Linux-2.6.33.2/drivers/staging/winbond/localpara.h
#ifndef __WINBOND_LOCALPARA_H
#define __WINBOND_LOCALPARA_H
//=============================================================
// LocalPara.h -
//=============================================================
#include "mac_structures.h"
//Define the local ability
#define LOCAL_DEFAULT_BEACON_PERIOD 100 //ms
#define LOCAL_DEFAULT_ATIM_WINDOW 0
#define LOCAL_DEFAULT_ERP_CAPABILITY 0x0431 //0x0001: ESS
//0x0010: Privacy
//0x0020: short preamble
//0x0400: short slot time
#define LOCAL_DEFAULT_LISTEN_INTERVAL 5
//#define LOCAL_DEFAULT_24_CHANNEL_NUM 11 // channel 1..11
#define LOCAL_DEFAULT_24_CHANNEL_NUM 13 // channel 1..13
#define LOCAL_DEFAULT_5_CHANNEL_NUM 8 // channel 36..64
#define LOCAL_USA_24_CHANNEL_NUM 11
#define LOCAL_USA_5_CHANNEL_NUM 12
#define LOCAL_EUROPE_24_CHANNEL_NUM 13
#define LOCAL_EUROPE_5_CHANNEL_NUM 19
#define LOCAL_JAPAN_24_CHANNEL_NUM 14
#define LOCAL_JAPAN_5_CHANNEL_NUM 11
#define LOCAL_UNKNOWN_24_CHANNEL_NUM 14
#define LOCAL_UNKNOWN_5_CHANNEL_NUM 34 //not include 165
#define psLOCAL (&(adapter->sLocalPara))
#define MODE_802_11_BG 0
#define MODE_802_11_A 1
#define MODE_802_11_ABG 2
#define MODE_802_11_BG_IBSS 3
#define MODE_802_11_B 4
#define MODE_AUTO 255
#define BAND_TYPE_DSSS 0
#define BAND_TYPE_OFDM_24 1
#define BAND_TYPE_OFDM_5 2
//refer Bitmap2RateValue table
#define LOCAL_ALL_SUPPORTED_RATES_BITMAP 0x130c1a66 //the bitmap value of all the H/W supported rates
//1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54
#define LOCAL_OFDM_SUPPORTED_RATES_BITMAP 0x130c1240 //the bitmap value of all the H/W supported rates
//except to non-OFDM rates
//6, 9, 12, 18, 24, 36, 48, 54
#define LOCAL_11B_SUPPORTED_RATE_BITMAP 0x826
#define LOCAL_11B_BASIC_RATE_BITMAP 0x826
#define LOCAL_11B_OPERATION_RATE_BITMAP 0x826
#define LOCAL_11G_BASIC_RATE_BITMAP 0x826 //1, 2, 5.5, 11
#define LOCAL_11G_OPERATION_RATE_BITMAP 0x130c1240 //6, 9, 12, 18, 24, 36, 48, 54
#define LOCAL_11A_BASIC_RATE_BITMAP 0x01001040 //6, 12, 24
#define LOCAL_11A_OPERATION_RATE_BITMAP 0x120c0200 //9, 18, 36, 48, 54
#define PWR_ACTIVE 0
#define PWR_SAVE 1
#define PWR_TX_IDLE_CYCLE 6
//bPreambleMode and bSlotTimeMode
#define AUTO_MODE 0
#define LONG_MODE 1
//Region definition
#define REGION_AUTO 0xff
#define REGION_UNKNOWN 0
#define REGION_EUROPE 1 //ETSI
#define REGION_JAPAN 2 //MKK
#define REGION_USA 3 //FCC
#define REGION_FRANCE 4 //FRANCE
#define REGION_SPAIN 5 //SPAIN
#define REGION_ISRAEL 6 //ISRAEL
//#define REGION_CANADA 7 //IC
#define MAX_BSS_DESCRIPT_ELEMENT 32
#define MAX_PMKID_CandidateList 16
//High byte : Event number, low byte : reason
//Event definition
//-- SME/MLME event
#define EVENT_RCV_DEAUTH 0x0100
#define EVENT_JOIN_FAIL 0x0200
#define EVENT_AUTH_FAIL 0x0300
#define EVENT_ASSOC_FAIL 0x0400
#define EVENT_LOST_SIGNAL 0x0500
