FreeBSD-5.3/sys/dev/rc/rcreg.h

/*
 * Copyright (C) 1995 by Pavel Antonov, Moscow, Russia.
 * Copyright (C) 1995 by Andrey A. Chernov, Moscow, Russia.
 * Copyright (C) 2002 by John Baldwin <jhb@FreeBSD.org>
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * $FreeBSD: src/sys/dev/rc/rcreg.h,v 1.5 2002/10/23 15:53:09 jhb Exp $
 */

/*
 * Cirrus Logic CD180 -based RISCom/8 board definitions
 */

/* Oscillator frequency - 19660.08Mhz / 2 */
#define RC_OSCFREQ      9830400

#define RC_BRD(s) ((s) == 0 ? 0 : \
	(((RC_OSCFREQ + (s) / 2) / (s)) + CD180_CTICKS/2) / CD180_CTICKS)

/* Riscom/8 board ISA I/O mapping */
#define RC_IOMAP(r)     ((((r) & 07) << 1) | (((r) & ~07) << 7))

/* I/O commands */
#define RC_OUT(sc, addr, value)						\
	bus_space_write_1((sc)->sc_bt, (sc)->sc_bh, RC_IOMAP(addr), (value))
#define RC_IN(sc, addr)						\
	bus_space_read_1((sc)->sc_bt, (sc)->sc_bh, RC_IOMAP(addr))

/* Riscom on-board registers (mapping assumed) */
#define RC_RIREG        0x100   /* Ring Indicator Register (read-only)  */
#define RC_DTREG        0x100   /* DTR Register (write-only)            */
#define RC_BSR          0x101   /* Board Status Register (read-only)    */
#define RC_CTOUT        0x101   /* Clear Timeout (write-only)           */

/* Board Status Register */
#define RC_BSR_TOUT     0x08    /* Timeout                              */
#define RC_BSR_RXINT    0x04    /* Receiver Interrupt                   */
#define RC_BSR_TXINT    0x02    /* Transmitter Interrupt                */
#define RC_BSR_MOINT    0x01    /* Modem Control Interrupt              */

/* Interrupt groups */
#define RC_MODEMGRP     0x01    /* Modem interrupt group                */
#define RC_RXGRP        0x02    /* Receiver interrupt group             */
#define RC_TXGRP        0x04    /* Transmitter interrupt group          */

/* Priority Interrupt Level definitions */
#define RC_PILR_MODEM   (0x80 | RC_MODEMGRP)
#define RC_PILR_RX      (0x80 | RC_RXGRP   )
#define RC_PILR_TX      (0x80 | RC_TXGRP   )