Linux-2.6.33.2/arch/alpha/kernel/entry.S
/*
* arch/alpha/kernel/entry.S
*
* Kernel entry-points.
*/
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
#include <asm/pal.h>
#include <asm/errno.h>
#include <asm/unistd.h>
.text
.set noat
/* Stack offsets. */
#define SP_OFF 184
#define SWITCH_STACK_SIZE 320
/*
* This defines the normal kernel pt-regs layout.
*
* regs 9-15 preserved by C code
* regs 16-18 saved by PAL-code
* regs 29-30 saved and set up by PAL-code
* JRP - Save regs 16-18 in a special area of the stack, so that
* the palcode-provided values are available to the signal handler.
*/
#define SAVE_ALL \
subq $sp, SP_OFF, $sp; \
stq $0, 0($sp); \
stq $1, 8($sp); \
stq $2, 16($sp); \
stq $3, 24($sp); \
stq $4, 32($sp); \
stq $28, 144($sp); \
lda $2, alpha_mv; \
stq $5, 40($sp); \
stq $6, 48($sp); \
stq $7, 56($sp); \
stq $8, 64($sp); \
stq $19, 72($sp); \
stq $20, 80($sp); \
stq $21, 88($sp); \
ldq $2, HAE_CACHE($2); \
stq $22, 96($sp); \
stq $23, 104($sp); \
stq $24, 112($sp); \
stq $25, 120($sp); \
stq $26, 128($sp); \
stq $27, 136($sp); \
stq $2, 152($sp); \
stq $16, 160($sp); \
stq $17, 168($sp); \
stq $18, 176($sp)
#define RESTORE_ALL \
lda $19, alpha_mv; \
ldq $0, 0($sp); \
ldq $1, 8($sp); \
ldq $2, 16($sp); \
ldq $3, 24($sp); \
ldq $21, 152($sp); \
ldq $20, HAE_CACHE($19); \
ldq $4, 32($sp); \
ldq $5, 40($sp); \
ldq $6, 48($sp); \
ldq $7, 56($sp); \
subq $20, $21, $20; \
ldq $8, 64($sp); \
beq $20, 99f; \
ldq $20, HAE_REG($19); \
stq $21, HAE_CACHE($19); \
stq $21, 0($20); \
ldq $0, 0($sp); \
ldq $1, 8($sp); \
99:; \
ldq $19, 72($sp); \
ldq $20, 80($sp); \
ldq $21, 88($sp); \
ldq $22, 96($sp); \
ldq $23, 104($sp); \
ldq $24, 112($sp); \
ldq $25, 120($sp); \
ldq $26, 128($sp); \
ldq $27, 136($sp); \
ldq $28, 144($sp); \
addq $sp, SP_OFF, $sp
/*
* Non-syscall kernel entry points.
