Linux-2.6.33.2/arch/sparc/kernel/sun4m_irq.c
/* sun4m_irq.c
* arch/sparc/kernel/sun4m_irq.c:
*
* djhr: Hacked out of irq.c into a CPU dependent version.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
* Copyright (C) 1995 Miguel de Icaza (miguel@nuclecu.unam.mx)
* Copyright (C) 1995 Pete A. Zaitcev (zaitcev@yahoo.com)
* Copyright (C) 1996 Dave Redman (djhr@tadpole.co.uk)
*/
#include <linux/errno.h>
#include <linux/linkage.h>
#include <linux/kernel_stat.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/ptrace.h>
#include <linux/smp.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <asm/ptrace.h>
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/psr.h>
#include <asm/vaddrs.h>
#include <asm/timer.h>
#include <asm/openprom.h>
#include <asm/oplib.h>
#include <asm/traps.h>
#include <asm/pgalloc.h>
#include <asm/pgtable.h>
#include <asm/smp.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/cacheflush.h>
#include "irq.h"
struct sun4m_irq_percpu {
u32 pending;
u32 clear;
u32 set;
};
struct sun4m_irq_global {
u32 pending;
u32 mask;
u32 mask_clear;
u32 mask_set;
u32 interrupt_target;
};
/* Code in entry.S needs to get at these register mappings. */
struct sun4m_irq_percpu __iomem *sun4m_irq_percpu[SUN4M_NCPUS];
struct sun4m_irq_global __iomem *sun4m_irq_global;
/* Dave Redman (djhr@tadpole.co.uk)
* The sun4m interrupt registers.
*/
#define SUN4M_INT_ENABLE 0x80000000
#define SUN4M_INT_E14 0x00000080
#define SUN4M_INT_E10 0x00080000
#define SUN4M_HARD_INT(x) (0x000000001 << (x))
#define SUN4M_SOFT_INT(x) (0x000010000 << (x))
#define SUN4M_INT_MASKALL 0x80000000 /* mask all interrupts */
#define SUN4M_INT_MODULE_ERR 0x40000000 /* module error */
#define SUN4M_INT_M2S_WRITE_ERR 0x20000000 /* write buffer error */
#define SUN4M_INT_ECC_ERR 0x10000000 /* ecc memory error */
#define SUN4M_INT_VME_ERR 0x08000000 /* vme async error */
#define SUN4M_INT_FLOPPY 0x00400000 /* floppy disk */
#define SUN4M_INT_MODULE 0x00200000 /* module interrupt */
#define SUN4M_INT_VIDEO 0x00100000 /* onboard video */
#define SUN4M_INT_REALTIME 0x00080000 /* system timer */
#define SUN4M_INT_SCSI 0x00040000 /* onboard scsi */
#define SUN4M_INT_AUDIO 0x00020000 /* audio/isdn */
#define SUN4M_INT_ETHERNET 0x00010000 /* onboard ethernet */
#define SUN4M_INT_SERIAL 0x00008000 /* serial ports */
#define SUN4M_INT_KBDMS 0x00004000 /* keyboard/mouse */
#define SUN4M_INT_SBUSBITS 0x00003F80 /* sbus int bits */
#define SUN4M_INT_VMEBITS 0x0000007F /* vme int bits */
#define SUN4M_INT_ERROR (SUN4M_INT_MODULE_ERR | \
SUN4M_INT_M2S_WRITE_ERR | \
SUN4M_INT_ECC_ERR | \
SUN4M_INT_VME_ERR)
#define SUN4M_INT_SBUS(x) (1 << (x+7))
#define SUN4M_INT_VME(x) (1 << (x))
/* Interrupt levels used by OBP */
#define OBP_INT_LEVEL_SOFT 0x10
#define OBP_INT_LEVEL_ONBOARD 0x20
#define OBP_INT_LEVEL_SBUS 0x30
#define OBP_INT_LEVEL_VME 0x40
/* Interrupt level assignment on sun4m:
*
* level source
* ------------------------------------------------------------
* 1 softint-1
* 2 softint-2, VME/SBUS level 1
* 3 softint-3, VME/SBUS level 2
* 4 softint-4, onboard SCSI
* 5 softint-5, VME/SBUS level 3
* 6 softint-6, onboard ETHERNET
* 7 softint-7, VME/SBUS level 4
* 8 softint-8, onboard VIDEO
* 9 softint-9, VME/SBUS level 5, Module Interrupt
* 10 softint-10, system counter/timer
* 11 softint-11, VME/SBUS level 6, Floppy
* 12 softint-12, Keyboard/Mouse, Serial
* 13 softint-13, VME/SBUS level 7, ISDN Audio
* 14 softint-14, per-processor counter/timer
* 15 softint-15, Asynchronous Errors (broadcast)
*
* Each interrupt source is masked distinctly in the sun4m interrupt
* registers. The PIL level alone is therefore ambiguous, since multiple
* interrupt sources map to a single PIL.
