Linux-2.6.33.2/drivers/acpi/acpica/utdebug.c
/******************************************************************************
*
* Module Name: utdebug - Debug print routines
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2008, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include "accommon.h"
#define _COMPONENT ACPI_UTILITIES
ACPI_MODULE_NAME("utdebug")
#ifdef ACPI_DEBUG_OUTPUT
static acpi_thread_id acpi_gbl_prev_thread_id;
static char *acpi_gbl_fn_entry_str = "----Entry";
static char *acpi_gbl_fn_exit_str = "----Exit-";
/* Local prototypes */
static const char *acpi_ut_trim_function_name(const char *function_name);
/*******************************************************************************
*
* FUNCTION: acpi_ut_init_stack_ptr_trace
*
* PARAMETERS: None
*
* RETURN: None
*
* DESCRIPTION: Save the current CPU stack pointer at subsystem startup
*
******************************************************************************/
void acpi_ut_init_stack_ptr_trace(void)
{
acpi_size current_sp;
acpi_gbl_entry_stack_pointer = ¤t_sp;
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_track_stack_ptr
*
* PARAMETERS: None
*
* RETURN: None
*
* DESCRIPTION: Save the current CPU stack pointer
*
******************************************************************************/
void acpi_ut_track_stack_ptr(void)
{
acpi_size current_sp;
if (¤t_sp < acpi_gbl_lowest_stack_pointer) {
acpi_gbl_lowest_stack_pointer = ¤t_sp;
}
if (acpi_gbl_nesting_level > acpi_gbl_deepest_nesting) {
acpi_gbl_deepest_nesting = acpi_gbl_nesting_level;
}
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_trim_function_name
*
* PARAMETERS: function_name - Ascii string containing a procedure name
*
* RETURN: Updated pointer to the function name
*
* DESCRIPTION: Remove the "Acpi" prefix from the function name, if present.
* This allows compiler macros such as __func__ to be used
* with no change to the debug output.
*
******************************************************************************/
static const char *acpi_ut_trim_function_name(const char *function_name)
{
/* All Function names are longer than 4 chars, check is safe */
if (*(ACPI_CAST_PTR(u32, function_name)) == ACPI_PREFIX_MIXED) {
/* This is the case where the original source has not been modified */
return (function_name + 4);
}
if (*(ACPI_CAST_PTR(u32, function_name)) == ACPI_PREFIX_LOWER) {
/* This is the case where the source has been 'linuxized' */
return (function_name + 5);
}
return (function_name);
}
/*******************************************************************************
*
* FUNCTION: acpi_debug_print
*
* PARAMETERS: requested_debug_level - Requested debug print level
* line_number - Caller's line number (for error output)
* function_name - Caller's procedure name
* module_name - Caller's module name
* component_id - Caller's component ID
* Format - Printf format field
* ... - Optional printf arguments
*
* RETURN: None
*
* DESCRIPTION: Print error message with prefix consisting of the module name,
* line number, and component ID.
*
******************************************************************************/
void ACPI_INTERNAL_VAR_XFACE
acpi_debug_print(u32 requested_debug_level,
u32 line_number,
const char *function_name,
const char *module_name,
u32 component_id, const char *format, ...)
{
acpi_thread_id thread_id;
va_list args;
/*
* Stay silent if the debug level or component ID is disabled
*/
if (!(requested_debug_level & acpi_dbg_level) ||
!(component_id & acpi_dbg_layer)) {
return;
}
/*
* Thread tracking and context switch notification
*/
thread_id = acpi_os_get_thread_id();
if (thread_id != acpi_gbl_prev_thread_id) {
if (ACPI_LV_THREADS & acpi_dbg_level) {
acpi_os_printf
("\n**** Context Switch from TID %p to TID %p ****\n\n",
ACPI_CAST_PTR(void, acpi_gbl_prev_thread_id),
ACPI_CAST_PTR(void, thread_id));
}
acpi_gbl_prev_thread_id = thread_id;
}
/*
* Display the module name, current line number, thread ID (if requested),
* current procedure nesting level, and the current procedure name
*/
acpi_os_printf("%8s-%04ld ", module_name, line_number);
if (ACPI_LV_THREADS & acpi_dbg_level) {
acpi_os_printf("[%p] ", ACPI_CAST_PTR(void, thread_id));
}
acpi_os_printf("[%02ld] %-22.22s: ",
acpi_gbl_nesting_level,
acpi_ut_trim_function_name(function_name));
va_start(args, format);
acpi_os_vprintf(format, args);
va_end(args);
}
ACPI_EXPORT_SYMBOL(acpi_debug_print)
/*******************************************************************************
*
* FUNCTION: acpi_debug_print_raw
*
* PARAMETERS: requested_debug_level - Requested debug print level
* line_number - Caller's line number
* function_name - Caller's procedure name
* module_name - Caller's module name
* component_id - Caller's component ID
* Format - Printf format field
* ... - Optional printf arguments
*
* RETURN: None
*
* DESCRIPTION: Print message with no headers. Has same interface as
* debug_print so that the same macros can be used.