*/
.align 4
.globl entInt
.ent entInt
entInt:
SAVE_ALL
lda $8, 0x3fff
lda $26, ret_from_sys_call
bic $sp, $8, $8
mov $sp, $19
jsr $31, do_entInt
.end entInt
.align 4
.globl entArith
.ent entArith
entArith:
SAVE_ALL
lda $8, 0x3fff
lda $26, ret_from_sys_call
bic $sp, $8, $8
mov $sp, $18
jsr $31, do_entArith
.end entArith
.align 4
.globl entMM
.ent entMM
entMM:
SAVE_ALL
/* save $9 - $15 so the inline exception code can manipulate them. */
subq $sp, 56, $sp
stq $9, 0($sp)
stq $10, 8($sp)
stq $11, 16($sp)
stq $12, 24($sp)
stq $13, 32($sp)
stq $14, 40($sp)
stq $15, 48($sp)
addq $sp, 56, $19
/* handle the fault */
lda $8, 0x3fff
bic $sp, $8, $8
jsr $26, do_page_fault
/* reload the registers after the exception code played. */
ldq $9, 0($sp)
ldq $10, 8($sp)
ldq $11, 16($sp)
ldq $12, 24($sp)
ldq $13, 32($sp)
ldq $14, 40($sp)
ldq $15, 48($sp)
addq $sp, 56, $sp
/* finish up the syscall as normal. */
br ret_from_sys_call
.end entMM
.align 4
.globl entIF
.ent entIF
entIF:
SAVE_ALL
lda $8, 0x3fff
lda $26, ret_from_sys_call
bic $sp, $8, $8
mov $sp, $17
jsr $31, do_entIF
.end entIF
.align 4
.globl entUna
.ent entUna
entUna:
lda $sp, -256($sp)
stq $0, 0($sp)
ldq $0, 256($sp) /* get PS */
stq $1, 8($sp)
stq $2, 16($sp)
stq $3, 24($sp)
and $0, 8, $0 /* user mode? */
stq $4, 32($sp)
bne $0, entUnaUser /* yup -> do user-level unaligned fault */
stq $5, 40($sp)
stq $6, 48($sp)
stq $7, 56($sp)
stq $8, 64($sp)
stq $9, 72($sp)
stq $10, 80($sp)
stq $11, 88($sp)
stq $12, 96($sp)
stq $13, 104($sp)
stq $14, 112($sp)
stq $15, 120($sp)
/* 16-18 PAL-saved */
stq $19, 152($sp)
stq $20, 160($sp)
stq $21, 168($sp)
stq $22, 176($sp)
stq $23, 184($sp)
stq $24, 192($sp)
stq $25, 200($sp)
stq $26, 208($sp)
stq $27, 216($sp)
stq $28, 224($sp)
mov $sp, $19
stq $gp, 232($sp)
lda $8, 0x3fff
stq $31, 248($sp)
bic $sp, $8, $8
jsr $26, do_entUna
ldq $0, 0($sp)
ldq $1, 8($sp)
ldq $2, 16($sp)
ldq $3, 24($sp)
ldq $4, 32($sp)
ldq $5, 40($sp)
ldq $6, 48($sp)
ldq $7, 56($sp)
ldq $8, 64($sp)
ldq $9, 72($sp)
ldq $10, 80($sp)
ldq $11, 88($sp)
ldq $12, 96($sp)
ldq $13, 104($sp)
ldq $14, 112($sp)
ldq $15, 120($sp)
/* 16-18 PAL-saved */
ldq $19, 152($sp)
ldq $20, 160($sp)
ldq $21, 168($sp)
ldq $22, 176($sp)
ldq $23, 184($sp)
ldq $24, 192($sp)
ldq $25, 200($sp)
ldq $26, 208($sp)
ldq $27, 216($sp)
ldq $28, 224($sp)
ldq $gp, 232($sp)
lda $sp, 256($sp)
call_pal PAL_rti
.end entUna
.align 4
.ent entUnaUser
entUnaUser:
ldq $0, 0($sp) /* restore original $0 */
lda $sp, 256($sp) /* pop entUna's stack frame */
SAVE_ALL /* setup normal kernel stack */
lda $sp, -56($sp)
stq $9, 0($sp)
stq $10, 8($sp)
stq $11, 16($sp)
stq $12, 24($sp)
stq $13, 32($sp)
stq $14, 40($sp)
stq $15, 48($sp)
lda $8, 0x3fff
addq $sp, 56, $19
bic $sp, $8, $8
jsr $26, do_entUnaUser
ldq $9, 0($sp)
ldq $10, 8($sp)
ldq $11, 16($sp)
ldq $12, 24($sp)
ldq $13, 32($sp)
ldq $14, 40($sp)
ldq $15, 48($sp)
lda $sp, 56($sp)
br ret_from_sys_call
.end entUnaUser
.align 4
.globl entDbg
.ent entDbg
entDbg:
SAVE_ALL
lda $8, 0x3fff
lda $26, ret_from_sys_call
bic $sp, $8, $8
mov $sp, $16
jsr $31, do_entDbg
.end entDbg
/*
* The system call entry point is special. Most importantly, it looks
* like a function call to userspace as far as clobbered registers. We
* do preserve the argument registers (for syscall restarts) and $26
* (for leaf syscall functions).
