4.4BSD/usr/src/contrib/gcc-2.3.3/emit-rtl.c
/* Emit RTL for the GNU C-Compiler expander.
Copyright (C) 1987, 1988, 1992 Free Software Foundation, Inc.
This file is part of GNU CC.
GNU CC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
GNU CC is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with GNU CC; see the file COPYING. If not, write to
the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
/* Middle-to-low level generation of rtx code and insns.
This file contains the functions `gen_rtx', `gen_reg_rtx'
and `gen_label_rtx' that are the usual ways of creating rtl
expressions for most purposes.
It also has the functions for creating insns and linking
them in the doubly-linked chain.
The patterns of the insns are created by machine-dependent
routines in insn-emit.c, which is generated automatically from
the machine description. These routines use `gen_rtx' to make
the individual rtx's of the pattern; what is machine dependent
is the kind of rtx's they make and what arguments they use. */
#include "config.h"
#include "gvarargs.h"
#include "rtl.h"
#include "flags.h"
#include "function.h"
#include "expr.h"
#include "regs.h"
#include "insn-config.h"
#include "real.h"
#include <stdio.h>
/* This is reset to LAST_VIRTUAL_REGISTER + 1 at the start of each function.
After rtl generation, it is 1 plus the largest register number used. */
int reg_rtx_no = LAST_VIRTUAL_REGISTER + 1;
/* This is *not* reset after each function. It gives each CODE_LABEL
in the entire compilation a unique label number. */
static int label_num = 1;
/* Lowest label number in current function. */
static int first_label_num;
/* Highest label number in current function.
Zero means use the value of label_num instead.
This is nonzero only when belatedly compiling an inline function. */
static int last_label_num;
/* Value label_num had when set_new_first_and_last_label_number was called.
If label_num has not changed since then, last_label_num is valid. */
static int base_label_num;
/* Nonzero means do not generate NOTEs for source line numbers. */
static int no_line_numbers;
/* Commonly used rtx's, so that we only need space for one copy.
These are initialized once for the entire compilation.
All of these except perhaps the floating-point CONST_DOUBLEs
are unique; no other rtx-object will be equal to any of these. */
rtx pc_rtx; /* (PC) */
rtx cc0_rtx; /* (CC0) */
rtx cc1_rtx; /* (CC1) (not actually used nowadays) */
rtx const0_rtx; /* (CONST_INT 0) */
rtx const1_rtx; /* (CONST_INT 1) */
rtx const2_rtx; /* (CONST_INT 2) */
rtx constm1_rtx; /* (CONST_INT -1) */
rtx const_true_rtx; /* (CONST_INT STORE_FLAG_VALUE) */
/* We record floating-point CONST_DOUBLEs in each floating-point mode for
the values of 0, 1, and 2. For the integer entries and VOIDmode, we
record a copy of const[012]_rtx. */
rtx const_tiny_rtx[3][(int) MAX_MACHINE_MODE];
REAL_VALUE_TYPE dconst0;
REAL_VALUE_TYPE dconst1;
REAL_VALUE_TYPE dconst2;
REAL_VALUE_TYPE dconstm1;
/* All references to the following fixed hard registers go through
these unique rtl objects. On machines where the frame-pointer and
arg-pointer are the same register, they use the same unique object.
After register allocation, other rtl objects which used to be pseudo-regs
may be clobbered to refer to the frame-pointer register.
But references that were originally to the frame-pointer can be
distinguished from the others because they contain frame_pointer_rtx.
In an inline procedure, the stack and frame pointer rtxs may not be
used for anything else. */
rtx stack_pointer_rtx; /* (REG:Pmode STACK_POINTER_REGNUM) */
rtx frame_pointer_rtx; /* (REG:Pmode FRAME_POINTER_REGNUM) */
rtx arg_pointer_rtx; /* (REG:Pmode ARG_POINTER_REGNUM) */
rtx struct_value_rtx; /* (REG:Pmode STRUCT_VALUE_REGNUM) */
rtx struct_value_incoming_rtx; /* (REG:Pmode STRUCT_VALUE_INCOMING_REGNUM) */
rtx static_chain_rtx; /* (REG:Pmode STATIC_CHAIN_REGNUM) */
rtx static_chain_incoming_rtx; /* (REG:Pmode STATIC_CHAIN_INCOMING_REGNUM) */
rtx pic_offset_table_rtx; /* (REG:Pmode PIC_OFFSET_TABLE_REGNUM) */
rtx virtual_incoming_args_rtx; /* (REG:Pmode VIRTUAL_INCOMING_ARGS_REGNUM) */
rtx virtual_stack_vars_rtx; /* (REG:Pmode VIRTUAL_STACK_VARS_REGNUM) */
rtx virtual_stack_dynamic_rtx; /* (REG:Pmode VIRTUAL_STACK_DYNAMIC_REGNUM) */
rtx virtual_outgoing_args_rtx; /* (REG:Pmode VIRTUAL_OUTGOING_ARGS_REGNUM) */
/* We make one copy of (const_int C) where C is in
[- MAX_SAVED_CONST_INT, MAX_SAVED_CONST_INT]
to save space during the compilation and simplify comparisons of
integers. */
#define MAX_SAVED_CONST_INT 64
static rtx const_int_rtx[MAX_SAVED_CONST_INT * 2 + 1];
/* The ends of the doubly-linked chain of rtl for the current function.
Both are reset to null at the start of rtl generation for the function.
start_sequence saves both of these on `sequence_stack' and then
starts a new, nested sequence of insns. */
static rtx first_insn = NULL;
static rtx last_insn = NULL;
/* INSN_UID for next insn emitted.
Reset to 1 for each function compiled. */
static int cur_insn_uid = 1;
/* Line number and source file of the last line-number NOTE emitted.
This is used to avoid generating duplicates. */
static int last_linenum = 0;
static char *last_filename = 0;
/* A vector indexed by pseudo reg number. The allocated length
of this vector is regno_pointer_flag_length. Since this
vector is needed during the expansion phase when the total
number of registers in the function is not yet known,
it is copied and made bigger when necessary. */
char *regno_pointer_flag;
int regno_pointer_flag_length;
/* Indexed by pseudo register number, gives the rtx for that pseudo.
Allocated in parallel with regno_pointer_flag. */
rtx *regno_reg_rtx;
/* Stack of pending (incomplete) sequences saved by `start_sequence'.
Each element describes one pending sequence.
The main insn-chain is saved in the last element of the chain,
unless the chain is empty. */
struct sequence_stack *sequence_stack;
/* start_sequence and gen_sequence can make a lot of rtx expressions which are
shortly thrown away. We use two mechanisms to prevent this waste:
First, we keep a list of the expressions used to represent the sequence
stack in sequence_element_free_list.
Second, for sizes up to 5 elements, we keep a SEQUENCE and its associated
rtvec for use by gen_sequence. One entry for each size is sufficient
because most cases are calls to gen_sequence followed by immediately
emitting the SEQUENCE. Reuse is safe since emitting a sequence is
destructive on the insn in it anyway and hence can't be redone.
We do not bother to save this cached data over nested function calls.
Instead, we just reinitialize them. */
#define SEQUENCE_RESULT_SIZE 5
static struct sequence_stack *sequence_element_free_list;
static rtx sequence_result[SEQUENCE_RESULT_SIZE];
extern int rtx_equal_function_value_matters;
/* Filename and line number of last line-number note,
whether we actually emitted it or not. */
extern char *emit_filename;
extern int emit_lineno;
rtx change_address ();
void init_emit ();
/* rtx gen_rtx (code, mode, [element1, ..., elementn])
**
** This routine generates an RTX of the size specified by
** <code>, which is an RTX code. The RTX structure is initialized
** from the arguments <element1> through <elementn>, which are
** interpreted according to the specific RTX type's format. The
** special machine mode associated with the rtx (if any) is specified
** in <mode>.
**
** gen_rtx() can be invoked in a way which resembles the lisp-like
** rtx it will generate. For example, the following rtx structure:
**
** (plus:QI (mem:QI (reg:SI 1))
** (mem:QI (plusw:SI (reg:SI 2) (reg:SI 3))))
**
** ...would be generated by the following C code:
**
** gen_rtx (PLUS, QImode,
** gen_rtx (MEM, QImode,
** gen_rtx (REG, SImode, 1)),
** gen_rtx (MEM, QImode,
** gen_rtx (PLUS, SImode,
** gen_rtx (REG, SImode, 2),
** gen_rtx (REG, SImode, 3)))),
*/
/*VARARGS2*/
rtx
gen_rtx (va_alist)
va_dcl
{
va_list p;
enum rtx_code code;
enum machine_mode mode;
register int i; /* Array indices... */
register char *fmt; /* Current rtx's format... */
register rtx rt_val; /* RTX to return to caller... */
va_start (p);
code = va_arg (p, enum rtx_code);
mode = va_arg (p, enum machine_mode);
if (code == CONST_INT)
{
HOST_WIDE_INT arg = va_arg (p, HOST_WIDE_INT);
if (arg >= - MAX_SAVED_CONST_INT && arg <= MAX_SAVED_CONST_INT)
return const_int_rtx[arg + MAX_SAVED_CONST_INT];
if (const_true_rtx && arg == STORE_FLAG_VALUE)
return const_true_rtx;
rt_val = rtx_alloc (code);
INTVAL (rt_val) = arg;
}
else if (code == REG)
{
int regno = va_arg (p, int);
/* In case the MD file explicitly references the frame pointer, have
all such references point to the same frame pointer. This is used
during frame pointer elimination to distinguish the explicit
references to these registers from pseudos that happened to be
assigned to them.
If we have eliminated the frame pointer or arg pointer, we will
be using it as a normal register, for example as a spill register.
In such cases, we might be accessing it in a mode that is not
Pmode and therefore cannot use the pre-allocated rtx.
