Linux-2.6.33.2/drivers/staging/winbond/wb35reg_s.h
#ifndef __WINBOND_WB35REG_S_H
#define __WINBOND_WB35REG_S_H
#include <linux/spinlock.h>
#include <linux/types.h>
#include <asm/atomic.h>
//=======================================================================================
/*
HAL setting function
========================================
|Uxx| |Dxx| |Mxx| |BB| |RF|
========================================
| |
Wb35Reg_Read Wb35Reg_Write
----------------------------------------
WbUsb_CallUSBDASync supplied By WbUsb module
*/
//=======================================================================================
#define GetBit( dwData, i) ( dwData & (0x00000001 << i))
#define SetBit( dwData, i) ( dwData | (0x00000001 << i))
#define ClearBit( dwData, i) ( dwData & ~(0x00000001 << i))
#define IGNORE_INCREMENT 0
#define AUTO_INCREMENT 0
#define NO_INCREMENT 1
#define REG_DIRECTION(_x,_y) ((_y)->DIRECT ==0 ? usb_rcvctrlpipe(_x,0) : usb_sndctrlpipe(_x,0))
#define REG_BUF_SIZE(_x) ((_x)->bRequest== 0x04 ? cpu_to_le16((_x)->wLength) : 4)
// 20060613.2 Add the follow definition
#define BB48_DEFAULT_AL2230_11B 0x0033447c
#define BB4C_DEFAULT_AL2230_11B 0x0A00FEFF
#define BB48_DEFAULT_AL2230_11G 0x00332C1B
#define BB4C_DEFAULT_AL2230_11G 0x0A00FEFF
#define BB48_DEFAULT_WB242_11B 0x00292315 //backoff 2dB
#define BB4C_DEFAULT_WB242_11B 0x0800FEFF //backoff 2dB
//#define BB48_DEFAULT_WB242_11B 0x00201B11 //backoff 4dB
//#define BB4C_DEFAULT_WB242_11B 0x0600FF00 //backoff 4dB
#define BB48_DEFAULT_WB242_11G 0x00453B24
#define BB4C_DEFAULT_WB242_11G 0x0E00FEFF
//====================================
// Default setting for Mxx
//====================================
#define DEFAULT_CWMIN 31 //(M2C) CWmin. Its value is in the range 0-31.
#define DEFAULT_CWMAX 1023 //(M2C) CWmax. Its value is in the range 0-1023.
#define DEFAULT_AID 1 //(M34) AID. Its value is in the range 1-2007.
#ifdef _USE_FALLBACK_RATE_
#define DEFAULT_RATE_RETRY_LIMIT 2 //(M38) as named
#else
#define DEFAULT_RATE_RETRY_LIMIT 7 //(M38) as named
#endif
#define DEFAULT_LONG_RETRY_LIMIT 7 //(M38) LongRetryLimit. Its value is in the range 0-15.
#define DEFAULT_SHORT_RETRY_LIMIT 7 //(M38) ShortRetryLimit. Its value is in the range 0-15.
#define DEFAULT_PIFST 25 //(M3C) PIFS Time. Its value is in the range 0-65535.
#define DEFAULT_EIFST 354 //(M3C) EIFS Time. Its value is in the range 0-1048575.
#define DEFAULT_DIFST 45 //(M3C) DIFS Time. Its value is in the range 0-65535.
#define DEFAULT_SIFST 5 //(M3C) SIFS Time. Its value is in the range 0-65535.
#define DEFAULT_OSIFST 10 //(M3C) Original SIFS Time. Its value is in the range 0-15.
#define DEFAULT_ATIMWD 0 //(M40) ATIM Window. Its value is in the range 0-65535.
#define DEFAULT_SLOT_TIME 20 //(M40) ($) SlotTime. Its value is in the range 0-255.
#define DEFAULT_MAX_TX_MSDU_LIFE_TIME 512 //(M44) MaxTxMSDULifeTime. Its value is in the range 0-4294967295.