*
* This ambiguity is resolved in the 'intr' property for device nodes
* in the OF device tree. Each 'intr' property entry is composed of
* two 32-bit words. The first word is the IRQ priority value, which
* is what we're intersted in. The second word is the IRQ vector, which
* is unused.
*
* The low 4 bits of the IRQ priority indicate the PIL, and the upper
* 4 bits indicate onboard vs. SBUS leveled vs. VME leveled. 0x20
* means onboard, 0x30 means SBUS leveled, and 0x40 means VME leveled.
*
* For example, an 'intr' IRQ priority value of 0x24 is onboard SCSI
* whereas a value of 0x33 is SBUS level 2. Here are some sample
* 'intr' property IRQ priority values from ss4, ss5, ss10, ss20, and
* Tadpole S3 GX systems.
*
* esp: 0x24 onboard ESP SCSI
* le: 0x26 onboard Lance ETHERNET
* p9100: 0x32 SBUS level 1 P9100 video
* bpp: 0x33 SBUS level 2 BPP parallel port device
* DBRI: 0x39 SBUS level 5 DBRI ISDN audio
* SUNW,leo: 0x39 SBUS level 5 LEO video
* pcmcia: 0x3b SBUS level 6 PCMCIA controller
* uctrl: 0x3b SBUS level 6 UCTRL device
* modem: 0x3d SBUS level 7 MODEM
* zs: 0x2c onboard keyboard/mouse/serial
* floppy: 0x2b onboard Floppy
* power: 0x22 onboard power device (XXX unknown mask bit XXX)
*/
static unsigned long irq_mask[0x50] = {
/* SMP */
0, SUN4M_SOFT_INT(1),
SUN4M_SOFT_INT(2), SUN4M_SOFT_INT(3),
SUN4M_SOFT_INT(4), SUN4M_SOFT_INT(5),
SUN4M_SOFT_INT(6), SUN4M_SOFT_INT(7),
SUN4M_SOFT_INT(8), SUN4M_SOFT_INT(9),
SUN4M_SOFT_INT(10), SUN4M_SOFT_INT(11),
SUN4M_SOFT_INT(12), SUN4M_SOFT_INT(13),
SUN4M_SOFT_INT(14), SUN4M_SOFT_INT(15),
/* soft */
0, SUN4M_SOFT_INT(1),
SUN4M_SOFT_INT(2), SUN4M_SOFT_INT(3),
SUN4M_SOFT_INT(4), SUN4M_SOFT_INT(5),
SUN4M_SOFT_INT(6), SUN4M_SOFT_INT(7),
SUN4M_SOFT_INT(8), SUN4M_SOFT_INT(9),
SUN4M_SOFT_INT(10), SUN4M_SOFT_INT(11),
SUN4M_SOFT_INT(12), SUN4M_SOFT_INT(13),
SUN4M_SOFT_INT(14), SUN4M_SOFT_INT(15),
/* onboard */
0, 0, 0, 0,
SUN4M_INT_SCSI, 0, SUN4M_INT_ETHERNET, 0,
SUN4M_INT_VIDEO, SUN4M_INT_MODULE,
SUN4M_INT_REALTIME, SUN4M_INT_FLOPPY,
(SUN4M_INT_SERIAL | SUN4M_INT_KBDMS),
SUN4M_INT_AUDIO, 0, SUN4M_INT_MODULE_ERR,
/* sbus */
0, 0, SUN4M_INT_SBUS(0), SUN4M_INT_SBUS(1),
0, SUN4M_INT_SBUS(2), 0, SUN4M_INT_SBUS(3),
