FreeBSD-5.3/sys/dev/rp/rp.c
/*
* Copyright (c) Comtrol Corporation <support@comtrol.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted prodived that the follwoing conditions
* are met.
* 1. Redistributions of source code must retain the above copyright
* notive, this list of conditions and the following disclainer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials prodided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Comtrol Corporation.
* 4. The name of Comtrol Corporation may not be used to endorse or
* promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY COMTROL CORPORATION ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL COMTROL CORPORATION BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, LIFE OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD: src/sys/dev/rp/rp.c,v 1.64 2004/07/15 20:47:38 phk Exp $");
/*
* rp.c - for RocketPort FreeBSD
*/
#include "opt_compat.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/fcntl.h>
#include <sys/malloc.h>
#include <sys/tty.h>
#include <sys/conf.h>
#include <sys/kernel.h>
#include <machine/resource.h>
#include <machine/bus.h>
#include <sys/bus.h>
#include <sys/rman.h>
#define ROCKET_C
#include <dev/rp/rpreg.h>
#include <dev/rp/rpvar.h>
static const char RocketPortVersion[] = "3.02";
static Byte_t RData[RDATASIZE] =
{
0x00, 0x09, 0xf6, 0x82,
0x02, 0x09, 0x86, 0xfb,
0x04, 0x09, 0x00, 0x0a,
0x06, 0x09, 0x01, 0x0a,
0x08, 0x09, 0x8a, 0x13,
0x0a, 0x09, 0xc5, 0x11,
0x0c, 0x09, 0x86, 0x85,
0x0e, 0x09, 0x20, 0x0a,
0x10, 0x09, 0x21, 0x0a,
0x12, 0x09, 0x41, 0xff,
0x14, 0x09, 0x82, 0x00,
0x16, 0x09, 0x82, 0x7b,
0x18, 0x09, 0x8a, 0x7d,
0x1a, 0x09, 0x88, 0x81,
0x1c, 0x09, 0x86, 0x7a,
0x1e, 0x09, 0x84, 0x81,
0x20, 0x09, 0x82, 0x7c,
0x22, 0x09, 0x0a, 0x0a
};
static Byte_t RRegData[RREGDATASIZE]=
{
0x00, 0x09, 0xf6, 0x82, /* 00: Stop Rx processor */
0x08, 0x09, 0x8a, 0x13, /* 04: Tx software flow control */
0x0a, 0x09, 0xc5, 0x11, /* 08: XON char */
0x0c, 0x09, 0x86, 0x85, /* 0c: XANY */
0x12, 0x09, 0x41, 0xff, /* 10: Rx mask char */
0x14, 0x09, 0x82, 0x00, /* 14: Compare/Ignore #0 */
0x16, 0x09, 0x82, 0x7b, /* 18: Compare #1 */
0x18, 0x09, 0x8a, 0x7d, /* 1c: Compare #2 */
0x1a, 0x09, 0x88, 0x81, /* 20: Interrupt #1 */
0x1c, 0x09, 0x86, 0x7a, /* 24: Ignore/Replace #1 */
0x1e, 0x09, 0x84, 0x81, /* 28: Interrupt #2 */
0x20, 0x09, 0x82, 0x7c, /* 2c: Ignore/Replace #2 */
0x22, 0x09, 0x0a, 0x0a /* 30: Rx FIFO Enable */
};
#if 0
/* IRQ number to MUDBAC register 2 mapping */
Byte_t sIRQMap[16] =
{
0,0,0,0x10,0x20,0x30,0,0,0,0x40,0x50,0x60,0x70,0,0,0x80
};
#endif
Byte_t rp_sBitMapClrTbl[8] =
{
0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f
};
Byte_t rp_sBitMapSetTbl[8] =
{
0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80
};
/* Actually not used */
#if notdef
struct termios deftermios = {
TTYDEF_IFLAG,
TTYDEF_OFLAG,
TTYDEF_CFLAG,
TTYDEF_LFLAG,
{ CEOF, CEOL, CEOL, CERASE, CWERASE, CKILL, CREPRINT,
_POSIX_VDISABLE, CINTR, CQUIT, CSUSP, CDSUSP, CSTART, CSTOP, CLNEXT,
CDISCARD, CMIN, CTIME, CSTATUS, _POSIX_VDISABLE },
TTYDEF_SPEED,
TTYDEF_SPEED
};
#endif
/***************************************************************************
Function: sReadAiopID
Purpose: Read the AIOP idenfication number directly from an AIOP.
Call: sReadAiopID(CtlP, aiop)
CONTROLLER_T *CtlP; Ptr to controller structure
int aiop: AIOP index
Return: int: Flag AIOPID_XXXX if a valid AIOP is found, where X
is replace by an identifying number.
Flag AIOPID_NULL if no valid AIOP is found
Warnings: No context switches are allowed while executing this function.
*/
int sReadAiopID(CONTROLLER_T *CtlP, int aiop)
{
Byte_t AiopID; /* ID byte from AIOP */
rp_writeaiop1(CtlP, aiop, _CMD_REG, RESET_ALL); /* reset AIOP */
rp_writeaiop1(CtlP, aiop, _CMD_REG, 0x0);
AiopID = rp_readaiop1(CtlP, aiop, _CHN_STAT0) & 0x07;
if(AiopID == 0x06)
return(1);
else /* AIOP does not exist */
return(-1);
}
/***************************************************************************
Function: sReadAiopNumChan
Purpose: Read the number of channels available in an AIOP directly from
an AIOP.
Call: sReadAiopNumChan(CtlP, aiop)
CONTROLLER_T *CtlP; Ptr to controller structure
int aiop: AIOP index
Return: int: The number of channels available
Comments: The number of channels is determined by write/reads from identical
offsets within the SRAM address spaces for channels 0 and 4.
If the channel 4 space is mirrored to channel 0 it is a 4 channel
AIOP, otherwise it is an 8 channel.
Warnings: No context switches are allowed while executing this function.
*/
int sReadAiopNumChan(CONTROLLER_T *CtlP, int aiop)
{
Word_t x, y;
rp_writeaiop4(CtlP, aiop, _INDX_ADDR,0x12340000L); /* write to chan 0 SRAM */
rp_writeaiop2(CtlP, aiop, _INDX_ADDR,0); /* read from SRAM, chan 0 */
x = rp_readaiop2(CtlP, aiop, _INDX_DATA);
rp_writeaiop2(CtlP, aiop, _INDX_ADDR,0x4000); /* read from SRAM, chan 4 */
y = rp_readaiop2(CtlP, aiop, _INDX_DATA);
if(x != y) /* if different must be 8 chan */
return(8);
else
return(4);
}
/***************************************************************************
Function: sInitChan
Purpose: Initialization of a channel and channel structure
Call: sInitChan(CtlP,ChP,AiopNum,ChanNum)
CONTROLLER_T *CtlP; Ptr to controller structure
CHANNEL_T *ChP; Ptr to channel structure
int AiopNum; AIOP number within controller
int ChanNum; Channel number within AIOP
Return: int: TRUE if initialization succeeded, FALSE if it fails because channel
number exceeds number of channels available in AIOP.
Comments: This function must be called before a channel can be used.
Warnings: No range checking on any of the parameters is done.
No context switches are allowed while executing this function.
