4.4BSD/usr/src/sys/vax/if/if_ix.c
/*
* Copyright (c) 1986 Regents of the University of California.
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* Micom-Interlan Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)if_ix.c 7.8 (Berkeley) 12/16/90
*/
#include "np.h"
#if NNP > 0
/*
* Interlan NP100 Ethernet Communications Controller interface
*/
#include "../include/pte.h"
#include "sys/param.h"
#include "sys/systm.h"
#include "sys/mbuf.h"
#include "sys/buf.h"
#include "sys/protosw.h"
#include "sys/socket.h"
#include "sys/vmmac.h"
#include "sys/ioctl.h"
#include "sys/errno.h"
#include "net/if.h"
#include "net/netisr.h"
#include "net/route.h"
#ifdef INET
#include "netinet/in.h"
#include "netinet/in_systm.h"
#include "netinet/in_var.h"
#include "netinet/ip.h"
#include "netinet/if_ether.h"
#endif
#ifdef NS
#include "netns/ns.h"
#include "netns/ns_if.h"
#endif
#include "../include/cpu.h"
#include "../include/mtpr.h"
#include "../if/if_uba.h"
#include "../uba/ubareg.h"
#include "../uba/ubavar.h"
#include "../uba/npreg.h"
#include "../if/if_ix.h"
int ixattach(), ixrint(), ixcint();
#define ILUNIT(x) minor(x)
int ixinit(), ixioctl(), ixreset(), ixwatch(), ixstart();
int (*IxAttach)() = ixattach;
int (*IxReset)() = ixreset;
/*
* Ethernet software status per interface.
*
* Each interface is referenced by a network interface structure,
* ix_if, which the routing code uses to locate the interface.
* This structure contains the output queue for the interface, its address, ...
* We also have, for each interface, a UBA interface structure, which
* contains information about the UNIBUS resources held by the interface:
* map registers, buffered data paths, etc. Information is cached in this
* structure for use by the if_uba.c routines in running the interface
* efficiently.
*/
struct ix_softc {
struct arpcom ix_ac; /* Ethernet common part */
#define ix_if ix_ac.ac_if /* network-visible interface */
#define ix_addr ix_ac.ac_enaddr /* hardware Ethernet address */
int ix_flags;
#define IXF_OACTIVE 0x1 /* output is active */
#define IXF_RCVPENDING 0x2 /* start rcv in ilcint */
#define IXF_GOTUBA 0x4 /* unibus resources mapped */
#define IXF_RUNNING 0x8 /* board is running */
#define IXF_SETADDR 0x10 /* physical address is changed */
#define IXF_STATPENDING 0x20 /* stat cmd pending */
#define IXF_GOTCQE 0x40 /* np resources available */
#define IXF_OWATCH 0x80 /* is output hung? */
#define IXF_RWATCH 0x100 /* is input hung? */
struct ifuba ix_ifuba; /* unibus resources */
u_short ix_aid; /* Access Id returned by open DDL */
u_short ix_badcqe;
struct npmaster *ix_mp; /* Board physio request header */
struct npreq *ix_rrp; /* Cached npreq for recv */
struct npreq *ix_wrp; /* Cached npreq for xmit */
short ix_scaninterval; /* interval of stat collection */
#define IXWATCHINTERVAL 60 /* once every 60 seconds */
union ix_stats ix_stats; /* holds on-board statistics */
int ix_ubaddr; /* mapping registers of ix_stats */
} ix_softc[NNP];
extern struct uba_device *npdinfo[];
/*
* Interface exists: make available by filling in network interface
* record. System will initialize the interface when it is ready
* to accept packets. We can't even get the ethernet address
* or other interesting data until the board has been downloaded.
* running ifconfig will attempt to start unit.
