FreeBSD-5.3/sys/netgraph/bluetooth/hci/ng_hci_cmds.c
/*
* ng_hci_cmds.c
*
* Copyright (c) Maksim Yevmenkin <m_evmenkin@yahoo.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $Id: ng_hci_cmds.c,v 1.4 2003/09/08 18:57:51 max Exp $
* $FreeBSD: src/sys/netgraph/bluetooth/hci/ng_hci_cmds.c,v 1.6 2004/04/27 16:38:14 emax Exp $
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/endian.h>
#include <sys/malloc.h>
#include <sys/mbuf.h>
#include <sys/queue.h>
#include <netgraph/ng_message.h>
#include <netgraph/netgraph.h>
#include <netgraph/bluetooth/include/ng_bluetooth.h>
#include <netgraph/bluetooth/include/ng_hci.h>
#include <netgraph/bluetooth/hci/ng_hci_var.h>
#include <netgraph/bluetooth/hci/ng_hci_cmds.h>
#include <netgraph/bluetooth/hci/ng_hci_evnt.h>
#include <netgraph/bluetooth/hci/ng_hci_ulpi.h>
#include <netgraph/bluetooth/hci/ng_hci_misc.h>
/******************************************************************************
******************************************************************************
** HCI commands processing module
******************************************************************************
******************************************************************************/
#undef min
#define min(a, b) ((a) < (b))? (a) : (b)
static int complete_command (ng_hci_unit_p, int, struct mbuf **);
static int process_link_control_params
(ng_hci_unit_p, u_int16_t, struct mbuf *, struct mbuf *);
static int process_link_policy_params
(ng_hci_unit_p, u_int16_t, struct mbuf *, struct mbuf *);
static int process_hc_baseband_params
(ng_hci_unit_p, u_int16_t, struct mbuf *, struct mbuf *);
static int process_info_params
(ng_hci_unit_p, u_int16_t, struct mbuf *, struct mbuf *);
static int process_status_params
(ng_hci_unit_p, u_int16_t, struct mbuf *, struct mbuf *);
static int process_testing_params
(ng_hci_unit_p, u_int16_t, struct mbuf *, struct mbuf *);
static int process_link_control_status
(ng_hci_unit_p, ng_hci_command_status_ep *, struct mbuf *);
static int process_link_policy_status
(ng_hci_unit_p, ng_hci_command_status_ep *, struct mbuf *);
/*
* Send HCI command to the driver.
*/
int
ng_hci_send_command(ng_hci_unit_p unit)
{
struct mbuf *m0 = NULL, *m = NULL;
int free, error = 0;
/* Check if other command is pending */
if (unit->state & NG_HCI_UNIT_COMMAND_PENDING)
return (0);
/* Check if unit can accept our command */
NG_HCI_BUFF_CMD_GET(unit->buffer, free);
if (free == 0)
return (0);
/* Check if driver hook is still ok */
if (unit->drv == NULL || NG_HOOK_NOT_VALID(unit->drv)) {
NG_HCI_WARN(
"%s: %s - hook \"%s\" is not connected or valid\n",
__func__, NG_NODE_NAME(unit->node), NG_HCI_HOOK_DRV);
NG_BT_MBUFQ_DRAIN(&unit->cmdq);
return (ENOTCONN);
}
/*
* Get first command from queue, give it to RAW hook then
* make copy of it and send it to the driver
*/
m0 = NG_BT_MBUFQ_FIRST(&unit->cmdq);
if (m0 == NULL)
return (0);
ng_hci_mtap(unit, m0);
m = m_dup(m0, M_DONTWAIT);
if (m != NULL)
NG_SEND_DATA_ONLY(error, unit->drv, m);
else
error = ENOBUFS;
if (error != 0)
NG_HCI_ERR(
"%s: %s - could not send HCI command, error=%d\n",
__func__, NG_NODE_NAME(unit->node), error);
/*
* Even if we were not able to send command we still pretend
* that everything is OK and let timeout handle that.
