc_status.value2 && GET_CODE (cc_status.value2) == MEM) cc_status.value2 = 0; break; case SIGN_EXTEND: case FLOAT_EXTEND: case FLOAT_TRUNCATE: case FLOAT: case FIX: cc_status.flags = CC_NO_OVERFLOW; cc_status.value1 = SET_DEST (EXP); cc_status.value2 = SET_SRC (EXP); cc_status.mdep = 0; break; default: abort (); } break; default: abort (); } break; case CALL: call: CC_STATUS_INIT; break; /* Do calls preserve the condition codes? (At least forget cc_status expressions if they refer to registers not preserved across calls. Also forget expressions about memory contents.) */ if (cc_status.value1 && (refers_to_regno_p (PYR_TREG (0), PYR_TREG (15), cc_status.value1, 0) || GET_CODE (cc_status.value1) == MEM)) cc_status.value1 = 0; if (cc_status.value2 && (refers_to_regno_p (PYR_TREG (0), PYR_TREG (15), cc_status.value2, 0) || GET_CODE (cc_status.value2) == MEM)) cc_status.value2 = 0; break; default: CC_STATUS_INIT; } } void forget_cc_if_dependent (op) rtx op; { cc_status = cc_prev_status; if (cc_status.value1 && reg_overlap_mentioned_p (op, cc_status.value1)) cc_status.value1 = 0; if (cc_status.value2 && reg_overlap_mentioned_p (op, cc_status.value2)) cc_status.value2 = 0; }