*/
int sInitChan( CONTROLLER_T *CtlP,
CHANNEL_T *ChP,
int AiopNum,
int ChanNum)
{
int i, ChOff;
Byte_t *ChR;
static Byte_t R[4];
if(ChanNum >= CtlP->AiopNumChan[AiopNum])
return(FALSE); /* exceeds num chans in AIOP */
/* Channel, AIOP, and controller identifiers */
ChP->CtlP = CtlP;
ChP->ChanID = CtlP->AiopID[AiopNum];
ChP->AiopNum = AiopNum;
ChP->ChanNum = ChanNum;
/* Initialize the channel from the RData array */
for(i=0; i < RDATASIZE; i+=4)
{
R[0] = RData[i];
R[1] = RData[i+1] + 0x10 * ChanNum;
R[2] = RData[i+2];
R[3] = RData[i+3];
rp_writech4(ChP,_INDX_ADDR,*((DWord_t *)&R[0]));
}
ChR = ChP->R;
for(i=0; i < RREGDATASIZE; i+=4)
{
ChR[i] = RRegData[i];
ChR[i+1] = RRegData[i+1] + 0x10 * ChanNum;
ChR[i+2] = RRegData[i+2];
ChR[i+3] = RRegData[i+3];
}
/* Indexed registers */
ChOff = (Word_t)ChanNum * 0x1000;
ChP->BaudDiv[0] = (Byte_t)(ChOff + _BAUD);
ChP->BaudDiv[1] = (Byte_t)((ChOff + _BAUD) >> 8);
ChP->BaudDiv[2] = (Byte_t)BRD9600;
ChP->BaudDiv[3] = (Byte_t)(BRD9600 >> 8);
rp_writech4(ChP,_INDX_ADDR,*(DWord_t *)&ChP->BaudDiv[0]);
ChP->TxControl[0] = (Byte_t)(ChOff + _TX_CTRL);
ChP->TxControl[1] = (Byte_t)((ChOff + _TX_CTRL) >> 8);
ChP->TxControl[2] = 0;
ChP->TxControl[3] = 0;
rp_writech4(ChP,_INDX_ADDR,*(DWord_t *)&ChP->TxControl[0]);
ChP->RxControl[0] = (Byte_t)(ChOff + _RX_CTRL);
ChP->RxControl[1] = (Byte_t)((ChOff + _RX_CTRL) >> 8);
ChP->RxControl[2] = 0;
ChP->RxControl[3] = 0;
rp_writech4(ChP,_INDX_ADDR,*(DWord_t *)&ChP->RxControl[0]);
ChP->TxEnables[0] = (Byte_t)(ChOff + _TX_ENBLS);
ChP->TxEnables[1] = (Byte_t)((ChOff + _TX_ENBLS) >> 8);
ChP->TxEnables[2] = 0;
ChP->TxEnables[3] = 0;
rp_writech4(ChP,_INDX_ADDR,*(DWord_t *)&ChP->TxEnables[0]);
ChP->TxCompare[0] = (Byte_t)(ChOff + _TXCMP1);
ChP->TxCompare[1] = (Byte_t)((ChOff + _TXCMP1) >> 8);
ChP->TxCompare[2] = 0;
ChP->TxCompare[3] = 0;
rp_writech4(ChP,_INDX_ADDR,*(DWord_t *)&ChP->TxCompare[0]);
ChP->TxReplace1[0] = (Byte_t)(ChOff + _TXREP1B1);
ChP->TxReplace1[1] = (Byte_t)((ChOff + _TXREP1B1) >> 8);
ChP->TxReplace1[2] = 0;
ChP->TxReplace1[3] = 0;
rp_writech4(ChP,_INDX_ADDR,*(DWord_t *)&ChP->TxReplace1[0]);
ChP->TxReplace2[0] = (Byte_t)(ChOff + _TXREP2);
ChP->TxReplace2[1] = (Byte_t)((ChOff + _TXREP2) >> 8);
ChP->TxReplace2[2] = 0;
ChP->TxReplace2[3] = 0;
rp_writech4(ChP,_INDX_ADDR,*(DWord_t *)&ChP->TxReplace2[0]);
ChP->TxFIFOPtrs = ChOff + _TXF_OUTP;
ChP->TxFIFO = ChOff + _TX_FIFO;
rp_writech1(ChP,_CMD_REG,(Byte_t)ChanNum | RESTXFCNT); /* apply reset Tx FIFO count */
rp_writech1(ChP,_CMD_REG,(Byte_t)ChanNum); /* remove reset Tx FIFO count */
rp_writech2(ChP,_INDX_ADDR,ChP->TxFIFOPtrs); /* clear Tx in/out ptrs */
rp_writech2(ChP,_INDX_DATA,0);
ChP->RxFIFOPtrs = ChOff + _RXF_OUTP;
ChP->RxFIFO = ChOff + _RX_FIFO;
rp_writech1(ChP,_CMD_REG,(Byte_t)ChanNum | RESRXFCNT); /* apply reset Rx FIFO count */
rp_writech1(ChP,_CMD_REG,(Byte_t)ChanNum); /* remove reset Rx FIFO count */
rp_writech2(ChP,_INDX_ADDR,ChP->RxFIFOPtrs); /* clear Rx out ptr */
rp_writech2(ChP,_INDX_DATA,0);
rp_writech2(ChP,_INDX_ADDR,ChP->RxFIFOPtrs + 2); /* clear Rx in ptr */
rp_writech2(ChP,_INDX_DATA,0);
ChP->TxPrioCnt = ChOff + _TXP_CNT;
rp_writech2(ChP,_INDX_ADDR,ChP->TxPrioCnt);
rp_writech1(ChP,_INDX_DATA,0);
ChP->TxPrioPtr = ChOff + _TXP_PNTR;
rp_writech2(ChP,_INDX_ADDR,ChP->TxPrioPtr);
rp_writech1(ChP,_INDX_DATA,0);
ChP->TxPrioBuf = ChOff + _TXP_BUF;
sEnRxProcessor(ChP); /* start the Rx processor */
return(TRUE);
}
/***************************************************************************
Function: sStopRxProcessor
Purpose: Stop the receive processor from processing a channel.
Call: sStopRxProcessor(ChP)
CHANNEL_T *ChP; Ptr to channel structure
Comments: The receive processor can be started again with sStartRxProcessor().
This function causes the receive processor to skip over the
stopped channel. It does not stop it from processing other channels.
Warnings: No context switches are allowed while executing this function.
Do not leave the receive processor stopped for more than one
character time.
After calling this function a delay of 4 uS is required to ensure
that the receive processor is no longer processing this channel.
*/
void sStopRxProcessor(CHANNEL_T *ChP)
{
Byte_t R[4];
R[0] = ChP->R[0];
R[1] = ChP->R[1];
R[2] = 0x0a;
R[3] = ChP->R[3];
rp_writech4(ChP, _INDX_ADDR,*(DWord_t *)&R[0]);
}
/***************************************************************************
Function: sFlushRxFIFO
Purpose: Flush the Rx FIFO
Call: sFlushRxFIFO(ChP)
CHANNEL_T *ChP; Ptr to channel structure
Return: void
Comments: To prevent data from being enqueued or dequeued in the Tx FIFO
while it is being flushed the receive processor is stopped
and the transmitter is disabled. After these operations a
4 uS delay is done before clearing the pointers to allow
the receive processor to stop. These items are handled inside
this function.
Warnings: No context switches are allowed while executing this function.
