Linux-2.6.33.2/drivers/staging/wlags49_h2/hcfcfg.h
// vim:tw=110:ts=4:
#ifndef HCFCFG_H
#define HCFCFG_H 1
/*************************************************************************************************************
*
* FILE : hcfcfg.tpl // hcfcfg.h
*
* DATE : $Date: 2004/08/05 11:47:10 $ $Revision: 1.6 $
* Original: 2004/04/08 15:18:16 Revision: 1.40 Tag: t20040408_01
* Original: 2004/04/01 15:32:55 Revision: 1.38 Tag: t7_20040401_01
* Original: 2004/03/10 15:39:28 Revision: 1.34 Tag: t20040310_01
* Original: 2004/03/03 14:10:12 Revision: 1.32 Tag: t20040304_01
* Original: 2004/03/02 09:27:12 Revision: 1.30 Tag: t20040302_03
* Original: 2004/02/24 13:00:28 Revision: 1.25 Tag: t20040224_01
* Original: 2004/02/18 17:13:57 Revision: 1.23 Tag: t20040219_01
*
* AUTHOR : Nico Valster
*
* DESC : HCF Customization Macros
* hcfcfg.tpl list all #defines which must be specified to:
* adjust the HCF functions defined in HCF.C to the characteristics of a specific environment
* o maximum sizes for messages
* o Endianess
* Compiler specific macros
* o port I/O macros
* o type definitions
*
* By copying HCFCFG.TPL to HCFCFG.H and -if needed- modifying the #defines the WCI functionality can be
* tailored
*
* Supported environments:
* WVLAN_41 Miniport NDIS 3.1
* WVLAN_42 Packet Microsoft Visual C 1.5
* WVLAN_43 16 bits DOS ODI Microsoft Visual C 1.5
* WVLAN_44 32 bits ODI (__NETWARE_386__) WATCOM
* WVLAN_45 MAC_OS MPW?, Symantec?
* WVLAN_46 Windows CE (_WIN32_WCE) Microsoft ?
* WVLAN_47 LINUX (__LINUX__) GCC, discarded, based on GPL'ed HCF-light
* WVLAN_48 Miniport NDIS 5
* WVLAN_49 LINUX (__LINUX__) GCC, originally based on pre-compiled HCF_library
* migrated to use the HCF sources when Lucent Technologies
* brought the HCF module under GPL
* WVLAN_51 Miniport USB NDIS 5
* WVLAN_52 Miniport NDIS 4
* WVLAN_53 VxWorks END Station driver
* WVLAN_54 VxWorks END Access Point driver
* WVLAN_81 WavePoint BORLAND C
* WCITST Inhouse test tool Microsoft Visual C 1.5
* WSU WaveLAN Station Update Microsoft Visual C ??
* SCO UNIX not yet actually used ? ?
* __ppc OEM supplied ?
* _AM29K OEM supplied ?
* ? OEM supplied Microtec Research 80X86 Compiler
*
**************************************************************************************************************
*
*
* SOFTWARE LICENSE
*
* This software is provided subject to the following terms and conditions,
* which you should read carefully before using the software. Using this
* software indicates your acceptance of these terms and conditions. If you do
* not agree with these terms and conditions, do not use the software.
*
* COPYRIGHT © 1994 - 1995 by AT&T. All Rights Reserved
* COPYRIGHT © 1996 - 2000 by Lucent Technologies. All Rights Reserved
* COPYRIGHT © 2001 - 2004 by Agere Systems Inc. All Rights Reserved
* All rights reserved.
*
* Redistribution and use in source or binary forms, with or without
* modifications, are permitted provided that the following conditions are met:
*
* . Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following Disclaimer as comments in the code as
* well as in the documentation and/or other materials provided with the
* distribution.
*
* . Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following Disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* . Neither the name of Agere Systems Inc. nor the names of the contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* Disclaimer
*
* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
* INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
* USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
* RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
* DAMAGE.
*
*
*************************************************************************************************************/
/* Alignment
* Some platforms can access words on odd boundaries (with possibly an performance impact), at other
* platforms such an access may result in a memory access violation.
