FreeBSD-5.3/sys/dev/ata/ata-cbus.c

Compare this file to the similar file:
Show the results in this format:

/*-
 * Copyright (c) 2002 - 2004 Søren Schmidt <sos@FreeBSD.org>
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer,
 *    without modification, immediately at the beginning of the file.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include <sys/cdefs.h>
__FBSDID("$FreeBSD: src/sys/dev/ata/ata-cbus.c,v 1.13.2.1 2004/10/10 15:01:47 sos Exp $");

#include "opt_ata.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/ata.h>
#include <sys/bus.h>
#include <sys/malloc.h>
#include <sys/module.h>
#include <sys/conf.h>
#include <sys/sema.h>
#include <sys/taskqueue.h>
#include <vm/uma.h>
#include <machine/resource.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <isa/isavar.h>
#include <dev/ata/ata-all.h>

/* local vars */
struct ata_cbus_controller {
    struct resource *io;
    struct resource *altio;
    struct resource *bankio;
    struct resource *irq;
    void *ih;
    void (*setmode)(struct ata_device *, int);
    int (*locking)(struct ata_channel *, int);
    struct mtx bank_mtx;
    int current_bank;
    int restart_bank;
    struct {
	void (*function)(void *);
	void *argument;
    } interrupt[2];
};

/* local prototypes */
static void ata_cbus_intr(void *);
static int ata_cbus_banking(struct ata_channel *, int);
static void ata_cbus_setmode(struct ata_device *, int);

static int
ata_cbus_probe(device_t dev)
{
    struct resource *io;
    int rid;
    u_long tmp;

    /* dont probe PnP devices */
    if (isa_get_vendorid(dev))
	return (ENXIO);

    /* allocate the ioport range */
    rid = ATA_IOADDR_RID;
    io = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0,
			    ATA_PC98_IOSIZE, RF_ACTIVE);
    if (!io)
	return ENOMEM;

    /* calculate & set the altport range */
    rid = ATA_PC98_ALTADDR_RID;
    if (bus_get_resource(dev, SYS_RES_IOPORT, rid, &tmp, &tmp)) {
	bus_set_resource(dev, SYS_RES_IOPORT, rid,
			 rman_get_start(io)+ATA_PC98_ALTOFFSET, ATA_ALTIOSIZE);
    }

    /* calculate & set the bank range */
    rid = ATA_PC98_BANKADDR_RID;
    if (bus_get_resource(dev, SYS_RES_IOPORT, rid, &tmp, &tmp)) {
	bus_set_resource(dev, SYS_RES_IOPORT, rid,
			 ATA_PC98_BANK, ATA_PC98_BANKIOSIZE);
    }

    bus_release_resource(dev, SYS_RES_IOPORT, ATA_IOADDR_RID, io);
    return 0;
}

static int
ata_cbus_attach(device_t dev)
{
    struct ata_cbus_controller *ctlr = device_get_softc(dev);
    int rid;

    /* allocate resources */
    rid = ATA_IOADDR_RID;
    ctlr->io = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0,
				  ATA_PC98_IOSIZE, RF_ACTIVE);
    if (!ctlr->io)
       return ENOMEM;

    rid = ATA_PC98_ALTADDR_RID;
    ctlr->altio = 
	bus_alloc_resource(dev, SYS_RES_IOPORT, &rid,
			   rman_get_start(ctlr->io) + ATA_PC98_ALTOFFSET, ~0,
			   ATA_ALTIOSIZE, RF_ACTIVE);
    if (!ctlr->altio) {
	bus_release_resource(dev, SYS_RES_IOPORT, ATA_IOADDR_RID, ctlr->io);
	return ENOMEM;
    }

    rid = ATA_PC98_BANKADDR_RID;
    ctlr->bankio = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid,
				      ATA_PC98_BANK, ~0,
				      ATA_PC98_BANKIOSIZE, RF_ACTIVE);
    if (!ctlr->bankio) {
	bus_release_resource(dev, SYS_RES_IOPORT, ATA_IOADDR_RID, ctlr->io);
	bus_release_resource(dev, SYS_RES_IOPORT, ATA_ALTADDR_RID, ctlr->altio);
	return ENOMEM;
    }