*/
ixattach(ui)
struct uba_device *ui;
{
register struct ix_softc *ix = &ix_softc[ui->ui_unit];
register struct ifnet *ifp = &ix->ix_if;
extern struct npmaster npmasters[];
ifp->if_unit = ui->ui_unit;
ifp->if_name = "ix";
ifp->if_mtu = ETHERMTU;
ifp->if_flags = IFF_BROADCAST;
ifp->if_init = ixinit;
ifp->if_output = ether_output;
ifp->if_start = ixstart;
ifp->if_ioctl = ixioctl;
ifp->if_reset = ixreset;
ix->ix_mp = npmasters + ui->ui_unit;
ix->ix_ifuba.ifu_flags = UBA_CANTWAIT;
if_attach(ifp);
}
struct npreq *
ix_GetReq(mp, addr, len)
struct npmaster *mp;
caddr_t addr;
{
int unit = mp->unit;
register struct npreq *rp;
register struct CQE *ep;
struct ix_softc *ix = ix_softc + unit;
extern struct npreq *NpGetReq();
while ((rp = NpGetReq(mp->reqtab)) == NULL) {
mp->reqtab->flags |= WANTREQ;
sleep((caddr_t)(mp->reqtab), PZERO - 1);
}
rp->flags = KERNREQ; /* Clear flags */
ep = rp->element; /* Associated CQE */
ep->cqe_famid = (unsign32)ix; /* Process ID */
ep->cqe_wind = 0; /* Amount of buffer mapped */
ep->cqe_nbuf = 1; /* Must be 1, no buffer chain */
ep->cqe_char = 1; /* Driver owns this CQE */
ep->cqe_prot = NPDLA; /* Data Link Access protocol */
ep->cqe_bcnt = len; /* Byte count */
rp->bufaddr = (caddr_t) (UBADDRMASK & (int) addr);/* mapped buffer */
ep->cqe_dma[0] = (unsign16)LOWORD(rp->bufaddr);
ep->cqe_dma[1] = (unsign16)HIWORD(rp->bufaddr);
return (rp);
}
ix_DoReq(mp, rp, cmd, addr, len, rpb, routine)
struct npmaster *mp;
register struct npreq *rp;
u_short cmd;
caddr_t addr;
int len;
register u_short *rpb;
int (*routine)();
{
register struct CQE *ep = rp->element;
register u_short *p = &ep->rpb1;
u_short cnt = *rpb++;
extern long NpDebug;
int pri;
int result = 0;
ep->cqe_ust0 = ep->cqe_ust1 = NPCLEAR; /* Clear status */
ep->cqe_bcnt = len; /* Byte count */
rp->flags = KERNREQ | REQALOC; /* Clear flags */
rp->bufaddr = (caddr_t) (UBADDRMASK & (int) addr);/* mapped buffer */
rp->intr = routine;
rp->user = (caddr_t) (ep->cqe_func = cmd);/* In case pissed on in CQE */
ep->cqe_dma[0] = (unsign16)LOWORD(rp->bufaddr);
ep->cqe_dma[1] = (unsign16)HIWORD(rp->bufaddr);
ep->cqe_lenrpb = cnt + cnt;
for (; cnt > 0; cnt--) *p++ = *rpb++;
if (NpDebug & DEBCQE)
printf("Function is %x ep %x reqid %x\n", ep->cqe_func, ep, ep->cqe_reqid);
if (NpDebug & DEBCQE)
printf("irp len = %x rp = %x\n", ep->cqe_lenrpb, rp);
if (routine == 0) {
NpAddReq(mp->reqtab, rp); /* Queue onto active list */
while (!(rp->flags & REQDONE)) {
pri = spl5();
NpAddCQE(ep, &mp->shmemp->devcq, mp);
sleep((caddr_t)rp, PZERO - 1);
splx(pri);
}
if (rp->flags & IOABORT || ep->cqe_sts != NPDONE
|| ep->cqe_ust0 != NPDONE
|| ep->cqe_ust1 != NPOK) {
struct ix_softc *ix = (struct ix_softc *)ep->cqe_famid;
printf("ix%d: Req failed, cmd %x, stat %x, flags %x, ",
ix->ix_if.if_unit, rp->user,
ep->cqe_sts, rp->flags);
printf("ust error %x,%x\n", ep->cqe_ust0, ep->cqe_ust1);
result = 1;
}
NpRemReq(rp); /* Clear request */
} else {
pri = spl5();
NpAddCQE(ep, &mp->shmemp->devcq, mp);
splx(pri);
}
return(result);
}
/*
* Reset of interface after UNIBUS reset.
* If interface is on specified uba, reset its state.