* It is assumed that everywhere where the HCF casts a char pointer into a word pointer, the alignment
* criteria are met. This put some restrictions on the MSF, which are assumed to be "automatically" fulfilled
* at the applicable platforms
* To assert this assumption, the macro HCF_ALIGN can be defined. The default value is 1, meaning byte
* alignment (or no alignment), a value of 2 means word alignment, a value of 4 means double word alignment
*/
/***************************** IN_PORT_STRING_8_16 S a m p l e s *****************************************
// C implementation which let the processor handle the word-at-byte-boundary problem
#define IN_PORT_STRING_8_16( port, addr, n) while ( n-- ) \
{ *(hcf_16 FAR*)addr = IN_PORT_WORD( port ); ((hcf_8 FAR*)addr)+=2; }
// C implementation which handles the word-at-byte-boundary problem
#define IN_PORT_STRING_8_16( port, addr, n) while ( n-- ) \
{ hcf_16 i = IN_PORT_WORD(port); *((hcf_8 FAR*)addr)++ = (hcf_8)i; *((hcf_8 FAR*)addr)++ = (hcf_8)(i>>8);}
// Assembler implementation
#define IN_PORT_STRING_8_16( port, addr, len) __asm \
{ \
__asm push di \
__asm push es \
__asm mov cx,len \
__asm les di,addr \
__asm mov dx,port \
__asm rep insw \
__asm pop es \
__asm pop di \
}
***************************** OUT_PORT_STRING_8_16 S a m p l e s ******************************************
// C implementation which let the processor handle the word-at-byte-boundary problem
#define OUT_PORT_STRING_8_16( port, addr, n) while ( n-- ) \
{ OUT_PORT_WORD( port, *(hcf_16 FAR*)addr ) ; ((hcf_8 FAR*)addr)+=2; }
// C implementation which handles the word-at-byte-boundary problem
#define OUT_PORT_STRING_8_16( port, addr, n) while ( n-- ) \
{ OUT_PORT_WORD( port, *((hcf_8 FAR*)addr) | *(((hcf_8 FAR*)addr)+1)<<8 ); (hcf_8 FAR*)addr+=2; }
// Assembler implementation
#define OUT_PORT_STRING_8_16( port, addr, len) __asm \
{ \
__asm push si \
__asm push ds \
__asm mov cx,len \
__asm lds si,addr \
__asm mov dx,port \
__asm rep outsw \
__asm pop ds \
__asm pop si \
}
*************************************************************************************************************/
/************************************************************************************************/
/****************** C O M P I L E R S P E C I F I C M A C R O S ***************************/
/************************************************************************************************/
/*************************************************************************************************
*
* !!!!!!!!!!!!!!!!!!!!!!!!! Note to the HCF-implementor !!!!!!!!!!!!!!!!!!!!!!!!!
* !!!! Do not call these macros with parameters which introduce side effects !!!!
* !!!!!!!!!!!!!!!!!!!!!!!!! Note to the HCF-implementor !!!!!!!!!!!!!!!!!!!!!!!!!
*
*
* By selecting the appropriate Macro definitions by means of modifying the "#ifdef 0/1" lines, the HCF can be
* adjusted for the I/O characteristics of a specific compiler
*
* If needed the macros can be modified or replaced with definitions appropriate for your personal platform.
* If you need to make such changes it is appreciated if you inform Agere Systems
* That way the changes can become part of the next release of the WCI
*
* For convenience of the MSF-programmer, all macros are allowed to modify their parameters (although some
* might argue that this would constitute bad coding practice). This has its implications on the HCF, e.g. as a
* consequence these macros should not be called with parameters which have side effects, e.g auto-increment.
*
* in the Microsoft implementation of inline assembly it is O.K. to corrupt all flags except the direction flag
* and to corrupt all registers except the segment registers and EDI, ESI, ESP and EBP (or their 16 bits
* equivalents). Other environments may have other constraints
*
* in the Intel environment it is O.K to have a word (as a 16 bits quantity) at a byte boundary, hence
* IN_/OUT_PORT_STRING_8_16 can move words between PC-memory and NIC-memory with as only constraint that the
* words are on a word boundary in NIC-memory. This does not hold true for all conceivable environments, e.g.