*
******************************************************************************/
void ACPI_INTERNAL_VAR_XFACE
acpi_debug_print_raw(u32 requested_debug_level,
u32 line_number,
const char *function_name,
const char *module_name,
u32 component_id, const char *format, ...)
{
va_list args;
if (!(requested_debug_level & acpi_dbg_level) ||
!(component_id & acpi_dbg_layer)) {
return;
}
va_start(args, format);
acpi_os_vprintf(format, args);
va_end(args);
}
ACPI_EXPORT_SYMBOL(acpi_debug_print_raw)
/*******************************************************************************
*
* FUNCTION: acpi_ut_trace
*
* PARAMETERS: line_number - Caller's line number
* function_name - Caller's procedure name
* module_name - Caller's module name
* component_id - Caller's component ID
*
* RETURN: None
*
* DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is
* set in debug_level
*
******************************************************************************/
void
acpi_ut_trace(u32 line_number,
const char *function_name,
const char *module_name, u32 component_id)
{
acpi_gbl_nesting_level++;
acpi_ut_track_stack_ptr();
acpi_debug_print(ACPI_LV_FUNCTIONS,
line_number, function_name, module_name, component_id,
"%s\n", acpi_gbl_fn_entry_str);
}
ACPI_EXPORT_SYMBOL(acpi_ut_trace)
/*******************************************************************************
*
* FUNCTION: acpi_ut_trace_ptr
*
* PARAMETERS: line_number - Caller's line number
* function_name - Caller's procedure name
* module_name - Caller's module name
* component_id - Caller's component ID
* Pointer - Pointer to display
*
* RETURN: None
*
* DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is
* set in debug_level
*
******************************************************************************/
void
acpi_ut_trace_ptr(u32 line_number,
const char *function_name,
const char *module_name, u32 component_id, void *pointer)
{
acpi_gbl_nesting_level++;
acpi_ut_track_stack_ptr();
acpi_debug_print(ACPI_LV_FUNCTIONS,
line_number, function_name, module_name, component_id,
"%s %p\n", acpi_gbl_fn_entry_str, pointer);
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_trace_str
*
* PARAMETERS: line_number - Caller's line number
* function_name - Caller's procedure name
* module_name - Caller's module name
* component_id - Caller's component ID
* String - Additional string to display
*
* RETURN: None
*
* DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is
* set in debug_level
*
******************************************************************************/
void
acpi_ut_trace_str(u32 line_number,
const char *function_name,
const char *module_name, u32 component_id, char *string)
{
acpi_gbl_nesting_level++;
acpi_ut_track_stack_ptr();
acpi_debug_print(ACPI_LV_FUNCTIONS,
line_number, function_name, module_name, component_id,
"%s %s\n", acpi_gbl_fn_entry_str, string);
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_trace_u32
*
* PARAMETERS: line_number - Caller's line number
* function_name - Caller's procedure name
* module_name - Caller's module name
* component_id - Caller's component ID
* Integer - Integer to display
*
* RETURN: None
*
* DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is
* set in debug_level
*
******************************************************************************/
void
acpi_ut_trace_u32(u32 line_number,
const char *function_name,
const char *module_name, u32 component_id, u32 integer)
{
acpi_gbl_nesting_level++;
acpi_ut_track_stack_ptr();
acpi_debug_print(ACPI_LV_FUNCTIONS,
line_number, function_name, module_name, component_id,
"%s %08X\n", acpi_gbl_fn_entry_str, integer);
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_exit
*
* PARAMETERS: line_number - Caller's line number
* function_name - Caller's procedure name
* module_name - Caller's module name
* component_id - Caller's component ID
*
* RETURN: None
*
* DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is
* set in debug_level
*
******************************************************************************/
void
acpi_ut_exit(u32 line_number,
const char *function_name,
const char *module_name, u32 component_id)
{
acpi_debug_print(ACPI_LV_FUNCTIONS,
line_number, function_name, module_name, component_id,
"%s\n", acpi_gbl_fn_exit_str);
acpi_gbl_nesting_level--;
}
ACPI_EXPORT_SYMBOL(acpi_ut_exit)
/*******************************************************************************
*
* FUNCTION: acpi_ut_status_exit
*
* PARAMETERS: line_number - Caller's line number
* function_name - Caller's procedure name
* module_name - Caller's module name
* component_id - Caller's component ID
* Status - Exit status code
*
* RETURN: None
*
* DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is
* set in debug_level. Prints exit status also.
*
******************************************************************************/
void
acpi_ut_status_exit(u32 line_number,
const char *function_name,
const char *module_name,
u32 component_id, acpi_status status)
{
if (ACPI_SUCCESS(status)) {
acpi_debug_print(ACPI_LV_FUNCTIONS,
line_number, function_name, module_name,
component_id, "%s %s\n", acpi_gbl_fn_exit_str,
acpi_format_exception(status));
} else {
acpi_debug_print(ACPI_LV_FUNCTIONS,
line_number, function_name, module_name,
component_id, "%s ****Exception****: %s\n",
acpi_gbl_fn_exit_str,
acpi_format_exception(status));
}
acpi_gbl_nesting_level--;
}
ACPI_EXPORT_SYMBOL(acpi_ut_status_exit)
/*******************************************************************************
*
* FUNCTION: acpi_ut_value_exit
*
* PARAMETERS: line_number - Caller's line number
* function_name - Caller's procedure name
* module_name - Caller's module name
* component_id - Caller's component ID
* Value - Value to be printed with exit msg
*
* RETURN: None
*
* DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is
* set in debug_level. Prints exit value also.
