4.4BSD/usr/src/sys/luna68k/luna68k/trap.c
/*
* Copyright (c) 1988 University of Utah.
* Copyright (c) 1992 OMRON Corporation.
* Copyright (c) 1982, 1986, 1990, 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* the Systems Programming Group of the University of Utah Computer
* Science Department.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: Utah $Hdr: trap.c 1.35 91/12/26$
* from: hp300/hp300/trap.c 7.26 (Berkeley) 12/27/92
*
* @(#)trap.c 8.1 (Berkeley) 6/16/93
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/proc.h>
#include <sys/acct.h>
#include <sys/kernel.h>
#include <sys/signalvar.h>
#include <sys/resourcevar.h>
#include <sys/syscall.h>
#include <sys/syslog.h>
#include <sys/user.h>
#ifdef KTRACE
#include <sys/ktrace.h>
#endif
#include <machine/psl.h>
#include <machine/trap.h>
#include <machine/cpu.h>
#include <machine/reg.h>
#include <machine/mtpr.h>
#include <vm/vm.h>
#include <vm/pmap.h>
struct sysent sysent[];
int nsysent;
char *trap_type[] = {
"Bus error",
"Address error",
"Illegal instruction",
"Zero divide",
"CHK instruction",
"TRAPV instruction",
"Privilege violation",
"Trace trap",
"MMU fault",
"SSIR trap",
"Format error",
"68881 exception",
"Coprocessor violation",
"Async system trap"
};
#define TRAP_TYPES (sizeof trap_type / sizeof trap_type[0])
/*
* Size of various exception stack frames (minus the standard 8 bytes)
*/
short exframesize[] = {
FMT0SIZE, /* type 0 - normal (68020/030/040) */
FMT1SIZE, /* type 1 - throwaway (68020/030/040) */
FMT2SIZE, /* type 2 - normal 6-word (68020/030/040) */
FMT3SIZE, /* type 3 - FP post-instruction (68040) */
-1, -1, -1, /* type 4-6 - undefined */
FMT7SIZE, /* type 7 - access error (68040) */
58, /* type 8 - bus fault (68010) */
FMT9SIZE, /* type 9 - coprocessor mid-instruction (68020/030) */
FMTASIZE, /* type A - short bus fault (68020/030) */
FMTBSIZE, /* type B - long bus fault (68020/030) */
-1, -1, -1, -1 /* type C-F - undefined */
};
#ifdef LUNA2
#define KDFAULT(c) (mmutype == MMU_68040 ? \
((c) & SSW4_TMMASK) == SSW4_TMKD : \
((c) & (SSW_DF|FC_SUPERD)) == (SSW_DF|FC_SUPERD))
#define WRFAULT(c) (mmutype == MMU_68040 ? \
((c) & SSW4_RW) == 0 : \
((c) & (SSW_DF|SSW_RW)) == SSW_DF)
#else
#define KDFAULT(c) (((c) & (SSW_DF|SSW_FCMASK)) == (SSW_DF|FC_SUPERD))
#define WRFAULT(c) (((c) & (SSW_DF|SSW_RW)) == SSW_DF)
#endif
#ifdef DEBUG
int mmudebug = 0;
int mmupid = -1;
#define MDB_FOLLOW 1
#define MDB_WBFOLLOW 2
#define MDB_WBFAILED 4
#define MDB_ISPID(p) (p) == mmupid
#endif
/*
* trap and syscall both need the following work done before returning
* to user mode.
*/
static inline void
userret(p, fp, oticks, faultaddr, fromtrap)
register struct proc *p;
register struct frame *fp;
u_quad_t oticks;
u_int faultaddr;
int fromtrap;
{
int sig, s;
#ifdef LUNA2
int beenhere = 0;
again:
#endif
/* take pending signals */
while ((sig = CURSIG(p)) != 0)
psig(sig);
p->p_pri = p->p_usrpri;
if (want_resched) {
/*
* Since we are curproc, clock will normally just change
* our priority without moving us from one queue to another
* (since the running process is not on a queue.)
* If that happened after we setrq ourselves but before we
* swtch()'ed, we might not be on the queue indicated by
* our priority.
*/
s = splstatclock();
setrq(p);
p->p_stats->p_ru.ru_nivcsw++;
swtch();
splx(s);
while ((sig = CURSIG(p)) != 0)
psig(sig);
}
/*
* If profiling, charge system time to the trapped pc.