*/
ixreset(unit, uban, softp)
int unit, uban;
caddr_t softp;
{
register struct uba_device *ui;
int mask = IXF_SETADDR; /* Only remember new physaddr */
if (unit >= NNP || (ui = npdinfo[unit]) == 0 || ui->ui_alive == 0 ||
ui->ui_ubanum != uban)
return;
printf(" ix%d reset", unit);
if (softp)
mask |= IXF_GOTUBA; /* UBA mapping regs still valid; */
ix_softc[unit].ix_if.if_flags &= ~IFF_RUNNING;
ix_softc[unit].ix_flags &= mask;
}
int ix_MacLoop = 0;
/*
* Initialization of interface; clear recorded pending
* operations, and reinitialize UNIBUS usage.
*/
ixinit(unit)
int unit;
{
register struct ix_softc *ix = &ix_softc[unit];
struct uba_device *ui = npdinfo[unit];
register struct ifnet *ifp = &ix->ix_if;
register struct CQE *ep;
struct npreq *rp;
struct npmaster *mp = ix->ix_mp;
register u_short *dpmp = & mp->shmemp->statblock.sb_dpm;
u_short rpb[7];
int s;
/* not yet, if address still unknown */
if ((ifp->if_addrlist == (struct ifaddr *)0) ||
(ix->ix_flags & IXF_RUNNING))
return;
if ((mp->flags & AVAILABLE) == 0 || (*dpmp & PROTOMASK(NPDLA)) == 0) {
ifp->if_flags &= ~IFF_UP;
return;
}
if ((ix->ix_flags & IXF_GOTUBA) == 0) {
ix->ix_ifuba.ifu_flags = UBA_CANTWAIT;
if (if_ubainit(&ix->ix_ifuba, ui->ui_ubanum,
sizeof (struct ether_header), (int)btoc(ETHERMTU)) == 0) {
printf("ix%d: can't initialize\n", unit);
ix->ix_if.if_flags &= ~IFF_UP;
return;
}
ix->ix_ubaddr = uballoc(ui->ui_ubanum, (caddr_t)&ix->ix_stats,
sizeof (union ix_stats), 0);
ix->ix_flags |= IXF_GOTUBA;
}
if ((ix->ix_flags & IXF_GOTCQE) == 0) {
ix->ix_rrp = ix_GetReq(mp, ix->ix_ifuba.ifu_r.ifrw_info,
ETHERMTU);
ix->ix_wrp = ix_GetReq(mp, 0, 0);
ix->ix_flags |= IXF_GOTCQE;
}
rp = ix->ix_wrp;
ep = rp->element;
/* Changing the ethernet address resets the dla module,
so must do it before opening the channel */
if (ix->ix_flags & IXF_SETADDR) {
register char *cp = (char *) &ix->ix_stats;
int spincount;
int x;
/* Try Issuing an open channel request before reprogramming
the physical address */
rpb[0] = 6; /* RPB length */
rpb[2] = 0x10; /* Share with any smart users */
rpb[3] = 0; /* Take (a copy of) all frames */
rpb[5] = 8; /* On board rcv queue length */
rpb[6] = 0; /* XMT packets as is */
if (ix_DoReq(mp, rp, IXC_OPEN, 0, 0, rpb, 0))
return;
/* Proceed with LDPA */
*cp++ = 1;
bcopy(ix->ix_addr, (caddr_t)cp, 6);
rpb[0] = 1; /* RPB length */
if (ix_DoReq(mp, rp, IXC_LDPA, ix->ix_ubaddr, 7, rpb, 0))
return;
#ifndef TheyFinallyFixedTheBoard
/* Board requires some time to reinitialize its protocols */
x = spl1();
spincount = 2000000;
while (((*dpmp & PROTOMASK(NPDLA))==0) && spincount > 0)
spincount--;
if (spincount==0) {
printf("ix%d: failed to reinitialize DLA module\n",
unit);
splx(x);
}
splx(x);
#endif
}
rpb[0] = 6; /* RPB length */
rpb[2] = 0x10; /* Share with any smart users */
if (ix_MacLoop) rpb[2] |= 0x8;
/* Enable software loopback on board */
rpb[3] = 0; /* Take (a copy of) all frames */
rpb[5] = 8; /* On board rcv queue length */
rpb[6] = 0; /* XMT packets as is */
if (ix_DoReq(mp, rp, IXC_OPEN, 0, 0, rpb, 0))
return;
ix->ix_aid = ep->rpb1;
/* Here we request our ethernet address, if we didn't reset it*/
if ((ix->ix_flags & IXF_SETADDR)==0) {
rpb[0] = 2;
rpb[1] = ix->ix_aid;
rpb[2] = 0; /* get all stats */
if (ix_DoReq(mp, rp, IXC_GSTAT, /* Get Stats */
(caddr_t) ix->ix_ubaddr, sizeof(ix->ix_stats) - 8,
rpb, 0))
return;
bcopy((caddr_t) &ix->ix_stats, (caddr_t) ix->ix_addr, 6);
}
ix->ix_if.if_flags |= IFF_RUNNING;
ix->ix_flags |= IXF_RUNNING;
ifp->if_watchdog = ixwatch;
ifp->if_timer = ix->ix_scaninterval = IXWATCHINTERVAL;
ixrint(mp, 0);
}
/*
* Start output on interface.