*
* So much for theory. We don't take advantage of this yet.
*
* Note that a0-a2 are not saved by PALcode as with the other entry points.
*/
.align 4
.globl entSys
.globl ret_from_sys_call
.ent entSys
entSys:
SAVE_ALL
lda $8, 0x3fff
bic $sp, $8, $8
lda $4, NR_SYSCALLS($31)
stq $16, SP_OFF+24($sp)
lda $5, sys_call_table
lda $27, sys_ni_syscall
cmpult $0, $4, $4
ldl $3, TI_FLAGS($8)
stq $17, SP_OFF+32($sp)
s8addq $0, $5, $5
stq $18, SP_OFF+40($sp)
blbs $3, strace
beq $4, 1f
ldq $27, 0($5)
1: jsr $26, ($27), alpha_ni_syscall
ldgp $gp, 0($26)
blt $0, $syscall_error /* the call failed */
stq $0, 0($sp)
stq $31, 72($sp) /* a3=0 => no error */
.align 4
ret_from_sys_call:
cmovne $26, 0, $19 /* $19 = 0 => non-restartable */
ldq $0, SP_OFF($sp)
and $0, 8, $0
beq $0, restore_all
ret_from_reschedule:
/* Make sure need_resched and sigpending don't change between
sampling and the rti. */
lda $16, 7
call_pal PAL_swpipl
ldl $5, TI_FLAGS($8)
and $5, _TIF_WORK_MASK, $2
bne $5, work_pending
restore_all:
RESTORE_ALL
call_pal PAL_rti
.align 3
$syscall_error:
/*
* Some system calls (e.g., ptrace) can return arbitrary
* values which might normally be mistaken as error numbers.
* Those functions must zero $0 (v0) directly in the stack
* frame to indicate that a negative return value wasn't an
* error number..
*/
ldq $19, 0($sp) /* old syscall nr (zero if success) */
beq $19, $ret_success
ldq $20, 72($sp) /* .. and this a3 */
subq $31, $0, $0 /* with error in v0 */
addq $31, 1, $1 /* set a3 for errno return */
stq $0, 0($sp)
mov $31, $26 /* tell "ret_from_sys_call" we can restart */
stq $1, 72($sp) /* a3 for return */
br ret_from_sys_call
$ret_success:
stq $0, 0($sp)
stq $31, 72($sp) /* a3=0 => no error */
br ret_from_sys_call
.end entSys
/*
* Do all cleanup when returning from all interrupts and system calls.
*
* Arguments:
* $5: TI_FLAGS.
* $8: current.
* $19: The old syscall number, or zero if this is not a return
* from a syscall that errored and is possibly restartable.
* $20: Error indication.
