4.4BSD/usr/src/kerberosIV/krb/rd_priv.c

Compare this file to the similar file:
Show the results in this format:

/*
 * $Source: /mit/kerberos/src/lib/krb/RCS/rd_priv.c,v $
 * $Author: jtkohl $
 *
 * Copyright 1986, 1987, 1988 by the Massachusetts Institute
 * of Technology.
 *
 * For copying and distribution information, please see the file
 * <mit-copyright.h>.
 *
 * This routine dissects a a Kerberos 'private msg', decrypting it,
 * checking its integrity, and returning a pointer to the application
 * data contained and its length.
 *
 * Returns 0 (RD_AP_OK) for success or an error code (RD_AP_...).  If
 * the return value is RD_AP_TIME, then either the times are too far
 * out of synch, OR the packet was modified.
 *
 * Steve Miller    Project Athena  MIT/DEC
 */

#ifndef lint
static char *rcsid_rd_priv_c=
"$Header: rd_priv.c,v 4.14 89/04/28 11:59:42 jtkohl Exp $";
#endif /* lint */

#include <mit-copyright.h>

/* system include files */
#include <stdio.h>
#include <errno.h>
#include <sys/types.h>
#include <netinet/in.h>
#include <sys/time.h>

/* application include files */
#include <des.h>
#include <krb.h>
#include <prot.h>
#include "lsb_addr_comp.h"

extern char *errmsg();
extern int errno;
extern int krb_debug;

/* static storage */

static u_long c_length;
static int swap_bytes;
static struct timeval local_time;
static long delta_t;
int private_msg_ver = KRB_PROT_VERSION;

/*
#ifdef NOENCRPYTION
 * krb_rd_priv() checks the integrity of an
#else
 * krb_rd_priv() decrypts and checks the integrity of an
#endif
 * AUTH_MSG_PRIVATE message.  Given the message received, "in",
 * the length of that message, "in_length", the key "schedule"
#ifdef NOENCRYPTION
 * and "key", and the network addresses of the
#else
 * and "key" to decrypt with, and the network addresses of the
#endif
 * "sender" and "receiver" of the message, krb_rd_safe() returns
 * RD_AP_OK if the message is okay, otherwise some error code.
 *
 * The message data retrieved from "in" are returned in the structure
#ifdef NOENCRYPTION
 * "m_data".  The pointer to the application data
#else
 * "m_data".  The pointer to the decrypted application data
#endif
 * (m_data->app_data) refers back to the appropriate place in "in".
 *
 * See the file "mk_priv.c" for the format of the AUTH_MSG_PRIVATE
 * message.  The structure containing the extracted message
 * information, MSG_DAT, is defined in "krb.h".
 */

long krb_rd_priv(in,in_length,schedule,key,sender,receiver,m_data)
    u_char *in;			/* pointer to the msg received */
    u_long in_length;		/* length of "in" msg */
    Key_schedule schedule;	/* precomputed key schedule */
    C_Block key;		/* encryption key for seed and ivec */
    struct sockaddr_in *sender;
    struct sockaddr_in *receiver;
    MSG_DAT *m_data;		/*various input/output data from msg */
{
    register u_char *p,*q;
    static u_long src_addr;	/* Can't send structs since no
				 * guarantees on size */

    if (gettimeofday(&local_time,(struct timezone *)0))
        return  -1;

    p = in;			/* beginning of message */
    swap_bytes = 0;

    if (*p++ != KRB_PROT_VERSION && *(p-1) != 3)
        return RD_AP_VERSION;
    private_msg_ver = *(p-1);
    if (((*p) & ~1) != AUTH_MSG_PRIVATE)
        return RD_AP_MSG_TYPE;
    if ((*p++ & 1) != HOST_BYTE_ORDER)
        swap_bytes++;

    /* get cipher length */
    bcopy((char *)p,(char *)&c_length,sizeof(c_length));
    if (swap_bytes)
        swap_u_long(c_length);
    p += sizeof(c_length);
    /* check for rational length so we don't go comatose */
    if (VERSION_SZ + MSG_TYPE_SZ + c_length > in_length)
        return RD_AP_MODIFIED;