#define DEFAULT_BEACON_INTERVAL 500 //(M48) Beacon Interval. Its value is in the range 0-65535.
#define DEFAULT_PROBE_DELAY_TIME 200 //(M48) Probe Delay Time. Its value is in the range 0-65535.
#define DEFAULT_PROTOCOL_VERSION 0 //(M4C)
#define DEFAULT_MAC_POWER_STATE 2 //(M4C) 2: MAC at power active
#define DEFAULT_DTIM_ALERT_TIME 0
struct wb35_reg_queue {
struct urb *urb;
void *pUsbReq;
void *Next;
union {
u32 VALUE;
u32 *pBuffer;
};
u8 RESERVED[4]; // space reserved for communication
u16 INDEX; // For storing the register index
u8 RESERVED_VALID; // Indicate whether the RESERVED space is valid at this command.
u8 DIRECT; // 0:In 1:Out
};
//====================================
// Internal variable for module
//====================================
#define MAX_SQ3_FILTER_SIZE 5
struct wb35_reg {
//============================
// Register Bank backup
//============================
u32 U1B0; //bit16 record the h/w radio on/off status
u32 U1BC_LEDConfigure;
u32 D00_DmaControl;
u32 M00_MacControl;
union {
struct {
u32 M04_MulticastAddress1;
u32 M08_MulticastAddress2;
};
u8 Multicast[8]; // contents of card multicast registers
};
u32 M24_MacControl;
u32 M28_MacControl;
u32 M2C_MacControl;
u32 M38_MacControl;
u32 M3C_MacControl; // 20060214 backup only
u32 M40_MacControl;
u32 M44_MacControl; // 20060214 backup only
u32 M48_MacControl; // 20060214 backup only
u32 M4C_MacStatus;
u32 M60_MacControl; // 20060214 backup only
u32 M68_MacControl; // 20060214 backup only
u32 M70_MacControl; // 20060214 backup only
u32 M74_MacControl; // 20060214 backup only
u32 M78_ERPInformation;//930206.2.b
u32 M7C_MacControl; // 20060214 backup only
u32 M80_MacControl; // 20060214 backup only
u32 M84_MacControl; // 20060214 backup only
u32 M88_MacControl; // 20060214 backup only
u32 M98_MacControl; // 20060214 backup only
//[20040722 WK]
//Baseband register
u32 BB0C; // Used for LNA calculation
u32 BB2C; //
u32 BB30; //11b acquisition control register
u32 BB3C;
u32 BB48; // 20051221.1.a 20060613.1 Fix OBW issue of 11b/11g rate
u32 BB4C; // 20060613.1 Fix OBW issue of 11b/11g rate
u32 BB50; //mode control register
u32 BB54;
u32 BB58; //IQ_ALPHA
u32 BB5C; // For test
u32 BB60; // for WTO read value
//-------------------
// VM
//-------------------
spinlock_t EP0VM_spin_lock; // 4B
u32 EP0VM_status;//$$
struct wb35_reg_queue *reg_first;
struct wb35_reg_queue *reg_last;
atomic_t RegFireCount;
// Hardware status
u8 EP0vm_state;
u8 mac_power_save;
u8 EEPROMPhyType; // 0 ~ 15 for Maxim (0 ĄV MAX2825, 1 ĄV MAX2827, 2 ĄV MAX2828, 3 ĄV MAX2829),
// 16 ~ 31 for Airoha (16 ĄV AL2230, 11 - AL7230)
// 32 ~ Reserved
// 33 ~ 47 For WB242 ( 33 - WB242, 34 - WB242 with new Txvga 0.5 db step)
// 48 ~ 255 ARE RESERVED.
u8 EEPROMRegion; //Region setting in EEPROM
u32 SyncIoPause; // If user use the Sync Io to access Hw, then pause the async access
u8 LNAValue[4]; //Table for speed up running
u32 SQ3_filter[MAX_SQ3_FILTER_SIZE];
u32 SQ3_index;
};
#endif