*/
void sFlushRxFIFO(CHANNEL_T *ChP)
{
int i;
Byte_t Ch; /* channel number within AIOP */
int RxFIFOEnabled; /* TRUE if Rx FIFO enabled */
if(sGetRxCnt(ChP) == 0) /* Rx FIFO empty */
return; /* don't need to flush */
RxFIFOEnabled = FALSE;
if(ChP->R[0x32] == 0x08) /* Rx FIFO is enabled */
{
RxFIFOEnabled = TRUE;
sDisRxFIFO(ChP); /* disable it */
for(i=0; i < 2000/200; i++) /* delay 2 uS to allow proc to disable FIFO*/
rp_readch1(ChP,_INT_CHAN); /* depends on bus i/o timing */
}
sGetChanStatus(ChP); /* clear any pending Rx errors in chan stat */
Ch = (Byte_t)sGetChanNum(ChP);
rp_writech1(ChP,_CMD_REG,Ch | RESRXFCNT); /* apply reset Rx FIFO count */
rp_writech1(ChP,_CMD_REG,Ch); /* remove reset Rx FIFO count */
rp_writech2(ChP,_INDX_ADDR,ChP->RxFIFOPtrs); /* clear Rx out ptr */
rp_writech2(ChP,_INDX_DATA,0);
rp_writech2(ChP,_INDX_ADDR,ChP->RxFIFOPtrs + 2); /* clear Rx in ptr */
rp_writech2(ChP,_INDX_DATA,0);
if(RxFIFOEnabled)
sEnRxFIFO(ChP); /* enable Rx FIFO */
}
/***************************************************************************
Function: sFlushTxFIFO
Purpose: Flush the Tx FIFO
Call: sFlushTxFIFO(ChP)
CHANNEL_T *ChP; Ptr to channel structure
Return: void
Comments: To prevent data from being enqueued or dequeued in the Tx FIFO
while it is being flushed the receive processor is stopped
and the transmitter is disabled. After these operations a
4 uS delay is done before clearing the pointers to allow
the receive processor to stop. These items are handled inside
this function.
Warnings: No context switches are allowed while executing this function.
*/
void sFlushTxFIFO(CHANNEL_T *ChP)
{
int i;
Byte_t Ch; /* channel number within AIOP */
int TxEnabled; /* TRUE if transmitter enabled */
if(sGetTxCnt(ChP) == 0) /* Tx FIFO empty */
return; /* don't need to flush */
TxEnabled = FALSE;
if(ChP->TxControl[3] & TX_ENABLE)
{
TxEnabled = TRUE;
sDisTransmit(ChP); /* disable transmitter */
}
sStopRxProcessor(ChP); /* stop Rx processor */
for(i = 0; i < 4000/200; i++) /* delay 4 uS to allow proc to stop */
rp_readch1(ChP,_INT_CHAN); /* depends on bus i/o timing */
Ch = (Byte_t)sGetChanNum(ChP);
rp_writech1(ChP,_CMD_REG,Ch | RESTXFCNT); /* apply reset Tx FIFO count */
rp_writech1(ChP,_CMD_REG,Ch); /* remove reset Tx FIFO count */
rp_writech2(ChP,_INDX_ADDR,ChP->TxFIFOPtrs); /* clear Tx in/out ptrs */
rp_writech2(ChP,_INDX_DATA,0);
if(TxEnabled)
sEnTransmit(ChP); /* enable transmitter */
sStartRxProcessor(ChP); /* restart Rx processor */
}
/***************************************************************************
Function: sWriteTxPrioByte
Purpose: Write a byte of priority transmit data to a channel
Call: sWriteTxPrioByte(ChP,Data)
CHANNEL_T *ChP; Ptr to channel structure
Byte_t Data; The transmit data byte
Return: int: 1 if the bytes is successfully written, otherwise 0.
Comments: The priority byte is transmitted before any data in the Tx FIFO.
Warnings: No context switches are allowed while executing this function.
*/
int sWriteTxPrioByte(CHANNEL_T *ChP, Byte_t Data)
{
Byte_t DWBuf[4]; /* buffer for double word writes */
Word_t *WordPtr; /* must be far because Win SS != DS */
if(sGetTxCnt(ChP) > 1) /* write it to Tx priority buffer */
{
rp_writech2(ChP,_INDX_ADDR,ChP->TxPrioCnt); /* get priority buffer status */
if(rp_readch1(ChP,_INDX_DATA) & PRI_PEND) /* priority buffer busy */
return(0); /* nothing sent */
WordPtr = (Word_t *)(&DWBuf[0]);
*WordPtr = ChP->TxPrioBuf; /* data byte address */
DWBuf[2] = Data; /* data byte value */
rp_writech4(ChP,_INDX_ADDR,*((DWord_t *)(&DWBuf[0]))); /* write it out */
*WordPtr = ChP->TxPrioCnt; /* Tx priority count address */
DWBuf[2] = PRI_PEND + 1; /* indicate 1 byte pending */
DWBuf[3] = 0; /* priority buffer pointer */
rp_writech4(ChP,_INDX_ADDR,*((DWord_t *)(&DWBuf[0]))); /* write it out */
}
else /* write it to Tx FIFO */
{
sWriteTxByte(ChP,sGetTxRxDataIO(ChP),Data);
}
return(1); /* 1 byte sent */
}
/***************************************************************************
Function: sEnInterrupts
Purpose: Enable one or more interrupts for a channel
Call: sEnInterrupts(ChP,Flags)
CHANNEL_T *ChP; Ptr to channel structure
Word_t Flags: Interrupt enable flags, can be any combination
of the following flags:
TXINT_EN: Interrupt on Tx FIFO empty
RXINT_EN: Interrupt on Rx FIFO at trigger level (see
sSetRxTrigger())
SRCINT_EN: Interrupt on SRC (Special Rx Condition)
MCINT_EN: Interrupt on modem input change
CHANINT_EN: Allow channel interrupt signal to the AIOP's
Interrupt Channel Register.
Return: void
Comments: If an interrupt enable flag is set in Flags, that interrupt will be
enabled. If an interrupt enable flag is not set in Flags, that
interrupt will not be changed. Interrupts can be disabled with
function sDisInterrupts().
This function sets the appropriate bit for the channel in the AIOP's
Interrupt Mask Register if the CHANINT_EN flag is set. This allows
this channel's bit to be set in the AIOP's Interrupt Channel Register.
Interrupts must also be globally enabled before channel interrupts
will be passed on to the host. This is done with function
sEnGlobalInt().
In some cases it may be desirable to disable interrupts globally but
enable channel interrupts. This would allow the global interrupt
status register to be used to determine which AIOPs need service.
*/
void sEnInterrupts(CHANNEL_T *ChP,Word_t Flags)
{
Byte_t Mask; /* Interrupt Mask Register */
ChP->RxControl[2] |=
((Byte_t)Flags & (RXINT_EN | SRCINT_EN | MCINT_EN));
rp_writech4(ChP,_INDX_ADDR,*(DWord_t *)&ChP->RxControl[0]);
ChP->TxControl[2] |= ((Byte_t)Flags & TXINT_EN);
rp_writech4(ChP,_INDX_ADDR,*(DWord_t *)&ChP->TxControl[0]);
if(Flags & CHANINT_EN)
{
Mask = rp_readch1(ChP,_INT_MASK) | rp_sBitMapSetTbl[ChP->ChanNum];
rp_writech1(ChP,_INT_MASK,Mask);
}
}
/***************************************************************************
Function: sDisInterrupts
Purpose: Disable one or more interrupts for a channel
Call: sDisInterrupts(ChP,Flags)
CHANNEL_T *ChP; Ptr to channel structure
Word_t Flags: Interrupt flags, can be any combination
of the following flags:
TXINT_EN: Interrupt on Tx FIFO empty
RXINT_EN: Interrupt on Rx FIFO at trigger level (see
sSetRxTrigger())
SRCINT_EN: Interrupt on SRC (Special Rx Condition)
MCINT_EN: Interrupt on modem input change
CHANINT_EN: Disable channel interrupt signal to the
AIOP's Interrupt Channel Register.