    rid = ATA_IRQ_RID;
    if (!(ctlr->irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
					     RF_ACTIVE | RF_SHAREABLE))) {
	device_printf(dev, "unable to alloc interrupt\n");
	bus_release_resource(dev, SYS_RES_IOPORT, ATA_IOADDR_RID, ctlr->io);
	bus_release_resource(dev, SYS_RES_IOPORT, ATA_ALTADDR_RID, ctlr->altio);
	bus_release_resource(dev, SYS_RES_IOPORT, 
			     ATA_PC98_BANKADDR_RID, ctlr->bankio);
	return ENXIO;
    }

    if ((bus_setup_intr(dev, ctlr->irq, ATA_INTR_FLAGS,
			ata_cbus_intr, ctlr, &ctlr->ih))) {
	device_printf(dev, "unable to setup interrupt\n");
	bus_release_resource(dev, SYS_RES_IOPORT, ATA_IOADDR_RID, ctlr->io);
	bus_release_resource(dev, SYS_RES_IOPORT, ATA_ALTADDR_RID, ctlr->altio);
	bus_release_resource(dev, SYS_RES_IOPORT, 
			     ATA_PC98_BANKADDR_RID, ctlr->bankio);
	bus_release_resource(dev, SYS_RES_IOPORT, ATA_IRQ_RID, ctlr->irq);
	return ENXIO;
    }

    mtx_init(&ctlr->bank_mtx, "ATA cbus bank lock", NULL, MTX_DEF);
    ctlr->current_bank = -1;
    ctlr->restart_bank = -1;
    ctlr->locking = ata_cbus_banking;
    ctlr->setmode = ata_cbus_setmode;;

    if (!device_add_child(dev, "ata", 0))
	return ENOMEM;
    if (!device_add_child(dev, "ata", 1))
	return ENOMEM;

    return bus_generic_attach(dev);
}

static struct resource *
ata_cbus_alloc_resource(device_t dev, device_t child, int type, int *rid,
			u_long start, u_long end, u_long count, u_int flags)
{
    struct ata_cbus_controller *ctlr = device_get_softc(dev);

    if (type == SYS_RES_IOPORT) {
	switch (*rid) {
	case ATA_IOADDR_RID:
	    return ctlr->io;
	case ATA_ALTADDR_RID:
	    return ctlr->altio;
	}
    }
    if (type == SYS_RES_IRQ)
	return ctlr->irq;
    return 0;
}

static int
ata_cbus_setup_intr(device_t dev, device_t child, struct resource *irq,
	       int flags, driver_intr_t *intr, void *arg,
	       void **cookiep)
{
    struct ata_cbus_controller *controller = device_get_softc(dev);
    int unit = ((struct ata_channel *)device_get_softc(child))->unit;

    controller->interrupt[unit].function = intr;
    controller->interrupt[unit].argument = arg;
    *cookiep = controller;

    return 0;
}

static int
ata_cbus_print_child(device_t dev, device_t child)
{
    struct ata_channel *ch = device_get_softc(child);
    int retval = 0;

    retval += bus_print_child_header(dev, child);
    retval += printf(" at bank %d", ch->unit);
    retval += bus_print_child_footer(dev, child);
    return retval;
}

static void
ata_cbus_intr(void *data)
{  
    struct ata_cbus_controller *ctlr = data;
    struct ata_channel *ch;
    int unit;

    for (unit = 0; unit < 2; unit++) {
        if (!(ch = ctlr->interrupt[unit].argument))
            continue;
        if (ch->locking(ch, ATA_LF_WHICH) == unit)
	    ctlr->interrupt[unit].function(ch);
    }
}

static int
ata_cbus_banking(struct ata_channel *ch, int flags)
{
    struct ata_cbus_controller *ctlr =
	device_get_softc(device_get_parent(ch->dev));
    int res;