Also don't do this when we are making new REGs in reload,
since we don't want to get confused with the real pointers. */
if (frame_pointer_rtx && regno == FRAME_POINTER_REGNUM && mode == Pmode
&& ! reload_in_progress)
return frame_pointer_rtx;
#if FRAME_POINTER_REGNUM != ARG_POINTER_REGNUM
if (arg_pointer_rtx && regno == ARG_POINTER_REGNUM && mode == Pmode
&& ! reload_in_progress)
return arg_pointer_rtx;
#endif
if (stack_pointer_rtx && regno == STACK_POINTER_REGNUM && mode == Pmode
&& ! reload_in_progress)
return stack_pointer_rtx;
else
{
rt_val = rtx_alloc (code);
rt_val->mode = mode;
REGNO (rt_val) = regno;
return rt_val;
}
}
else
{
rt_val = rtx_alloc (code); /* Allocate the storage space. */
rt_val->mode = mode; /* Store the machine mode... */
fmt = GET_RTX_FORMAT (code); /* Find the right format... */
for (i = 0; i < GET_RTX_LENGTH (code); i++)
{
switch (*fmt++)
{
case '0': /* Unused field. */
break;
case 'i': /* An integer? */
XINT (rt_val, i) = va_arg (p, int);
break;
case 'w': /* A wide integer? */
XWINT (rt_val, i) = va_arg (p, HOST_WIDE_INT);
break;
case 's': /* A string? */
XSTR (rt_val, i) = va_arg (p, char *);
break;
case 'e': /* An expression? */
case 'u': /* An insn? Same except when printing. */
XEXP (rt_val, i) = va_arg (p, rtx);
break;
case 'E': /* An RTX vector? */
XVEC (rt_val, i) = va_arg (p, rtvec);
break;
default:
abort();
}
}
}
va_end (p);
return rt_val; /* Return the new RTX... */
}
/* gen_rtvec (n, [rt1, ..., rtn])
**
** This routine creates an rtvec and stores within it the
** pointers to rtx's which are its arguments.
*/
/*VARARGS1*/
rtvec
gen_rtvec (va_alist)
va_dcl
{
int n, i;
va_list p;
rtx *vector;
va_start (p);
n = va_arg (p, int);
if (n == 0)
return NULL_RTVEC; /* Don't allocate an empty rtvec... */
vector = (rtx *) alloca (n * sizeof (rtx));
for (i = 0; i < n; i++)
vector[i] = va_arg (p, rtx);
va_end (p);
return gen_rtvec_v (n, vector);
}
rtvec
gen_rtvec_v (n, argp)
int n;
rtx *argp;
{
register int i;
register rtvec rt_val;
if (n == 0)
return NULL_RTVEC; /* Don't allocate an empty rtvec... */
rt_val = rtvec_alloc (n); /* Allocate an rtvec... */
for (i = 0; i < n; i++)
rt_val->elem[i].rtx = *argp++;
return rt_val;
}
/* Generate a REG rtx for a new pseudo register of mode MODE.
This pseudo is assigned the next sequential register number. */
rtx
gen_reg_rtx (mode)
enum machine_mode mode;
{
register rtx val;
/* Don't let anything called by or after reload create new registers
(actually, registers can't be created after flow, but this is a good
approximation). */
if (reload_in_progress || reload_completed)
abort ();
/* Make sure regno_pointer_flag and regno_reg_rtx are large
enough to have an element for this pseudo reg number. */
if (reg_rtx_no == regno_pointer_flag_length)
{
rtx *new1;
char *new =
(char *) oballoc (regno_pointer_flag_length * 2);
bzero (new, regno_pointer_flag_length * 2);
bcopy (regno_pointer_flag, new, regno_pointer_flag_length);
regno_pointer_flag = new;
new1 = (rtx *) oballoc (regno_pointer_flag_length * 2 * sizeof (rtx));
bzero (new1, regno_pointer_flag_length * 2 * sizeof (rtx));
bcopy (regno_reg_rtx, new1, regno_pointer_flag_length * sizeof (rtx));
regno_reg_rtx = new1;
regno_pointer_flag_length *= 2;
}
val = gen_rtx (REG, mode, reg_rtx_no);
regno_reg_rtx[reg_rtx_no++] = val;
return val;
}
/* Identify REG as a probable pointer register. */
void
mark_reg_pointer (reg)
rtx reg;
{
REGNO_POINTER_FLAG (REGNO (reg)) = 1;
}
/* Return 1 plus largest pseudo reg number used in the current function. */
int
max_reg_num ()
{
return reg_rtx_no;
}
/* Return 1 + the largest label number used so far in the current function. */
int
max_label_num ()
{
if (last_label_num && label_num == base_label_num)
return last_label_num;
return label_num;
}
/* Return first label number used in this function (if any were used). */
int
get_first_label_num ()
{
return first_label_num;
}
/* Return a value representing some low-order bits of X, where the number
of low-order bits is given by MODE. Note that no conversion is done
between floating-point and fixed-point values, rather, the bit
representation is returned.
This function handles the cases in common between gen_lowpart, below,
and two variants in cse.c and combine.c. These are the cases that can
be safely handled at all points in the compilation.
If this is not a case we can handle, return 0. */
rtx
gen_lowpart_common (mode, x)
enum machine_mode mode;
register rtx x;
{
int word = 0;
if (GET_MODE (x) == mode)
return x;
/* MODE must occupy no more words than the mode of X. */
if (GET_MODE (x) != VOIDmode
&& ((GET_MODE_SIZE (mode) + (UNITS_PER_WORD - 1)) / UNITS_PER_WORD
> ((GET_MODE_SIZE (GET_MODE (x)) + (UNITS_PER_WORD - 1))
/ UNITS_PER_WORD)))
return 0;
if (WORDS_BIG_ENDIAN && GET_MODE_SIZE (GET_MODE (x)) > UNITS_PER_WORD)
word = ((GET_MODE_SIZE (GET_MODE (x))
- MAX (GET_MODE_SIZE (mode), UNITS_PER_WORD))
/ UNITS_PER_WORD);
if ((GET_CODE (x) == ZERO_EXTEND || GET_CODE (x) == SIGN_EXTEND)
&& (GET_MODE_CLASS (mode) == MODE_INT
|| GET_MODE_CLASS (mode) == MODE_PARTIAL_INT))
{
/* If we are getting the low-order part of something that has been
sign- or zero-extended, we can either just use the object being
extended or make a narrower extension. If we want an even smaller
piece than the size of the object being extended, call ourselves
recursively.
This case is used mostly by combine and cse. */
if (GET_MODE (XEXP (x, 0)) == mode)
return XEXP (x, 0);
else if (GET_MODE_SIZE (mode) < GET_MODE_SIZE (GET_MODE (XEXP (x, 0))))
return gen_lowpart_common (mode, XEXP (x, 0));
else if (GET_MODE_SIZE (mode) < GET_MODE_SIZE (GET_MODE (x)))
return gen_rtx (GET_CODE (x), mode, XEXP (x, 0));
}
else if (GET_CODE (x) == SUBREG
&& (GET_MODE_SIZE (mode) <= UNITS_PER_WORD
|| GET_MODE_SIZE (mode) == GET_MODE_UNIT_SIZE (GET_MODE (x))))
return (GET_MODE (SUBREG_REG (x)) == mode && SUBREG_WORD (x) == 0
? SUBREG_REG (x)
: gen_rtx (SUBREG, mode, SUBREG_REG (x), SUBREG_WORD (x)));
else if (GET_CODE (x) == REG)
{
/* If the register is not valid for MODE, return 0. If we don't
do this, there is no way to fix up the resulting REG later. */
if (REGNO (x) < FIRST_PSEUDO_REGISTER
&& ! HARD_REGNO_MODE_OK (REGNO (x) + word, mode))
return 0;
else if (REGNO (x) < FIRST_PSEUDO_REGISTER
/* integrate.c can't handle parts of a return value register. */
&& (! REG_FUNCTION_VALUE_P (x)
|| ! rtx_equal_function_value_matters)
/* We want to keep the stack, frame, and arg pointers
special. */
&& REGNO (x) != FRAME_POINTER_REGNUM
#if FRAME_POINTER_REGNUM != ARG_POINTER_REGNUM
&& REGNO (x) != ARG_POINTER_REGNUM
#endif
&& REGNO (x) != STACK_POINTER_REGNUM)
return gen_rtx (REG, mode, REGNO (x) + word);
else
return gen_rtx (SUBREG, mode, x, word);
}
/* If X is a CONST_INT or a CONST_DOUBLE, extract the appropriate bits
from the low-order part of the constant. */
else if ((GET_MODE_CLASS (mode) == MODE_INT
|| GET_MODE_CLASS (mode) == MODE_PARTIAL_INT)
&& GET_MODE (x) == VOIDmode
&& (GET_CODE (x) == CONST_INT || GET_CODE (x) == CONST_DOUBLE))
{
/* If MODE is twice the host word size, X is already the desired
representation. Otherwise, if MODE is wider than a word, we can't
do this. If MODE is exactly a word, return just one CONST_INT.
If MODE is smaller than a word, clear the bits that don't belong
in our mode, unless they and our sign bit are all one. So we get
either a reasonable negative value or a reasonable unsigned value
for this mode. */
if (GET_MODE_BITSIZE (mode) == 2 * HOST_BITS_PER_WIDE_INT)
return x;
else if (GET_MODE_BITSIZE (mode) > HOST_BITS_PER_WIDE_INT)
return 0;
else if (GET_MODE_BITSIZE (mode) == HOST_BITS_PER_WIDE_INT)
return (GET_CODE (x) == CONST_INT ? x
: GEN_INT (CONST_DOUBLE_LOW (x)));
else
{
/* MODE must be narrower than HOST_BITS_PER_INT. */
int width = GET_MODE_BITSIZE (mode);
HOST_WIDE_INT val = (GET_CODE (x) == CONST_INT ? INTVAL (x)
: CONST_DOUBLE_LOW (x));
if (((val & ((HOST_WIDE_INT) (-1) << (width - 1)))
!= ((HOST_WIDE_INT) (-1) << (width - 1))))
val &= ((HOST_WIDE_INT) 1 << width) - 1;
return (GET_CODE (x) == CONST_INT && INTVAL (x) == val ? x
: GEN_INT (val));
}
}
/* If X is an integral constant but we want it in floating-point, it
must be the case that we have a union of an integer and a floating-point
value. If the machine-parameters allow it, simulate that union here
and return the result. The two-word and single-word cases are
different. */
else if (((HOST_FLOAT_FORMAT == TARGET_FLOAT_FORMAT
&& HOST_BITS_PER_WIDE_INT == BITS_PER_WORD)
|| flag_pretend_float)
&& GET_MODE_CLASS (mode) == MODE_FLOAT
&& GET_MODE_SIZE (mode) == UNITS_PER_WORD
&& GET_CODE (x) == CONST_INT
&& sizeof (float) * HOST_BITS_PER_CHAR == HOST_BITS_PER_WIDE_INT)
{
union {HOST_WIDE_INT i; float d; } u;
u.i = INTVAL (x);
return immed_real_const_1 (u.d, mode);
}
else if (((HOST_FLOAT_FORMAT == TARGET_FLOAT_FORMAT
&& HOST_BITS_PER_WIDE_INT == BITS_PER_WORD)
|| flag_pretend_float)
&& GET_MODE_CLASS (mode) == MODE_FLOAT
&& GET_MODE_SIZE (mode) == 2 * UNITS_PER_WORD
&& (GET_CODE (x) == CONST_INT || GET_CODE (x) == CONST_DOUBLE)
&& GET_MODE (x) == VOIDmode
&& (sizeof (double) * HOST_BITS_PER_CHAR
== 2 * HOST_BITS_PER_WIDE_INT))
{
union {HOST_WIDE_INT i[2]; double d; } u;
HOST_WIDE_INT low, high;
if (GET_CODE (x) == CONST_INT)
low = INTVAL (x), high = low >> (HOST_BITS_PER_WIDE_INT -1);
else
low = CONST_DOUBLE_LOW (x), high = CONST_DOUBLE_HIGH (x);
#ifdef HOST_WORDS_BIG_ENDIAN
u.i[0] = high, u.i[1] = low;
#else
u.i[0] = low, u.i[1] = high;
#endif
return immed_real_const_1 (u.d, mode);
}
/* Similarly, if this is converting a floating-point value into a
single-word integer. Only do this is the host and target parameters are
compatible. */
else if (((HOST_FLOAT_FORMAT == TARGET_FLOAT_FORMAT
&& HOST_BITS_PER_WIDE_INT == BITS_PER_WORD)
|| flag_pretend_float)
&& (GET_MODE_CLASS (mode) == MODE_INT
|| GET_MODE_CLASS (mode) == MODE_PARTIAL_INT)
&& GET_CODE (x) == CONST_DOUBLE
&& GET_MODE_CLASS (GET_MODE (x)) == MODE_FLOAT
&& GET_MODE_BITSIZE (mode) == BITS_PER_WORD)
return operand_subword (x, 0, 0, GET_MODE (x));
/* Similarly, if this is converting a floating-point value into a
two-word integer, we can do this one word at a time and make an
integer. Only do this is the host and target parameters are
compatible. */
else if (((HOST_FLOAT_FORMAT == TARGET_FLOAT_FORMAT
&& HOST_BITS_PER_WIDE_INT == BITS_PER_WORD)
|| flag_pretend_float)
&& (GET_MODE_CLASS (mode) == MODE_INT
|| GET_MODE_CLASS (mode) == MODE_PARTIAL_INT)
&& GET_CODE (x) == CONST_DOUBLE
&& GET_MODE_CLASS (GET_MODE (x)) == MODE_FLOAT
&& GET_MODE_BITSIZE (mode) == 2 * BITS_PER_WORD)
{
rtx lowpart = operand_subword (x, WORDS_BIG_ENDIAN, 0, GET_MODE (x));
rtx highpart = operand_subword (x, ! WORDS_BIG_ENDIAN, 0, GET_MODE (x));
if (lowpart && GET_CODE (lowpart) == CONST_INT
&& highpart && GET_CODE (highpart) == CONST_INT)
return immed_double_const (INTVAL (lowpart), INTVAL (highpart), mode);
}
/* Otherwise, we can't do this. */
return 0;
}
/* Return the real part (which has mode MODE) of a complex value X.