* Get another datagram to send off of the interface queue,
* and map it to the interface before starting the output.
*/
ixstart(ifp)
struct ifnet *ifp;
{
int len = 0;
int unit = ifp->if_unit;
register struct ix_softc *ix = &ix_softc[unit];
register struct mbuf *n;
struct mbuf *m;
int s, error = 0;
struct npmaster *mp = ix->ix_mp;
struct npreq *rp = ix->ix_wrp;
struct CQE *ep;
u_short rpb[8];
IF_DEQUEUE(&ix->ix_if.if_snd, m);
if (m == 0) {
if (ix->ix_flags & IXF_STATPENDING) {
ix->ix_flags &= ~IXF_STATPENDING;
ix->ix_if.if_flags |= IFF_OACTIVE;
rpb[0] = 2;
rpb[1] = ix->ix_aid;
rpb[2] = 0; /* get all stats */
ix_DoReq(mp, rp, IXC_GSTAT, /* general Stats */
(caddr_t) ix->ix_ubaddr, sizeof(ix->ix_stats) - 8,
rpb, ixcint);
}
return (0);
}
/*
* Ensure minimum packet length.
* This makes the safe assumtion that there are no virtual holes
* after the data.
* For security, it might be wise to zero out the added bytes,
* but we're mainly interested in speed at the moment.
*/
len = if_wubaput(&ix->ix_ifuba, m);
if (len - sizeof(struct ether_header) < ETHERMIN)
len = ETHERMIN + sizeof(struct ether_header);
ix->ix_if.if_flags |= IFF_OACTIVE;
/* Now setup to call np driver */
rpb[0] = 8;
rpb[1] = ix->ix_aid;
ix_DoReq(mp, rp, IXC_XMIT, /* send frame */
ix->ix_ifuba.ifu_w.ifrw_info, len, rpb, ixcint);
return (0);
}
/*
* Command done interrupt. (almost)
*/
ixcint(mp, rp)
struct npmaster *mp;
struct npreq *rp;
{
struct CQE *ep;
register struct ix_softc *ix;
int s = splimp();
ep = rp->element;
ix = (struct ix_softc *)ep->cqe_famid;
ix->ix_flags &= ~IXF_OWATCH;
if ((ix->ix_if.if_flags & IFF_OACTIVE) == 0) {
printf("ix%d: stray xmit interrupt, npreq=%x\n",
ix->ix_if.if_unit, rp);
}
ix->ix_if.if_flags &= ~IFF_OACTIVE;
if (rp->flags & IOABORT || ep->cqe_sts != NPDONE
|| ep->cqe_ust0 != NPDONE || ep->cqe_ust1 != NPOK) {
if (ep->cqe_ust1 == 0x48)
ix->ix_if.if_oerrors++;
else {
struct ix_softc *ix = (struct ix_softc *)ep->cqe_famid;
printf(
"ix%d: ixcint failed, cmd %x, stat %x, flags %x, ",
ix->ix_if.if_unit, rp->user,
ep->cqe_sts, rp->flags);
printf("ust error %x,%x\n", ep->cqe_ust0, ep->cqe_ust1);
if (++ix->ix_badcqe > 65) {
ix->ix_badcqe = 0;
printf("ixcint: shutting down unix dla\n");
ix->ix_if.if_flags &= ~IFF_UP;
}
}
}
else switch (ep->cqe_func) {
case IXC_XMIT:
ix->ix_if.if_opackets++;
break;
case IXC_GSTAT:
ix->ix_if.if_collisions += ix->ix_stats.ixg.macg_xrty;
}
done:
if (ix->ix_ifuba.ifu_xtofree) {
m_freem(ix->ix_ifuba.ifu_xtofree);
ix->ix_ifuba.ifu_xtofree = 0;
}
if ((ix->ix_if.if_flags & (IFF_UP|IFF_RUNNING)) == (IFF_UP|IFF_RUNNING))
(void) ixstart(&ix->ix_if);
splx(s);
}
/*
* Ethernet interface receiver interrupt.