* an Motorola 68xxx does not allow this. Probably/hopefully the boundary conditions imposed by these type of
* platforms prevent this case from materializing. If this is not the case, OUT_PORT_STRING_8_16 must be coded
* by combining two Host memory hcf_8 values at a time to a single hcf_16 value to be passed to the NIC and
* IN_PORT_STRING_8_16 the single hcf_16 retrieved from the NIC must be split in two hcf_8 values to be stored
* in Host memory (see the sample code above)
*
* The prototypes and functional description of the macros are:
*
* hcf_16 IN_PORT_WORD( hcf_16 port )
* Reads a word (16 bits) from the specified port
*
* void OUT_PORT_WORD( hcf_16 port, hcf_16 value)
* Writes a word (16 bits) to the specified port
*
* hcf_16 IN_PORT_DWORD( hcf_16 port )
* Reads a dword (32 bits) from the specified port
*
* void OUT_PORT_DWORD( hcf_16 port, hcf_32 value)
* Writes a dword (32 bits) to the specified port
*
* void IN_PORT_STRING_8_16( port, addr, len)
* Reads len number of words (16 bits) from NIC memory via the specified port to the (FAR)
* byte-pointer addr in PC-RAM
* Note that len specifies the number of words, NOT the number of bytes
* !!!NOTE, although len specifies the number of words, addr MUST be a char pointer NOTE!!!
* See also the common notes for IN_PORT_STRING_8_16 and OUT_PORT_STRING_8_16
*
* void OUT_PORT_STRING_8_16( port, addr, len)
* Writes len number of words (16 bits) from the (FAR) byte-pointer addr in PC-RAM via the specified
* port to NIC memory
* Note that len specifies the number of words, NOT the number of bytes.
* !!!NOTE, although len specifies the number of words, addr MUST be a char pointer NOTE!!!
*
* The peculiar combination of word-length and char pointers for IN_PORT_STRING_8_16 as well as
* OUT_PORT_STRING_8_16 is justified by the assumption that it offers a more optimal algorithm
*
* void IN_PORT_STRING_32( port, addr, len)
* Reads len number of double-words (32 bits) from NIC memory via the specified port to the (FAR)
* double-word address addr in PC-RAM
*
* void OUT_PORT_STRING_32( port, addr, len)
* Writes len number of double-words (32 bits) from the (FAR) double-word address addr in PC-RAM via
* the specified port to NIC memory
*
* !!!!!!!!!!!!!!!!!!!!!!!!! Note to the HCF-implementor !!!!!!!!!!!!!!!!!!!!!!!!!
* !!!! Do not call these macros with parameters which introduce side effects !!!!
* !!!!!!!!!!!!!!!!!!!!!!!!! Note to the HCF-implementor !!!!!!!!!!!!!!!!!!!!!!!!!
*
*************************************************************************************************/
/**************************** define INT Types ******************************/
typedef unsigned char hcf_8;
typedef unsigned short hcf_16;
typedef unsigned long hcf_32;
/**************************** define I/O Types ******************************/
#define HCF_IO_MEM 0x0001 // memory mapped I/O ( 0: Port I/O )
#define HCF_IO_32BITS 0x0002 // 32Bits support ( 0: only 16 Bits I/O)
/****************************** #define HCF_TYPE ********************************/
#define HCF_TYPE_NONE 0x0000 // No type
#define HCF_TYPE_WPA 0x0001 // WPA support
#define HCF_TYPE_USB 0x0002 // reserved (USB Dongle driver support)
//#define HCF_TYPE_HII 0x0004 // Hermes-II, to discriminate H-I and H-II CFG_HCF_OPT_STRCT
#define HCF_TYPE_WARP 0x0008 // WARP F/W
#define HCF_TYPE_PRELOADED 0x0040 // pre-loaded F/W
#define HCF_TYPE_HII5 0x0080 // Hermes-2.5 H/W