*/
NG_HCI_BUFF_CMD_USE(unit->buffer, 1);
NG_HCI_STAT_CMD_SENT(unit->stat);
NG_HCI_STAT_BYTES_SENT(unit->stat, m0->m_pkthdr.len);
/*
* Note: ng_hci_command_timeout() will set
* NG_HCI_UNIT_COMMAND_PENDING flag
*/
ng_hci_command_timeout(unit);
return (0);
} /* ng_hci_send_command */
/*
* Process HCI Command_Compete event. Complete HCI command, and do post
* processing on the command parameters (cp) and command return parameters
* (e) if required (for example adjust state).
*/
int
ng_hci_process_command_complete(ng_hci_unit_p unit, struct mbuf *e)
{
ng_hci_command_compl_ep *ep = NULL;
struct mbuf *cp = NULL;
int error = 0;
/* Get event packet and update command buffer info */
NG_HCI_M_PULLUP(e, sizeof(*ep));
if (e == NULL)
return (ENOBUFS); /* XXX this is bad */
ep = mtod(e, ng_hci_command_compl_ep *);
NG_HCI_BUFF_CMD_SET(unit->buffer, ep->num_cmd_pkts);
/* Check for special NOOP command */
if (ep->opcode == 0x0000) {
NG_FREE_M(e);
goto out;
}
/* Try to match first command item in the queue */
error = complete_command(unit, ep->opcode, &cp);
if (error != 0) {
NG_FREE_M(e);
goto out;
}
/*
* Perform post processing on command parameters and return parameters
* do it only if status is OK (status == 0). Status is the first byte
* of any command return parameters.
*/
ep->opcode = le16toh(ep->opcode);
m_adj(e, sizeof(*ep));
if (*mtod(e, u_int8_t *) == 0) { /* XXX m_pullup here? */
switch (NG_HCI_OGF(ep->opcode)) {
case NG_HCI_OGF_LINK_CONTROL:
error = process_link_control_params(unit,
NG_HCI_OCF(ep->opcode), cp, e);
break;
case NG_HCI_OGF_LINK_POLICY:
error = process_link_policy_params(unit,
NG_HCI_OCF(ep->opcode), cp, e);
break;
case NG_HCI_OGF_HC_BASEBAND:
error = process_hc_baseband_params(unit,
NG_HCI_OCF(ep->opcode), cp, e);
break;
case NG_HCI_OGF_INFO:
error = process_info_params(unit,
NG_HCI_OCF(ep->opcode), cp, e);
break;
case NG_HCI_OGF_STATUS:
error = process_status_params(unit,
NG_HCI_OCF(ep->opcode), cp, e);
break;
case NG_HCI_OGF_TESTING:
error = process_testing_params(unit,
NG_HCI_OCF(ep->opcode), cp, e);
break;
case NG_HCI_OGF_BT_LOGO:
case NG_HCI_OGF_VENDOR:
NG_FREE_M(cp);
NG_FREE_M(e);
break;
default:
NG_FREE_M(cp);
NG_FREE_M(e);
error = EINVAL;
break;
}
} else {
NG_HCI_ERR(
"%s: %s - HCI command failed, OGF=%#x, OCF=%#x, status=%#x\n",
__func__, NG_NODE_NAME(unit->node),
NG_HCI_OGF(ep->opcode), NG_HCI_OCF(ep->opcode),
*mtod(e, u_int8_t *));
NG_FREE_M(cp);
NG_FREE_M(e);
}
out:
ng_hci_send_command(unit);
return (error);
} /* ng_hci_process_command_complete */
/*
* Process HCI Command_Status event. Check the status (mst) and do post
* processing (if required).
