Linux-2.6.33.2/arch/x86/kernel/apic/summit_32.c
/*
* IBM Summit-Specific Code
*
* Written By: Matthew Dobson, IBM Corporation
*
* Copyright (c) 2003 IBM Corp.
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <colpatch@us.ibm.com>
*
*/
#include <linux/mm.h>
#include <linux/init.h>
#include <asm/io.h>
#include <asm/bios_ebda.h>
/*
* APIC driver for the IBM "Summit" chipset.
*/
#include <linux/threads.h>
#include <linux/cpumask.h>
#include <asm/mpspec.h>
#include <asm/apic.h>
#include <asm/smp.h>
#include <asm/fixmap.h>
#include <asm/apicdef.h>
#include <asm/ipi.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/gfp.h>
#include <linux/smp.h>
static unsigned summit_get_apic_id(unsigned long x)
{
return (x >> 24) & 0xFF;
}
static inline void summit_send_IPI_mask(const struct cpumask *mask, int vector)
{
default_send_IPI_mask_sequence_logical(mask, vector);
}
static void summit_send_IPI_allbutself(int vector)
{
default_send_IPI_mask_allbutself_logical(cpu_online_mask, vector);
}
static void summit_send_IPI_all(int vector)
{
summit_send_IPI_mask(cpu_online_mask, vector);
}
#include <asm/tsc.h>
extern int use_cyclone;
#ifdef CONFIG_X86_SUMMIT_NUMA
static void setup_summit(void);
#else
static inline void setup_summit(void) {}
#endif
static int summit_mps_oem_check(struct mpc_table *mpc, char *oem,
char *productid)
{
if (!strncmp(oem, "IBM ENSW", 8) &&
(!strncmp(productid, "VIGIL SMP", 9)
|| !strncmp(productid, "EXA", 3)
|| !strncmp(productid, "RUTHLESS SMP", 12))){
mark_tsc_unstable("Summit based system");
use_cyclone = 1; /*enable cyclone-timer*/
setup_summit();
return 1;
}
return 0;
}
/* Hook from generic ACPI tables.c */
static int summit_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
if (!strncmp(oem_id, "IBM", 3) &&
(!strncmp(oem_table_id, "SERVIGIL", 8)
|| !strncmp(oem_table_id, "EXA", 3))){
mark_tsc_unstable("Summit based system");
use_cyclone = 1; /*enable cyclone-timer*/
setup_summit();
return 1;
}
return 0;
}
struct rio_table_hdr {
unsigned char version; /* Version number of this data structure */
/* Version 3 adds chassis_num & WP_index */
unsigned char num_scal_dev; /* # of Scalability devices (Twisters for Vigil) */
unsigned char num_rio_dev; /* # of RIO I/O devices (Cyclones and Winnipegs) */
} __attribute__((packed));
struct scal_detail {
unsigned char node_id; /* Scalability Node ID */
unsigned long CBAR; /* Address of 1MB register space */
unsigned char port0node; /* Node ID port connected to: 0xFF=None */
unsigned char port0port; /* Port num port connected to: 0,1,2, or 0xFF=None */
unsigned char port1node; /* Node ID port connected to: 0xFF = None */
unsigned char port1port; /* Port num port connected to: 0,1,2, or 0xFF=None */
unsigned char port2node; /* Node ID port connected to: 0xFF = None */
unsigned char port2port; /* Port num port connected to: 0,1,2, or 0xFF=None */
unsigned char chassis_num; /* 1 based Chassis number (1 = boot node) */
} __attribute__((packed));
struct rio_detail {
unsigned char node_id; /* RIO Node ID */
unsigned long BBAR; /* Address of 1MB register space */
unsigned char type; /* Type of device */
unsigned char owner_id; /* For WPEG: Node ID of Cyclone that owns this WPEG*/
/* For CYC: Node ID of Twister that owns this CYC */
unsigned char port0node; /* Node ID port connected to: 0xFF=None */
unsigned char port0port; /* Port num port connected to: 0,1,2, or 0xFF=None */
unsigned char port1node; /* Node ID port connected to: 0xFF=None */
unsigned char port1port; /* Port num port connected to: 0,1,2, or 0xFF=None */
unsigned char first_slot; /* For WPEG: Lowest slot number below this WPEG */
/* For CYC: 0 */
unsigned char status; /* For WPEG: Bit 0 = 1 : the XAPIC is used */
/* = 0 : the XAPIC is not used, ie:*/
/* ints fwded to another XAPIC */