0, SUN4M_INT_SBUS(4), 0, SUN4M_INT_SBUS(5),
0, SUN4M_INT_SBUS(6), 0, 0,
/* vme */
0, 0, SUN4M_INT_VME(0), SUN4M_INT_VME(1),
0, SUN4M_INT_VME(2), 0, SUN4M_INT_VME(3),
0, SUN4M_INT_VME(4), 0, SUN4M_INT_VME(5),
0, SUN4M_INT_VME(6), 0, 0
};
static unsigned long sun4m_get_irqmask(unsigned int irq)
{
unsigned long mask;
if (irq < 0x50)
mask = irq_mask[irq];
else
mask = 0;
if (!mask)
printk(KERN_ERR "sun4m_get_irqmask: IRQ%d has no valid mask!\n",
irq);
return mask;
}
static void sun4m_disable_irq(unsigned int irq_nr)
{
unsigned long mask, flags;
int cpu = smp_processor_id();
mask = sun4m_get_irqmask(irq_nr);
local_irq_save(flags);
if (irq_nr > 15)
sbus_writel(mask, &sun4m_irq_global->mask_set);
else
sbus_writel(mask, &sun4m_irq_percpu[cpu]->set);
local_irq_restore(flags);
}
static void sun4m_enable_irq(unsigned int irq_nr)
{
unsigned long mask, flags;
int cpu = smp_processor_id();
/* Dreadful floppy hack. When we use 0x2b instead of
* 0x0b the system blows (it starts to whistle!).
* So we continue to use 0x0b. Fixme ASAP. --P3
*/
if (irq_nr != 0x0b) {
mask = sun4m_get_irqmask(irq_nr);
local_irq_save(flags);
if (irq_nr > 15)
sbus_writel(mask, &sun4m_irq_global->mask_clear);
else
sbus_writel(mask, &sun4m_irq_percpu[cpu]->clear);
local_irq_restore(flags);
} else {
local_irq_save(flags);
sbus_writel(SUN4M_INT_FLOPPY, &sun4m_irq_global->mask_clear);
local_irq_restore(flags);
}
}
static unsigned long cpu_pil_to_imask[16] = {
/*0*/ 0x00000000,
/*1*/ 0x00000000,
/*2*/ SUN4M_INT_SBUS(0) | SUN4M_INT_VME(0),
/*3*/ SUN4M_INT_SBUS(1) | SUN4M_INT_VME(1),
/*4*/ SUN4M_INT_SCSI,
/*5*/ SUN4M_INT_SBUS(2) | SUN4M_INT_VME(2),
/*6*/ SUN4M_INT_ETHERNET,
/*7*/ SUN4M_INT_SBUS(3) | SUN4M_INT_VME(3),
/*8*/ SUN4M_INT_VIDEO,
/*9*/ SUN4M_INT_SBUS(4) | SUN4M_INT_VME(4) | SUN4M_INT_MODULE_ERR,
/*10*/ SUN4M_INT_REALTIME,
/*11*/ SUN4M_INT_SBUS(5) | SUN4M_INT_VME(5) | SUN4M_INT_FLOPPY,
/*12*/ SUN4M_INT_SERIAL | SUN4M_INT_KBDMS,
/*13*/ SUN4M_INT_SBUS(6) | SUN4M_INT_VME(6) | SUN4M_INT_AUDIO,
/*14*/ SUN4M_INT_E14,
/*15*/ SUN4M_INT_ERROR
};
/* We assume the caller has disabled local interrupts when these are called,
* or else very bizarre behavior will result.