*/
if (p->p_flag & SPROFIL) {
extern int psratio;
addupc_task(p, fp->f_pc,
(int)(p->p_sticks - oticks) * psratio);
}
#ifdef LUNA2
/*
* Deal with user mode writebacks (from trap, or from sigreturn).
* If any writeback fails, go back and attempt signal delivery.
* unless we have already been here and attempted the writeback
* (e.g. bad address with user ignoring SIGSEGV). In that case
* we just return to the user without sucessfully completing
* the writebacks. Maybe we should just drop the sucker?
*/
if (mmutype == MMU_68040 && fp->f_format == FMT7) {
if (beenhere) {
#ifdef DEBUG
if (mmudebug & MDB_WBFAILED)
printf(fromtrap ?
"pid %d(%s): writeback aborted, pc=%x, fa=%x\n" :
"pid %d(%s): writeback aborted in sigreturn, pc=%x\n",
p->p_pid, p->p_comm, fp->f_pc, faultaddr);
#endif
} else if (sig = writeback(fp, fromtrap)) {
beenhere = 1;
oticks = p->p_sticks;
trapsignal(p, sig, faultaddr);
goto again;
}
}
#endif
curpri = p->p_pri;
}
/*
* Trap is called from locore to handle most types of processor traps,
* including events such as simulated software interrupts/AST's.
* System calls are broken out for efficiency.
*/
/*ARGSUSED*/
trap(type, code, v, frame)
int type;
unsigned code;
register unsigned v;
struct frame frame;
{
register int i;
unsigned ucode;
register struct proc *p;
u_quad_t sticks;
unsigned ncode;
extern char fswintr[];
cnt.v_trap++;
p = curproc;
ucode = 0;
if (USERMODE(frame.f_sr)) {
type |= T_USER;
sticks = p->p_sticks;
p->p_md.md_regs = frame.f_regs;
}
switch (type) {
default:
dopanic:
printf("trap type %d, code = %x, v = %x\n", type, code, v);
regdump(&frame, 128);
type &= ~T_USER;
if ((unsigned)type < TRAP_TYPES)
panic(trap_type[type]);
panic("trap");
case T_BUSERR: /* kernel bus error */
if (!p->p_addr->u_pcb.pcb_onfault)
goto dopanic;
/*
* If we have arranged to catch this fault in any of the
* copy to/from user space routines, set PC to return to
* indicated location and set flag informing buserror code
* that it may need to clean up stack frame.
*/
copyfault:
frame.f_stackadj = exframesize[frame.f_format];
frame.f_format = frame.f_vector = 0;
frame.f_pc = (int) p->p_addr->u_pcb.pcb_onfault;
return;
case T_BUSERR|T_USER: /* bus error */
case T_ADDRERR|T_USER: /* address error */
ucode = v;
i = SIGBUS;
break;
#ifdef FPCOPROC
case T_COPERR: /* kernel coprocessor violation */
#endif
case T_FMTERR|T_USER: /* do all RTE errors come in as T_USER? */
case T_FMTERR: /* ...just in case... */
/*
* The user has most likely trashed the RTE or FP state info
* in the stack frame of a signal handler.
*/
type |= T_USER;
printf("pid %d: kernel %s exception\n", p->p_pid,
type==T_COPERR ? "coprocessor" : "format");
p->p_sigacts->ps_sigact[SIGILL] = SIG_DFL;
i = sigmask(SIGILL);
p->p_sigignore &= ~i;
p->p_sigcatch &= ~i;
p->p_sigmask &= ~i;
i = SIGILL;
ucode = frame.f_format; /* XXX was ILL_RESAD_FAULT */
break;
#ifdef FPCOPROC
case T_COPERR|T_USER: /* user coprocessor violation */
/* What is a proper response here? */
ucode = 0;
i = SIGFPE;
break;
case T_FPERR|T_USER: /* 68881 exceptions */
/*
* We pass along the 68881 status register which locore stashed
* in code for us. Note that there is a possibility that the
* bit pattern of this register will conflict with one of the
* FPE_* codes defined in signal.h. Fortunately for us, the
* only such codes we use are all in the range 1-7 and the low
* 3 bits of the status register are defined as 0 so there is
* no clash.