/* Bits1:7 Reserved */
/* For CYC: Bits0:7 Reserved */
unsigned char WP_index; /* For WPEG: WPEG instance index - lower ones have */
/* lower slot numbers/PCI bus numbers */
/* For CYC: No meaning */
unsigned char chassis_num; /* 1 based Chassis number */
/* For LookOut WPEGs this field indicates the */
/* Expansion Chassis #, enumerated from Boot */
/* Node WPEG external port, then Boot Node CYC */
/* external port, then Next Vigil chassis WPEG */
/* external port, etc. */
/* Shared Lookouts have only 1 chassis number (the */
/* first one assigned) */
} __attribute__((packed));
typedef enum {
CompatTwister = 0, /* Compatibility Twister */
AltTwister = 1, /* Alternate Twister of internal 8-way */
CompatCyclone = 2, /* Compatibility Cyclone */
AltCyclone = 3, /* Alternate Cyclone of internal 8-way */
CompatWPEG = 4, /* Compatibility WPEG */
AltWPEG = 5, /* Second Planar WPEG */
LookOutAWPEG = 6, /* LookOut WPEG */
LookOutBWPEG = 7, /* LookOut WPEG */
} node_type;
static inline int is_WPEG(struct rio_detail *rio){
return (rio->type == CompatWPEG || rio->type == AltWPEG ||
rio->type == LookOutAWPEG || rio->type == LookOutBWPEG);
}
#define SUMMIT_APIC_DFR_VALUE (APIC_DFR_CLUSTER)
static const struct cpumask *summit_target_cpus(void)
{
/* CPU_MASK_ALL (0xff) has undefined behaviour with
* dest_LowestPrio mode logical clustered apic interrupt routing
* Just start on cpu 0. IRQ balancing will spread load
*/
return cpumask_of(0);
}
static unsigned long summit_check_apicid_used(physid_mask_t *map, int apicid)
{
return 0;
}
/* we don't use the phys_cpu_present_map to indicate apicid presence */
static unsigned long summit_check_apicid_present(int bit)
{
return 1;
}
static void summit_init_apic_ldr(void)
{
unsigned long val, id;
int count = 0;
u8 my_id = (u8)hard_smp_processor_id();
u8 my_cluster = APIC_CLUSTER(my_id);
#ifdef CONFIG_SMP
u8 lid;
int i;
/* Create logical APIC IDs by counting CPUs already in cluster. */
for (count = 0, i = nr_cpu_ids; --i >= 0; ) {
lid = cpu_2_logical_apicid[i];
if (lid != BAD_APICID && APIC_CLUSTER(lid) == my_cluster)
++count;
}
#endif
/* We only have a 4 wide bitmap in cluster mode. If a deranged
* BIOS puts 5 CPUs in one APIC cluster, we're hosed. */
BUG_ON(count >= XAPIC_DEST_CPUS_SHIFT);
id = my_cluster | (1UL << count);
apic_write(APIC_DFR, SUMMIT_APIC_DFR_VALUE);
val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
val |= SET_APIC_LOGICAL_ID(id);
apic_write(APIC_LDR, val);
}
static int summit_apic_id_registered(void)
{
return 1;
}
static void summit_setup_apic_routing(void)
{
printk("Enabling APIC mode: Summit. Using %d I/O APICs\n",
nr_ioapics);
}
static int summit_apicid_to_node(int logical_apicid)
{
#ifdef CONFIG_SMP
return apicid_2_node[hard_smp_processor_id()];
#else
return 0;
#endif
}
/* Mapping from cpu number to logical apicid */
static inline int summit_cpu_to_logical_apicid(int cpu)
{
#ifdef CONFIG_SMP
if (cpu >= nr_cpu_ids)
return BAD_APICID;
return cpu_2_logical_apicid[cpu];
#else
return logical_smp_processor_id();
#endif
}
static int summit_cpu_present_to_apicid(int mps_cpu)
{
if (mps_cpu < nr_cpu_ids)
return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu);
else
return BAD_APICID;
}
static void summit_ioapic_phys_id_map(physid_mask_t *phys_id_map, physid_mask_t *retmap)
{
/* For clustered we don't have a good way to do this yet - hack */
physids_promote(0x0FL, retmap);
}
static void summit_apicid_to_cpu_present(int apicid, physid_mask_t *retmap)
{
physid_set_mask_of_physid(0, retmap);
}
static int summit_check_phys_apicid_present(int physical_apicid)
{
return 1;
}
static unsigned int summit_cpu_mask_to_apicid(const struct cpumask *cpumask)
{
unsigned int round = 0;
int cpu, apicid = 0;
/*
* The cpus in the mask must all be on the apic cluster.