*/
.align 4
.ent work_pending
work_pending:
and $5, _TIF_NEED_RESCHED, $2
beq $2, $work_notifysig
$work_resched:
subq $sp, 16, $sp
stq $19, 0($sp) /* save syscall nr */
stq $20, 8($sp) /* and error indication (a3) */
jsr $26, schedule
ldq $19, 0($sp)
ldq $20, 8($sp)
addq $sp, 16, $sp
/* Make sure need_resched and sigpending don't change between
sampling and the rti. */
lda $16, 7
call_pal PAL_swpipl
ldl $5, TI_FLAGS($8)
and $5, _TIF_WORK_MASK, $2
beq $2, restore_all
and $5, _TIF_NEED_RESCHED, $2
bne $2, $work_resched
$work_notifysig:
mov $sp, $16
br $1, do_switch_stack
mov $sp, $17
mov $5, $18
jsr $26, do_notify_resume
bsr $1, undo_switch_stack
br restore_all
.end work_pending
/*
* PTRACE syscall handler
*/
.align 4
.ent strace
strace:
/* set up signal stack, call syscall_trace */
bsr $1, do_switch_stack
jsr $26, syscall_trace
bsr $1, undo_switch_stack
/* get the system call number and the arguments back.. */
ldq $0, 0($sp)
ldq $16, SP_OFF+24($sp)
ldq $17, SP_OFF+32($sp)
ldq $18, SP_OFF+40($sp)
ldq $19, 72($sp)
ldq $20, 80($sp)
ldq $21, 88($sp)
/* get the system call pointer.. */
lda $1, NR_SYSCALLS($31)
lda $2, sys_call_table
lda $27, alpha_ni_syscall
cmpult $0, $1, $1
s8addq $0, $2, $2
beq $1, 1f
ldq $27, 0($2)
1: jsr $26, ($27), sys_gettimeofday
ldgp $gp, 0($26)
/* check return.. */
blt $0, $strace_error /* the call failed */
stq $31, 72($sp) /* a3=0 => no error */
$strace_success:
stq $0, 0($sp) /* save return value */
bsr $1, do_switch_stack
jsr $26, syscall_trace
bsr $1, undo_switch_stack
br $31, ret_from_sys_call
.align 3
$strace_error:
ldq $19, 0($sp) /* old syscall nr (zero if success) */
beq $19, $strace_success
ldq $20, 72($sp) /* .. and this a3 */
subq $31, $0, $0 /* with error in v0 */
addq $31, 1, $1 /* set a3 for errno return */
stq $0, 0($sp)
stq $1, 72($sp) /* a3 for return */
bsr $1, do_switch_stack
mov $19, $9 /* save old syscall number */
mov $20, $10 /* save old a3 */
jsr $26, syscall_trace
mov $9, $19
mov $10, $20
bsr $1, undo_switch_stack
mov $31, $26 /* tell "ret_from_sys_call" we can restart */
br ret_from_sys_call
.end strace
/*
* Save and restore the switch stack -- aka the balance of the user context.
*/
.align 4
.ent do_switch_stack
do_switch_stack:
lda $sp, -SWITCH_STACK_SIZE($sp)
stq $9, 0($sp)
stq $10, 8($sp)
stq $11, 16($sp)
stq $12, 24($sp)
stq $13, 32($sp)
stq $14, 40($sp)
stq $15, 48($sp)
stq $26, 56($sp)
stt $f0, 64($sp)
stt $f1, 72($sp)
stt $f2, 80($sp)
stt $f3, 88($sp)
stt $f4, 96($sp)
stt $f5, 104($sp)
stt $f6, 112($sp)
stt $f7, 120($sp)
stt $f8, 128($sp)
stt $f9, 136($sp)
stt $f10, 144($sp)
stt $f11, 152($sp)
stt $f12, 160($sp)
stt $f13, 168($sp)
stt $f14, 176($sp)
stt $f15, 184($sp)
stt $f16, 192($sp)
stt $f17, 200($sp)
stt $f18, 208($sp)
stt $f19, 216($sp)
stt $f20, 224($sp)
stt $f21, 232($sp)
stt $f22, 240($sp)
stt $f23, 248($sp)
stt $f24, 256($sp)
stt $f25, 264($sp)
stt $f26, 272($sp)
stt $f27, 280($sp)
mf_fpcr $f0 # get fpcr
stt $f28, 288($sp)
stt $f29, 296($sp)
stt $f30, 304($sp)
stt $f0, 312($sp) # save fpcr in slot of $f31
ldt $f0, 64($sp) # dont let "do_switch_stack" change fp state.