*/
ucode = code;
i = SIGFPE;
break;
#endif
#ifdef LUNA2
case T_FPEMULI|T_USER: /* unimplemented FP instuction */
case T_FPEMULD|T_USER: /* unimplemented FP data type */
/* XXX need to FSAVE */
printf("pid %d(%s): unimplemented FP %s at %x (EA %x)\n",
p->p_pid, p->p_comm,
frame.f_format == 2 ? "instruction" : "data type",
frame.f_pc, frame.f_fmt2.f_iaddr);
/* XXX need to FRESTORE */
i = SIGFPE;
break;
#endif
case T_ILLINST|T_USER: /* illegal instruction fault */
case T_PRIVINST|T_USER: /* privileged instruction fault */
ucode = frame.f_format; /* XXX was ILL_PRIVIN_FAULT */
i = SIGILL;
break;
case T_ZERODIV|T_USER: /* Divide by zero */
ucode = frame.f_format; /* XXX was FPE_INTDIV_TRAP */
i = SIGFPE;
break;
case T_CHKINST|T_USER: /* CHK instruction trap */
ucode = frame.f_format; /* XXX was FPE_SUBRNG_TRAP */
i = SIGFPE;
break;
case T_TRAPVINST|T_USER: /* TRAPV instruction trap */
ucode = frame.f_format; /* XXX was FPE_INTOVF_TRAP */
i = SIGFPE;
break;
/*
* XXX: Trace traps are a nightmare.
*
* HP-UX uses trap #1 for breakpoints,
* HPBSD uses trap #2,
* SUN 3.x uses trap #15,
* KGDB uses trap #15 (for kernel breakpoints; handled elsewhere).
*
* HPBSD and HP-UX traps both get mapped by locore.s into T_TRACE.
* SUN 3.x traps get passed through as T_TRAP15 and are not really
* supported yet.
*/
case T_TRACE: /* kernel trace trap */
case T_TRAP15: /* SUN trace trap */
frame.f_sr &= ~PSL_T;
i = SIGTRAP;
break;
case T_TRACE|T_USER: /* user trace trap */
case T_TRAP15|T_USER: /* SUN user trace trap */
frame.f_sr &= ~PSL_T;
i = SIGTRAP;
break;
case T_ASTFLT: /* system async trap, cannot happen */
goto dopanic;
case T_ASTFLT|T_USER: /* user async trap */
astpending = 0;
/*
* We check for software interrupts first. This is because
* they are at a higher level than ASTs, and on a VAX would
* interrupt the AST. We assume that if we are processing
* an AST that we must be at IPL0 so we don't bother to
* check. Note that we ensure that we are at least at SIR
* IPL while processing the SIR.
*/
spl1();
/* fall into... */
case T_SSIR: /* software interrupt */
case T_SSIR|T_USER:
if (ssir & SIR_NET) {
siroff(SIR_NET);
cnt.v_soft++;
netintr();
}
if (ssir & SIR_CLOCK) {
siroff(SIR_CLOCK);
cnt.v_soft++;
softclock();
}
/*
* If this was not an AST trap, we are all done.
*/
if (type != (T_ASTFLT|T_USER)) {
cnt.v_trap--;
return;
}
spl0();
if (p->p_flag & SOWEUPC) {
p->p_flag &= ~SOWEUPC;
ADDUPROF(p);
}
goto out;
case T_MMUFLT: /* kernel mode page fault */
/*
* If we were doing profiling ticks or other user mode
* stuff from interrupt code, Just Say No.
*/
if (p->p_addr->u_pcb.pcb_onfault == fswintr)
goto copyfault;
/* fall into ... */
case T_MMUFLT|T_USER: /* page fault */
{
register vm_offset_t va;
register struct vmspace *vm = p->p_vmspace;
register vm_map_t map;
int rv;
vm_prot_t ftype;
extern vm_map_t kernel_map;
#ifdef DEBUG
if ((mmudebug & MDB_WBFOLLOW) || MDB_ISPID(p->p_pid))
printf("trap: T_MMUFLT pid=%d, code=%x, v=%x, pc=%x, sr=%x\n",
p->p_pid, code, v, frame.f_pc, frame.f_sr);
#endif
/*
* It is only a kernel address space fault iff:
* 1. (type & T_USER) == 0 and
* 2. pcb_onfault not set or
* 3. pcb_onfault set but supervisor space data fault
* The last can occur during an exec() copyin where the
* argument space is lazy-allocated.