*/
int
ng_hci_process_command_status(ng_hci_unit_p unit, struct mbuf *e)
{
ng_hci_command_status_ep *ep = NULL;
struct mbuf *cp = NULL;
int error = 0;
/* Update command buffer info */
NG_HCI_M_PULLUP(e, sizeof(*ep));
if (e == NULL)
return (ENOBUFS); /* XXX this is bad */
ep = mtod(e, ng_hci_command_status_ep *);
NG_HCI_BUFF_CMD_SET(unit->buffer, ep->num_cmd_pkts);
/* Check for special NOOP command */
if (ep->opcode == 0x0000)
goto out;
/* Try to match first command item in the queue */
error = complete_command(unit, ep->opcode, &cp);
if (error != 0)
goto out;
/*
* Perform post processing on HCI Command_Status event
*/
ep->opcode = le16toh(ep->opcode);
switch (NG_HCI_OGF(ep->opcode)) {
case NG_HCI_OGF_LINK_CONTROL:
error = process_link_control_status(unit, ep, cp);
break;
case NG_HCI_OGF_LINK_POLICY:
error = process_link_policy_status(unit, ep, cp);
break;
case NG_HCI_OGF_BT_LOGO:
case NG_HCI_OGF_VENDOR:
NG_FREE_M(cp);
break;
case NG_HCI_OGF_HC_BASEBAND:
case NG_HCI_OGF_INFO:
case NG_HCI_OGF_STATUS:
case NG_HCI_OGF_TESTING:
default:
NG_FREE_M(cp);
error = EINVAL;
break;
}
out:
NG_FREE_M(e);
ng_hci_send_command(unit);
return (error);
} /* ng_hci_process_command_status */
/*
* Complete queued HCI command.
*/
static int
complete_command(ng_hci_unit_p unit, int opcode, struct mbuf **cp)
{
struct mbuf *m = NULL;
/* Check unit state */
if (!(unit->state & NG_HCI_UNIT_COMMAND_PENDING)) {
NG_HCI_ALERT(
"%s: %s - no pending command, state=%#x\n",
__func__, NG_NODE_NAME(unit->node), unit->state);
return (EINVAL);
}
/* Get first command in the queue */
m = NG_BT_MBUFQ_FIRST(&unit->cmdq);
if (m == NULL) {
NG_HCI_ALERT(
"%s: %s - empty command queue?!\n", __func__, NG_NODE_NAME(unit->node));
return (EINVAL);
}
/*
* Match command opcode, if does not match - do nothing and
* let timeout handle that.
*/
if (mtod(m, ng_hci_cmd_pkt_t *)->opcode != opcode) {
NG_HCI_ALERT(
"%s: %s - command queue is out of sync\n", __func__, NG_NODE_NAME(unit->node));
return (EINVAL);
}
/*
* Now we can remove command timeout, dequeue completed command
* and return command parameters. ng_hci_command_untimeout will
* drop NG_HCI_UNIT_COMMAND_PENDING flag.
* Note: if ng_hci_command_untimeout() fails (returns non-zero)
* then timeout aready happened and timeout message went info node
* queue. In this case we ignore command completion and pretend
* there is a timeout.
*/
if (ng_hci_command_untimeout(unit) != 0)
return (ETIMEDOUT);
NG_BT_MBUFQ_DEQUEUE(&unit->cmdq, *cp);
m_adj(*cp, sizeof(ng_hci_cmd_pkt_t));
return (0);
} /* complete_command */
/*
* Process HCI command timeout
*/
void
ng_hci_process_command_timeout(node_p node, hook_p hook, void *arg1, int arg2)
{
ng_hci_unit_p unit = NULL;
struct mbuf *m = NULL;
u_int16_t opcode;
if (NG_NODE_NOT_VALID(node)) {
printf("%s: Netgraph node is not valid\n", __func__);
return;
}
unit = (ng_hci_unit_p) NG_NODE_PRIVATE(node);
if (unit->state & NG_HCI_UNIT_COMMAND_PENDING) {
unit->state &= ~NG_HCI_UNIT_COMMAND_PENDING;
NG_BT_MBUFQ_DEQUEUE(&unit->cmdq, m);
if (m == NULL) {
NG_HCI_ALERT(
"%s: %s - command queue is out of sync!\n", __func__, NG_NODE_NAME(unit->node));
return;
}