Return: void
Comments: If an interrupt flag is set in Flags, that interrupt will be
disabled. If an interrupt flag is not set in Flags, that
interrupt will not be changed. Interrupts can be enabled with
function sEnInterrupts().
This function clears the appropriate bit for the channel in the AIOP's
Interrupt Mask Register if the CHANINT_EN flag is set. This blocks
this channel's bit from being set in the AIOP's Interrupt Channel
Register.
*/
void sDisInterrupts(CHANNEL_T *ChP,Word_t Flags)
{
Byte_t Mask; /* Interrupt Mask Register */
ChP->RxControl[2] &=
~((Byte_t)Flags & (RXINT_EN | SRCINT_EN | MCINT_EN));
rp_writech4(ChP,_INDX_ADDR,*(DWord_t *)&ChP->RxControl[0]);
ChP->TxControl[2] &= ~((Byte_t)Flags & TXINT_EN);
rp_writech4(ChP,_INDX_ADDR,*(DWord_t *)&ChP->TxControl[0]);
if(Flags & CHANINT_EN)
{
Mask = rp_readch1(ChP,_INT_MASK) & rp_sBitMapClrTbl[ChP->ChanNum];
rp_writech1(ChP,_INT_MASK,Mask);
}
}
/*********************************************************************
Begin FreeBsd-specific driver code
**********************************************************************/
static timeout_t rpdtrwakeup;
struct callout_handle rp_callout_handle;
static d_open_t rpopen;
static d_close_t rpclose;
static d_write_t rpwrite;
static d_ioctl_t rpioctl;
struct cdevsw rp_cdevsw = {
.d_version = D_VERSION,
.d_open = rpopen,
.d_close = rpclose,
.d_write = rpwrite,
.d_ioctl = rpioctl,
.d_name = "rp",
.d_flags = D_TTY | D_NEEDGIANT,
};
static int rp_num_ports_open = 0;
static int rp_ndevs = 0;
static int minor_to_unit[128];
static int rp_num_ports[4]; /* Number of ports on each controller */
#define POLL_INTERVAL 1
#define CALLOUT_MASK 0x80
#define CONTROL_MASK 0x60
#define CONTROL_INIT_STATE 0x20
#define CONTROL_LOCK_STATE 0x40
#define DEV_UNIT(dev) (MINOR_TO_UNIT(minor(dev))
#define MINOR_MAGIC_MASK (CALLOUT_MASK | CONTROL_MASK)
#define MINOR_MAGIC(dev) ((minor(dev)) & ~MINOR_MAGIC_MASK)
#define IS_CALLOUT(dev) (minor(dev) & CALLOUT_MASK)
#define IS_CONTROL(dev) (minor(dev) & CONTROL_MASK)
#define RP_ISMULTIPORT(dev) ((dev)->id_flags & 0x1)
#define RP_MPMASTER(dev) (((dev)->id_flags >> 8) & 0xff)
#define RP_NOTAST4(dev) ((dev)->id_flags & 0x04)
static struct rp_port *p_rp_addr[4];
static struct rp_port *p_rp_table[MAX_RP_PORTS];
#define rp_addr(unit) (p_rp_addr[unit])
#define rp_table(port) (p_rp_table[port])
/*
* The top-level routines begin here
*/
static int rpparam(struct tty *, struct termios *);
static void rpstart(struct tty *);
static void rpstop(struct tty *, int);
static void rphardclose (struct rp_port *);
static void rp_do_receive(struct rp_port *rp, struct tty *tp,
CHANNEL_t *cp, unsigned int ChanStatus)
{
int spl;
unsigned int CharNStat;
int ToRecv, wRecv, ch, ttynocopy;
ToRecv = sGetRxCnt(cp);
if(ToRecv == 0)
return;
/* If status indicates there are errored characters in the
FIFO, then enter status mode (a word in FIFO holds
characters and status)
*/
if(ChanStatus & (RXFOVERFL | RXBREAK | RXFRAME | RXPARITY)) {
if(!(ChanStatus & STATMODE)) {
ChanStatus |= STATMODE;
sEnRxStatusMode(cp);
}
}
/*
if we previously entered status mode then read down the
FIFO one word at a time, pulling apart the character and
the status. Update error counters depending on status.
*/
if(ChanStatus & STATMODE) {
while(ToRecv) {
if(tp->t_state & TS_TBLOCK) {
break;
}
CharNStat = rp_readch2(cp,sGetTxRxDataIO(cp));
ch = CharNStat & 0xff;
if((CharNStat & STMBREAK) || (CharNStat & STMFRAMEH))
ch |= TTY_FE;
else if (CharNStat & STMPARITYH)
ch |= TTY_PE;
else if (CharNStat & STMRCVROVRH)
rp->rp_overflows++;
ttyld_rint(tp, ch);
ToRecv--;
}
/*
After emtying FIFO in status mode, turn off status mode
*/
if(sGetRxCnt(cp) == 0) {
sDisRxStatusMode(cp);
}
} else {
/*
* Avoid the grotesquely inefficient lineswitch routine
* (ttyinput) in "raw" mode. It usually takes about 450
* instructions (that's without canonical processing or echo!).
* slinput is reasonably fast (usually 40 instructions plus
* call overhead).