*/
if (type == T_MMUFLT &&
(!p->p_addr->u_pcb.pcb_onfault || KDFAULT(code)))
map = kernel_map;
else
map = &vm->vm_map;
if (WRFAULT(code))
ftype = VM_PROT_READ | VM_PROT_WRITE;
else
ftype = VM_PROT_READ;
va = trunc_page((vm_offset_t)v);
#ifdef DEBUG
if (map == kernel_map && va == 0) {
printf("trap: bad kernel access at %x\n", v);
goto dopanic;
}
#endif
rv = vm_fault(map, va, ftype, FALSE);
#ifdef DEBUG
if (rv && MDB_ISPID(p->p_pid))
printf("vm_fault(%x, %x, %x, 0) -> %x\n",
map, va, ftype, rv);
#endif
/*
* If this was a stack access we keep track of the maximum
* accessed stack size. Also, if vm_fault gets a protection
* failure it is due to accessing the stack region outside
* the current limit and we need to reflect that as an access
* error.
*/
if ((caddr_t)va >= vm->vm_maxsaddr && map != kernel_map) {
if (rv == KERN_SUCCESS) {
unsigned nss;
nss = clrnd(btoc(USRSTACK-(unsigned)va));
if (nss > vm->vm_ssize)
vm->vm_ssize = nss;
} else if (rv == KERN_PROTECTION_FAILURE)
rv = KERN_INVALID_ADDRESS;
}
if (rv == KERN_SUCCESS) {
if (type == T_MMUFLT) {
#ifdef LUNA2
if (mmutype == MMU_68040)
(void) writeback(&frame, 1);
#endif
return;
}
goto out;
}
if (type == T_MMUFLT) {
if (p->p_addr->u_pcb.pcb_onfault)
goto copyfault;
printf("vm_fault(%x, %x, %x, 0) -> %x\n",
map, va, ftype, rv);
printf(" type %x, code [mmu,,ssw]: %x\n",
type, code);
goto dopanic;
}
ucode = v;
i = (rv == KERN_PROTECTION_FAILURE) ? SIGBUS : SIGSEGV;
break;
}
}
trapsignal(p, i, ucode);
if ((type & T_USER) == 0)
return;
out:
userret(p, &frame, sticks, v, 1);
}
#ifdef LUNA2
#ifdef DEBUG
struct writebackstats {
int calls;
int cpushes;
int move16s;
int wb1s, wb2s, wb3s;
int wbsize[4];
} wbstats;
char *f7sz[] = { "longword", "byte", "word", "line" };
char *f7tt[] = { "normal", "MOVE16", "AFC", "ACK" };
char *f7tm[] = { "d-push", "u-data", "u-code", "M-data",
"M-code", "k-data", "k-code", "RES" };
char wberrstr[] =
"WARNING: pid %d(%s) writeback [%s] failed, pc=%x fa=%x wba=%x wbd=%x\n";
#endif
writeback(fp, docachepush)
struct frame *fp;
int docachepush;
{
register struct fmt7 *f = &fp->f_fmt7;
register struct proc *p = curproc;
int err = 0;
u_int fa;
caddr_t oonfault = p->p_addr->u_pcb.pcb_onfault;
#ifdef DEBUG
if ((mmudebug & MDB_WBFOLLOW) || MDB_ISPID(p->p_pid)) {
printf(" pid=%d, fa=%x,", p->p_pid, f->f_fa);
dumpssw(f->f_ssw);
}
wbstats.calls++;
#endif
/*
* Deal with special cases first.
*/
if ((f->f_ssw & SSW4_TMMASK) == SSW4_TMDCP) {
/*
* Dcache push fault.
* Line-align the address and write out the push data to
* the indicated physical address.
