Linux-2.6.33.2/drivers/net/bmac.h
/*
* mace.h - definitions for the registers in the "Big Mac"
* Ethernet controller found in PowerMac G3 models.
*
* Copyright (C) 1998 Randy Gobbel.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
/* The "Big MAC" appears to have some parts in common with the Sun "Happy Meal"
* (HME) controller. See sunhme.h
*/
/* register offsets */
/* global status and control */
#define XIFC 0x000 /* low-level interface control */
# define TxOutputEnable 0x0001 /* output driver enable */
# define XIFLoopback 0x0002 /* Loopback-mode XIF enable */
# define MIILoopback 0x0004 /* Loopback-mode MII enable */
# define MIILoopbackBits 0x0006
# define MIIBuffDisable 0x0008 /* MII receive buffer disable */
# define SQETestEnable 0x0010 /* SQE test enable */
# define SQETimeWindow 0x03e0 /* SQE time window */
# define XIFLanceMode 0x0010 /* Lance mode enable */
# define XIFLanceIPG0 0x03e0 /* Lance mode IPG0 */
#define TXFIFOCSR 0x100 /* transmit FIFO control */
# define TxFIFOEnable 0x0001
#define TXTH 0x110 /* transmit threshold */
# define TxThreshold 0x0004
#define RXFIFOCSR 0x120 /* receive FIFO control */
# define RxFIFOEnable 0x0001
#define MEMADD 0x130 /* memory address, unknown function */
#define MEMDATAHI 0x140 /* memory data high, presently unused in driver */
#define MEMDATALO 0x150 /* memory data low, presently unused in driver */
#define XCVRIF 0x160 /* transceiver interface control */
# define COLActiveLow 0x0002
# define SerialMode 0x0004
# define ClkBit 0x0008
# define LinkStatus 0x0100
#define CHIPID 0x170 /* chip ID */
#define MIFCSR 0x180 /* ??? */
#define SROMCSR 0x190 /* SROM control */
# define ChipSelect 0x0001
# define Clk 0x0002
#define TXPNTR 0x1a0 /* transmit pointer */
#define RXPNTR 0x1b0 /* receive pointer */
#define STATUS 0x200 /* status--reading this clears it */
#define INTDISABLE 0x210 /* interrupt enable/disable control */
/* bits below are the same in both STATUS and INTDISABLE registers */
# define FrameReceived 0x00000001 /* Received a frame */
# define RxFrameCntExp 0x00000002 /* Receive frame counter expired */
# define RxAlignCntExp 0x00000004 /* Align-error counter expired */
# define RxCRCCntExp 0x00000008 /* CRC-error counter expired */
# define RxLenCntExp 0x00000010 /* Length-error counter expired */
# define RxOverFlow 0x00000020 /* Receive FIFO overflow */
# define RxCodeViolation 0x00000040 /* Code-violation counter expired */
# define SQETestError 0x00000080 /* Test error in XIF for SQE */
# define FrameSent 0x00000100 /* Transmitted a frame */
# define TxUnderrun 0x00000200 /* Transmit FIFO underrun */
# define TxMaxSizeError 0x00000400 /* Max-packet size error */
# define TxNormalCollExp 0x00000800 /* Normal-collision counter expired */
# define TxExcessCollExp 0x00001000 /* Excess-collision counter expired */
# define TxLateCollExp 0x00002000 /* Late-collision counter expired */
# define TxNetworkCollExp 0x00004000 /* First-collision counter expired */
# define TxDeferTimerExp 0x00008000 /* Defer-timer expired */
# define RxFIFOToHost 0x00010000 /* Data moved from FIFO to host */
# define RxNoDescriptors 0x00020000 /* No more receive descriptors */
# define RxDMAError 0x00040000 /* Error during receive DMA */
# define RxDMALateErr 0x00080000 /* Receive DMA, data late */
# define RxParityErr 0x00100000 /* Parity error during receive DMA */
# define RxTagError 0x00200000 /* Tag error during receive DMA */
# define TxEOPError 0x00400000 /* Tx descriptor did not have EOP set */
# define MIFIntrEvent 0x00800000 /* MIF is signaling an interrupt */
# define TxHostToFIFO 0x01000000 /* Data moved from host to FIFO */
# define TxFIFOAllSent 0x02000000 /* Transmitted all packets in FIFO */
# define TxDMAError 0x04000000 /* Error during transmit DMA */
# define TxDMALateError 0x08000000 /* Late error during transmit DMA */
# define TxParityError 0x10000000 /* Parity error during transmit DMA */
# define TxTagError 0x20000000 /* Tag error during transmit DMA */
# define PIOError 0x40000000 /* PIO access got an error */
# define PIOParityError 0x80000000 /* PIO access got a parity error */
# define DisableAll 0xffffffff
# define EnableAll 0x00000000
/* # define NormalIntEvents ~(FrameReceived | FrameSent | TxUnderrun) */