*/
ToRecv = sGetRxCnt(cp);
if ( tp->t_state & TS_CAN_BYPASS_L_RINT ) {
if ( ToRecv > RXFIFO_SIZE ) {
ToRecv = RXFIFO_SIZE;
}
wRecv = ToRecv >> 1;
if ( wRecv ) {
rp_readmultich2(cp,sGetTxRxDataIO(cp),(u_int16_t *)rp->RxBuf,wRecv);
}
if ( ToRecv & 1 ) {
((unsigned char *)rp->RxBuf)[(ToRecv-1)] = (u_char) rp_readch1(cp,sGetTxRxDataIO(cp));
}
tk_nin += ToRecv;
tk_rawcc += ToRecv;
tp->t_rawcc += ToRecv;
ttynocopy = b_to_q((char *)rp->RxBuf, ToRecv, &tp->t_rawq);
ttwakeup(tp);
} else {
while (ToRecv) {
if(tp->t_state & TS_TBLOCK) {
break;
}
ch = (u_char) rp_readch1(cp,sGetTxRxDataIO(cp));
spl = spltty();
ttyld_rint(tp, ch);
splx(spl);
ToRecv--;
}
}
}
}
static void rp_handle_port(struct rp_port *rp)
{
CHANNEL_t *cp;
struct tty *tp;
unsigned int IntMask, ChanStatus;
if(!rp)
return;
cp = &rp->rp_channel;
tp = rp->rp_tty;
IntMask = sGetChanIntID(cp);
IntMask = IntMask & rp->rp_intmask;
ChanStatus = sGetChanStatus(cp);
if(IntMask & RXF_TRIG)
if(!(tp->t_state & TS_TBLOCK) && (tp->t_state & TS_CARR_ON) && (tp->t_state & TS_ISOPEN)) {
rp_do_receive(rp, tp, cp, ChanStatus);
}
if(IntMask & DELTA_CD) {
if(ChanStatus & CD_ACT) {
if(!(tp->t_state & TS_CARR_ON) ) {
(void)ttyld_modem(tp, 1);
}
} else {
if((tp->t_state & TS_CARR_ON)) {
(void)ttyld_modem(tp, 0);
if(ttyld_modem(tp, 0) == 0) {
rphardclose(rp);
}
}
}
}
/* oldcts = rp->rp_cts;
rp->rp_cts = ((ChanStatus & CTS_ACT) != 0);
if(oldcts != rp->rp_cts) {
printf("CTS change (now %s)... on port %d\n", rp->rp_cts ? "on" : "off", rp->rp_port);
}
*/
}
static void rp_do_poll(void *not_used)
{
CONTROLLER_t *ctl;
struct rp_port *rp;
struct tty *tp;
int unit, aiop, ch, line, count;
unsigned char CtlMask, AiopMask;
for(unit = 0; unit < rp_ndevs; unit++) {
rp = rp_addr(unit);
ctl = rp->rp_ctlp;
CtlMask = ctl->ctlmask(ctl);
for(aiop=0; CtlMask; CtlMask >>=1, aiop++) {
if(CtlMask & 1) {
AiopMask = sGetAiopIntStatus(ctl, aiop);
for(ch = 0; AiopMask; AiopMask >>=1, ch++) {
if(AiopMask & 1) {
line = (unit << 5) | (aiop << 3) | ch;
rp = rp_table(line);
rp_handle_port(rp);
}
}
}
}
for(line = 0, rp = rp_addr(unit); line < rp_num_ports[unit];
line++, rp++) {
tp = rp->rp_tty;
if((tp->t_state & TS_BUSY) && (tp->t_state & TS_ISOPEN)) {
count = sGetTxCnt(&rp->rp_channel);
if(count == 0)
tp->t_state &= ~(TS_BUSY);
if(!(tp->t_state & TS_TTSTOP) &&
(count <= rp->rp_restart)) {
ttyld_start(tp);
}
}
}
}
if(rp_num_ports_open)
rp_callout_handle = timeout(rp_do_poll,
(void *)NULL, POLL_INTERVAL);
}
int
rp_attachcommon(CONTROLLER_T *ctlp, int num_aiops, int num_ports)
{
int oldspl, unit;
int num_chan;
int aiop, chan, port;
int ChanStatus, line, i, count;
int retval;
struct rp_port *rp;
struct cdev **dev_nodes;
unit = device_get_unit(ctlp->dev);
printf("RocketPort%d (Version %s) %d ports.\n", unit,
RocketPortVersion, num_ports);
rp_num_ports[unit] = num_ports;
callout_handle_init(&rp_callout_handle);
ctlp->rp = rp = (struct rp_port *)
malloc(sizeof(struct rp_port) * num_ports, M_TTYS, M_NOWAIT | M_ZERO);
if (rp == NULL) {
device_printf(ctlp->dev, "rp_attachcommon: Could not malloc rp_ports structures.\n");
retval = ENOMEM;
goto nogo;
}
count = unit * 32; /* board times max ports per card SG */
for(i=count;i < (count + rp_num_ports[unit]);i++)
minor_to_unit[i] = unit;
bzero(rp, sizeof(struct rp_port) * num_ports);
oldspl = spltty();
rp_addr(unit) = rp;
splx(oldspl);
dev_nodes = ctlp->dev_nodes = malloc(sizeof(*(ctlp->dev_nodes)) * rp_num_ports[unit] * 6, M_DEVBUF, M_NOWAIT | M_ZERO);
if(ctlp->dev_nodes == NULL) {
device_printf(ctlp->dev, "rp_attachcommon: Could not malloc device node structures.\n");
retval = ENOMEM;
goto nogo;
}
for (i = 0 ; i < rp_num_ports[unit] ; i++) {
*(dev_nodes++) = make_dev(&rp_cdevsw, ((unit + 1) << 16) | i,
UID_ROOT, GID_WHEEL, 0666, "ttyR%c",
i <= 9 ? '0' + i : 'a' + i - 10);
*(dev_nodes++) = make_dev(&rp_cdevsw, ((unit + 1) << 16) | i | 0x20,
UID_ROOT, GID_WHEEL, 0666, "ttyiR%c",
i <= 9 ? '0' + i : 'a' + i - 10);
*(dev_nodes++) = make_dev(&rp_cdevsw, ((unit + 1) << 16) | i | 0x40,
UID_ROOT, GID_WHEEL, 0666, "ttylR%c",
i <= 9 ? '0' + i : 'a' + i - 10);
*(dev_nodes++) = make_dev(&rp_cdevsw, ((unit + 1) << 16) | i | 0x80,
UID_ROOT, GID_WHEEL, 0666, "cuaR%c",
i <= 9 ? '0' + i : 'a' + i - 10);
*(dev_nodes++) = make_dev(&rp_cdevsw, ((unit + 1) << 16) | i | 0xa0,
UID_ROOT, GID_WHEEL, 0666, "cuaiR%c",
i <= 9 ? '0' + i : 'a' + i - 10);
*(dev_nodes++) = make_dev(&rp_cdevsw, ((unit + 1) << 16) | i | 0xc0,
UID_ROOT, GID_WHEEL, 0666, "cualR%c",
i <= 9 ? '0' + i : 'a' + i - 10);
}
port = 0;
for(aiop=0; aiop < num_aiops; aiop++) {
num_chan = sGetAiopNumChan(ctlp, aiop);
for(chan=0; chan < num_chan; chan++, port++, rp++) {
rp->rp_tty = ttymalloc(NULL);
rp->rp_port = port;
rp->rp_ctlp = ctlp;
rp->rp_unit = unit;
rp->rp_chan = chan;
rp->rp_aiop = aiop;
rp->rp_tty->t_line = 0;
/* tty->t_termios = deftermios;
*/
rp->it_in.c_iflag = 0;
rp->it_in.c_oflag = 0;
rp->it_in.c_cflag = TTYDEF_CFLAG;
rp->it_in.c_lflag = 0;
termioschars(&rp->it_in);
/* termioschars(&tty->t_termios);
*/