* If input error just drop packet.
* Otherwise purge input buffered data path and examine
* packet to determine type. If can't determine length
* from type, then have to drop packet. Othewise decapsulate
* packet based on type and pass to type specific higher-level
* input routine.
*/
ixrint(mp, rp)
struct npmaster *mp;
struct npreq *rp;
{
struct CQE *ep;
register struct ix_softc *ix = ix_softc + mp->unit;
register struct ether_header *il;
struct mbuf *m;
int len, off, resid, s;
register struct ifqueue *inq;
if ((ix->ix_flags & IXF_RUNNING) == 0)
return;
if (rp == 0)
goto setup;
ix->ix_flags &= ~(IXF_RCVPENDING|IXF_RWATCH);
ep = rp->element;
ix->ix_if.if_ipackets++;
if (ix->ix_ifuba.ifu_flags & UBA_NEEDBDP)
UBAPURGE(ix->ix_ifuba.ifu_uba, ix->ix_ifuba.ifu_r.ifrw_bdp);
il = (struct ether_header *)(ix->ix_ifuba.ifu_r.ifrw_addr);
len = ep->cqe_bcnt - sizeof (struct ether_header);
if (ep->cqe_sts != NPDONE || rp->flags & IOABORT
|| ep->cqe_ust0 != NPDONE
|| ep->cqe_ust1 != NPOK) {
printf("ix%drint: cqe error, cmd %x, stat %x, flags %x, ",
ix->ix_if.if_unit, rp->user, ep->cqe_sts, rp->flags);
printf("ust error %x,%x\n", ep->cqe_ust0, ep->cqe_ust1);
if (++ix->ix_badcqe > 50) {
ix->ix_badcqe = 0;
printf("ixrint: shutting down unix dla\n");
ix->ix_if.if_flags &= ~IFF_UP;
return;
}
goto setup;
}
if ( len < 46 || len > ETHERMTU) {
ix->ix_if.if_ierrors++;
#ifdef notdef
if (ix->ix_if.if_ierrors % 100 == 0)
printf("ix%d: += 100 input errors\n", unit);
#endif
goto setup;
}
/*
* Deal with trailer protocol: if type is trailer type
* get true type from first 16-bit word past data.
* Remember that type was trailer by setting off.
*/
il->ether_type = ntohs((u_short)il->ether_type);
#define ildataaddr(il, off, type) ((type)(((caddr_t)((il)+1)+(off))))
if (il->ether_type >= ETHERTYPE_TRAIL &&
il->ether_type < ETHERTYPE_TRAIL+ETHERTYPE_NTRAILER) {
off = (il->ether_type - ETHERTYPE_TRAIL) * 512;
if (off >= ETHERMTU)
goto setup; /* sanity */
il->ether_type = ntohs(*ildataaddr(il, off, u_short *));
resid = ntohs(*(ildataaddr(il, off+2, u_short *)));
if (off + resid > len)
goto setup; /* sanity */
len = off + resid;
} else
off = 0;
if (len == 0)
goto setup;
/*
* Pull packet off interface. Off is nonzero if packet
* has trailing header; ilget will then force this header
* information to be at the front, but we still have to drop
* the type and length which are at the front of any trailer data.
*/
m = if_rubaget(&ix->ix_ifuba, len, off, &ix->ix_if);
if (m)
ether_input(&ix->ix_if, il, m);
setup:
/*
* Reset for next packet if possible.
* If waiting for transmit command completion, set flag
* and wait until command completes.