    mtx_lock(&ctlr->bank_mtx);
    switch (flags) {
    case ATA_LF_LOCK:
	if (ctlr->current_bank == -1)
	    ctlr->current_bank = ch->unit;
	if (ctlr->current_bank == ch->unit)
	    ATA_OUTB(ctlr->bankio, 0, ch->unit);
	else
	    ctlr->restart_bank = ch->unit;
	break;

    case ATA_LF_UNLOCK:
	if (ctlr->current_bank == ch->unit) {
	    ctlr->current_bank = -1;
	    if (ctlr->restart_bank != -1) {
		if (ctlr->interrupt[ctlr->restart_bank].argument) {
    		    mtx_unlock(&ctlr->bank_mtx);
		    ata_start(ctlr->interrupt[ctlr->restart_bank].argument);
		    mtx_lock(&ctlr->bank_mtx);
		}
		ctlr->restart_bank = -1;
	    }
	}
	break;

    case ATA_LF_WHICH:
	break;
    }
    res = ctlr->current_bank;
    mtx_unlock(&ctlr->bank_mtx);
    return res;
}

static void
ata_cbus_setmode(struct ata_device *atadev, int mode)
{
    atadev->mode = ata_limit_mode(atadev, mode, ATA_PIO_MAX);
}

static device_method_t ata_cbus_methods[] = {
    /* device_interface */
    DEVMETHOD(device_probe,	ata_cbus_probe),
    DEVMETHOD(device_attach,	ata_cbus_attach),

    /* bus methods */
    DEVMETHOD(bus_alloc_resource,	ata_cbus_alloc_resource),
    DEVMETHOD(bus_setup_intr,		ata_cbus_setup_intr),
    DEVMETHOD(bus_print_child,		ata_cbus_print_child),
    { 0, 0 }
};

static driver_t ata_cbus_driver = {
    "atacbus",
    ata_cbus_methods,
    sizeof(struct ata_cbus_controller),
};

static devclass_t ata_cbus_devclass;

DRIVER_MODULE(atacbus, isa, ata_cbus_driver, ata_cbus_devclass, 0, 0);

static int
ata_cbussub_probe(device_t dev)
{
    struct ata_cbus_controller *ctlr = device_get_softc(device_get_parent(dev));
    struct ata_channel *ch = device_get_softc(dev);
    device_t *children;
    int count, i;

    /* find channel number on this controller */
    device_get_children(device_get_parent(dev), &children, &count);
    for (i = 0; i < count; i++) {
	if (children[i] == dev) 
	    ch->unit = i;
    }
    free(children, M_TEMP);

    /* setup the resource vectors */
    for (i = ATA_DATA; i <= ATA_STATUS; i ++) {
	ch->r_io[i].res = ctlr->io;
	ch->r_io[i].offset = i << 1;
    }
    ch->r_io[ATA_ALTSTAT].res = ctlr->altio;
    ch->r_io[ATA_ALTSTAT].offset = 0;

    /* initialize softc for this channel */
    ch->flags |= ATA_USE_16BIT | ATA_USE_PC98GEOM;
    ch->locking = ctlr->locking;
    ch->device[MASTER].setmode = ctlr->setmode;
    ch->device[SLAVE].setmode = ctlr->setmode;
    ata_generic_hw(ch);
    return ata_probe(dev);
}

static device_method_t ata_cbussub_methods[] = {
    /* device interface */
    DEVMETHOD(device_probe,	ata_cbussub_probe),
    DEVMETHOD(device_attach,	ata_attach),
    DEVMETHOD(device_detach,	ata_detach),
    DEVMETHOD(device_resume,	ata_resume),
    { 0, 0 }
};

static driver_t ata_cbussub_driver = {
    "ata",
    ata_cbussub_methods,
    sizeof(struct ata_channel),
};

DRIVER_MODULE(ata, atacbus, ata_cbussub_driver, ata_devclass, 0, 0);