#define EVENT_BSS_DESCRIPT_LACK 0x0600
#define EVENT_COUNTERMEASURE 0x0700
#define EVENT_JOIN_FILTER 0x0800
//-- TX/RX event
#define EVENT_RX_BUFF_UNAVAILABLE 0x4100
#define EVENT_CONNECT 0x8100
#define EVENT_DISCONNECT 0x8200
#define EVENT_SCAN_REQ 0x8300
//Reason of Event
#define EVENT_REASON_FILTER_BASIC_RATE 0x0001
#define EVENT_REASON_FILTER_PRIVACY 0x0002
#define EVENT_REASON_FILTER_AUTH_MODE 0x0003
#define EVENT_REASON_TIMEOUT 0x00ff
// 20061108 WPS IE buffer
#define MAX_IE_APPEND_SIZE 256 + 4 // Due to [E id][Length][OUI][Data] may 257 bytes
typedef struct _EVENTLOG
{
u16 Count; //Total count from start
u16 index; //Buffer index, 0 ~ 63
u32 EventValue[64]; //BYTE 3~2 : count, BYTE 1 : Event, BYTE 0 : reason
} Event_Log, *pEvent_Log;
typedef struct _ChanInfo
{
u8 band;
u8 ChanNo;
} ChanInfo, *pChanInfo;
typedef struct _CHAN_LIST
{
u16 Count;
ChanInfo Channel[50]; // 100B
} CHAN_LIST, *psCHAN_LIST;
typedef struct _RadioOff
{
u8 boHwRadioOff;
u8 boSwRadioOff;
} RadioOff, *psRadioOff;
//===========================================================================
typedef struct LOCAL_PARA
{
u8 PermanentAddress[ MAC_ADDR_LENGTH + 2 ]; // read from EPROM, manufacture set for each NetCard
u8 ThisMacAddress[ MAC_ADDR_LENGTH + 2 ]; // the driver will use actually.
u32 MTUsize; // Ind to Uplayer, Max transmission unit size
u8 region_INF; //region setting from INF
u8 region; //real region setting of the device
u8 Reserved_1[2];
//// power-save variables
u8 iPowerSaveMode; // 0 indicates it is on, 1 indicates it is off
u8 ATIMmode;
u8 ExcludeUnencrypted;
u16 CheckCountForPS; //Unit ime count for the decision to enter PS mode
u8 boHasTxActivity; //tx activity has occurred
u8 boMacPsValid; //Power save mode obtained from H/W is valid or not
//// Rate
u8 TxRateMode; // Initial, input from Registry, may be updated by GUI
//Tx Rate Mode: auto(DTO on), max, 1M, 2M, ..
u8 CurrentTxRate; // The current Tx rate
u8 CurrentTxRateForMng; // The current Tx rate for management frames
// It will be decided before connection succeeds.
u8 CurrentTxFallbackRate;
//for Rate handler
u8 BRateSet[32]; //basic rate set
u8 SRateSet[32]; //support rate set
u8 NumOfBRate;
u8 NumOfSRate;
u8 NumOfDsssRateInSRate; //number of DSSS rates in supported rate set
u8 reserved1;
u32 dwBasicRateBitmap; //bit map of basic rates
u32 dwSupportRateBitmap; //bit map of all support rates including
//basic and operational rates
////For SME/MLME handler
u16 wOldSTAindex; // valid when boHandover=TRUE, store old connected STA index
u16 wConnectedSTAindex; // Index of peerly connected AP or IBSS in
// the descriptionset.
u16 Association_ID; // The Association ID in the (Re)Association
// Response frame.
u16 ListenInterval; // The listen interval when SME invoking MLME_
// (Re)Associate_Request().