*/
static void sun4m_disable_pil_irq(unsigned int pil)
{
sbus_writel(cpu_pil_to_imask[pil], &sun4m_irq_global->mask_set);
}
static void sun4m_enable_pil_irq(unsigned int pil)
{
sbus_writel(cpu_pil_to_imask[pil], &sun4m_irq_global->mask_clear);
}
#ifdef CONFIG_SMP
static void sun4m_send_ipi(int cpu, int level)
{
unsigned long mask = sun4m_get_irqmask(level);
sbus_writel(mask, &sun4m_irq_percpu[cpu]->set);
}
static void sun4m_clear_ipi(int cpu, int level)
{
unsigned long mask = sun4m_get_irqmask(level);
sbus_writel(mask, &sun4m_irq_percpu[cpu]->clear);
}
static void sun4m_set_udt(int cpu)
{
sbus_writel(cpu, &sun4m_irq_global->interrupt_target);
}
#endif
struct sun4m_timer_percpu {
u32 l14_limit;
u32 l14_count;
u32 l14_limit_noclear;
u32 user_timer_start_stop;
};
static struct sun4m_timer_percpu __iomem *timers_percpu[SUN4M_NCPUS];
struct sun4m_timer_global {
u32 l10_limit;
u32 l10_count;
u32 l10_limit_noclear;
u32 reserved;
u32 timer_config;
};
static struct sun4m_timer_global __iomem *timers_global;
#define TIMER_IRQ (OBP_INT_LEVEL_ONBOARD | 10)
unsigned int lvl14_resolution = (((1000000/HZ) + 1) << 10);
static void sun4m_clear_clock_irq(void)
{
sbus_readl(&timers_global->l10_limit);
}
void sun4m_nmi(struct pt_regs *regs)
{
unsigned long afsr, afar, si;
printk(KERN_ERR "Aieee: sun4m NMI received!\n");
/* XXX HyperSparc hack XXX */
__asm__ __volatile__("mov 0x500, %%g1\n\t"
"lda [%%g1] 0x4, %0\n\t"
"mov 0x600, %%g1\n\t"
"lda [%%g1] 0x4, %1\n\t" :
"=r" (afsr), "=r" (afar));
printk(KERN_ERR "afsr=%08lx afar=%08lx\n", afsr, afar);
si = sbus_readl(&sun4m_irq_global->pending);
printk(KERN_ERR "si=%08lx\n", si);
if (si & SUN4M_INT_MODULE_ERR)
printk(KERN_ERR "Module async error\n");
if (si & SUN4M_INT_M2S_WRITE_ERR)
printk(KERN_ERR "MBus/SBus async error\n");
if (si & SUN4M_INT_ECC_ERR)
printk(KERN_ERR "ECC memory error\n");
if (si & SUN4M_INT_VME_ERR)
printk(KERN_ERR "VME async error\n");
printk(KERN_ERR "you lose buddy boy...\n");
show_regs(regs);
prom_halt();
}
/* Exported for sun4m_smp.c */
void sun4m_clear_profile_irq(int cpu)
{
sbus_readl(&timers_percpu[cpu]->l14_limit);
}
static void sun4m_load_profile_irq(int cpu, unsigned int limit)
{
sbus_writel(limit, &timers_percpu[cpu]->l14_limit);
}
static void __init sun4m_init_timers(irq_handler_t counter_fn)
{
struct device_node *dp = of_find_node_by_name(NULL, "counter");
int i, err, len, num_cpu_timers;
const u32 *addr;
if (!dp) {
printk(KERN_ERR "sun4m_init_timers: No 'counter' node.\n");
return;
}
addr = of_get_property(dp, "address", &len);
of_node_put(dp);
if (!addr) {
printk(KERN_ERR "sun4m_init_timers: No 'address' prop.\n");
return;
}
num_cpu_timers = (len / sizeof(u32)) - 1;
for (i = 0; i < num_cpu_timers; i++) {
timers_percpu[i] = (void __iomem *)
(unsigned long) addr[i];
}
timers_global = (void __iomem *)