ret $31, ($1), 1
.end do_switch_stack
.align 4
.ent undo_switch_stack
undo_switch_stack:
ldq $9, 0($sp)
ldq $10, 8($sp)
ldq $11, 16($sp)
ldq $12, 24($sp)
ldq $13, 32($sp)
ldq $14, 40($sp)
ldq $15, 48($sp)
ldq $26, 56($sp)
ldt $f30, 312($sp) # get saved fpcr
ldt $f0, 64($sp)
ldt $f1, 72($sp)
ldt $f2, 80($sp)
ldt $f3, 88($sp)
mt_fpcr $f30 # install saved fpcr
ldt $f4, 96($sp)
ldt $f5, 104($sp)
ldt $f6, 112($sp)
ldt $f7, 120($sp)
ldt $f8, 128($sp)
ldt $f9, 136($sp)
ldt $f10, 144($sp)
ldt $f11, 152($sp)
ldt $f12, 160($sp)
ldt $f13, 168($sp)
ldt $f14, 176($sp)
ldt $f15, 184($sp)
ldt $f16, 192($sp)
ldt $f17, 200($sp)
ldt $f18, 208($sp)
ldt $f19, 216($sp)
ldt $f20, 224($sp)
ldt $f21, 232($sp)
ldt $f22, 240($sp)
ldt $f23, 248($sp)
ldt $f24, 256($sp)
ldt $f25, 264($sp)
ldt $f26, 272($sp)
ldt $f27, 280($sp)
ldt $f28, 288($sp)
ldt $f29, 296($sp)
ldt $f30, 304($sp)
lda $sp, SWITCH_STACK_SIZE($sp)
ret $31, ($1), 1
.end undo_switch_stack
/*
* The meat of the context switch code.
*/
.align 4
.globl alpha_switch_to
.ent alpha_switch_to
alpha_switch_to:
.prologue 0
bsr $1, do_switch_stack
call_pal PAL_swpctx
lda $8, 0x3fff
bsr $1, undo_switch_stack
bic $sp, $8, $8
mov $17, $0
ret
.end alpha_switch_to
/*
* New processes begin life here.
*/
.globl ret_from_fork
.align 4
.ent ret_from_fork
ret_from_fork:
lda $26, ret_from_sys_call
mov $17, $16
jmp $31, schedule_tail
.end ret_from_fork
/*
* kernel_thread(fn, arg, clone_flags)
*/
.align 4
.globl kernel_thread
.ent kernel_thread
kernel_thread:
/* We can be called from a module. */
ldgp $gp, 0($27)
.prologue 1
subq $sp, SP_OFF+6*8, $sp
br $1, 2f /* load start address */
/* We've now "returned" from a fake system call. */
unop
blt $0, 1f /* error? */
ldi $1, 0x3fff
beq $20, 1f /* parent or child? */
bic $sp, $1, $8 /* in child. */
jsr $26, ($27)
ldgp $gp, 0($26)
mov $0, $16
mov $31, $26
jmp $31, sys_exit
1: ret /* in parent. */
.align 4
2: /* Fake a system call stack frame, as we can't do system calls
from kernel space. Note that we store FN and ARG as they
need to be set up in the child for the call. Also store $8
and $26 for use in the parent. */
stq $31, SP_OFF($sp) /* ps */
stq $1, SP_OFF+8($sp) /* pc */
stq $gp, SP_OFF+16($sp) /* gp */
stq $16, 136($sp) /* $27; FN for child */
stq $17, SP_OFF+24($sp) /* $16; ARG for child */
stq $8, 64($sp) /* $8 */
stq $26, 128($sp) /* $26 */
/* Avoid the HAE being gratuitously wrong, to avoid restoring it. */
ldq $2, alpha_mv+HAE_CACHE
stq $2, 152($sp) /* HAE */
/* Shuffle FLAGS to the front; add CLONE_VM. */
ldi $1, CLONE_VM|CLONE_UNTRACED
or $18, $1, $16
bsr $26, sys_clone
/* We don't actually care for a3 success widgetry in the kernel.
