FreeBSD-5.3/etc/namedb/named.conf

// $FreeBSD: src/etc/namedb/named.conf,v 1.15.2.1 2004/09/30 23:36:07 dougb Exp $
//
// Refer to the named.conf(5) and named(8) man pages, and the documentation
// in /usr/share/doc/bind9 for more details.
//
// If you are going to set up an authoritative server, make sure you
// understand the hairy details of how DNS works.  Even with
// simple mistakes, you can break connectivity for affected parties,
// or cause huge amounts of useless Internet traffic.

options {
	directory	"/etc/namedb";
	pid-file	"/var/run/named/pid";
	dump-file	"/var/dump/named_dump.db";
	statistics-file	"/var/stats/named.stats";

// If named is being used only as a local resolver, this is a safe default.
// For named to be accessible to the network, comment this option, specify
// the proper IP address, or delete this option.
	listen-on	{ 127.0.0.1; };

// If you have IPv6 enabled on this system, uncomment this option for
// use as a local resolver.  To give access to the network, specify
// an IPv6 address, or the keyword "any".
//	listen-on-v6	{ ::1; };

// In addition to the "forwarders" clause, you can force your name
// server to never initiate queries of its own, but always ask its
// forwarders only, by enabling the following line:
//
//      forward only;

// If you've got a DNS server around at your upstream provider, enter
// its IP address here, and enable the line below.  This will make you
// benefit from its cache, thus reduce overall DNS traffic in the Internet.
/*
	forwarders {
		127.0.0.1;
	};
*/
	/*
	 * If there is a firewall between you and nameservers you want
	 * to talk to, you might need to uncomment the query-source
	 * directive below.  Previous versions of BIND always asked
	 * questions using port 53, but BIND versions 8 and later
	 * use a pseudo-random unprivileged UDP port by default.
	 */
	// query-source address * port 53;
};

// If you enable a local name server, don't forget to enter 127.0.0.1
// first in your /etc/resolv.conf so this server will be queried.
// Also, make sure to enable it in /etc/rc.conf.

zone "." {
	type hint;
	file "named.root";
};

zone "0.0.127.IN-ADDR.ARPA" {
	type master;
	file "master/localhost.rev";
};

// RFC 3152
zone "1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPA" {
	type master;
	file "master/localhost-v6.rev";
};

// RFC 1886 -- deprecated
zone "1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.INT" {
	type master;
	file "master/localhost-v6.rev";
};

// NB: Do not use the IP addresses below, they are faked, and only
// serve demonstration/documentation purposes!
//
// Example slave zone config entries.  It can be convenient to become
// a slave at least for the zone your own domain is in.  Ask
// your network administrator for the IP address of the responsible
// primary.
//
// Never forget to include the reverse lookup (IN-ADDR.ARPA) zone!
// (This is named after the first bytes of the IP address, in reverse
// order, with ".IN-ADDR.ARPA" appended.)
//
// Before starting to set up a primary zone, make sure you fully
// understand how DNS and BIND works.  There are sometimes
// non-obvious pitfalls.  Setting up a slave zone is simpler.
//
// NB: Don't blindly enable the examples below. :-)  Use actual names
// and addresses instead.

/*
zone "example.com" {
	type slave;
	file "slave/example.com";
	masters {
		192.168.1.1;
	};
};

zone "0.168.192.in-addr.arpa" {
	type slave;
	file "slave/0.168.192.in-addr.arpa";
	masters {
		192.168.1.1;
	};
};
*/