This always comes at the low address in memory. */
rtx
gen_realpart (mode, x)
enum machine_mode mode;
register rtx x;
{
if (WORDS_BIG_ENDIAN)
return gen_highpart (mode, x);
else
return gen_lowpart (mode, x);
}
/* Return the imaginary part (which has mode MODE) of a complex value X.
This always comes at the high address in memory. */
rtx
gen_imagpart (mode, x)
enum machine_mode mode;
register rtx x;
{
if (WORDS_BIG_ENDIAN)
return gen_lowpart (mode, x);
else
return gen_highpart (mode, x);
}
/* Assuming that X is an rtx (e.g., MEM, REG or SUBREG) for a value,
return an rtx (MEM, SUBREG, or CONST_INT) that refers to the
least-significant part of X.
MODE specifies how big a part of X to return;
it usually should not be larger than a word.
If X is a MEM whose address is a QUEUED, the value may be so also. */
rtx
gen_lowpart (mode, x)
enum machine_mode mode;
register rtx x;
{
rtx result = gen_lowpart_common (mode, x);
if (result)
return result;
else if (GET_CODE (x) == MEM)
{
/* The only additional case we can do is MEM. */
register int offset = 0;
if (WORDS_BIG_ENDIAN)
offset = (MAX (GET_MODE_SIZE (GET_MODE (x)), UNITS_PER_WORD)
- MAX (GET_MODE_SIZE (mode), UNITS_PER_WORD));
if (BYTES_BIG_ENDIAN)
/* Adjust the address so that the address-after-the-data
is unchanged. */
offset -= (MIN (UNITS_PER_WORD, GET_MODE_SIZE (mode))
- MIN (UNITS_PER_WORD, GET_MODE_SIZE (GET_MODE (x))));
return change_address (x, mode, plus_constant (XEXP (x, 0), offset));
}
else
abort ();
}
/* Like `gen_lowpart', but refer to the most significant part.
This is used to access the imaginary part of a complex number. */
rtx
gen_highpart (mode, x)
enum machine_mode mode;
register rtx x;
{
/* This case loses if X is a subreg. To catch bugs early,
complain if an invalid MODE is used even in other cases. */
if (GET_MODE_SIZE (mode) > UNITS_PER_WORD
&& GET_MODE_SIZE (mode) != GET_MODE_UNIT_SIZE (GET_MODE (x)))
abort ();
if (GET_CODE (x) == CONST_DOUBLE
#if !(TARGET_FLOAT_FORMAT != HOST_FLOAT_FORMAT || defined(REAL_IS_NOT_DOUBLE))
&& GET_MODE_CLASS (GET_MODE (x)) != MODE_FLOAT
#endif
)
return gen_rtx (CONST_INT, VOIDmode,
CONST_DOUBLE_HIGH (x) & GET_MODE_MASK (mode));
else if (GET_CODE (x) == CONST_INT)
return const0_rtx;
else if (GET_CODE (x) == MEM)
{
register int offset = 0;
#if !WORDS_BIG_ENDIAN
offset = (MAX (GET_MODE_SIZE (GET_MODE (x)), UNITS_PER_WORD)
- MAX (GET_MODE_SIZE (mode), UNITS_PER_WORD));
#endif
#if !BYTES_BIG_ENDIAN
if (GET_MODE_SIZE (mode) < UNITS_PER_WORD)
offset -= (GET_MODE_SIZE (mode)
- MIN (UNITS_PER_WORD,
GET_MODE_SIZE (GET_MODE (x))));
#endif
return change_address (x, mode, plus_constant (XEXP (x, 0), offset));
}
else if (GET_CODE (x) == SUBREG)
{
/* The only time this should occur is when we are looking at a
multi-word item with a SUBREG whose mode is the same as that of the
item. It isn't clear what we would do if it wasn't. */
if (SUBREG_WORD (x) != 0)
abort ();
return gen_highpart (mode, SUBREG_REG (x));
}
else if (GET_CODE (x) == REG)
{
int word = 0;
#if !WORDS_BIG_ENDIAN
if (GET_MODE_SIZE (GET_MODE (x)) > UNITS_PER_WORD)
word = ((GET_MODE_SIZE (GET_MODE (x))
- MAX (GET_MODE_SIZE (mode), UNITS_PER_WORD))
/ UNITS_PER_WORD);
#endif
if (REGNO (x) < FIRST_PSEUDO_REGISTER
/* We want to keep the stack, frame, and arg pointers special. */
&& REGNO (x) != FRAME_POINTER_REGNUM
#if FRAME_POINTER_REGNUM != ARG_POINTER_REGNUM
&& REGNO (x) != ARG_POINTER_REGNUM
#endif
&& REGNO (x) != STACK_POINTER_REGNUM)
return gen_rtx (REG, mode, REGNO (x) + word);
else
return gen_rtx (SUBREG, mode, x, word);
}
else
abort ();
}
/* Return 1 iff X, assumed to be a SUBREG,
refers to the least significant part of its containing reg.
If X is not a SUBREG, always return 1 (it is its own low part!). */
int
subreg_lowpart_p (x)
rtx x;
{
if (GET_CODE (x) != SUBREG)
return 1;
if (WORDS_BIG_ENDIAN
&& GET_MODE_SIZE (GET_MODE (SUBREG_REG (x))) > UNITS_PER_WORD)
return (SUBREG_WORD (x)
== ((GET_MODE_SIZE (GET_MODE (SUBREG_REG (x)))
- MAX (GET_MODE_SIZE (GET_MODE (x)), UNITS_PER_WORD))
/ UNITS_PER_WORD));
return SUBREG_WORD (x) == 0;
}
/* Return subword I of operand OP.
The word number, I, is interpreted as the word number starting at the
low-order address. Word 0 is the low-order word if not WORDS_BIG_ENDIAN,
otherwise it is the high-order word.
If we cannot extract the required word, we return zero. Otherwise, an
rtx corresponding to the requested word will be returned.
VALIDATE_ADDRESS is nonzero if the address should be validated. Before
reload has completed, a valid address will always be returned. After
reload, if a valid address cannot be returned, we return zero.
If VALIDATE_ADDRESS is zero, we simply form the required address; validating
it is the responsibility of the caller.
MODE is the mode of OP in case it is a CONST_INT. */
rtx
operand_subword (op, i, validate_address, mode)
rtx op;
int i;
int validate_address;
enum machine_mode mode;
{
HOST_WIDE_INT val;
int size_ratio = HOST_BITS_PER_WIDE_INT / BITS_PER_WORD;
if (mode == VOIDmode)
mode = GET_MODE (op);
if (mode == VOIDmode)
abort ();
/* If OP is narrower than a word or if we want a word outside OP, fail. */
if (mode != BLKmode
&& (GET_MODE_SIZE (mode) < UNITS_PER_WORD
|| (i + 1) * UNITS_PER_WORD > GET_MODE_SIZE (mode)))
return 0;
/* If OP is already an integer word, return it. */
if (GET_MODE_CLASS (mode) == MODE_INT
&& GET_MODE_SIZE (mode) == UNITS_PER_WORD)
return op;
/* If OP is a REG or SUBREG, we can handle it very simply. */
if (GET_CODE (op) == REG)
{
/* If the register is not valid for MODE, return 0. If we don't
do this, there is no way to fix up the resulting REG later. */
if (REGNO (op) < FIRST_PSEUDO_REGISTER
&& ! HARD_REGNO_MODE_OK (REGNO (op) + i, word_mode))
return 0;
else if (REGNO (op) >= FIRST_PSEUDO_REGISTER
|| (REG_FUNCTION_VALUE_P (op)
&& rtx_equal_function_value_matters)
/* We want to keep the stack, frame, and arg pointers
special. */
|| REGNO (op) == FRAME_POINTER_REGNUM
#if FRAME_POINTER_REGNUM != ARG_POINTER_REGNUM
|| REGNO (op) == ARG_POINTER_REGNUM
#endif
|| REGNO (op) == STACK_POINTER_REGNUM)
return gen_rtx (SUBREG, word_mode, op, i);
else
return gen_rtx (REG, word_mode, REGNO (op) + i);
}
else if (GET_CODE (op) == SUBREG)
return gen_rtx (SUBREG, word_mode, SUBREG_REG (op), i + SUBREG_WORD (op));
/* Form a new MEM at the requested address. */
if (GET_CODE (op) == MEM)
{
rtx addr = plus_constant (XEXP (op, 0), i * UNITS_PER_WORD);
rtx new;
if (validate_address)
{
if (reload_completed)
{
if (! strict_memory_address_p (word_mode, addr))
return 0;
}
else
addr = memory_address (word_mode, addr);
}
new = gen_rtx (MEM, word_mode, addr);
MEM_VOLATILE_P (new) = MEM_VOLATILE_P (op);
MEM_IN_STRUCT_P (new) = MEM_IN_STRUCT_P (op);
RTX_UNCHANGING_P (new) = RTX_UNCHANGING_P (op);
return new;
}
/* The only remaining cases are when OP is a constant. If the host and
target floating formats are the same, handling two-word floating
constants are easy. */
if (((HOST_FLOAT_FORMAT == TARGET_FLOAT_FORMAT
&& HOST_BITS_PER_WIDE_INT == BITS_PER_WORD)
|| flag_pretend_float)
&& GET_MODE_CLASS (mode) == MODE_FLOAT
&& GET_MODE_SIZE (mode) == 2 * UNITS_PER_WORD
&& GET_CODE (op) == CONST_DOUBLE)
{
/* The constant is stored in the host's word-ordering,
but we want to access it in the target's word-ordering. Some
compilers don't like a conditional inside macro args, so we have two
copies of the return. */
#ifdef HOST_WORDS_BIG_ENDIAN
return GEN_INT (i == WORDS_BIG_ENDIAN
? CONST_DOUBLE_HIGH (op) : CONST_DOUBLE_LOW (op));
#else
return GEN_INT (i != WORDS_BIG_ENDIAN
? CONST_DOUBLE_HIGH (op) : CONST_DOUBLE_LOW (op));
#endif
}
/* Single word float is a little harder, since single- and double-word
values often do not have the same high-order bits. We have already
verified that we want the only defined word of the single-word value. */
if (((HOST_FLOAT_FORMAT == TARGET_FLOAT_FORMAT
&& HOST_BITS_PER_WIDE_INT == BITS_PER_WORD)
|| flag_pretend_float)
&& GET_MODE_CLASS (mode) == MODE_FLOAT
&& GET_MODE_SIZE (mode) == UNITS_PER_WORD
&& GET_CODE (op) == CONST_DOUBLE)
{
double d;
union {float f; HOST_WIDE_INT i; } u;
REAL_VALUE_FROM_CONST_DOUBLE (d, op);
u.f = d;
return GEN_INT (u.i);
}
/* The only remaining cases that we can handle are integers.