*/
for_each_cpu(cpu, cpumask) {
int new_apicid = summit_cpu_to_logical_apicid(cpu);
if (round && APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) {
printk("%s: Not a valid mask!\n", __func__);
return BAD_APICID;
}
apicid |= new_apicid;
round++;
}
return apicid;
}
static unsigned int summit_cpu_mask_to_apicid_and(const struct cpumask *inmask,
const struct cpumask *andmask)
{
int apicid = summit_cpu_to_logical_apicid(0);
cpumask_var_t cpumask;
if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC))
return apicid;
cpumask_and(cpumask, inmask, andmask);
cpumask_and(cpumask, cpumask, cpu_online_mask);
apicid = summit_cpu_mask_to_apicid(cpumask);
free_cpumask_var(cpumask);
return apicid;
}
/*
* cpuid returns the value latched in the HW at reset, not the APIC ID
* register's value. For any box whose BIOS changes APIC IDs, like
* clustered APIC systems, we must use hard_smp_processor_id.
*
* See Intel's IA-32 SW Dev's Manual Vol2 under CPUID.
*/
static int summit_phys_pkg_id(int cpuid_apic, int index_msb)
{
return hard_smp_processor_id() >> index_msb;
}
static int probe_summit(void)
{
/* probed later in mptable/ACPI hooks */
return 0;
}
static void summit_vector_allocation_domain(int cpu, struct cpumask *retmask)
{
/* Careful. Some cpus do not strictly honor the set of cpus
* specified in the interrupt destination when using lowest
* priority interrupt delivery mode.
*
* In particular there was a hyperthreading cpu observed to
* deliver interrupts to the wrong hyperthread when only one
* hyperthread was specified in the interrupt desitination.
*/
cpumask_clear(retmask);
cpumask_bits(retmask)[0] = APIC_ALL_CPUS;
}
#ifdef CONFIG_X86_SUMMIT_NUMA
static struct rio_table_hdr *rio_table_hdr;
static struct scal_detail *scal_devs[MAX_NUMNODES];
static struct rio_detail *rio_devs[MAX_NUMNODES*4];
#ifndef CONFIG_X86_NUMAQ
static int mp_bus_id_to_node[MAX_MP_BUSSES];
#endif
static int setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
{
int twister = 0, node = 0;
int i, bus, num_buses;
for (i = 0; i < rio_table_hdr->num_rio_dev; i++) {
if (rio_devs[i]->node_id == rio_devs[wpeg_num]->owner_id) {
twister = rio_devs[i]->owner_id;
break;
}
}
if (i == rio_table_hdr->num_rio_dev) {
printk(KERN_ERR "%s: Couldn't find owner Cyclone for Winnipeg!\n", __func__);
return last_bus;
}
for (i = 0; i < rio_table_hdr->num_scal_dev; i++) {
if (scal_devs[i]->node_id == twister) {
node = scal_devs[i]->node_id;
break;
}
}
if (i == rio_table_hdr->num_scal_dev) {
printk(KERN_ERR "%s: Couldn't find owner Twister for Cyclone!\n", __func__);
return last_bus;
}
switch (rio_devs[wpeg_num]->type) {
case CompatWPEG:
/*
* The Compatibility Winnipeg controls the 2 legacy buses,
* the 66MHz PCI bus [2 slots] and the 2 "extra" buses in case
* a PCI-PCI bridge card is used in either slot: total 5 buses.
*/
num_buses = 5;
break;
case AltWPEG:
/*
* The Alternate Winnipeg controls the 2 133MHz buses [1 slot
* each], their 2 "extra" buses, the 100MHz bus [2 slots] and
* the "extra" buses for each of those slots: total 7 buses.
*/
num_buses = 7;
break;
case LookOutAWPEG:
case LookOutBWPEG:
/*
* A Lookout Winnipeg controls 3 100MHz buses [2 slots each]
* & the "extra" buses for each of those slots: total 9 buses.