rp->it_in.c_ispeed = rp->it_in.c_ospeed = TTYDEF_SPEED;
rp->it_out = rp->it_in;
rp->rp_intmask = RXF_TRIG | TXFIFO_MT | SRC_INT |
DELTA_CD | DELTA_CTS | DELTA_DSR;
#if notdef
ChanStatus = sGetChanStatus(&rp->rp_channel);
#endif /* notdef */
if(sInitChan(ctlp, &rp->rp_channel, aiop, chan) == 0) {
device_printf(ctlp->dev, "RocketPort sInitChan(%d, %d, %d) failed.\n",
unit, aiop, chan);
retval = ENXIO;
goto nogo;
}
ChanStatus = sGetChanStatus(&rp->rp_channel);
rp->rp_cts = (ChanStatus & CTS_ACT) != 0;
line = (unit << 5) | (aiop << 3) | chan;
rp_table(line) = rp;
}
}
rp_ndevs++;
return (0);
nogo:
rp_releaseresource(ctlp);
return (retval);
}
void
rp_releaseresource(CONTROLLER_t *ctlp)
{
int i, s, unit;
struct rp_port *rp;
unit = device_get_unit(ctlp->dev);
if (rp_addr(unit) != NULL) {
for (i = 0; i < rp_num_ports[unit]; i++) {
rp = rp_addr(unit) + i;
s = ttyrel(rp->rp_tty);
if (s) {
printf("Detaching with active tty (%d refs)!\n", s);
}
}
}
if (ctlp->rp != NULL) {
s = spltty();
for (i = 0 ; i < sizeof(p_rp_addr) / sizeof(*p_rp_addr) ; i++)
if (p_rp_addr[i] == ctlp->rp)
p_rp_addr[i] = NULL;
for (i = 0 ; i < sizeof(p_rp_table) / sizeof(*p_rp_table) ; i++)
if (p_rp_table[i] == ctlp->rp)
p_rp_table[i] = NULL;
splx(s);
free(ctlp->rp, M_DEVBUF);
ctlp->rp = NULL;
}
if (ctlp->dev != NULL) {
for (i = 0 ; i < rp_num_ports[unit] * 6 ; i++)
destroy_dev(ctlp->dev_nodes[i]);
free(ctlp->dev_nodes, M_DEVBUF);
ctlp->dev = NULL;
}
}
void
rp_untimeout(void)
{
untimeout(rp_do_poll, (void *)NULL, rp_callout_handle);
}
static int
rpopen(dev, flag, mode, td)
struct cdev *dev;
int flag, mode;
struct thread *td;
{
struct rp_port *rp;
int unit, port, mynor, umynor, flags; /* SG */
struct tty *tp;
int oldspl, error;
unsigned int IntMask, ChanStatus;
umynor = (((minor(dev) >> 16) -1) * 32); /* SG */
port = (minor(dev) & 0x1f); /* SG */
mynor = (port + umynor); /* SG */
unit = minor_to_unit[mynor];
if (rp_addr(unit) == NULL)
return (ENXIO);
if(IS_CONTROL(dev))
return(0);
rp = rp_addr(unit) + port;
/* rp->rp_tty = &rp_tty[rp->rp_port];
*/
tp = rp->rp_tty;
dev->si_tty = tp;
oldspl = spltty();
open_top:
while(rp->state & ~SET_DTR) {
error = tsleep(&tp->t_dtr_wait, TTIPRI | PCATCH, "rpdtr", 0);
if(error != 0)
goto out;
}
if(tp->t_state & TS_ISOPEN) {
if(IS_CALLOUT(dev)) {
if(!rp->active_out) {
error = EBUSY;
goto out;
}
} else {
if(rp->active_out) {
if(flag & O_NONBLOCK) {
error = EBUSY;
goto out;
}
error = tsleep(&rp->active_out,
TTIPRI | PCATCH, "rpbi", 0);
if(error != 0)
goto out;
goto open_top;
}
}
if(tp->t_state & TS_XCLUDE && suser(td) != 0) {
splx(oldspl);
error = EBUSY;
goto out2;
}
}
else {
tp->t_dev = dev;
tp->t_param = rpparam;
tp->t_oproc = rpstart;
tp->t_stop = rpstop;
tp->t_line = 0;
tp->t_termios = IS_CALLOUT(dev) ? rp->it_out : rp->it_in;
tp->t_ififosize = 512;
tp->t_ispeedwat = (speed_t)-1;
tp->t_ospeedwat = (speed_t)-1;
flags = 0;
flags |= SET_RTS;
flags |= SET_DTR;
rp->rp_channel.TxControl[3] =
((rp->rp_channel.TxControl[3]
& ~(SET_RTS | SET_DTR)) | flags);
rp_writech4(&rp->rp_channel,_INDX_ADDR,
*(DWord_t *) &(rp->rp_channel.TxControl[0]));
sSetRxTrigger(&rp->rp_channel, TRIG_1);
sDisRxStatusMode(&rp->rp_channel);
sFlushRxFIFO(&rp->rp_channel);
sFlushTxFIFO(&rp->rp_channel);
sEnInterrupts(&rp->rp_channel,
(TXINT_EN|MCINT_EN|RXINT_EN|SRCINT_EN|CHANINT_EN));
sSetRxTrigger(&rp->rp_channel, TRIG_1);
sDisRxStatusMode(&rp->rp_channel);
sClrTxXOFF(&rp->rp_channel);
/* sDisRTSFlowCtl(&rp->rp_channel);
sDisCTSFlowCtl(&rp->rp_channel);
*/
sDisTxSoftFlowCtl(&rp->rp_channel);
sStartRxProcessor(&rp->rp_channel);
sEnRxFIFO(&rp->rp_channel);
sEnTransmit(&rp->rp_channel);
/* sSetDTR(&rp->rp_channel);
sSetRTS(&rp->rp_channel);
*/
++rp->wopeners;
error = rpparam(tp, &tp->t_termios);
--rp->wopeners;
if(error != 0) {
splx(oldspl);
return(error);
}
rp_num_ports_open++;
IntMask = sGetChanIntID(&rp->rp_channel);
IntMask = IntMask & rp->rp_intmask;
ChanStatus = sGetChanStatus(&rp->rp_channel);
if((IntMask & DELTA_CD) || IS_CALLOUT(dev)) {
if((ChanStatus & CD_ACT) || IS_CALLOUT(dev)) {
(void)ttyld_modem(tp, 1);
}
}
if(rp_num_ports_open == 1)
rp_callout_handle = timeout(rp_do_poll,
(void *)NULL, POLL_INTERVAL);
}
if(!(flag&O_NONBLOCK) && !(tp->t_cflag&CLOCAL) &&
!(tp->t_state & TS_CARR_ON) && !(IS_CALLOUT(dev))) {
++rp->wopeners;
error = tsleep(TSA_CARR_ON(tp), TTIPRI | PCATCH,
"rpdcd", 0);
--rp->wopeners;
if(error != 0)
goto out;
goto open_top;
}
error = ttyld_open(tp, dev);
ttyldoptim(tp);
if(tp->t_state & TS_ISOPEN && IS_CALLOUT(dev))
rp->active_out = TRUE;
/* if(rp_num_ports_open == 1)
timeout(rp_do_poll, (void *)NULL, POLL_INTERVAL);
*/
out:
splx(oldspl);
if(!(tp->t_state & TS_ISOPEN) && rp->wopeners == 0) {
rphardclose(rp);
}
out2:
if (error == 0)
device_busy(rp->rp_ctlp->dev);
return(error);
}
static int
rpclose(dev, flag, mode, td)
struct cdev *dev;
int flag, mode;
struct thread *td;
{
int oldspl, unit, mynor, umynor, port; /* SG */
struct rp_port *rp;
struct tty *tp;
CHANNEL_t *cp;
umynor = (((minor(dev) >> 16) -1) * 32); /* SG */