Convert to proper endianness now since these cases need it.
At this point, i == 0 means the low-order word.
Note that it must be that BITS_PER_WORD <= HOST_BITS_PER_INT.
This is because if it were greater, it could only have been two
times greater since we do not support making wider constants. In
that case, it MODE would have already been the proper size and
it would have been handled above. This means we do not have to
worry about the case where we would be returning a CONST_DOUBLE. */
if (GET_MODE_CLASS (mode) != MODE_INT
|| (GET_CODE (op) != CONST_INT && GET_CODE (op) != CONST_DOUBLE))
return 0;
if (WORDS_BIG_ENDIAN)
i = GET_MODE_SIZE (mode) / UNITS_PER_WORD - 1 - i;
/* Find out which word on the host machine this value is in and get
it from the constant. */
val = (i / size_ratio == 0
? (GET_CODE (op) == CONST_INT ? INTVAL (op) : CONST_DOUBLE_LOW (op))
: (GET_CODE (op) == CONST_INT
? (INTVAL (op) < 0 ? ~0 : 0) : CONST_DOUBLE_HIGH (op)));
/* If BITS_PER_WORD is smaller than an int, get the appropriate bits. */
if (BITS_PER_WORD < HOST_BITS_PER_WIDE_INT)
val = ((val >> ((i % size_ratio) * BITS_PER_WORD))
& (((HOST_WIDE_INT) 1
<< (BITS_PER_WORD % HOST_BITS_PER_WIDE_INT)) - 1));
return GEN_INT (val);
}
/* Similar to `operand_subword', but never return 0. If we can't extract
the required subword, put OP into a register and try again. If that fails,
abort. We always validate the address in this case. It is not valid
to call this function after reload; it is mostly meant for RTL
generation.
MODE is the mode of OP, in case it is CONST_INT. */
rtx
operand_subword_force (op, i, mode)
rtx op;
int i;
enum machine_mode mode;
{
rtx result = operand_subword (op, i, 1, mode);
if (result)
return result;
if (mode != BLKmode && mode != VOIDmode)
op = force_reg (mode, op);
result = operand_subword (op, i, 1, mode);
if (result == 0)
abort ();
return result;
}
/* Given a compare instruction, swap the operands.
A test instruction is changed into a compare of 0 against the operand. */
void
reverse_comparison (insn)
rtx insn;
{
rtx body = PATTERN (insn);
rtx comp;
if (GET_CODE (body) == SET)
comp = SET_SRC (body);
else
comp = SET_SRC (XVECEXP (body, 0, 0));
if (GET_CODE (comp) == COMPARE)
{
rtx op0 = XEXP (comp, 0);
rtx op1 = XEXP (comp, 1);
XEXP (comp, 0) = op1;
XEXP (comp, 1) = op0;
}
else
{
rtx new = gen_rtx (COMPARE, VOIDmode,
CONST0_RTX (GET_MODE (comp)), comp);
if (GET_CODE (body) == SET)
SET_SRC (body) = new;
else
SET_SRC (XVECEXP (body, 0, 0)) = new;
}
}
/* Return a memory reference like MEMREF, but with its mode changed
to MODE and its address changed to ADDR.
(VOIDmode means don't change the mode.
NULL for ADDR means don't change the address.) */
rtx
change_address (memref, mode, addr)
rtx memref;
enum machine_mode mode;
rtx addr;
{
rtx new;
if (GET_CODE (memref) != MEM)
abort ();
if (mode == VOIDmode)
mode = GET_MODE (memref);
if (addr == 0)
addr = XEXP (memref, 0);
/* If reload is in progress or has completed, ADDR must be valid.
Otherwise, we can call memory_address to make it valid. */
if (reload_completed || reload_in_progress)
{
if (! memory_address_p (mode, addr))
abort ();
}
else
addr = memory_address (mode, addr);
new = gen_rtx (MEM, mode, addr);
MEM_VOLATILE_P (new) = MEM_VOLATILE_P (memref);
RTX_UNCHANGING_P (new) = RTX_UNCHANGING_P (memref);
MEM_IN_STRUCT_P (new) = MEM_IN_STRUCT_P (memref);
return new;
}
/* Return a newly created CODE_LABEL rtx with a unique label number. */
rtx
gen_label_rtx ()
{
register rtx label = gen_rtx (CODE_LABEL, VOIDmode, 0, 0, 0,
label_num++, NULL_PTR);
LABEL_NUSES (label) = 0;
return label;
}
/* For procedure integration. */
/* Return a newly created INLINE_HEADER rtx. Should allocate this
from a permanent obstack when the opportunity arises. */
rtx
gen_inline_header_rtx (first_insn, first_parm_insn, first_labelno,
last_labelno, max_parm_regnum, max_regnum, args_size,
pops_args, stack_slots, function_flags,
outgoing_args_size, original_arg_vector,
original_decl_initial)
rtx first_insn, first_parm_insn;
int first_labelno, last_labelno, max_parm_regnum, max_regnum, args_size;
int pops_args;
rtx stack_slots;
int function_flags;
int outgoing_args_size;
rtvec original_arg_vector;
rtx original_decl_initial;
{
rtx header = gen_rtx (INLINE_HEADER, VOIDmode,
cur_insn_uid++, NULL_RTX,
first_insn, first_parm_insn,
first_labelno, last_labelno,
max_parm_regnum, max_regnum, args_size, pops_args,
stack_slots, function_flags, outgoing_args_size,
original_arg_vector, original_decl_initial);
return header;
}
/* Install new pointers to the first and last insns in the chain.
Used for an inline-procedure after copying the insn chain. */
void
set_new_first_and_last_insn (first, last)
rtx first, last;
{
first_insn = first;
last_insn = last;
}
/* Set the range of label numbers found in the current function.
This is used when belatedly compiling an inline function. */
void
set_new_first_and_last_label_num (first, last)
int first, last;
{
base_label_num = label_num;
first_label_num = first;
last_label_num = last;
}
/* Save all variables describing the current status into the structure *P.
This is used before starting a nested function. */
void
save_emit_status (p)
struct function *p;
{
p->reg_rtx_no = reg_rtx_no;
p->first_label_num = first_label_num;
p->first_insn = first_insn;
p->last_insn = last_insn;
p->sequence_stack = sequence_stack;
p->cur_insn_uid = cur_insn_uid;
p->last_linenum = last_linenum;
p->last_filename = last_filename;
p->regno_pointer_flag = regno_pointer_flag;
p->regno_pointer_flag_length = regno_pointer_flag_length;
p->regno_reg_rtx = regno_reg_rtx;
}
/* Restore all variables describing the current status from the structure *P.
This is used after a nested function. */
void
restore_emit_status (p)
struct function *p;
{
int i;
reg_rtx_no = p->reg_rtx_no;
first_label_num = p->first_label_num;
first_insn = p->first_insn;
last_insn = p->last_insn;
sequence_stack = p->sequence_stack;
cur_insn_uid = p->cur_insn_uid;
last_linenum = p->last_linenum;
last_filename = p->last_filename;
regno_pointer_flag = p->regno_pointer_flag;
regno_pointer_flag_length = p->regno_pointer_flag_length;
regno_reg_rtx = p->regno_reg_rtx;
/* Clear our cache of rtx expressions for start_sequence and gen_sequence. */
sequence_element_free_list = 0;
for (i = 0; i < SEQUENCE_RESULT_SIZE; i++)
sequence_result[i] = 0;
}
/* Go through all the RTL insn bodies and copy any invalid shared structure.
It does not work to do this twice, because the mark bits set here
are not cleared afterwards. */
void
unshare_all_rtl (insn)
register rtx insn;
{
for (; insn; insn = NEXT_INSN (insn))
if (GET_CODE (insn) == INSN || GET_CODE (insn) == JUMP_INSN
|| GET_CODE (insn) == CALL_INSN)
{
PATTERN (insn) = copy_rtx_if_shared (PATTERN (insn));
REG_NOTES (insn) = copy_rtx_if_shared (REG_NOTES (insn));
LOG_LINKS (insn) = copy_rtx_if_shared (LOG_LINKS (insn));
}
/* Make sure the addresses of stack slots found outside the insn chain
(such as, in DECL_RTL of a variable) are not shared
with the insn chain.
This special care is necessary when the stack slot MEM does not
actually appear in the insn chain. If it does appear, its address
is unshared from all else at that point. */
copy_rtx_if_shared (stack_slot_list);
}
/* Mark ORIG as in use, and return a copy of it if it was already in use.
Recursively does the same for subexpressions. */
rtx
copy_rtx_if_shared (orig)
rtx orig;
{
register rtx x = orig;
register int i;
register enum rtx_code code;
register char *format_ptr;
int copied = 0;
if (x == 0)
return 0;
code = GET_CODE (x);
/* These types may be freely shared. */
switch (code)
{
case REG:
case QUEUED:
case CONST_INT:
case CONST_DOUBLE:
case SYMBOL_REF:
case CODE_LABEL:
case PC:
case CC0:
case SCRATCH:
/* SCRATCH must be shared because they represent distinct values. */
return x;
case INSN:
case JUMP_INSN:
case CALL_INSN:
case NOTE:
case LABEL_REF:
case BARRIER:
/* The chain of insns is not being copied. */
return x;
case MEM:
/* A MEM is allowed to be shared if its address is constant
or is a constant plus one of the special registers. */
if (CONSTANT_ADDRESS_P (XEXP (x, 0))
|| XEXP (x, 0) == virtual_stack_vars_rtx
|| XEXP (x, 0) == virtual_incoming_args_rtx)
return x;
if (GET_CODE (XEXP (x, 0)) == PLUS
&& (XEXP (XEXP (x, 0), 0) == virtual_stack_vars_rtx
|| XEXP (XEXP (x, 0), 0) == virtual_incoming_args_rtx)
&& CONSTANT_ADDRESS_P (XEXP (XEXP (x, 0), 1)))
{
/* This MEM can appear in more than one place,
but its address better not be shared with anything else. */
if (! x->used)
XEXP (x, 0) = copy_rtx_if_shared (XEXP (x, 0));
x->used = 1;
return x;
}
}
/* This rtx may not be shared. If it has already been seen,
replace it with a copy of itself. */
if (x->used)
{
register rtx copy;
copy = rtx_alloc (code);
bcopy (x, copy, (sizeof (*copy) - sizeof (copy->fld)
+ sizeof (copy->fld[0]) * GET_RTX_LENGTH (code)));
x = copy;
copied = 1;
}
x->used = 1;
/* Now scan the subexpressions recursively.