*/
#ifdef DEBUG
if ((mmudebug & MDB_WBFOLLOW) || MDB_ISPID(p->p_pid)) {
printf(" pushing %s to PA %x, data %x",
f7sz[(f->f_ssw & SSW4_SZMASK) >> 5],
f->f_fa, f->f_pd0);
if ((f->f_ssw & SSW4_SZMASK) == SSW4_SZLN)
printf("/%x/%x/%x",
f->f_pd1, f->f_pd2, f->f_pd3);
printf("\n");
}
if (f->f_wb1s & SSW4_WBSV)
panic("writeback: cache push with WB1S valid");
wbstats.cpushes++;
#endif
/*
* XXX there are security problems if we attempt to do a
* cache push after a signal handler has been called.
*/
if (docachepush) {
pmap_enter(kernel_pmap, (vm_offset_t)vmmap,
trunc_page(f->f_fa), VM_PROT_WRITE, TRUE);
fa = (u_int)&vmmap[(f->f_fa & PGOFSET) & ~0xF];
bcopy((caddr_t)&f->f_pd0, (caddr_t)fa, 16);
DCFL(pmap_extract(kernel_pmap, (vm_offset_t)fa));
pmap_remove(kernel_pmap, (vm_offset_t)vmmap,
(vm_offset_t)&vmmap[NBPG]);
} else
printf("WARNING: pid %d(%s) uid %d: CPUSH not done\n",
p->p_pid, p->p_comm, p->p_ucred->cr_uid);
} else if ((f->f_ssw & (SSW4_RW|SSW4_TTMASK)) == SSW4_TTM16) {
/*
* MOVE16 fault.
* Line-align the address and write out the push data to
* the indicated virtual address.
*/
#ifdef DEBUG
if ((mmudebug & MDB_WBFOLLOW) || MDB_ISPID(p->p_pid))
printf(" MOVE16 to VA %x(%x), data %x/%x/%x/%x\n",
f->f_fa, f->f_fa & ~0xF, f->f_pd0, f->f_pd1,
f->f_pd2, f->f_pd3);
if (f->f_wb1s & SSW4_WBSV)
panic("writeback: MOVE16 with WB1S valid");
wbstats.move16s++;
#endif
if (KDFAULT(f->f_wb1s))
bcopy((caddr_t)&f->f_pd0, (caddr_t)(f->f_fa & ~0xF), 16);
else
err = suline((caddr_t)(f->f_fa & ~0xF), (caddr_t)&f->f_pd0);
if (err) {
fa = f->f_fa & ~0xF;
#ifdef DEBUG
if (mmudebug & MDB_WBFAILED)
printf(wberrstr, p->p_pid, p->p_comm,
"MOVE16", fp->f_pc, f->f_fa,
f->f_fa & ~0xF, f->f_pd0);
#endif
}
} else if (f->f_wb1s & SSW4_WBSV) {
/*
* Writeback #1.
* Position the "memory-aligned" data and write it out.
*/
register u_int wb1d = f->f_wb1d;
register int off;
#ifdef DEBUG
if ((mmudebug & MDB_WBFOLLOW) || MDB_ISPID(p->p_pid))
dumpwb(1, f->f_wb1s, f->f_wb1a, f->f_wb1d);
wbstats.wb1s++;
wbstats.wbsize[(f->f_wb2s&SSW4_SZMASK)>>5]++;
#endif
off = (f->f_wb1a & 3) * 8;
switch (f->f_wb1s & SSW4_SZMASK) {
case SSW4_SZLW:
if (off)
wb1d = (wb1d >> (32 - off)) | (wb1d << off);
if (KDFAULT(f->f_wb1s))
*(long *)f->f_wb1a = wb1d;
else
err = suword((caddr_t)f->f_wb1a, wb1d);
break;
case SSW4_SZB:
off = 24 - off;
if (off)
wb1d >>= off;
if (KDFAULT(f->f_wb1s))
*(char *)f->f_wb1a = wb1d;
else
err = subyte((caddr_t)f->f_wb1a, wb1d);
break;
case SSW4_SZW:
off = (off + 16) % 32;
if (off)
wb1d = (wb1d >> (32 - off)) | (wb1d << off);
if (KDFAULT(f->f_wb1s))
*(short *)f->f_wb1a = wb1d;
else
err = susword((caddr_t)f->f_wb1a, wb1d);
break;
}
if (err) {
fa = f->f_wb1a;
#ifdef DEBUG
if (mmudebug & MDB_WBFAILED)
printf(wberrstr, p->p_pid, p->p_comm,
"#1", fp->f_pc, f->f_fa,
f->f_wb1a, f->f_wb1d);
#endif
}
}
/*
* Deal with the "normal" writebacks.