port = (minor(dev) & 0x1f); /* SG */
mynor = (port + umynor); /* SG */
unit = minor_to_unit[mynor]; /* SG */
if(IS_CONTROL(dev))
return(0);
rp = rp_addr(unit) + port;
cp = &rp->rp_channel;
tp = rp->rp_tty;
oldspl = spltty();
ttyld_close(tp, flag);
ttyldoptim(tp);
rphardclose(rp);
tp->t_state &= ~TS_BUSY;
tty_close(tp);
splx(oldspl);
device_unbusy(rp->rp_ctlp->dev);
return(0);
}
static void
rphardclose(struct rp_port *rp)
{
int mynor;
struct tty *tp;
CHANNEL_t *cp;
cp = &rp->rp_channel;
tp = rp->rp_tty;
mynor = MINOR_MAGIC(tp->t_dev);
sFlushRxFIFO(cp);
sFlushTxFIFO(cp);
sDisTransmit(cp);
sDisInterrupts(cp, TXINT_EN|MCINT_EN|RXINT_EN|SRCINT_EN|CHANINT_EN);
sDisRTSFlowCtl(cp);
sDisCTSFlowCtl(cp);
sDisTxSoftFlowCtl(cp);
sClrTxXOFF(cp);
if(tp->t_cflag&HUPCL || !(tp->t_state&TS_ISOPEN) || !rp->active_out) {
sClrDTR(cp);
}
if(IS_CALLOUT(tp->t_dev)) {
sClrDTR(cp);
}
if(tp->t_dtr_wait != 0) {
timeout(rpdtrwakeup, rp, tp->t_dtr_wait);
rp->state |= ~SET_DTR;
}
rp->active_out = FALSE;
wakeup(&rp->active_out);
wakeup(TSA_CARR_ON(tp));
}
static
int
rpwrite(dev, uio, flag)
struct cdev *dev;
struct uio *uio;
int flag;
{
struct rp_port *rp;
struct tty *tp;
int unit, mynor, port, umynor, error = 0; /* SG */
umynor = (((minor(dev) >> 16) -1) * 32); /* SG */
port = (minor(dev) & 0x1f); /* SG */
mynor = (port + umynor); /* SG */
unit = minor_to_unit[mynor]; /* SG */
if(IS_CONTROL(dev))
return(ENODEV);
rp = rp_addr(unit) + port;
tp = rp->rp_tty;
while(rp->rp_disable_writes) {
rp->rp_waiting = 1;
error = ttysleep(tp, (caddr_t)rp, TTOPRI|PCATCH, "rp_write", 0);
if (error)
return(error);
}
error = ttyld_write(tp, uio, flag);
return error;
}
static void
rpdtrwakeup(void *chan)
{
struct rp_port *rp;
rp = (struct rp_port *)chan;
rp->state &= SET_DTR;
wakeup(&rp->rp_tty->t_dtr_wait);
}
static int
rpioctl(dev, cmd, data, flag, td)
struct cdev *dev;
u_long cmd;
caddr_t data;
int flag;
struct thread *td;
{
struct rp_port *rp;
CHANNEL_t *cp;
struct tty *tp;
int unit, mynor, port, umynor; /* SG */
int oldspl;
int error = 0;
int arg, flags, result, ChanStatus;
struct termios *t;
#ifndef BURN_BRIDGES
#if defined(COMPAT_43)
u_long oldcmd;
struct termios term;
#endif
#endif
umynor = (((minor(dev) >> 16) -1) * 32); /* SG */
port = (minor(dev) & 0x1f); /* SG */
mynor = (port + umynor); /* SG */
unit = minor_to_unit[mynor];
rp = rp_addr(unit) + port;
if(IS_CONTROL(dev)) {
struct termios *ct;
switch (IS_CONTROL(dev)) {
case CONTROL_INIT_STATE:
ct = IS_CALLOUT(dev) ? &rp->it_out : &rp->it_in;
break;
case CONTROL_LOCK_STATE:
ct = IS_CALLOUT(dev) ? &rp->lt_out : &rp->lt_in;
break;
default:
return(ENODEV); /* /dev/nodev */
}
switch (cmd) {
case TIOCSETA:
error = suser(td);
if(error != 0)
return(error);
*ct = *(struct termios *)data;
return(0);
case TIOCGETA:
*(struct termios *)data = *ct;
return(0);
case TIOCGETD:
*(int *)data = TTYDISC;
return(0);
case TIOCGWINSZ:
bzero(data, sizeof(struct winsize));
return(0);
default:
return(ENOTTY);
}
}
tp = rp->rp_tty;
cp = &rp->rp_channel;
#ifndef BURN_BRIDGES
#if defined(COMPAT_43)
term = tp->t_termios;
oldcmd = cmd;
error = ttsetcompat(tp, &cmd, data, &term);
if(error != 0)
return(error);
if(cmd != oldcmd) {
data = (caddr_t)&term;
}
#endif
#endif
if((cmd == TIOCSETA) || (cmd == TIOCSETAW) || (cmd == TIOCSETAF)) {
int cc;
struct termios *dt = (struct termios *)data;
struct termios *lt = IS_CALLOUT(dev)
? &rp->lt_out : &rp->lt_in;
dt->c_iflag = (tp->t_iflag & lt->c_iflag)
| (dt->c_iflag & ~lt->c_iflag);
dt->c_oflag = (tp->t_oflag & lt->c_oflag)
| (dt->c_oflag & ~lt->c_oflag);
dt->c_cflag = (tp->t_cflag & lt->c_cflag)
| (dt->c_cflag & ~lt->c_cflag);
dt->c_lflag = (tp->t_lflag & lt->c_lflag)
| (dt->c_lflag & ~lt->c_lflag);
for(cc = 0; cc < NCCS; ++cc)
if(lt->c_cc[cc] != 0)
dt->c_cc[cc] = tp->t_cc[cc];
if(lt->c_ispeed != 0)
dt->c_ispeed = tp->t_ispeed;
if(lt->c_ospeed != 0)
dt->c_ospeed = tp->t_ospeed;
}
t = &tp->t_termios;
error = ttyioctl(dev, cmd, data, flag, td);
ttyldoptim(tp);
if(error != ENOTTY)
return(error);
oldspl = spltty();
flags = rp->rp_channel.TxControl[3];
switch(cmd) {
case TIOCSBRK:
sSendBreak(&rp->rp_channel);
break;
case TIOCCBRK:
sClrBreak(&rp->rp_channel);
break;
case TIOCSDTR:
sSetDTR(&rp->rp_channel);
sSetRTS(&rp->rp_channel);
break;
case TIOCCDTR:
sClrDTR(&rp->rp_channel);
break;
case TIOCMSET:
arg = *(int *) data;
flags = 0;
if(arg & TIOCM_RTS)
flags |= SET_RTS;
if(arg & TIOCM_DTR)
flags |= SET_DTR;
rp->rp_channel.TxControl[3] =
((rp->rp_channel.TxControl[3]
& ~(SET_RTS | SET_DTR)) | flags);
rp_writech4(&rp->rp_channel,_INDX_ADDR,
*(DWord_t *) &(rp->rp_channel.TxControl[0]));
break;
case TIOCMBIS:
arg = *(int *) data;
flags = 0;
if(arg & TIOCM_RTS)
flags |= SET_RTS;
if(arg & TIOCM_DTR)
flags |= SET_DTR;
rp->rp_channel.TxControl[3] |= flags;
rp_writech4(&rp->rp_channel,_INDX_ADDR,
*(DWord_t *) &(rp->rp_channel.TxControl[0]));
break;
case TIOCMBIC:
arg = *(int *) data;
flags = 0;
if(arg & TIOCM_RTS)
flags |= SET_RTS;
if(arg & TIOCM_DTR)
flags |= SET_DTR;
rp->rp_channel.TxControl[3] &= ~flags;