opcode = le16toh(mtod(m, ng_hci_cmd_pkt_t *)->opcode);
NG_FREE_M(m);
NG_HCI_ERR(
"%s: %s - unable to complete HCI command OGF=%#x, OCF=%#x. Timeout\n",
__func__, NG_NODE_NAME(unit->node), NG_HCI_OGF(opcode),
NG_HCI_OCF(opcode));
/* Try to send more commands */
NG_HCI_BUFF_CMD_SET(unit->buffer, 1);
ng_hci_send_command(unit);
} else
NG_HCI_ALERT(
"%s: %s - no pending command\n", __func__, NG_NODE_NAME(unit->node));
} /* ng_hci_process_command_timeout */
/*
* Process link command return parameters
*/
static int
process_link_control_params(ng_hci_unit_p unit, u_int16_t ocf,
struct mbuf *mcp, struct mbuf *mrp)
{
int error = 0;
switch (ocf) {
case NG_HCI_OCF_INQUIRY_CANCEL:
case NG_HCI_OCF_PERIODIC_INQUIRY:
case NG_HCI_OCF_EXIT_PERIODIC_INQUIRY:
case NG_HCI_OCF_LINK_KEY_REP:
case NG_HCI_OCF_LINK_KEY_NEG_REP:
case NG_HCI_OCF_PIN_CODE_REP:
case NG_HCI_OCF_PIN_CODE_NEG_REP:
/* These do not need post processing */
break;
case NG_HCI_OCF_INQUIRY:
case NG_HCI_OCF_CREATE_CON:
case NG_HCI_OCF_DISCON:
case NG_HCI_OCF_ADD_SCO_CON:
case NG_HCI_OCF_ACCEPT_CON:
case NG_HCI_OCF_REJECT_CON:
case NG_HCI_OCF_CHANGE_CON_PKT_TYPE:
case NG_HCI_OCF_AUTH_REQ:
case NG_HCI_OCF_SET_CON_ENCRYPTION:
case NG_HCI_OCF_CHANGE_CON_LINK_KEY:
case NG_HCI_OCF_MASTER_LINK_KEY:
case NG_HCI_OCF_REMOTE_NAME_REQ:
case NG_HCI_OCF_READ_REMOTE_FEATURES:
case NG_HCI_OCF_READ_REMOTE_VER_INFO:
case NG_HCI_OCF_READ_CLOCK_OFFSET:
default:
/*
* None of these command was supposed to generate
* Command_Complete event. Instead Command_Status event
* should have been generated and then appropriate event
* should have been sent to indicate the final result.
*/
error = EINVAL;
break;
}
NG_FREE_M(mcp);
NG_FREE_M(mrp);
return (error);
} /* process_link_control_params */
/*
* Process link policy command return parameters
*/
static int
process_link_policy_params(ng_hci_unit_p unit, u_int16_t ocf,
struct mbuf *mcp, struct mbuf *mrp)
{
int error = 0;
switch (ocf){
case NG_HCI_OCF_ROLE_DISCOVERY: {
ng_hci_role_discovery_rp *rp = NULL;
ng_hci_unit_con_t *con = NULL;
u_int16_t h;
NG_HCI_M_PULLUP(mrp, sizeof(*rp));
if (mrp != NULL) {
rp = mtod(mrp, ng_hci_role_discovery_rp *);
h = NG_HCI_CON_HANDLE(le16toh(rp->con_handle));
con = ng_hci_con_by_handle(unit, h);
if (con == NULL) {
NG_HCI_ALERT(
"%s: %s - invalid connection handle=%d\n",
__func__, NG_NODE_NAME(unit->node), h);
error = ENOENT;
} else if (con->link_type != NG_HCI_LINK_ACL) {
NG_HCI_ALERT(
"%s: %s - invalid link type=%d\n", __func__, NG_NODE_NAME(unit->node),
con->link_type);
error = EINVAL;
} else
con->role = rp->role;
} else
error = ENOBUFS;
} break;
case NG_HCI_OCF_READ_LINK_POLICY_SETTINGS:
case NG_HCI_OCF_WRITE_LINK_POLICY_SETTINGS:
/* These do not need post processing */
break;
case NG_HCI_OCF_HOLD_MODE:
case NG_HCI_OCF_SNIFF_MODE:
case NG_HCI_OCF_EXIT_SNIFF_MODE:
case NG_HCI_OCF_PARK_MODE:
case NG_HCI_OCF_EXIT_PARK_MODE:
case NG_HCI_OCF_QOS_SETUP:
case NG_HCI_OCF_SWITCH_ROLE:
default:
/*
* None of these command was supposed to generate
* Command_Complete event. Instead Command_Status event
* should have been generated and then appropriate event
* should have been sent to indicate the final result.