*
* XXX writeback2 is known to reflect a LINE size writeback after
* a MOVE16 was already dealt with above. Ignore it.
*/
if (err == 0 && (f->f_wb2s & SSW4_WBSV) &&
(f->f_wb2s & SSW4_SZMASK) != SSW4_SZLN) {
#ifdef DEBUG
if ((mmudebug & MDB_WBFOLLOW) || MDB_ISPID(p->p_pid))
dumpwb(2, f->f_wb2s, f->f_wb2a, f->f_wb2d);
wbstats.wb2s++;
wbstats.wbsize[(f->f_wb2s&SSW4_SZMASK)>>5]++;
#endif
switch (f->f_wb2s & SSW4_SZMASK) {
case SSW4_SZLW:
if (KDFAULT(f->f_wb2s))
*(long *)f->f_wb2a = f->f_wb2d;
else
err = suword((caddr_t)f->f_wb2a, f->f_wb2d);
break;
case SSW4_SZB:
if (KDFAULT(f->f_wb2s))
*(char *)f->f_wb2a = f->f_wb2d;
else
err = subyte((caddr_t)f->f_wb2a, f->f_wb2d);
break;
case SSW4_SZW:
if (KDFAULT(f->f_wb2s))
*(short *)f->f_wb2a = f->f_wb2d;
else
err = susword((caddr_t)f->f_wb2a, f->f_wb2d);
break;
}
if (err) {
fa = f->f_wb2a;
#ifdef DEBUG
if (mmudebug & MDB_WBFAILED) {
printf(wberrstr, p->p_pid, p->p_comm,
"#2", fp->f_pc, f->f_fa,
f->f_wb2a, f->f_wb2d);
dumpssw(f->f_ssw);
dumpwb(2, f->f_wb2s, f->f_wb2a, f->f_wb2d);
}
#endif
}
}
if (err == 0 && (f->f_wb3s & SSW4_WBSV)) {
#ifdef DEBUG
if ((mmudebug & MDB_WBFOLLOW) || MDB_ISPID(p->p_pid))
dumpwb(3, f->f_wb3s, f->f_wb3a, f->f_wb3d);
wbstats.wb3s++;
wbstats.wbsize[(f->f_wb3s&SSW4_SZMASK)>>5]++;
#endif
switch (f->f_wb3s & SSW4_SZMASK) {
case SSW4_SZLW:
if (KDFAULT(f->f_wb3s))
*(long *)f->f_wb3a = f->f_wb3d;
else
err = suword((caddr_t)f->f_wb3a, f->f_wb3d);
break;
case SSW4_SZB:
if (KDFAULT(f->f_wb3s))
*(char *)f->f_wb3a = f->f_wb3d;
else
err = subyte((caddr_t)f->f_wb3a, f->f_wb3d);
break;
case SSW4_SZW:
if (KDFAULT(f->f_wb3s))
*(short *)f->f_wb3a = f->f_wb3d;
else
err = susword((caddr_t)f->f_wb3a, f->f_wb3d);
break;
#ifdef DEBUG
case SSW4_SZLN:
panic("writeback: wb3s indicates LINE write");
#endif
}
if (err) {
fa = f->f_wb3a;
#ifdef DEBUG
if (mmudebug & MDB_WBFAILED)
printf(wberrstr, p->p_pid, p->p_comm,
"#3", fp->f_pc, f->f_fa,
f->f_wb3a, f->f_wb3d);
#endif
}
}
p->p_addr->u_pcb.pcb_onfault = oonfault;
/*
* Determine the cause of the failure if any translating to
* a signal. If the corresponding VA is valid and RO it is
* a protection fault (SIGBUS) otherwise consider it an
* illegal reference (SIGSEGV).