We can store any replaced subexpressions directly into X
since we know X is not shared! Any vectors in X
must be copied if X was copied. */
format_ptr = GET_RTX_FORMAT (code);
for (i = 0; i < GET_RTX_LENGTH (code); i++)
{
switch (*format_ptr++)
{
case 'e':
XEXP (x, i) = copy_rtx_if_shared (XEXP (x, i));
break;
case 'E':
if (XVEC (x, i) != NULL)
{
register int j;
if (copied)
XVEC (x, i) = gen_rtvec_v (XVECLEN (x, i), &XVECEXP (x, i, 0));
for (j = 0; j < XVECLEN (x, i); j++)
XVECEXP (x, i, j)
= copy_rtx_if_shared (XVECEXP (x, i, j));
}
break;
}
}
return x;
}
/* Clear all the USED bits in X to allow copy_rtx_if_shared to be used
to look for shared sub-parts. */
void
reset_used_flags (x)
rtx x;
{
register int i, j;
register enum rtx_code code;
register char *format_ptr;
int copied = 0;
if (x == 0)
return;
code = GET_CODE (x);
/* These types may be freely shared so we needn't do any reseting
for them. */
switch (code)
{
case REG:
case QUEUED:
case CONST_INT:
case CONST_DOUBLE:
case SYMBOL_REF:
case CODE_LABEL:
case PC:
case CC0:
return;
case INSN:
case JUMP_INSN:
case CALL_INSN:
case NOTE:
case LABEL_REF:
case BARRIER:
/* The chain of insns is not being copied. */
return;
}
x->used = 0;
format_ptr = GET_RTX_FORMAT (code);
for (i = 0; i < GET_RTX_LENGTH (code); i++)
{
switch (*format_ptr++)
{
case 'e':
reset_used_flags (XEXP (x, i));
break;
case 'E':
for (j = 0; j < XVECLEN (x, i); j++)
reset_used_flags (XVECEXP (x, i, j));
break;
}
}
}
/* Copy X if necessary so that it won't be altered by changes in OTHER.
Return X or the rtx for the pseudo reg the value of X was copied into.
OTHER must be valid as a SET_DEST. */
rtx
make_safe_from (x, other)
rtx x, other;
{
while (1)
switch (GET_CODE (other))
{
case SUBREG:
other = SUBREG_REG (other);
break;
case STRICT_LOW_PART:
case SIGN_EXTEND:
case ZERO_EXTEND:
other = XEXP (other, 0);
break;
default:
goto done;
}
done:
if ((GET_CODE (other) == MEM
&& ! CONSTANT_P (x)
&& GET_CODE (x) != REG
&& GET_CODE (x) != SUBREG)
|| (GET_CODE (other) == REG
&& (REGNO (other) < FIRST_PSEUDO_REGISTER
|| reg_mentioned_p (other, x))))
{
rtx temp = gen_reg_rtx (GET_MODE (x));
emit_move_insn (temp, x);
return temp;
}
return x;
}
/* Emission of insns (adding them to the doubly-linked list). */
/* Return the first insn of the current sequence or current function. */
rtx
get_insns ()
{
return first_insn;
}
/* Return the last insn emitted in current sequence or current function. */
rtx
get_last_insn ()
{
return last_insn;
}
/* Specify a new insn as the last in the chain. */
void
set_last_insn (insn)
rtx insn;
{
if (NEXT_INSN (insn) != 0)
abort ();
last_insn = insn;
}
/* Return the last insn emitted, even if it is in a sequence now pushed. */
rtx
get_last_insn_anywhere ()
{
struct sequence_stack *stack;
if (last_insn)
return last_insn;
for (stack = sequence_stack; stack; stack = stack->next)
if (stack->last != 0)
return stack->last;
return 0;
}
/* Return a number larger than any instruction's uid in this function. */
int
get_max_uid ()
{
return cur_insn_uid;
}
/* Return the next insn. If it is a SEQUENCE, return the first insn
of the sequence. */
rtx
next_insn (insn)
rtx insn;
{
if (insn)
{
insn = NEXT_INSN (insn);
if (insn && GET_CODE (insn) == INSN
&& GET_CODE (PATTERN (insn)) == SEQUENCE)
insn = XVECEXP (PATTERN (insn), 0, 0);
}
return insn;
}
/* Return the previous insn. If it is a SEQUENCE, return the last insn
of the sequence. */
rtx
previous_insn (insn)
rtx insn;
{
if (insn)
{
insn = PREV_INSN (insn);
if (insn && GET_CODE (insn) == INSN
&& GET_CODE (PATTERN (insn)) == SEQUENCE)
insn = XVECEXP (PATTERN (insn), 0, XVECLEN (PATTERN (insn), 0) - 1);
}
return insn;
}
/* Return the next insn after INSN that is not a NOTE. This routine does not
look inside SEQUENCEs. */
rtx
next_nonnote_insn (insn)
rtx insn;
{
while (insn)
{
insn = NEXT_INSN (insn);
if (insn == 0 || GET_CODE (insn) != NOTE)
break;
}
return insn;
}
/* Return the previous insn before INSN that is not a NOTE. This routine does
not look inside SEQUENCEs. */
rtx
prev_nonnote_insn (insn)
rtx insn;
{
while (insn)
{
insn = PREV_INSN (insn);
if (insn == 0 || GET_CODE (insn) != NOTE)
break;
}
return insn;
}
/* Return the next INSN, CALL_INSN or JUMP_INSN after INSN;
or 0, if there is none. This routine does not look inside
SEQUENCEs. */
rtx
next_real_insn (insn)
rtx insn;
{
while (insn)
{
insn = NEXT_INSN (insn);
if (insn == 0 || GET_CODE (insn) == INSN
|| GET_CODE (insn) == CALL_INSN || GET_CODE (insn) == JUMP_INSN)
break;
}
return insn;
}
/* Return the last INSN, CALL_INSN or JUMP_INSN before INSN;
or 0, if there is none. This routine does not look inside
SEQUENCEs. */
rtx
prev_real_insn (insn)
rtx insn;
{
while (insn)
{
insn = PREV_INSN (insn);
if (insn == 0 || GET_CODE (insn) == INSN || GET_CODE (insn) == CALL_INSN
|| GET_CODE (insn) == JUMP_INSN)
break;
}
return insn;
}
/* Find the next insn after INSN that really does something. This routine
does not look inside SEQUENCEs. Until reload has completed, this is the
same as next_real_insn. */
rtx
next_active_insn (insn)
rtx insn;
{
while (insn)
{
insn = NEXT_INSN (insn);
if (insn == 0
|| GET_CODE (insn) == CALL_INSN || GET_CODE (insn) == JUMP_INSN
|| (GET_CODE (insn) == INSN
&& (! reload_completed
|| (GET_CODE (PATTERN (insn)) != USE
&& GET_CODE (PATTERN (insn)) != CLOBBER))))
break;
}
return insn;
}
/* Find the last insn before INSN that really does something. This routine
does not look inside SEQUENCEs. Until reload has completed, this is the
same as prev_real_insn. */
rtx
prev_active_insn (insn)
rtx insn;
{
while (insn)
{
insn = PREV_INSN (insn);
if (insn == 0
|| GET_CODE (insn) == CALL_INSN || GET_CODE (insn) == JUMP_INSN
|| (GET_CODE (insn) == INSN
&& (! reload_completed
|| (GET_CODE (PATTERN (insn)) != USE
&& GET_CODE (PATTERN (insn)) != CLOBBER))))
break;
}
return insn;
}
/* Return the next CODE_LABEL after the insn INSN, or 0 if there is none. */
rtx
next_label (insn)
rtx insn;
{
while (insn)
{
insn = NEXT_INSN (insn);
if (insn == 0 || GET_CODE (insn) == CODE_LABEL)
break;
}
return insn;
}
/* Return the last CODE_LABEL before the insn INSN, or 0 if there is none. */
rtx
prev_label (insn)
rtx insn;
{
while (insn)
{
insn = PREV_INSN (insn);
if (insn == 0 || GET_CODE (insn) == CODE_LABEL)
break;
}
return insn;
}
#ifdef HAVE_cc0
/* INSN uses CC0 and is being moved into a delay slot. Set up REG_CC_SETTER
and REG_CC_USER notes so we can find it. */
void
link_cc0_insns (insn)
rtx insn;
{
rtx user = next_nonnote_insn (insn);
if (GET_CODE (user) == INSN && GET_CODE (PATTERN (user)) == SEQUENCE)
user = XVECEXP (PATTERN (user), 0, 0);
REG_NOTES (user) = gen_rtx (INSN_LIST, REG_CC_SETTER, insn,
REG_NOTES (user));
REG_NOTES (insn) = gen_rtx (INSN_LIST, REG_CC_USER, user, REG_NOTES (insn));
}
/* Return the next insn that uses CC0 after INSN, which is assumed to
set it. This is the inverse of prev_cc0_setter (i.e., prev_cc0_setter
applied to the result of this function should yield INSN).
Normally, this is simply the next insn. However, if a REG_CC_USER note
is present, it contains the insn that uses CC0.
Return 0 if we can't find the insn. */
rtx
next_cc0_user (insn)
rtx insn;
{
rtx note = find_reg_note (insn, REG_CC_USER, NULL_RTX);
if (note)
return XEXP (note, 0);
insn = next_nonnote_insn (insn);
if (insn && GET_CODE (insn) == INSN && GET_CODE (PATTERN (insn)) == SEQUENCE)
insn = XVECEXP (PATTERN (insn), 0, 0);
if (insn && GET_RTX_CLASS (GET_CODE (insn)) == 'i'
&& reg_mentioned_p (cc0_rtx, PATTERN (insn)))
return insn;
return 0;
}
/* Find the insn that set CC0 for INSN. Unless INSN has a REG_CC_SETTER
note, it is the previous insn. */
rtx
prev_cc0_setter (insn)
rtx insn;
{
rtx note = find_reg_note (insn, REG_CC_SETTER, NULL_RTX);
rtx link;
if (note)
return XEXP (note, 0);
insn = prev_nonnote_insn (insn);
if (! sets_cc0_p (PATTERN (insn)))
abort ();
return insn;
}
#endif
/* Try splitting insns that can be split for better scheduling.
PAT is the pattern which might split.
TRIAL is the insn providing PAT.
BACKWARDS is non-zero if we are scanning insns from last to first.
If this routine succeeds in splitting, it returns the first or last
replacement insn depending on the value of BACKWARDS. Otherwise, it
returns TRIAL. If the insn to be returned can be split, it will be. */
rtx
try_split (pat, trial, backwards)
rtx pat, trial;
int backwards;
{
rtx before = PREV_INSN (trial);
rtx after = NEXT_INSN (trial);
rtx seq = split_insns (pat, trial);
int has_barrier = 0;
rtx tem;
/* If we are splitting a JUMP_INSN, it might be followed by a BARRIER.