#ifndef NOENCRYPTION
    /*
     * decrypt to obtain length, timestamps, app_data, and checksum
     * use the session key as an ivec
     */
#endif

    q = p;			/* mark start of encrypted stuff */

#ifndef NOENCRYPTION
    /* pcbc decrypt, use key as ivec */
    pcbc_encrypt((C_Block *) q,(C_Block *) q, (long) c_length,
                 schedule,key,DECRYPT);
#endif

    /* safely get application data length */
    bcopy((char *) p,(char *)&(m_data->app_length),
          sizeof(m_data->app_length));
    if (swap_bytes)
        swap_u_long(m_data->app_length);
    p += sizeof(m_data->app_length);    /* skip over */

    if (m_data->app_length + sizeof(c_length) + sizeof(in_length) +
        sizeof(m_data->time_sec) + sizeof(m_data->time_5ms) +
        sizeof(src_addr) + VERSION_SZ + MSG_TYPE_SZ
        > in_length)
        return RD_AP_MODIFIED;

#ifndef NOENCRYPTION
    /* we're now at the decrypted application data */
#endif
    m_data->app_data = p;

    p += m_data->app_length;

    /* safely get time_5ms */
    bcopy((char *) p, (char *)&(m_data->time_5ms),
	  sizeof(m_data->time_5ms));
    /*  don't need to swap-- one byte for now */
    p += sizeof(m_data->time_5ms);

    /* safely get src address */
    bcopy((char *) p,(char *)&src_addr,sizeof(src_addr));
    /* don't swap, net order always */
    p += sizeof(src_addr);

    if (src_addr != (u_long) sender->sin_addr.s_addr)
	return RD_AP_MODIFIED;

    /* safely get time_sec */
    bcopy((char *) p, (char *)&(m_data->time_sec),
	  sizeof(m_data->time_sec));
    if (swap_bytes) swap_u_long(m_data->time_sec);

    p += sizeof(m_data->time_sec);

    /* check direction bit is the sign bit */
    /* For compatibility with broken old code, compares are done in VAX 
       byte order (LSBFIRST) */ 
    if (lsb_net_ulong_less(sender->sin_addr.s_addr,
			   receiver->sin_addr.s_addr)==-1) 
	/* src < recv */ 
	m_data->time_sec =  - m_data->time_sec; 
    else if (lsb_net_ulong_less(sender->sin_addr.s_addr, 
				receiver->sin_addr.s_addr)==0) 
	if (lsb_net_ushort_less(sender->sin_port,receiver->sin_port)==-1)
	    /* src < recv */
	    m_data->time_sec =  - m_data->time_sec; 
    /*
     * all that for one tiny bit!
     * Heaven help those that talk to themselves.
     */

    /* check the time integrity of the msg */
    delta_t = abs((int)((long) local_time.tv_sec
			- m_data->time_sec));
    if (delta_t > CLOCK_SKEW)
	return RD_AP_TIME;
    if (krb_debug)
	printf("\ndelta_t = %d",delta_t);

    /*
     * caller must check timestamps for proper order and
     * replays, since server might have multiple clients
     * each with its own timestamps and we don't assume
     * tightly synchronized clocks.
     */

#ifdef notdef
    bcopy((char *) p,(char *)&cksum,sizeof(cksum));
    if (swap_bytes) swap_u_long(cksum)
    /*
     * calculate the checksum of the length, sequence,
     * and input data, on the sending byte order!!
     */
    calc_cksum = quad_cksum(q,NULL,p-q,0,key);

    if (krb_debug)
	printf("\ncalc_cksum = %u, received cksum = %u",
	       calc_cksum, cksum);
    if (cksum != calc_cksum)
	return RD_AP_MODIFIED;
#endif
    return RD_AP_OK;        /* OK == 0 */
}