*/
if (err) {
if (vm_map_check_protection(&p->p_vmspace->vm_map,
trunc_page(fa), round_page(fa),
VM_PROT_READ) &&
!vm_map_check_protection(&p->p_vmspace->vm_map,
trunc_page(fa), round_page(fa),
VM_PROT_WRITE))
err = SIGBUS;
else
err = SIGSEGV;
}
return(err);
}
#ifdef DEBUG
dumpssw(ssw)
register u_short ssw;
{
printf(" SSW: %x: ", ssw);
if (ssw & SSW4_CP)
printf("CP,");
if (ssw & SSW4_CU)
printf("CU,");
if (ssw & SSW4_CT)
printf("CT,");
if (ssw & SSW4_CM)
printf("CM,");
if (ssw & SSW4_MA)
printf("MA,");
if (ssw & SSW4_ATC)
printf("ATC,");
if (ssw & SSW4_LK)
printf("LK,");
if (ssw & SSW4_RW)
printf("RW,");
printf(" SZ=%s, TT=%s, TM=%s\n",
f7sz[(ssw & SSW4_SZMASK) >> 5],
f7tt[(ssw & SSW4_TTMASK) >> 3],
f7tm[ssw & SSW4_TMMASK]);
}
dumpwb(num, s, a, d)
int num;
u_short s;
u_int a, d;
{
register struct proc *p = curproc;
vm_offset_t pa;
printf(" writeback #%d: VA %x, data %x, SZ=%s, TT=%s, TM=%s\n",
num, a, d, f7sz[(s & SSW4_SZMASK) >> 5],
f7tt[(s & SSW4_TTMASK) >> 3], f7tm[s & SSW4_TMMASK]);
printf(" PA ");
pa = pmap_extract(&p->p_vmspace->vm_pmap, (vm_offset_t)a);
if (pa == 0)
printf("<invalid address>");
else
printf("%x, current value %x", pa, fuword((caddr_t)a));
printf("\n");
}
#endif
#endif
/*
* Proces a system call.
*/
syscall(code, frame)
u_int code;
struct frame frame;
{
register caddr_t params;
register struct sysent *callp;
register struct proc *p;
int error, opc, numsys, s;
u_int argsize;
struct args {
int i[8];
} args;
int rval[2];
u_quad_t sticks;
cnt.v_syscall++;
if (!USERMODE(frame.f_sr))
panic("syscall");
p = curproc;
sticks = p->p_sticks;
p->p_md.md_regs = frame.f_regs;
opc = frame.f_pc - 2;
callp = sysent, numsys = nsysent;
params = (caddr_t)frame.f_regs[SP] + sizeof(int);
switch (code) {
case SYS_syscall:
/*
* Code is first argument, followed by actual args.
*/
code = fuword(params);
params += sizeof(int);
/*
* XXX sigreturn requires special stack manipulation
* that is only done if entered via the sigreturn
* trap. Cannot allow it here so make sure we fail.
*/
if (code == SYS_sigreturn)
code = numsys;
break;
case SYS___syscall:
/*
* Like syscall, but code is a quad, so as to maintain
* quad alignment for the rest of the arguments.
*/
code = fuword(params + _QUAD_LOWWORD * sizeof(int));
params += sizeof(quad_t);
break;
default:
/* nothing to do by default */
break;
}
if (code < numsys)
callp += code;
else
callp += SYS_syscall; /* => nosys */
argsize = callp->sy_narg * sizeof(int);
if (argsize && (error = copyin(params, (caddr_t)&args, argsize))) {
#ifdef KTRACE
if (KTRPOINT(p, KTR_SYSCALL))
ktrsyscall(p->p_tracep, code, callp->sy_narg, args.i);
#endif
goto bad;
}
#ifdef KTRACE
if (KTRPOINT(p, KTR_SYSCALL))
ktrsyscall(p->p_tracep, code, callp->sy_narg, args.i);
#endif
rval[0] = 0;
rval[1] = frame.f_regs[D1];
error = (*callp->sy_call)(p, &args, rval);
switch (error) {
case 0:
/*
* Reinitialize proc pointer `p' as it may be different
* if this is a child returning from fork syscall.
*/
p = curproc;
frame.f_regs[D0] = rval[0];
frame.f_regs[D1] = rval[1];
frame.f_sr &= ~PSL_C;
break;
case ERESTART:
frame.f_pc = opc;
break;
case EJUSTRETURN:
break; /* nothing to do */
default:
bad:
frame.f_regs[D0] = error;
frame.f_sr |= PSL_C;
break;
}
userret(p, &frame, sticks, (u_int)0, 0);
#ifdef KTRACE
if (KTRPOINT(p, KTR_SYSRET))
ktrsysret(p->p_tracep, code, error, rval[0]);
#endif
}