We may need to handle this specially. */
if (after && GET_CODE (after) == BARRIER)
{
has_barrier = 1;
after = NEXT_INSN (after);
}
if (seq)
{
/* SEQ can either be a SEQUENCE or the pattern of a single insn.
The latter case will normally arise only when being done so that
it, in turn, will be split (SFmode on the 29k is an example). */
if (GET_CODE (seq) == SEQUENCE)
{
/* If we are splitting a JUMP_INSN, look for the JUMP_INSN in
SEQ and copy our JUMP_LABEL to it. If JUMP_LABEL is non-zero,
increment the usage count so we don't delete the label. */
int i;
if (GET_CODE (trial) == JUMP_INSN)
for (i = XVECLEN (seq, 0) - 1; i >= 0; i--)
if (GET_CODE (XVECEXP (seq, 0, i)) == JUMP_INSN)
{
JUMP_LABEL (XVECEXP (seq, 0, i)) = JUMP_LABEL (trial);
if (JUMP_LABEL (trial))
LABEL_NUSES (JUMP_LABEL (trial))++;
}
tem = emit_insn_after (seq, before);
delete_insn (trial);
if (has_barrier)
emit_barrier_after (tem);
}
/* Avoid infinite loop if the result matches the original pattern. */
else if (rtx_equal_p (seq, pat))
return trial;
else
{
PATTERN (trial) = seq;
INSN_CODE (trial) = -1;
}
/* Set TEM to the insn we should return. */
tem = backwards ? prev_active_insn (after) : next_active_insn (before);
return try_split (PATTERN (tem), tem, backwards);
}
return trial;
}
/* Make and return an INSN rtx, initializing all its slots.
Store PATTERN in the pattern slots. */
rtx
make_insn_raw (pattern)
rtx pattern;
{
register rtx insn;
insn = rtx_alloc(INSN);
INSN_UID(insn) = cur_insn_uid++;
PATTERN (insn) = pattern;
INSN_CODE (insn) = -1;
LOG_LINKS(insn) = NULL;
REG_NOTES(insn) = NULL;
return insn;
}
/* Like `make_insn' but make a JUMP_INSN instead of an insn. */
static rtx
make_jump_insn_raw (pattern)
rtx pattern;
{
register rtx insn;
insn = rtx_alloc (JUMP_INSN);
INSN_UID(insn) = cur_insn_uid++;
PATTERN (insn) = pattern;
INSN_CODE (insn) = -1;
LOG_LINKS(insn) = NULL;
REG_NOTES(insn) = NULL;
JUMP_LABEL(insn) = NULL;
return insn;
}
/* Add INSN to the end of the doubly-linked list.
INSN may be an INSN, JUMP_INSN, CALL_INSN, CODE_LABEL, BARRIER or NOTE. */
void
add_insn (insn)
register rtx insn;
{
PREV_INSN (insn) = last_insn;
NEXT_INSN (insn) = 0;
if (NULL != last_insn)
NEXT_INSN (last_insn) = insn;
if (NULL == first_insn)
first_insn = insn;
last_insn = insn;
}
/* Add INSN into the doubly-linked list after insn AFTER. This should be the
only function called to insert an insn once delay slots have been filled
since only it knows how to update a SEQUENCE. */
void
add_insn_after (insn, after)
rtx insn, after;
{
rtx next = NEXT_INSN (after);
NEXT_INSN (insn) = next;
PREV_INSN (insn) = after;
if (next)
{
PREV_INSN (next) = insn;
if (GET_CODE (next) == INSN && GET_CODE (PATTERN (next)) == SEQUENCE)
PREV_INSN (XVECEXP (PATTERN (next), 0, 0)) = insn;
}
else if (last_insn == after)
last_insn = insn;
else
{
struct sequence_stack *stack = sequence_stack;
/* Scan all pending sequences too. */
for (; stack; stack = stack->next)
if (after == stack->last)
stack->last = insn;
}
NEXT_INSN (after) = insn;
if (GET_CODE (after) == INSN && GET_CODE (PATTERN (after)) == SEQUENCE)
{
rtx sequence = PATTERN (after);
NEXT_INSN (XVECEXP (sequence, 0, XVECLEN (sequence, 0) - 1)) = insn;
}
}
/* Delete all insns made since FROM.
FROM becomes the new last instruction. */
void
delete_insns_since (from)
rtx from;
{
if (from == 0)
first_insn = 0;
else
NEXT_INSN (from) = 0;
last_insn = from;
}
/* Move a consecutive bunch of insns to a different place in the chain.
The insns to be moved are those between FROM and TO.
They are moved to a new position after the insn AFTER.
AFTER must not be FROM or TO or any insn in between.
This function does not know about SEQUENCEs and hence should not be
called after delay-slot filling has been done. */
void
reorder_insns (from, to, after)
rtx from, to, after;
{
/* Splice this bunch out of where it is now. */
if (PREV_INSN (from))
NEXT_INSN (PREV_INSN (from)) = NEXT_INSN (to);
if (NEXT_INSN (to))
PREV_INSN (NEXT_INSN (to)) = PREV_INSN (from);
if (last_insn == to)
last_insn = PREV_INSN (from);
if (first_insn == from)
first_insn = NEXT_INSN (to);
/* Make the new neighbors point to it and it to them. */
if (NEXT_INSN (after))
PREV_INSN (NEXT_INSN (after)) = to;
NEXT_INSN (to) = NEXT_INSN (after);
PREV_INSN (from) = after;
NEXT_INSN (after) = from;
if (after == last_insn)
last_insn = to;
}
/* Return the line note insn preceding INSN. */
static rtx
find_line_note (insn)
rtx insn;
{
if (no_line_numbers)
return 0;
for (; insn; insn = PREV_INSN (insn))
if (GET_CODE (insn) == NOTE
&& NOTE_LINE_NUMBER (insn) >= 0)
break;
return insn;
}
/* Like reorder_insns, but inserts line notes to preserve the line numbers
of the moved insns when debugging. This may insert a note between AFTER
and FROM, and another one after TO. */
void
reorder_insns_with_line_notes (from, to, after)
rtx from, to, after;
{
rtx from_line = find_line_note (from);
rtx after_line = find_line_note (after);
reorder_insns (from, to, after);
if (from_line == after_line)
return;
if (from_line)
emit_line_note_after (NOTE_SOURCE_FILE (from_line),
NOTE_LINE_NUMBER (from_line),
after);
if (after_line)
emit_line_note_after (NOTE_SOURCE_FILE (after_line),
NOTE_LINE_NUMBER (after_line),
to);
}
/* Emit an insn of given code and pattern
at a specified place within the doubly-linked list. */
/* Make an instruction with body PATTERN
and output it before the instruction BEFORE. */
rtx
emit_insn_before (pattern, before)
register rtx pattern, before;
{
register rtx insn = before;
if (GET_CODE (pattern) == SEQUENCE)
{
register int i;
for (i = 0; i < XVECLEN (pattern, 0); i++)
{
insn = XVECEXP (pattern, 0, i);
add_insn_after (insn, PREV_INSN (before));
}
if (XVECLEN (pattern, 0) < SEQUENCE_RESULT_SIZE)
sequence_result[XVECLEN (pattern, 0)] = pattern;
}
else
{
insn = make_insn_raw (pattern);
add_insn_after (insn, PREV_INSN (before));
}
return insn;
}
/* Make an instruction with body PATTERN and code JUMP_INSN
and output it before the instruction BEFORE. */
rtx
emit_jump_insn_before (pattern, before)
register rtx pattern, before;
{
register rtx insn;
if (GET_CODE (pattern) == SEQUENCE)
insn = emit_insn_before (pattern, before);
else
{
insn = make_jump_insn_raw (pattern, NULL_RTVEC);
add_insn_after (insn, PREV_INSN (before));
}
return insn;
}
/* Make an instruction with body PATTERN and code CALL_INSN
and output it before the instruction BEFORE. */
rtx
emit_call_insn_before (pattern, before)
register rtx pattern, before;
{
rtx insn = emit_insn_before (pattern, before);
PUT_CODE (insn, CALL_INSN);
return insn;
}
/* Make an insn of code BARRIER
and output it before the insn AFTER. */
rtx
emit_barrier_before (before)
register rtx before;
{
register rtx insn = rtx_alloc (BARRIER);
INSN_UID (insn) = cur_insn_uid++;
add_insn_after (insn, PREV_INSN (before));
return insn;
}
/* Emit a note of subtype SUBTYPE before the insn BEFORE. */
rtx
emit_note_before (subtype, before)
int subtype;
rtx before;
{
register rtx note = rtx_alloc (NOTE);
INSN_UID (note) = cur_insn_uid++;
NOTE_SOURCE_FILE (note) = 0;
NOTE_LINE_NUMBER (note) = subtype;
add_insn_after (note, PREV_INSN (before));
return note;
}
/* Make an insn of code INSN with body PATTERN
and output it after the insn AFTER. */
rtx
emit_insn_after (pattern, after)
register rtx pattern, after;
{
register rtx insn = after;
if (GET_CODE (pattern) == SEQUENCE)
{
register int i;
for (i = 0; i < XVECLEN (pattern, 0); i++)
{
insn = XVECEXP (pattern, 0, i);
add_insn_after (insn, after);
after = insn;
}
if (XVECLEN (pattern, 0) < SEQUENCE_RESULT_SIZE)
sequence_result[XVECLEN (pattern, 0)] = pattern;
}
else
{
insn = make_insn_raw (pattern);
add_insn_after (insn, after);
}
return insn;
}
/* Similar to emit_insn_after, except that line notes are to be inserted so
as to act as if this insn were at FROM. */
void
emit_insn_after_with_line_notes (pattern, after, from)
rtx pattern, after, from;
{
rtx from_line = find_line_note (from);
rtx after_line = find_line_note (after);
rtx insn = emit_insn_after (pattern, after);
if (from_line)
emit_line_note_after (NOTE_SOURCE_FILE (from_line),
NOTE_LINE_NUMBER (from_line),
after);
if (after_line)
emit_line_note_after (NOTE_SOURCE_FILE (after_line),
NOTE_LINE_NUMBER (after_line),
insn);
}
/* Make an insn of code JUMP_INSN with body PATTERN
and output it after the insn AFTER. */
rtx
emit_jump_insn_after (pattern, after)
register rtx pattern, after;
{
register rtx insn;
if (GET_CODE (pattern) == SEQUENCE)
insn = emit_insn_after (pattern, after);
else
{
insn = make_jump_insn_raw (pattern, NULL_RTVEC);
add_insn_after (insn, after);
}
return insn;
}
/* Make an insn of code BARRIER
and output it after the insn AFTER. */
rtx
emit_barrier_after (after)
register rtx after;
{
register rtx insn = rtx_alloc (BARRIER);
INSN_UID (insn) = cur_insn_uid++;
add_insn_after (insn, after);
return insn;
}
/* Emit the label LABEL after the insn AFTER. */
rtx
emit_label_after (label, after)
rtx label, after;
{
/* This can be called twice for the same label
as a result of the confusion that follows a syntax error!