RadioOff RadioOffStatus;
u8 Reserved0[2];
u8 boMsRadioOff; // Ndis demands to be true when set Disassoc. OID and be false when set SSID OID.
u8 bAntennaNo; //which antenna
u8 bConnectFlag; //the connect status flag for roaming task
u8 RoamStatus;
u8 reserved7[3];
ChanInfo CurrentChan; //Current channel no. and channel band. It may be changed by scanning.
u8 boHandover; // Roaming, Hnadover to other AP.
u8 boCCAbusy;
u16 CWMax; // It may not be the real value that H/W used
u8 CWMin; // 255: set according to 802.11 spec.
u8 reserved2;
//11G:
u8 bMacOperationMode; // operation in 802.11b or 802.11g
u8 bSlotTimeMode; //AUTO, s32
u8 bPreambleMode; //AUTO, s32
u8 boNonERPpresent;
u8 boProtectMechanism; // H/W will take the necessary action based on this variable
u8 boShortPreamble; // H/W will take the necessary action based on this variable
u8 boShortSlotTime; // H/W will take the necessary action based on this variable
u8 reserved_3;
u32 RSN_IE_Bitmap; //added by WS
u32 RSN_OUI_Type; //added by WS
//For the BSSID
u8 HwBssid[MAC_ADDR_LENGTH + 2];
u32 HwBssidValid;
//For scan list
u8 BssListCount; //Total count of valid descriptor indexes
u8 boReceiveUncorrectInfo; //important settings in beacon/probe resp. have been changed
u8 NoOfJoinerInIbss;
u8 reserved_4;
u8 BssListIndex[ (MAX_BSS_DESCRIPT_ELEMENT+3) & ~0x03 ]; //Store the valid descriptor indexes obtained from scannings
u8 JoinerInIbss[ (MAX_BSS_DESCRIPT_ELEMENT+3) & ~0x03 ]; //save the BssDescriptor index in this
//IBSS. The index 0 is local descriptor
//(psLOCAL->wConnectedSTAindex).
//If CONNECTED : NoOfJoinerInIbss >=2
// else : NoOfJoinerInIbss <=1
//// General Statistics, count at Rx_handler or Tx_callback interrupt handler
u64 GS_XMIT_OK; // Good Frames Transmitted
u64 GS_RCV_OK; // Good Frames Received
u32 GS_RCV_ERROR; // Frames received with crc error
u32 GS_XMIT_ERROR; // Bad Frames Transmitted
u32 GS_RCV_NO_BUFFER; // Receive Buffer underrun
u32 GS_XMIT_ONE_COLLISION; // one collision
u32 GS_XMIT_MORE_COLLISIONS;// more collisions
//================================================================
// Statistics (no matter whether it had done successfully) -wkchen
//================================================================
u32 _NumRxMSDU;
u32 _NumTxMSDU;
u32 _dot11WEPExcludedCount;
u32 _dot11WEPUndecryptableCount;
u32 _dot11FrameDuplicateCount;
ChanInfo IbssChanSetting; // 2B. Start IBSS Channel setting by registry or WWU.
u8 reserved_5[2]; //It may not be used after considering RF type,
//region and modulation type.
CHAN_LIST sSupportChanList; // 86B. It will be obtained according to RF type and region
u8 reserved_6[2]; //two variables are for wep key error detection added by ws 02/02/04
u32 bWepKeyError;
u32 bToSelfPacketReceived;
u32 WepKeyDetectTimerCount;
Event_Log EventLog;
u16 SignalLostTh;
u16 SignalRoamTh;
// 20061108 WPS IE Append
u8 IE_Append_data[MAX_IE_APPEND_SIZE];
u16 IE_Append_size;
u16 reserved_7;
} WB_LOCALDESCRIPT, *PWB_LOCALDESCRIPT;
#endif