rp_writech4(&rp->rp_channel,_INDX_ADDR,
*(DWord_t *) &(rp->rp_channel.TxControl[0]));
break;
case TIOCMGET:
ChanStatus = sGetChanStatusLo(&rp->rp_channel);
flags = rp->rp_channel.TxControl[3];
result = TIOCM_LE; /* always on while open for some reason */
result |= (((flags & SET_DTR) ? TIOCM_DTR : 0)
| ((flags & SET_RTS) ? TIOCM_RTS : 0)
| ((ChanStatus & CD_ACT) ? TIOCM_CAR : 0)
| ((ChanStatus & DSR_ACT) ? TIOCM_DSR : 0)
| ((ChanStatus & CTS_ACT) ? TIOCM_CTS : 0));
if(rp->rp_channel.RxControl[2] & RTSFC_EN)
{
result |= TIOCM_RTS;
}
*(int *)data = result;
break;
default:
splx(oldspl);
return ENOTTY;
}
splx(oldspl);
return(0);
}
static struct speedtab baud_table[] = {
{B0, 0}, {B50, BRD50}, {B75, BRD75},
{B110, BRD110}, {B134, BRD134}, {B150, BRD150},
{B200, BRD200}, {B300, BRD300}, {B600, BRD600},
{B1200, BRD1200}, {B1800, BRD1800}, {B2400, BRD2400},
{B4800, BRD4800}, {B9600, BRD9600}, {B19200, BRD19200},
{B38400, BRD38400}, {B7200, BRD7200}, {B14400, BRD14400},
{B57600, BRD57600}, {B76800, BRD76800},
{B115200, BRD115200}, {B230400, BRD230400},
{-1, -1}
};
static int
rpparam(tp, t)
struct tty *tp;
struct termios *t;
{
struct rp_port *rp;
CHANNEL_t *cp;
int unit, mynor, port, umynor; /* SG */
int oldspl, cflag, iflag, oflag, lflag;
int ospeed;
#ifdef RPCLOCAL
int devshift;
#endif
umynor = (((minor(tp->t_dev) >> 16) -1) * 32); /* SG */
port = (minor(tp->t_dev) & 0x1f); /* SG */
mynor = (port + umynor); /* SG */
unit = minor_to_unit[mynor];
rp = rp_addr(unit) + port;
cp = &rp->rp_channel;
oldspl = spltty();
cflag = t->c_cflag;
#ifdef RPCLOCAL
devshift = umynor / 32;
devshift = 1 << devshift;
if ( devshift & RPCLOCAL ) {
cflag |= CLOCAL;
}
#endif
iflag = t->c_iflag;
oflag = t->c_oflag;
lflag = t->c_lflag;
ospeed = ttspeedtab(t->c_ispeed, baud_table);
if(ospeed < 0 || t->c_ispeed != t->c_ospeed)
return(EINVAL);
tp->t_ispeed = t->c_ispeed;
tp->t_ospeed = t->c_ospeed;
tp->t_cflag = cflag;
tp->t_iflag = iflag;
tp->t_oflag = oflag;
tp->t_lflag = lflag;
if(t->c_ospeed == 0) {
sClrDTR(cp);
return(0);
}
rp->rp_fifo_lw = ((t->c_ospeed*2) / 1000) +1;
/* Set baud rate ----- we only pay attention to ispeed */
sSetDTR(cp);
sSetRTS(cp);
sSetBaud(cp, ospeed);
if(cflag & CSTOPB) {
sSetStop2(cp);
} else {
sSetStop1(cp);
}
if(cflag & PARENB) {
sEnParity(cp);
if(cflag & PARODD) {
sSetOddParity(cp);
} else {
sSetEvenParity(cp);
}
}
else {
sDisParity(cp);
}
if((cflag & CSIZE) == CS8) {
sSetData8(cp);
rp->rp_imask = 0xFF;
} else {
sSetData7(cp);
rp->rp_imask = 0x7F;
}
if(iflag & ISTRIP) {
rp->rp_imask &= 0x7F;
}
if(cflag & CLOCAL) {
rp->rp_intmask &= ~DELTA_CD;
} else {
rp->rp_intmask |= DELTA_CD;
}
/* Put flow control stuff here */
if(cflag & CCTS_OFLOW) {
sEnCTSFlowCtl(cp);
} else {
sDisCTSFlowCtl(cp);
}
if(cflag & CRTS_IFLOW) {
rp->rp_rts_iflow = 1;
} else {
rp->rp_rts_iflow = 0;
}
if(cflag & CRTS_IFLOW) {
sEnRTSFlowCtl(cp);
} else {
sDisRTSFlowCtl(cp);
}
ttyldoptim(tp);
if((cflag & CLOCAL) || (sGetChanStatusLo(cp) & CD_ACT)) {
tp->t_state |= TS_CARR_ON;
wakeup(TSA_CARR_ON(tp));
}
/* tp->t_state |= TS_CAN_BYPASS_L_RINT;
flags = rp->rp_channel.TxControl[3];
if(flags & SET_DTR)
else
if(flags & SET_RTS)
else
*/
splx(oldspl);
return(0);
}
static void
rpstart(tp)
struct tty *tp;
{
struct rp_port *rp;
CHANNEL_t *cp;
struct clist *qp;
int unit, mynor, port, umynor; /* SG */
char flags;
int spl, xmit_fifo_room;
int count, wcount;
umynor = (((minor(tp->t_dev) >> 16) -1) * 32); /* SG */
port = (minor(tp->t_dev) & 0x1f); /* SG */
mynor = (port + umynor); /* SG */
unit = minor_to_unit[mynor];
rp = rp_addr(unit) + port;
cp = &rp->rp_channel;
flags = rp->rp_channel.TxControl[3];
spl = spltty();
if(tp->t_state & (TS_TIMEOUT | TS_TTSTOP)) {
ttwwakeup(tp);
splx(spl);
return;
}
if(rp->rp_xmit_stopped) {
sEnTransmit(cp);
rp->rp_xmit_stopped = 0;
}
count = sGetTxCnt(cp);
if(tp->t_outq.c_cc == 0) {
if((tp->t_state & TS_BUSY) && (count == 0)) {
tp->t_state &= ~TS_BUSY;
}
ttwwakeup(tp);
splx(spl);
return;
}
xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp);
qp = &tp->t_outq;
if(xmit_fifo_room > 0 && qp->c_cc > 0) {
tp->t_state |= TS_BUSY;
count = q_to_b( qp, (char *)rp->TxBuf, xmit_fifo_room );
wcount = count >> 1;
if ( wcount ) {
rp_writemultich2(cp, sGetTxRxDataIO(cp), (u_int16_t *)rp->TxBuf, wcount);
}
if ( count & 1 ) {
rp_writech1(cp, sGetTxRxDataIO(cp),
((unsigned char *)(rp->TxBuf))[(count-1)]);
}
}
rp->rp_restart = (qp->c_cc > 0) ? rp->rp_fifo_lw : 0;
ttwwakeup(tp);
splx(spl);
}
static
void
rpstop(tp, flag)
register struct tty *tp;
int flag;
{
struct rp_port *rp;
CHANNEL_t *cp;
int unit, mynor, port, umynor; /* SG */
int spl;
umynor = (((minor(tp->t_dev) >> 16) -1) * 32); /* SG */
port = (minor(tp->t_dev) & 0x1f); /* SG */
mynor = (port + umynor); /* SG */
unit = minor_to_unit[mynor];
rp = rp_addr(unit) + port;
cp = &rp->rp_channel;
spl = spltty();
if(tp->t_state & TS_BUSY) {
if((tp->t_state&TS_TTSTOP) == 0) {
sFlushTxFIFO(cp);
} else {
if(rp->rp_xmit_stopped == 0) {
sDisTransmit(cp);
rp->rp_xmit_stopped = 1;
}
}
}
splx(spl);
rpstart(tp);
}