*/
if (rp == 0) {
rp = ix->ix_rrp;
rp->intr = ixrint;
ep = rp->element;
}
len = ETHERMTU + sizeof(struct ether_header);
/* Now setup to call np driver */
/* Initializations of request structure */
ep->cqe_func = IXC_RECV; /* get frame */
ep->cqe_ust0 = ep->cqe_ust1 = NPCLEAR; /* Clear status */
ep->cqe_bcnt = len; /* Byte count */
ep->cqe_lenrpb = 10; /* RPB length */
ep->rpb1 = ix->ix_aid; /* which channel */
ep->rpb2 = 65535; /* Timeout */
ix->ix_flags |= IXF_RCVPENDING;
s = spl5();
NpAddCQE(ep, &mp->shmemp->devcq, mp); /* Add CQE to device's queue */
splx(s);
}
long ixwatchcount;
/*
* Watchdog routine, request statistics from board.
*/
ixwatch(unit)
int unit;
{
register struct ix_softc *ix = &ix_softc[unit];
register struct ifnet *ifp = &ix->ix_if;
int s;
ixwatchcount++;
if (ix->ix_badcqe > 1) {
ix->ix_badcqe--; /* If errors aren't happening too fast,
give the board a reprieve */
}
s = splimp();
if (ix->ix_flags & IXF_STATPENDING) {
ifp->if_timer = ix->ix_scaninterval;
ix->ix_flags |= IXF_OWATCH;
splx(s);
return;
}
ix->ix_flags |= IXF_STATPENDING;
if ((ix->ix_if.if_flags & IFF_OACTIVE) == 0)
(void) ixstart(ifp);
else
ix->ix_flags |= IXF_OWATCH;
if (ix->ix_flags & IXF_RCVPENDING)
ix->ix_flags |= IXF_RWATCH;
splx(s);
ifp->if_timer = ix->ix_scaninterval;
}
/*
* Process an ioctl request.
*/
ixioctl(ifp, cmd, data)
register struct ifnet *ifp;
int cmd;
caddr_t data;
{
register struct ifaddr *ifa = (struct ifaddr *)data;
register struct ix_softc *ix = &ix_softc[ifp->if_unit];
int s = splimp(), error = 0;
switch (cmd) {
case SIOCSIFADDR:
ifp->if_flags |= IFF_UP;
ixinit(ifp->if_unit);
if ((ifp->if_flags & IFF_UP) == 0)
return (EBUSY);
switch (ifa->ifa_addr->sa_family) {
#ifdef INET
case AF_INET:
((struct arpcom *)ifp)->ac_ipaddr =
IA_SIN(ifa)->sin_addr;
arpwhohas((struct arpcom *)ifp, &IA_SIN(ifa)->sin_addr);
break;
#endif
#ifdef NS
case AF_NS:
{
register struct ns_addr *ina = &(IA_SNS(ifa)->sns_addr);
if (ns_nullhost(*ina)) {
ina->x_host = * (union ns_host *)
(ix_softc[ifp->if_unit].ix_addr);
} else {
return
ix_setaddr(ina->x_host.c_host, ifp->if_unit);
}
break;
}
#endif
}
break;
case SIOCSIFFLAGS:
if ((ifp->if_flags & IFF_UP) == 0 &&
ix->ix_flags & IXF_RUNNING) {
ix->ix_flags &= ~IXF_RUNNING;
NpReset(ix->ix_mp, 0);
} else if (ifp->if_flags & IFF_UP &&
(ix->ix_flags & IXF_RUNNING) == 0)
ixinit(ifp->if_unit);
break;
default:
error = EINVAL;
}
splx(s);
return (error);
}
/*
* set ethernet address for unit
*/
ix_setaddr(physaddr, unit)
u_char *physaddr;
int unit;
{
register struct ix_softc *ix = &ix_softc[unit];
if (! (ix->ix_flags & IXF_RUNNING))
return (EBUSY);
/* The following is a big cop out due to the fact that
Changing the ethernet address resets the dla module,
so must re-open the channel, anyway. */
bcopy((caddr_t)physaddr, (caddr_t)ix->ix_addr, sizeof ix->ix_addr);
ix->ix_flags &= ~IXF_RUNNING;
ix->ix_flags |= IXF_SETADDR;
ixinit(unit);
NpKill(ix->ix_mp, ix->ix_rrp);
}
static showme() {
return ((int) &(ix_softc->ix_badcqe));
}
#endif