*/
error = EINVAL;
break;
}
NG_FREE_M(mcp);
NG_FREE_M(mrp);
return (error);
} /* process_link_policy_params */
/*
* Process HC and baseband command return parameters
*/
int
process_hc_baseband_params(ng_hci_unit_p unit, u_int16_t ocf,
struct mbuf *mcp, struct mbuf *mrp)
{
int error = 0;
switch (ocf) {
case NG_HCI_OCF_SET_EVENT_MASK:
case NG_HCI_OCF_SET_EVENT_FILTER:
case NG_HCI_OCF_FLUSH: /* XXX Do we need to handle that? */
case NG_HCI_OCF_READ_PIN_TYPE:
case NG_HCI_OCF_WRITE_PIN_TYPE:
case NG_HCI_OCF_CREATE_NEW_UNIT_KEY:
case NG_HCI_OCF_WRITE_STORED_LINK_KEY:
case NG_HCI_OCF_WRITE_CON_ACCEPT_TIMO:
case NG_HCI_OCF_WRITE_PAGE_TIMO:
case NG_HCI_OCF_READ_SCAN_ENABLE:
case NG_HCI_OCF_WRITE_SCAN_ENABLE:
case NG_HCI_OCF_WRITE_PAGE_SCAN_ACTIVITY:
case NG_HCI_OCF_WRITE_INQUIRY_SCAN_ACTIVITY:
case NG_HCI_OCF_READ_AUTH_ENABLE:
case NG_HCI_OCF_WRITE_AUTH_ENABLE:
case NG_HCI_OCF_READ_ENCRYPTION_MODE:
case NG_HCI_OCF_WRITE_ENCRYPTION_MODE:
case NG_HCI_OCF_WRITE_VOICE_SETTINGS:
case NG_HCI_OCF_READ_NUM_BROADCAST_RETRANS:
case NG_HCI_OCF_WRITE_NUM_BROADCAST_RETRANS:
case NG_HCI_OCF_READ_HOLD_MODE_ACTIVITY:
case NG_HCI_OCF_WRITE_HOLD_MODE_ACTIVITY:
case NG_HCI_OCF_READ_SCO_FLOW_CONTROL:
case NG_HCI_OCF_WRITE_SCO_FLOW_CONTROL:
case NG_HCI_OCF_H2HC_FLOW_CONTROL: /* XXX Not supported this time */
case NG_HCI_OCF_HOST_BUFFER_SIZE:
case NG_HCI_OCF_READ_IAC_LAP:
case NG_HCI_OCF_WRITE_IAC_LAP:
case NG_HCI_OCF_READ_PAGE_SCAN_PERIOD:
case NG_HCI_OCF_WRITE_PAGE_SCAN_PERIOD:
case NG_HCI_OCF_READ_PAGE_SCAN:
case NG_HCI_OCF_WRITE_PAGE_SCAN:
case NG_HCI_OCF_READ_LINK_SUPERVISION_TIMO:
case NG_HCI_OCF_WRITE_LINK_SUPERVISION_TIMO:
case NG_HCI_OCF_READ_SUPPORTED_IAC_NUM:
case NG_HCI_OCF_READ_STORED_LINK_KEY:
case NG_HCI_OCF_DELETE_STORED_LINK_KEY:
case NG_HCI_OCF_READ_CON_ACCEPT_TIMO:
case NG_HCI_OCF_READ_PAGE_TIMO:
case NG_HCI_OCF_READ_PAGE_SCAN_ACTIVITY:
case NG_HCI_OCF_READ_INQUIRY_SCAN_ACTIVITY:
case NG_HCI_OCF_READ_VOICE_SETTINGS:
case NG_HCI_OCF_READ_AUTO_FLUSH_TIMO:
case NG_HCI_OCF_WRITE_AUTO_FLUSH_TIMO:
case NG_HCI_OCF_READ_XMIT_LEVEL:
case NG_HCI_OCF_HOST_NUM_COMPL_PKTS: /* XXX Can get here? */
case NG_HCI_OCF_CHANGE_LOCAL_NAME:
case NG_HCI_OCF_READ_LOCAL_NAME:
case NG_HCI_OCF_READ_UNIT_CLASS:
case NG_HCI_OCF_WRITE_UNIT_CLASS:
/* These do not need post processing */
break;
case NG_HCI_OCF_RESET: {
ng_hci_unit_con_p con = NULL;
int size;
/*
* XXX
*
* After RESET command unit goes into standby mode
* and all operational state is lost. Host controller
* will revert to default values for all parameters.