Not for positive errno values. */
stq $0, 0($sp) /* $0 */
br restore_all
.end kernel_thread
/*
* kernel_execve(path, argv, envp)
*/
.align 4
.globl kernel_execve
.ent kernel_execve
kernel_execve:
/* We can be called from a module. */
ldgp $gp, 0($27)
lda $sp, -(32+SIZEOF_PT_REGS+8)($sp)
.frame $sp, 32+SIZEOF_PT_REGS+8, $26, 0
stq $26, 0($sp)
stq $16, 8($sp)
stq $17, 16($sp)
stq $18, 24($sp)
.prologue 1
lda $16, 32($sp)
lda $17, 0
lda $18, SIZEOF_PT_REGS
bsr $26, memset !samegp
/* Avoid the HAE being gratuitously wrong, which would cause us
to do the whole turn off interrupts thing and restore it. */
ldq $2, alpha_mv+HAE_CACHE
stq $2, 152+32($sp)
ldq $16, 8($sp)
ldq $17, 16($sp)
ldq $18, 24($sp)
lda $19, 32($sp)
bsr $26, do_execve !samegp
ldq $26, 0($sp)
bne $0, 1f /* error! */
/* Move the temporary pt_regs struct from its current location
to the top of the kernel stack frame. See copy_thread for
details for a normal process. */
lda $16, 0x4000 - SIZEOF_PT_REGS($8)
lda $17, 32($sp)
lda $18, SIZEOF_PT_REGS
bsr $26, memmove !samegp
/* Take that over as our new stack frame and visit userland! */
lda $sp, 0x4000 - SIZEOF_PT_REGS($8)
br $31, ret_from_sys_call
1: lda $sp, 32+SIZEOF_PT_REGS+8($sp)
ret
.end kernel_execve
/*
* Special system calls. Most of these are special in that they either
* have to play switch_stack games or in some way use the pt_regs struct.
*/
.align 4
.globl sys_fork
.ent sys_fork
sys_fork:
.prologue 0
mov $sp, $21
bsr $1, do_switch_stack
bis $31, SIGCHLD, $16
mov $31, $17
mov $31, $18
mov $31, $19
mov $31, $20
jsr $26, alpha_clone
bsr $1, undo_switch_stack
ret
.end sys_fork
.align 4
.globl sys_clone
.ent sys_clone
sys_clone:
.prologue 0
mov $sp, $21
bsr $1, do_switch_stack
/* $16, $17, $18, $19, $20 come from the user. */
jsr $26, alpha_clone
bsr $1, undo_switch_stack
ret
.end sys_clone
.align 4
.globl sys_vfork
.ent sys_vfork
sys_vfork:
.prologue 0
mov $sp, $16
bsr $1, do_switch_stack
jsr $26, alpha_vfork
bsr $1, undo_switch_stack
ret
.end sys_vfork
.align 4
.globl sys_sigreturn
.ent sys_sigreturn
sys_sigreturn:
.prologue 0
mov $sp, $17
lda $18, -SWITCH_STACK_SIZE($sp)
lda $sp, -SWITCH_STACK_SIZE($sp)
jsr $26, do_sigreturn
br $1, undo_switch_stack
br ret_from_sys_call
.end sys_sigreturn
.align 4
.globl sys_rt_sigreturn
.ent sys_rt_sigreturn
sys_rt_sigreturn:
.prologue 0
mov $sp, $17
lda $18, -SWITCH_STACK_SIZE($sp)
lda $sp, -SWITCH_STACK_SIZE($sp)
jsr $26, do_rt_sigreturn
br $1, undo_switch_stack
br ret_from_sys_call
.end sys_rt_sigreturn
.align 4
.globl sys_sigsuspend
.ent sys_sigsuspend
sys_sigsuspend:
.prologue 0
mov $sp, $17
br $1, do_switch_stack
mov $sp, $18
subq $sp, 16, $sp
stq $26, 0($sp)
jsr $26, do_sigsuspend
ldq $26, 0($sp)
lda $sp, SWITCH_STACK_SIZE+16($sp)
ret
.end sys_sigsuspend
.align 4
.globl sys_rt_sigsuspend
.ent sys_rt_sigsuspend
sys_rt_sigsuspend:
.prologue 0
mov $sp, $18
br $1, do_switch_stack
mov $sp, $19
subq $sp, 16, $sp
stq $26, 0($sp)
jsr $26, do_rt_sigsuspend
ldq $26, 0($sp)
lda $sp, SWITCH_STACK_SIZE+16($sp)
ret
.end sys_rt_sigsuspend
.align 4
.globl sys_sethae
.ent sys_sethae
sys_sethae:
.prologue 0
stq $16, 152($sp)
ret
.end sys_sethae
.align 4
.globl osf_getpriority
.ent osf_getpriority
osf_getpriority:
lda $sp, -16($sp)
stq $26, 0($sp)
.prologue 0
jsr $26, sys_getpriority
ldq $26, 0($sp)
blt $0, 1f
/* Return value is the unbiased priority, i.e. 20 - prio.