*/
num_buses = 9;
break;
default:
printk(KERN_INFO "%s: Unsupported Winnipeg type!\n", __func__);
return last_bus;
}
for (bus = last_bus; bus < last_bus + num_buses; bus++)
mp_bus_id_to_node[bus] = node;
return bus;
}
static int build_detail_arrays(void)
{
unsigned long ptr;
int i, scal_detail_size, rio_detail_size;
if (rio_table_hdr->num_scal_dev > MAX_NUMNODES) {
printk(KERN_WARNING "%s: MAX_NUMNODES too low! Defined as %d, but system has %d nodes.\n", __func__, MAX_NUMNODES, rio_table_hdr->num_scal_dev);
return 0;
}
switch (rio_table_hdr->version) {
default:
printk(KERN_WARNING "%s: Invalid Rio Grande Table Version: %d\n", __func__, rio_table_hdr->version);
return 0;
case 2:
scal_detail_size = 11;
rio_detail_size = 13;
break;
case 3:
scal_detail_size = 12;
rio_detail_size = 15;
break;
}
ptr = (unsigned long)rio_table_hdr + 3;
for (i = 0; i < rio_table_hdr->num_scal_dev; i++, ptr += scal_detail_size)
scal_devs[i] = (struct scal_detail *)ptr;
for (i = 0; i < rio_table_hdr->num_rio_dev; i++, ptr += rio_detail_size)
rio_devs[i] = (struct rio_detail *)ptr;
return 1;
}
void setup_summit(void)
{
unsigned long ptr;
unsigned short offset;
int i, next_wpeg, next_bus = 0;
/* The pointer to the EBDA is stored in the word @ phys 0x40E(40:0E) */
ptr = get_bios_ebda();
ptr = (unsigned long)phys_to_virt(ptr);
rio_table_hdr = NULL;
offset = 0x180;
while (offset) {
/* The block id is stored in the 2nd word */
if (*((unsigned short *)(ptr + offset + 2)) == 0x4752) {
/* set the pointer past the offset & block id */
rio_table_hdr = (struct rio_table_hdr *)(ptr + offset + 4);
break;
}
/* The next offset is stored in the 1st word. 0 means no more */
offset = *((unsigned short *)(ptr + offset));
}
if (!rio_table_hdr) {
printk(KERN_ERR "%s: Unable to locate Rio Grande Table in EBDA - bailing!\n", __func__);
return;
}
if (!build_detail_arrays())
return;
/* The first Winnipeg we're looking for has an index of 0 */
next_wpeg = 0;
do {
for (i = 0; i < rio_table_hdr->num_rio_dev; i++) {
if (is_WPEG(rio_devs[i]) && rio_devs[i]->WP_index == next_wpeg) {
/* It's the Winnipeg we're looking for! */
next_bus = setup_pci_node_map_for_wpeg(i, next_bus);
next_wpeg++;
break;
}
}
/*
* If we go through all Rio devices and don't find one with
* the next index, it means we've found all the Winnipegs,
* and thus all the PCI buses.
*/
if (i == rio_table_hdr->num_rio_dev)
next_wpeg = 0;
} while (next_wpeg != 0);
}
#endif
struct apic apic_summit = {
.name = "summit",
.probe = probe_summit,
.acpi_madt_oem_check = summit_acpi_madt_oem_check,
.apic_id_registered = summit_apic_id_registered,
.irq_delivery_mode = dest_LowestPrio,
/* logical delivery broadcast to all CPUs: */
.irq_dest_mode = 1,
.target_cpus = summit_target_cpus,
.disable_esr = 1,
.dest_logical = APIC_DEST_LOGICAL,
.check_apicid_used = summit_check_apicid_used,
.check_apicid_present = summit_check_apicid_present,
.vector_allocation_domain = summit_vector_allocation_domain,
.init_apic_ldr = summit_init_apic_ldr,
.ioapic_phys_id_map = summit_ioapic_phys_id_map,
.setup_apic_routing = summit_setup_apic_routing,
.multi_timer_check = NULL,
.apicid_to_node = summit_apicid_to_node,
.cpu_to_logical_apicid = summit_cpu_to_logical_apicid,
.cpu_present_to_apicid = summit_cpu_present_to_apicid,
.apicid_to_cpu_present = summit_apicid_to_cpu_present,
.setup_portio_remap = NULL,
.check_phys_apicid_present = summit_check_phys_apicid_present,
.enable_apic_mode = NULL,
.phys_pkg_id = summit_phys_pkg_id,
.mps_oem_check = summit_mps_oem_check,
.get_apic_id = summit_get_apic_id,
.set_apic_id = NULL,
.apic_id_mask = 0xFF << 24,
.cpu_mask_to_apicid = summit_cpu_mask_to_apicid,
.cpu_mask_to_apicid_and = summit_cpu_mask_to_apicid_and,
.send_IPI_mask = summit_send_IPI_mask,
.send_IPI_mask_allbutself = NULL,
.send_IPI_allbutself = summit_send_IPI_allbutself,
.send_IPI_all = summit_send_IPI_all,
.send_IPI_self = default_send_IPI_self,
.trampoline_phys_low = DEFAULT_TRAMPOLINE_PHYS_LOW,
.trampoline_phys_high = DEFAULT_TRAMPOLINE_PHYS_HIGH,
.wait_for_init_deassert = default_wait_for_init_deassert,
.smp_callin_clear_local_apic = NULL,
.inquire_remote_apic = default_inquire_remote_apic,
.read = native_apic_mem_read,
.write = native_apic_mem_write,
.icr_read = native_apic_icr_read,
.icr_write = native_apic_icr_write,
.wait_icr_idle = native_apic_wait_icr_idle,
.safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
};