*
* For now we shall terminate all connections and drop
* inited bit. After RESET unit must be re-initialized.
*/
while (!LIST_EMPTY(&unit->con_list)) {
con = LIST_FIRST(&unit->con_list);
/* Remove all timeouts (if any) */
if (con->flags & NG_HCI_CON_TIMEOUT_PENDING)
ng_hci_con_untimeout(con);
/* Connection terminated by local host */
ng_hci_lp_discon_ind(con, 0x16);
ng_hci_free_con(con);
}
NG_HCI_BUFF_ACL_TOTAL(unit->buffer, size);
NG_HCI_BUFF_ACL_FREE(unit->buffer, size);
NG_HCI_BUFF_SCO_TOTAL(unit->buffer, size);
NG_HCI_BUFF_SCO_FREE(unit->buffer, size);
unit->state &= ~NG_HCI_UNIT_INITED;
} break;
default:
error = EINVAL;
break;
}
NG_FREE_M(mcp);
NG_FREE_M(mrp);
return (error);
} /* process_hc_baseband_params */
/*
* Process info command return parameters
*/
static int
process_info_params(ng_hci_unit_p unit, u_int16_t ocf, struct mbuf *mcp,
struct mbuf *mrp)
{
int error = 0, len;
switch (ocf) {
case NG_HCI_OCF_READ_LOCAL_VER:
case NG_HCI_OCF_READ_COUNTRY_CODE:
break;
case NG_HCI_OCF_READ_LOCAL_FEATURES:
m_adj(mrp, sizeof(u_int8_t));
len = min(mrp->m_pkthdr.len, sizeof(unit->features));
m_copydata(mrp, 0, len, (caddr_t) unit->features);
break;
case NG_HCI_OCF_READ_BUFFER_SIZE: {
ng_hci_read_buffer_size_rp *rp = NULL;
/* Do not update buffer descriptor if node was initialized */
if ((unit->state & NG_HCI_UNIT_READY) == NG_HCI_UNIT_READY)
break;
NG_HCI_M_PULLUP(mrp, sizeof(*rp));
if (mrp != NULL) {
rp = mtod(mrp, ng_hci_read_buffer_size_rp *);
NG_HCI_BUFF_ACL_SET(
unit->buffer,
le16toh(rp->num_acl_pkt), /* number */
le16toh(rp->max_acl_size), /* size */
le16toh(rp->num_acl_pkt) /* free */
);
NG_HCI_BUFF_SCO_SET(
unit->buffer,
le16toh(rp->num_sco_pkt), /* number */
rp->max_sco_size, /* size */
le16toh(rp->num_sco_pkt) /* free */
);
/* Let upper layers know */
ng_hci_node_is_up(unit->node, unit->acl, NULL, 0);
ng_hci_node_is_up(unit->node, unit->sco, NULL, 0);
} else
error = ENOBUFS;
} break;
case NG_HCI_OCF_READ_BDADDR:
/* Do not update BD_ADDR if node was initialized */
if ((unit->state & NG_HCI_UNIT_READY) == NG_HCI_UNIT_READY)
break;
m_adj(mrp, sizeof(u_int8_t));
len = min(mrp->m_pkthdr.len, sizeof(unit->bdaddr));
m_copydata(mrp, 0, len, (caddr_t) &unit->bdaddr);
/* Let upper layers know */
ng_hci_node_is_up(unit->node, unit->acl, NULL, 0);
ng_hci_node_is_up(unit->node, unit->sco, NULL, 0);
break;
default:
error = EINVAL;
break;
}
NG_FREE_M(mcp);
NG_FREE_M(mrp);
return (error);
} /* process_info_params */
/*
* Process status command return parameters
*/
static int
process_status_params(ng_hci_unit_p unit, u_int16_t ocf, struct mbuf *mcp,
struct mbuf *mrp)
{
int error = 0;
switch (ocf) {
case NG_HCI_OCF_READ_FAILED_CONTACT_CNTR:
case NG_HCI_OCF_RESET_FAILED_CONTACT_CNTR:
case NG_HCI_OCF_GET_LINK_QUALITY:
case NG_HCI_OCF_READ_RSSI:
/* These do not need post processing */
break;
default:
error = EINVAL;
break;
}
NG_FREE_M(mcp);
NG_FREE_M(mrp);
return (error);
} /* process_status_params */
/*
* Process testing command return parameters
*/
int
process_testing_params(ng_hci_unit_p unit, u_int16_t ocf, struct mbuf *mcp,
struct mbuf *mrp)
{
int error = 0;
switch (ocf) {
/*
* XXX FIXME
* We do not support these features at this time. However,
* HCI node could support this and do something smart. At least
* node can change unit state.