This does result in negative return values, so signal
no error by writing into the R0 slot. */
lda $1, 20
stq $31, 16($sp)
subl $1, $0, $0
unop
1: lda $sp, 16($sp)
ret
.end osf_getpriority
.align 4
.globl sys_getxuid
.ent sys_getxuid
sys_getxuid:
.prologue 0
ldq $2, TI_TASK($8)
ldq $3, TASK_CRED($2)
ldl $0, CRED_UID($3)
ldl $1, CRED_EUID($3)
stq $1, 80($sp)
ret
.end sys_getxuid
.align 4
.globl sys_getxgid
.ent sys_getxgid
sys_getxgid:
.prologue 0
ldq $2, TI_TASK($8)
ldq $3, TASK_CRED($2)
ldl $0, CRED_GID($3)
ldl $1, CRED_EGID($3)
stq $1, 80($sp)
ret
.end sys_getxgid
.align 4
.globl sys_getxpid
.ent sys_getxpid
sys_getxpid:
.prologue 0
ldq $2, TI_TASK($8)
/* See linux/kernel/timer.c sys_getppid for discussion
about this loop. */
ldq $3, TASK_GROUP_LEADER($2)
ldq $4, TASK_REAL_PARENT($3)
ldl $0, TASK_TGID($2)
1: ldl $1, TASK_TGID($4)
#ifdef CONFIG_SMP
mov $4, $5
mb
ldq $3, TASK_GROUP_LEADER($2)
ldq $4, TASK_REAL_PARENT($3)
cmpeq $4, $5, $5
beq $5, 1b
#endif
stq $1, 80($sp)
ret
.end sys_getxpid
.align 4
.globl sys_alpha_pipe
.ent sys_alpha_pipe
sys_alpha_pipe:
lda $sp, -16($sp)
stq $26, 0($sp)
.prologue 0
mov $31, $17
lda $16, 8($sp)
jsr $26, do_pipe_flags
ldq $26, 0($sp)
bne $0, 1f
/* The return values are in $0 and $20. */
ldl $1, 12($sp)
ldl $0, 8($sp)
stq $1, 80+16($sp)
1: lda $sp, 16($sp)
ret
.end sys_alpha_pipe
.align 4
.globl sys_execve
.ent sys_execve
sys_execve:
.prologue 0
mov $sp, $19
jmp $31, do_sys_execve
.end sys_execve
.align 4
.globl osf_sigprocmask
.ent osf_sigprocmask
osf_sigprocmask:
.prologue 0
mov $sp, $18
jmp $31, sys_osf_sigprocmask
.end osf_sigprocmask
.align 4
.globl alpha_ni_syscall
.ent alpha_ni_syscall
alpha_ni_syscall:
.prologue 0
/* Special because it also implements overflow handling via
syscall number 0. And if you recall, zero is a special
trigger for "not an error". Store large non-zero there. */
lda $0, -ENOSYS
unop
stq $0, 0($sp)
ret
.end alpha_ni_syscall