# define EnableNormal ~(FrameReceived | FrameSent)
# define EnableErrors (FrameReceived | FrameSent)
# define RxErrorMask (RxFrameCntExp | RxAlignCntExp | RxCRCCntExp | \
RxLenCntExp | RxOverFlow | RxCodeViolation)
# define TxErrorMask (TxUnderrun | TxMaxSizeError | TxExcessCollExp | \
TxLateCollExp | TxNetworkCollExp | TxDeferTimerExp)
/* transmit control */
#define TXRST 0x420 /* transmit reset */
# define TxResetBit 0x0001
#define TXCFG 0x430 /* transmit configuration control*/
# define TxMACEnable 0x0001 /* output driver enable */
# define TxSlowMode 0x0020 /* enable slow mode */
# define TxIgnoreColl 0x0040 /* ignore transmit collisions */
# define TxNoFCS 0x0080 /* do not emit FCS */
# define TxNoBackoff 0x0100 /* no backoff in case of collisions */
# define TxFullDuplex 0x0200 /* enable full-duplex */
# define TxNeverGiveUp 0x0400 /* don't give up on transmits */
#define IPG1 0x440 /* Inter-packet gap 1 */
#define IPG2 0x450 /* Inter-packet gap 2 */
#define ALIMIT 0x460 /* Transmit attempt limit */
#define SLOT 0x470 /* Transmit slot time */
#define PALEN 0x480 /* Size of transmit preamble */
#define PAPAT 0x490 /* Pattern for transmit preamble */
#define TXSFD 0x4a0 /* Transmit frame delimiter */
#define JAM 0x4b0 /* Jam size */
#define TXMAX 0x4c0 /* Transmit max pkt size */
#define TXMIN 0x4d0 /* Transmit min pkt size */
#define PAREG 0x4e0 /* Count of transmit peak attempts */
#define DCNT 0x4f0 /* Transmit defer timer */
#define NCCNT 0x500 /* Transmit normal-collision counter */
#define NTCNT 0x510 /* Transmit first-collision counter */
#define EXCNT 0x520 /* Transmit excess-collision counter */
#define LTCNT 0x530 /* Transmit late-collision counter */
#define RSEED 0x540 /* Transmit random number seed */
#define TXSM 0x550 /* Transmit state machine */
/* receive control */
#define RXRST 0x620 /* receive reset */
# define RxResetValue 0x0000
#define RXCFG 0x630 /* receive configuration control */
# define RxMACEnable 0x0001 /* receiver overall enable */
# define RxCFGReserved 0x0004
# define RxPadStripEnab 0x0020 /* enable pad byte stripping */
# define RxPromiscEnable 0x0040 /* turn on promiscuous mode */
# define RxNoErrCheck 0x0080 /* disable receive error checking */
# define RxCRCNoStrip 0x0100 /* disable auto-CRC-stripping */
# define RxRejectOwnPackets 0x0200 /* don't receive our own packets */
# define RxGrpPromisck 0x0400 /* enable group promiscuous mode */
# define RxHashFilterEnable 0x0800 /* enable hash filter */
# define RxAddrFilterEnable 0x1000 /* enable address filter */
#define RXMAX 0x640 /* Max receive packet size */
#define RXMIN 0x650 /* Min receive packet size */
#define MADD2 0x660 /* our enet address, high part */
#define MADD1 0x670 /* our enet address, middle part */
#define MADD0 0x680 /* our enet address, low part */
#define FRCNT 0x690 /* receive frame counter */
#define LECNT 0x6a0 /* Receive excess length error counter */
#define AECNT 0x6b0 /* Receive misaligned error counter */
#define FECNT 0x6c0 /* Receive CRC error counter */
#define RXSM 0x6d0 /* Receive state machine */
#define RXCV 0x6e0 /* Receive code violation */
#define BHASH3 0x700 /* multicast hash register */
#define BHASH2 0x710 /* multicast hash register */
#define BHASH1 0x720 /* multicast hash register */
#define BHASH0 0x730 /* multicast hash register */
#define AFR2 0x740 /* address filtering setup? */
#define AFR1 0x750 /* address filtering setup? */
#define AFR0 0x760 /* address filtering setup? */
#define AFCR 0x770 /* address filter compare register? */
# define EnableAllCompares 0x0fff
/* bits in XIFC */