*
******************************************************************************/
void
acpi_ut_value_exit(u32 line_number,
const char *function_name,
const char *module_name,
u32 component_id, acpi_integer value)
{
acpi_debug_print(ACPI_LV_FUNCTIONS,
line_number, function_name, module_name, component_id,
"%s %8.8X%8.8X\n", acpi_gbl_fn_exit_str,
ACPI_FORMAT_UINT64(value));
acpi_gbl_nesting_level--;
}
ACPI_EXPORT_SYMBOL(acpi_ut_value_exit)
/*******************************************************************************
*
* FUNCTION: acpi_ut_ptr_exit
*
* PARAMETERS: line_number - Caller's line number
* function_name - Caller's procedure name
* module_name - Caller's module name
* component_id - Caller's component ID
* Ptr - Pointer to display
*
* RETURN: None
*
* DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is
* set in debug_level. Prints exit value also.
*
******************************************************************************/
void
acpi_ut_ptr_exit(u32 line_number,
const char *function_name,
const char *module_name, u32 component_id, u8 *ptr)
{
acpi_debug_print(ACPI_LV_FUNCTIONS,
line_number, function_name, module_name, component_id,
"%s %p\n", acpi_gbl_fn_exit_str, ptr);
acpi_gbl_nesting_level--;
}
#endif
/*******************************************************************************
*
* FUNCTION: acpi_ut_dump_buffer
*
* PARAMETERS: Buffer - Buffer to dump
* Count - Amount to dump, in bytes
* Display - BYTE, WORD, DWORD, or QWORD display
* component_iD - Caller's component ID
*
* RETURN: None
*
* DESCRIPTION: Generic dump buffer in both hex and ascii.
*
******************************************************************************/
void acpi_ut_dump_buffer2(u8 * buffer, u32 count, u32 display)
{
u32 i = 0;
u32 j;
u32 temp32;
u8 buf_char;
if (!buffer) {
acpi_os_printf("Null Buffer Pointer in DumpBuffer!\n");
return;
}
if ((count < 4) || (count & 0x01)) {
display = DB_BYTE_DISPLAY;
}
/* Nasty little dump buffer routine! */
while (i < count) {
/* Print current offset */
acpi_os_printf("%6.4X: ", i);
/* Print 16 hex chars */
for (j = 0; j < 16;) {
if (i + j >= count) {
/* Dump fill spaces */
acpi_os_printf("%*s", ((display * 2) + 1), " ");
j += display;
continue;
}
switch (display) {
case DB_BYTE_DISPLAY:
default: /* Default is BYTE display */
acpi_os_printf("%02X ",
buffer[(acpi_size) i + j]);
break;
case DB_WORD_DISPLAY:
ACPI_MOVE_16_TO_32(&temp32,
&buffer[(acpi_size) i + j]);
acpi_os_printf("%04X ", temp32);
break;
case DB_DWORD_DISPLAY:
ACPI_MOVE_32_TO_32(&temp32,
&buffer[(acpi_size) i + j]);
acpi_os_printf("%08X ", temp32);
break;
case DB_QWORD_DISPLAY:
ACPI_MOVE_32_TO_32(&temp32,
&buffer[(acpi_size) i + j]);
acpi_os_printf("%08X", temp32);
ACPI_MOVE_32_TO_32(&temp32,
&buffer[(acpi_size) i + j +
4]);
acpi_os_printf("%08X ", temp32);
break;
}
j += display;
}
/*
* Print the ASCII equivalent characters but watch out for the bad
* unprintable ones (printable chars are 0x20 through 0x7E)
*/
acpi_os_printf(" ");
for (j = 0; j < 16; j++) {
if (i + j >= count) {
acpi_os_printf("\n");
return;
}
buf_char = buffer[(acpi_size) i + j];
if (ACPI_IS_PRINT(buf_char)) {
acpi_os_printf("%c", buf_char);
} else {
acpi_os_printf(".");
}
}
/* Done with that line. */
acpi_os_printf("\n");
i += 16;
}
return;
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_dump_buffer
*
* PARAMETERS: Buffer - Buffer to dump
* Count - Amount to dump, in bytes
* Display - BYTE, WORD, DWORD, or QWORD display
* component_iD - Caller's component ID
*
* RETURN: None
*
* DESCRIPTION: Generic dump buffer in both hex and ascii.
*
******************************************************************************/
void acpi_ut_dump_buffer(u8 * buffer, u32 count, u32 display, u32 component_id)
{
/* Only dump the buffer if tracing is enabled */
if (!((ACPI_LV_TABLES & acpi_dbg_level) &&
(component_id & acpi_dbg_layer))) {
return;
}
acpi_ut_dump_buffer2(buffer, count, display);
}