So make it harmless. */
if (INSN_UID (label) == 0)
{
INSN_UID (label) = cur_insn_uid++;
add_insn_after (label, after);
}
return label;
}
/* Emit a note of subtype SUBTYPE after the insn AFTER. */
rtx
emit_note_after (subtype, after)
int subtype;
rtx after;
{
register rtx note = rtx_alloc (NOTE);
INSN_UID (note) = cur_insn_uid++;
NOTE_SOURCE_FILE (note) = 0;
NOTE_LINE_NUMBER (note) = subtype;
add_insn_after (note, after);
return note;
}
/* Emit a line note for FILE and LINE after the insn AFTER. */
rtx
emit_line_note_after (file, line, after)
char *file;
int line;
rtx after;
{
register rtx note;
if (no_line_numbers && line > 0)
{
cur_insn_uid++;
return 0;
}
note = rtx_alloc (NOTE);
INSN_UID (note) = cur_insn_uid++;
NOTE_SOURCE_FILE (note) = file;
NOTE_LINE_NUMBER (note) = line;
add_insn_after (note, after);
return note;
}
/* Make an insn of code INSN with pattern PATTERN
and add it to the end of the doubly-linked list.
If PATTERN is a SEQUENCE, take the elements of it
and emit an insn for each element.
Returns the last insn emitted. */
rtx
emit_insn (pattern)
rtx pattern;
{
rtx insn = last_insn;
if (GET_CODE (pattern) == SEQUENCE)
{
register int i;
for (i = 0; i < XVECLEN (pattern, 0); i++)
{
insn = XVECEXP (pattern, 0, i);
add_insn (insn);
}
if (XVECLEN (pattern, 0) < SEQUENCE_RESULT_SIZE)
sequence_result[XVECLEN (pattern, 0)] = pattern;
}
else
{
insn = make_insn_raw (pattern);
add_insn (insn);
}
return insn;
}
/* Emit the insns in a chain starting with INSN.
Return the last insn emitted. */
rtx
emit_insns (insn)
rtx insn;
{
rtx last = 0;
while (insn)
{
rtx next = NEXT_INSN (insn);
add_insn (insn);
last = insn;
insn = next;
}
return last;
}
/* Emit the insns in a chain starting with INSN and place them in front of
the insn BEFORE. Return the last insn emitted. */
rtx
emit_insns_before (insn, before)
rtx insn;
rtx before;
{
rtx last = 0;
while (insn)
{
rtx next = NEXT_INSN (insn);
add_insn_after (insn, PREV_INSN (before));
last = insn;
insn = next;
}
return last;
}
/* Emit the insns in a chain starting with FIRST and place them in back of
the insn AFTER. Return the last insn emitted. */
rtx
emit_insns_after (first, after)
register rtx first;
register rtx after;
{
register rtx last;
register rtx after_after;
if (!after)
abort ();
if (!first)
return first;
for (last = first; NEXT_INSN (last); last = NEXT_INSN (last))
continue;
after_after = NEXT_INSN (after);
NEXT_INSN (after) = first;
PREV_INSN (first) = after;
NEXT_INSN (last) = after_after;
if (after_after)
PREV_INSN (after_after) = last;
if (after == last_insn)
last_insn = last;
return last;
}
/* Make an insn of code JUMP_INSN with pattern PATTERN
and add it to the end of the doubly-linked list. */
rtx
emit_jump_insn (pattern)
rtx pattern;
{
if (GET_CODE (pattern) == SEQUENCE)
return emit_insn (pattern);
else
{
register rtx insn = make_jump_insn_raw (pattern, NULL_RTVEC);
add_insn (insn);
return insn;
}
}
/* Make an insn of code CALL_INSN with pattern PATTERN
and add it to the end of the doubly-linked list. */
rtx
emit_call_insn (pattern)
rtx pattern;
{
if (GET_CODE (pattern) == SEQUENCE)
return emit_insn (pattern);
else
{
register rtx insn = make_insn_raw (pattern);
add_insn (insn);
PUT_CODE (insn, CALL_INSN);
return insn;
}
}
/* Add the label LABEL to the end of the doubly-linked list. */
rtx
emit_label (label)
rtx label;
{
/* This can be called twice for the same label
as a result of the confusion that follows a syntax error!
So make it harmless. */
if (INSN_UID (label) == 0)
{
INSN_UID (label) = cur_insn_uid++;
add_insn (label);
}
return label;
}
/* Make an insn of code BARRIER
and add it to the end of the doubly-linked list. */
rtx
emit_barrier ()
{
register rtx barrier = rtx_alloc (BARRIER);
INSN_UID (barrier) = cur_insn_uid++;
add_insn (barrier);
return barrier;
}
/* Make an insn of code NOTE
with data-fields specified by FILE and LINE
and add it to the end of the doubly-linked list,
but only if line-numbers are desired for debugging info. */
rtx
emit_line_note (file, line)
char *file;
int line;
{
emit_filename = file;
emit_lineno = line;
#if 0
if (no_line_numbers)
return 0;
#endif
return emit_note (file, line);
}
/* Make an insn of code NOTE
with data-fields specified by FILE and LINE
and add it to the end of the doubly-linked list.
If it is a line-number NOTE, omit it if it matches the previous one. */
rtx
emit_note (file, line)
char *file;
int line;
{
register rtx note;
if (line > 0)
{
if (file && last_filename && !strcmp (file, last_filename)
&& line == last_linenum)
return 0;
last_filename = file;
last_linenum = line;
}
if (no_line_numbers && line > 0)
{
cur_insn_uid++;
return 0;
}
note = rtx_alloc (NOTE);
INSN_UID (note) = cur_insn_uid++;
NOTE_SOURCE_FILE (note) = file;
NOTE_LINE_NUMBER (note) = line;
add_insn (note);
return note;
}
/* Emit a NOTE, and don't omit it even if LINE it the previous note. */
rtx
emit_line_note_force (file, line)
char *file;
int line;
{
last_linenum = -1;
return emit_line_note (file, line);
}
/* Cause next statement to emit a line note even if the line number
has not changed. This is used at the beginning of a function. */
void
force_next_line_note ()
{
last_linenum = -1;
}
/* Return an indication of which type of insn should have X as a body.
The value is CODE_LABEL, INSN, CALL_INSN or JUMP_INSN. */
enum rtx_code
classify_insn (x)
rtx x;
{
if (GET_CODE (x) == CODE_LABEL)
return CODE_LABEL;
if (GET_CODE (x) == CALL)
return CALL_INSN;
if (GET_CODE (x) == RETURN)
return JUMP_INSN;
if (GET_CODE (x) == SET)
{
if (SET_DEST (x) == pc_rtx)
return JUMP_INSN;
else if (GET_CODE (SET_SRC (x)) == CALL)
return CALL_INSN;
else
return INSN;
}
if (GET_CODE (x) == PARALLEL)
{
register int j;
for (j = XVECLEN (x, 0) - 1; j >= 0; j--)
if (GET_CODE (XVECEXP (x, 0, j)) == CALL)
return CALL_INSN;
else if (GET_CODE (XVECEXP (x, 0, j)) == SET
&& SET_DEST (XVECEXP (x, 0, j)) == pc_rtx)
return JUMP_INSN;
else if (GET_CODE (XVECEXP (x, 0, j)) == SET
&& GET_CODE (SET_SRC (XVECEXP (x, 0, j))) == CALL)
return CALL_INSN;
}
return INSN;
}
/* Emit the rtl pattern X as an appropriate kind of insn.
If X is a label, it is simply added into the insn chain. */
rtx
emit (x)
rtx x;
{
enum rtx_code code = classify_insn (x);
if (code == CODE_LABEL)
return emit_label (x);
else if (code == INSN)
return emit_insn (x);
else if (code == JUMP_INSN)
{
register rtx insn = emit_jump_insn (x);
if (simplejump_p (insn) || GET_CODE (x) == RETURN)
return emit_barrier ();
return insn;
}
else if (code == CALL_INSN)
return emit_call_insn (x);
else
abort ();
}
/* Begin emitting insns to a sequence which can be packaged in an RTL_EXPR. */
void
start_sequence ()
{
struct sequence_stack *tem;
if (sequence_element_free_list)
{
/* Reuse a previously-saved struct sequence_stack. */
tem = sequence_element_free_list;
sequence_element_free_list = tem->next;
}
else
tem = (struct sequence_stack *) permalloc (sizeof (struct sequence_stack));
tem->next = sequence_stack;
tem->first = first_insn;
tem->last = last_insn;
sequence_stack = tem;
first_insn = 0;
last_insn = 0;
}
/* Set up the insn chain starting with FIRST
as the current sequence, saving the previously current one. */
void
push_to_sequence (first)
rtx first;
{
rtx last;
start_sequence ();
for (last = first; last && NEXT_INSN (last); last = NEXT_INSN (last));
first_insn = first;
last_insn = last;
}
/* After emitting to a sequence, restore previous saved state.
To get the contents of the sequence just made,
you must call `gen_sequence' *before* calling here. */
void
end_sequence ()
{
struct sequence_stack *tem = sequence_stack;
first_insn = tem->first;
last_insn = tem->last;
sequence_stack = tem->next;
tem->next = sequence_element_free_list;
sequence_element_free_list = tem;
}
/* Return 1 if currently emitting into a sequence. */
int
in_sequence_p ()
{
return sequence_stack != 0;
}
/* Generate a SEQUENCE rtx containing the insns already emitted
to the current sequence.
This is how the gen_... function from a DEFINE_EXPAND
constructs the SEQUENCE that it returns. */
rtx
gen_sequence ()
{
rtx result;
rtx tem;
rtvec newvec;
int i;
int len;
/* Count the insns in the chain. */
len = 0;
for (tem = first_insn; tem; tem = NEXT_INSN (tem))
len++;
/* If only one insn, return its pattern rather than a SEQUENCE.
(Now that we cache SEQUENCE expressions, it isn't worth special-casing
the case of an empty list.) */
if (len == 1
&& (GET_CODE (first_insn) == INSN
|| GET_CODE (first_insn) == JUMP_INSN
|| GET_CODE (first_insn) == CALL_INSN))
return PATTERN (first_insn);
/* Put them in a vector. See if we already have a SEQUENCE of the
appropriate length around. */
if (len < SEQUENCE_RESULT_SIZE && (result = sequence_result[len]) != 0)
sequence_result[len] = 0;
else
{
/* Ensure that this rtl goes in saveable_obstack, since we may be
caching it. */
int in_current_obstack = rtl_in_saveable_obstack ();
result = gen_rtx (SEQUENCE, VOIDmode, rtvec_alloc (len));
if (in_current_obstack)
rtl_in_current_obstack ();
}
for (i = 0, tem = first_insn; tem; tem = NEXT_INSN (tem), i++)
XVECEXP (result, 0, i) = tem;
return result;
}
/* Set up regno_reg_rtx, reg_rtx_no and regno_pointer_flag
according to the chain of insns starting with FIRST.
Also set cur_insn_uid to exceed the largest uid in that chain.