(unsigned long) addr[num_cpu_timers];
sbus_writel((((1000000/HZ) + 1) << 10), &timers_global->l10_limit);
master_l10_counter = &timers_global->l10_count;
err = request_irq(TIMER_IRQ, counter_fn,
(IRQF_DISABLED | SA_STATIC_ALLOC), "timer", NULL);
if (err) {
printk(KERN_ERR "sun4m_init_timers: Register IRQ error %d.\n",
err);
return;
}
for (i = 0; i < num_cpu_timers; i++)
sbus_writel(0, &timers_percpu[i]->l14_limit);
if (num_cpu_timers == 4)
sbus_writel(SUN4M_INT_E14, &sun4m_irq_global->mask_set);
#ifdef CONFIG_SMP
{
unsigned long flags;
extern unsigned long lvl14_save[4];
struct tt_entry *trap_table = &sparc_ttable[SP_TRAP_IRQ1 + (14 - 1)];
/* For SMP we use the level 14 ticker, however the bootup code
* has copied the firmware's level 14 vector into the boot cpu's
* trap table, we must fix this now or we get squashed.
*/
local_irq_save(flags);
trap_table->inst_one = lvl14_save[0];
trap_table->inst_two = lvl14_save[1];
trap_table->inst_three = lvl14_save[2];
trap_table->inst_four = lvl14_save[3];
local_flush_cache_all();
local_irq_restore(flags);
}
#endif
}
void __init sun4m_init_IRQ(void)
{
struct device_node *dp = of_find_node_by_name(NULL, "interrupt");
int len, i, mid, num_cpu_iregs;
const u32 *addr;
if (!dp) {
printk(KERN_ERR "sun4m_init_IRQ: No 'interrupt' node.\n");
return;
}
addr = of_get_property(dp, "address", &len);
of_node_put(dp);
if (!addr) {
printk(KERN_ERR "sun4m_init_IRQ: No 'address' prop.\n");
return;
}
num_cpu_iregs = (len / sizeof(u32)) - 1;
for (i = 0; i < num_cpu_iregs; i++) {
sun4m_irq_percpu[i] = (void __iomem *)
(unsigned long) addr[i];
}
sun4m_irq_global = (void __iomem *)
(unsigned long) addr[num_cpu_iregs];
local_irq_disable();
sbus_writel(~SUN4M_INT_MASKALL, &sun4m_irq_global->mask_set);
for (i = 0; !cpu_find_by_instance(i, NULL, &mid); i++)
sbus_writel(~0x17fff, &sun4m_irq_percpu[mid]->clear);
if (num_cpu_iregs == 4)
sbus_writel(0, &sun4m_irq_global->interrupt_target);
BTFIXUPSET_CALL(enable_irq, sun4m_enable_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(disable_irq, sun4m_disable_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(enable_pil_irq, sun4m_enable_pil_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(disable_pil_irq, sun4m_disable_pil_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(clear_clock_irq, sun4m_clear_clock_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(load_profile_irq, sun4m_load_profile_irq, BTFIXUPCALL_NORM);
sparc_init_timers = sun4m_init_timers;
#ifdef CONFIG_SMP
BTFIXUPSET_CALL(set_cpu_int, sun4m_send_ipi, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(clear_cpu_int, sun4m_clear_ipi, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(set_irq_udt, sun4m_set_udt, BTFIXUPCALL_NORM);
#endif
/* Cannot enable interrupts until OBP ticker is disabled. */
}