*/
case NG_HCI_OCF_READ_LOOPBACK_MODE:
case NG_HCI_OCF_WRITE_LOOPBACK_MODE:
case NG_HCI_OCF_ENABLE_UNIT_UNDER_TEST:
break;
default:
error = EINVAL;
break;
}
NG_FREE_M(mcp);
NG_FREE_M(mrp);
return (error);
} /* process_testing_params */
/*
* Process link control command status
*/
static int
process_link_control_status(ng_hci_unit_p unit, ng_hci_command_status_ep *ep,
struct mbuf *mcp)
{
int error = 0;
switch (NG_HCI_OCF(ep->opcode)) {
case NG_HCI_OCF_INQUIRY:
case NG_HCI_OCF_DISCON: /* XXX */
case NG_HCI_OCF_REJECT_CON: /* XXX */
case NG_HCI_OCF_CHANGE_CON_PKT_TYPE:
case NG_HCI_OCF_AUTH_REQ:
case NG_HCI_OCF_SET_CON_ENCRYPTION:
case NG_HCI_OCF_CHANGE_CON_LINK_KEY:
case NG_HCI_OCF_MASTER_LINK_KEY:
case NG_HCI_OCF_REMOTE_NAME_REQ:
case NG_HCI_OCF_READ_REMOTE_FEATURES:
case NG_HCI_OCF_READ_REMOTE_VER_INFO:
case NG_HCI_OCF_READ_CLOCK_OFFSET:
/* These do not need post processing */
break;
case NG_HCI_OCF_CREATE_CON:
break;
case NG_HCI_OCF_ADD_SCO_CON:
break;
case NG_HCI_OCF_ACCEPT_CON:
break;
case NG_HCI_OCF_INQUIRY_CANCEL:
case NG_HCI_OCF_PERIODIC_INQUIRY:
case NG_HCI_OCF_EXIT_PERIODIC_INQUIRY:
case NG_HCI_OCF_LINK_KEY_REP:
case NG_HCI_OCF_LINK_KEY_NEG_REP:
case NG_HCI_OCF_PIN_CODE_REP:
case NG_HCI_OCF_PIN_CODE_NEG_REP:
default:
/*
* None of these command was supposed to generate
* Command_Status event. Instead Command_Complete event
* should have been sent.
*/
error = EINVAL;
break;
}
NG_FREE_M(mcp);
return (error);
} /* process_link_control_status */
/*
* Process link policy command status
*/
static int
process_link_policy_status(ng_hci_unit_p unit, ng_hci_command_status_ep *ep,
struct mbuf *mcp)
{
int error = 0;
switch (NG_HCI_OCF(ep->opcode)) {
case NG_HCI_OCF_HOLD_MODE:
case NG_HCI_OCF_SNIFF_MODE:
case NG_HCI_OCF_EXIT_SNIFF_MODE:
case NG_HCI_OCF_PARK_MODE:
case NG_HCI_OCF_EXIT_PARK_MODE:
case NG_HCI_OCF_SWITCH_ROLE:
/* These do not need post processing */
break;
case NG_HCI_OCF_QOS_SETUP:
break;
case NG_HCI_OCF_ROLE_DISCOVERY:
case NG_HCI_OCF_READ_LINK_POLICY_SETTINGS:
case NG_HCI_OCF_WRITE_LINK_POLICY_SETTINGS:
default:
/*
* None of these command was supposed to generate
* Command_Status event. Instead Command_Complete event
* should have been sent.
*/
error = EINVAL;
break;
}
NG_FREE_M(mcp);
return (error);
} /* process_link_policy_status */