This is used when an inline function's rtl is saved
and passed to rest_of_compilation later. */
static void restore_reg_data_1 ();
void
restore_reg_data (first)
rtx first;
{
register rtx insn;
int i;
register int max_uid = 0;
for (insn = first; insn; insn = NEXT_INSN (insn))
{
if (INSN_UID (insn) >= max_uid)
max_uid = INSN_UID (insn);
switch (GET_CODE (insn))
{
case NOTE:
case CODE_LABEL:
case BARRIER:
break;
case JUMP_INSN:
case CALL_INSN:
case INSN:
restore_reg_data_1 (PATTERN (insn));
break;
}
}
/* Don't duplicate the uids already in use. */
cur_insn_uid = max_uid + 1;
/* If any regs are missing, make them up.
??? word_mode is not necessarily the right mode. Most likely these REGs
are never used. At some point this should be checked. */
for (i = FIRST_PSEUDO_REGISTER; i < reg_rtx_no; i++)
if (regno_reg_rtx[i] == 0)
regno_reg_rtx[i] = gen_rtx (REG, word_mode, i);
}
static void
restore_reg_data_1 (orig)
rtx orig;
{
register rtx x = orig;
register int i;
register enum rtx_code code;
register char *format_ptr;
code = GET_CODE (x);
switch (code)
{
case QUEUED:
case CONST_INT:
case CONST_DOUBLE:
case SYMBOL_REF:
case CODE_LABEL:
case PC:
case CC0:
case LABEL_REF:
return;
case REG:
if (REGNO (x) >= FIRST_PSEUDO_REGISTER)
{
/* Make sure regno_pointer_flag and regno_reg_rtx are large
enough to have an element for this pseudo reg number. */
if (REGNO (x) >= reg_rtx_no)
{
reg_rtx_no = REGNO (x);
if (reg_rtx_no >= regno_pointer_flag_length)
{
int newlen = MAX (regno_pointer_flag_length * 2,
reg_rtx_no + 30);
rtx *new1;
char *new = (char *) oballoc (newlen);
bzero (new, newlen);
bcopy (regno_pointer_flag, new, regno_pointer_flag_length);
new1 = (rtx *) oballoc (newlen * sizeof (rtx));
bzero (new1, newlen * sizeof (rtx));
bcopy (regno_reg_rtx, new1, regno_pointer_flag_length * sizeof (rtx));
regno_pointer_flag = new;
regno_reg_rtx = new1;
regno_pointer_flag_length = newlen;
}
reg_rtx_no ++;
}
regno_reg_rtx[REGNO (x)] = x;
}
return;
case MEM:
if (GET_CODE (XEXP (x, 0)) == REG)
mark_reg_pointer (XEXP (x, 0));
restore_reg_data_1 (XEXP (x, 0));
return;
}
/* Now scan the subexpressions recursively. */
format_ptr = GET_RTX_FORMAT (code);
for (i = 0; i < GET_RTX_LENGTH (code); i++)
{
switch (*format_ptr++)
{
case 'e':
restore_reg_data_1 (XEXP (x, i));
break;
case 'E':
if (XVEC (x, i) != NULL)
{
register int j;
for (j = 0; j < XVECLEN (x, i); j++)
restore_reg_data_1 (XVECEXP (x, i, j));
}
break;
}
}
}
/* Initialize data structures and variables in this file
before generating rtl for each function. */
void
init_emit ()
{
int i;
first_insn = NULL;
last_insn = NULL;
cur_insn_uid = 1;
reg_rtx_no = LAST_VIRTUAL_REGISTER + 1;
last_linenum = 0;
last_filename = 0;
first_label_num = label_num;
last_label_num = 0;
/* Clear the start_sequence/gen_sequence cache. */
sequence_element_free_list = 0;
for (i = 0; i < SEQUENCE_RESULT_SIZE; i++)
sequence_result[i] = 0;
/* Init the tables that describe all the pseudo regs. */
regno_pointer_flag_length = LAST_VIRTUAL_REGISTER + 101;
regno_pointer_flag
= (char *) oballoc (regno_pointer_flag_length);
bzero (regno_pointer_flag, regno_pointer_flag_length);
regno_reg_rtx
= (rtx *) oballoc (regno_pointer_flag_length * sizeof (rtx));
bzero (regno_reg_rtx, regno_pointer_flag_length * sizeof (rtx));
/* Put copies of all the virtual register rtx into regno_reg_rtx. */
regno_reg_rtx[VIRTUAL_INCOMING_ARGS_REGNUM] = virtual_incoming_args_rtx;
regno_reg_rtx[VIRTUAL_STACK_VARS_REGNUM] = virtual_stack_vars_rtx;
regno_reg_rtx[VIRTUAL_STACK_DYNAMIC_REGNUM] = virtual_stack_dynamic_rtx;
regno_reg_rtx[VIRTUAL_OUTGOING_ARGS_REGNUM] = virtual_outgoing_args_rtx;
/* Indicate that the virtual registers and stack locations are
all pointers. */
REGNO_POINTER_FLAG (STACK_POINTER_REGNUM) = 1;
REGNO_POINTER_FLAG (FRAME_POINTER_REGNUM) = 1;
REGNO_POINTER_FLAG (ARG_POINTER_REGNUM) = 1;
REGNO_POINTER_FLAG (VIRTUAL_INCOMING_ARGS_REGNUM) = 1;
REGNO_POINTER_FLAG (VIRTUAL_STACK_VARS_REGNUM) = 1;
REGNO_POINTER_FLAG (VIRTUAL_STACK_DYNAMIC_REGNUM) = 1;
REGNO_POINTER_FLAG (VIRTUAL_OUTGOING_ARGS_REGNUM) = 1;
}
/* Create some permanent unique rtl objects shared between all functions.
LINE_NUMBERS is nonzero if line numbers are to be generated. */
void
init_emit_once (line_numbers)
int line_numbers;
{
int i;
enum machine_mode mode;
no_line_numbers = ! line_numbers;
sequence_stack = NULL;
/* Create the unique rtx's for certain rtx codes and operand values. */
pc_rtx = gen_rtx (PC, VOIDmode);
cc0_rtx = gen_rtx (CC0, VOIDmode);
/* Don't use gen_rtx here since gen_rtx in this case
tries to use these variables. */
for (i = - MAX_SAVED_CONST_INT; i <= MAX_SAVED_CONST_INT; i++)
{
const_int_rtx[i + MAX_SAVED_CONST_INT] = rtx_alloc (CONST_INT);
PUT_MODE (const_int_rtx[i + MAX_SAVED_CONST_INT], VOIDmode);
INTVAL (const_int_rtx[i + MAX_SAVED_CONST_INT]) = i;
}
/* These four calls obtain some of the rtx expressions made above. */
const0_rtx = GEN_INT (0);
const1_rtx = GEN_INT (1);
const2_rtx = GEN_INT (2);
constm1_rtx = GEN_INT (-1);
/* This will usually be one of the above constants, but may be a new rtx. */
const_true_rtx = GEN_INT (STORE_FLAG_VALUE);
dconst0 = REAL_VALUE_ATOF ("0");
dconst1 = REAL_VALUE_ATOF ("1");
dconst2 = REAL_VALUE_ATOF ("2");
dconstm1 = REAL_VALUE_ATOF ("-1");
for (i = 0; i <= 2; i++)
{
for (mode = GET_CLASS_NARROWEST_MODE (MODE_FLOAT); mode != VOIDmode;
mode = GET_MODE_WIDER_MODE (mode))
{
rtx tem = rtx_alloc (CONST_DOUBLE);
union real_extract u;
bzero (&u, sizeof u); /* Zero any holes in a structure. */
u.d = i == 0 ? dconst0 : i == 1 ? dconst1 : dconst2;
bcopy (&u, &CONST_DOUBLE_LOW (tem), sizeof u);
CONST_DOUBLE_MEM (tem) = cc0_rtx;
PUT_MODE (tem, mode);
const_tiny_rtx[i][(int) mode] = tem;
}
const_tiny_rtx[i][(int) VOIDmode] = GEN_INT (i);
for (mode = GET_CLASS_NARROWEST_MODE (MODE_INT); mode != VOIDmode;
mode = GET_MODE_WIDER_MODE (mode))
const_tiny_rtx[i][(int) mode] = GEN_INT (i);
}
for (mode = GET_CLASS_NARROWEST_MODE (MODE_CC); mode != VOIDmode;
mode = GET_MODE_WIDER_MODE (mode))
const_tiny_rtx[0][(int) mode] = const0_rtx;
stack_pointer_rtx = gen_rtx (REG, Pmode, STACK_POINTER_REGNUM);
frame_pointer_rtx = gen_rtx (REG, Pmode, FRAME_POINTER_REGNUM);
if (FRAME_POINTER_REGNUM == ARG_POINTER_REGNUM)
arg_pointer_rtx = frame_pointer_rtx;
else if (STACK_POINTER_REGNUM == ARG_POINTER_REGNUM)
arg_pointer_rtx = stack_pointer_rtx;
else
arg_pointer_rtx = gen_rtx (REG, Pmode, ARG_POINTER_REGNUM);
/* Create the virtual registers. Do so here since the following objects
might reference them. */
virtual_incoming_args_rtx = gen_rtx (REG, Pmode,
VIRTUAL_INCOMING_ARGS_REGNUM);
virtual_stack_vars_rtx = gen_rtx (REG, Pmode,
VIRTUAL_STACK_VARS_REGNUM);
virtual_stack_dynamic_rtx = gen_rtx (REG, Pmode,
VIRTUAL_STACK_DYNAMIC_REGNUM);
virtual_outgoing_args_rtx = gen_rtx (REG, Pmode,
VIRTUAL_OUTGOING_ARGS_REGNUM);
#ifdef STRUCT_VALUE
struct_value_rtx = STRUCT_VALUE;
#else
struct_value_rtx = gen_rtx (REG, Pmode, STRUCT_VALUE_REGNUM);
#endif
#ifdef STRUCT_VALUE_INCOMING
struct_value_incoming_rtx = STRUCT_VALUE_INCOMING;
#else
#ifdef STRUCT_VALUE_INCOMING_REGNUM
struct_value_incoming_rtx
= gen_rtx (REG, Pmode, STRUCT_VALUE_INCOMING_REGNUM);
#else
struct_value_incoming_rtx = struct_value_rtx;
#endif
#endif
#ifdef STATIC_CHAIN_REGNUM
static_chain_rtx = gen_rtx (REG, Pmode, STATIC_CHAIN_REGNUM);
#ifdef STATIC_CHAIN_INCOMING_REGNUM
if (STATIC_CHAIN_INCOMING_REGNUM != STATIC_CHAIN_REGNUM)
static_chain_incoming_rtx = gen_rtx (REG, Pmode, STATIC_CHAIN_INCOMING_REGNUM);
else
#endif
static_chain_incoming_rtx = static_chain_rtx;
#endif
#ifdef STATIC_CHAIN
static_chain_rtx = STATIC_CHAIN;
#ifdef STATIC_CHAIN_INCOMING
static_chain_incoming_rtx = STATIC_CHAIN_INCOMING;
#else
static_chain_incoming_rtx = static_chain_rtx;
#endif
#endif
#ifdef PIC_OFFSET_TABLE_REGNUM
pic_offset_table_rtx = gen_rtx (REG, Pmode, PIC_OFFSET_TABLE_REGNUM);
#endif
}