#define HCF_TYPE_CCX 0x0100 // CKIP
#define HCF_TYPE_BEAGLE_HII5 0x0200 // Beagle Hermes-2.5 H/W
#define HCF_TYPE_TX_DELAY 0x4000 // Delayed transmission ( non-DMA only)
/****************************** #define HCF_ASSERT ******************************/
#define HCF_ASSERT_NONE 0x0000 // No assert support
#define HCF_ASSERT_PRINTF 0x0001 // Hermes generated debug info
#define HCF_ASSERT_SW_SUP 0x0002 // logging via Hermes support register
#define HCF_ASSERT_MB 0x0004 // logging via Mailbox
#define HCF_ASSERT_RT_MSF_RTN 0x4000 // dynamically binding of msf_assert routine
#define HCF_ASSERT_LNK_MSF_RTN 0x8000 // statically binding of msf_assert routine
/****************************** #define HCF_ENCAP *******************************/
#define HCF_ENC_NONE 0x0000 // No encapsulation support
#define HCF_ENC 0x0001 // HCF handles En-/Decapsulation
#define HCF_ENC_SUP 0x0002 // HCF supports MSF to handle En-/Decapsulation
/****************************** #define HCF_EXT *********************************/
#define HCF_EXT_NONE 0x0000 // No expanded features
#define HCF_EXT_INFO_LOG 0x0001 // logging of Hermes Info frames
//#define HCF_EXT_INT_TX_OK 0x0002 // RESERVED!!! monitoring successful Tx message
#define HCF_EXT_INT_TX_EX 0x0004 // monitoring unsuccessful Tx message
//#define HCF_EXT_MON_MODE 0x0008 // LEGACY
#define HCF_EXT_TALLIES_FW 0x0010 // support for up to 32 Hermes Engineering tallies
#define HCF_EXT_TALLIES_HCF 0x0020 // support for up to 8 HCF Engineering tallies
#define HCF_EXT_NIC_ACCESS 0x0040 // direct access via Aux-ports and to Hermes registers and commands
#define HCF_EXT_MB 0x0080 // MailBox code expanded
#define HCF_EXT_IFB_STRCT 0x0100 // MSF custom pointer in IFB
#define HCF_EXT_DESC_STRCT 0x0200 // MSF custom pointer in Descriptor
#define HCF_EXT_TX_CONT 0x4000 // Continuous transmit test
#define HCF_EXT_INT_TICK 0x8000 // enables TimerTick interrupt generation
/****************************** #define HCF_SLEEP *******************************/
#define HCF_DDS 0x0001 // Disconnected Deep Sleep
#define HCF_CDS 0x0002 // Connected Deep Sleep
/****************************** #define HCF_TALLIES ******************************/
#define HCF_TALLIES_NONE 0x0000 // No tally support
#define HCF_TALLIES_NIC 0x0001 // Hermes Tallies accumulated in IFB
#define HCF_TALLIES_HCF 0x0002 // HCF Tallies accumulated in IFB
#define HCF_TALLIES_RESET 0x8000 // Tallies in IFB are reset when reported via hcf_get_info
/************************************************************************************************/
/****************************** M I N I P O R T N D I S *************************************/
/************************************************************************************************/
#if defined WVLAN_41 || defined WVLAN_48 || defined WVLAN_52 || defined _WIN32_WCE
#ifndef WVLAN_46
#define HCF_EXT (HCF_EXT_INFO_LOG | HCF_EXT_MB | HCF_EXT_NIC_ACCESS )
#else
#define HCF_EXT ( HCF_EXT_TX_CONT | HCF_EXT_INFO_LOG | HCF_EXT_MB | HCF_EXT_NIC_ACCESS )
#endif
#define HCF_DLV 1 //H-I legacy, superfluous for H-II
#ifdef _WIN32_WCE
#define HCF_IO HCF_IO_MEM
#define HCF_DMA 0 // To enable DMA
#endif
#if _VARIANT == 7
#define HCF_SLEEP HCF_CDS
#endif // _VARIANT == 7
#if _VARIANT == 5 || _VARIANT == 6
#define _WARP
#define _AES
#define HCF_SLEEP HCF_CDS
#if _VARIANT == 6
//! #define _RSN
#endif // _VARIANT == 6
#ifndef _WIN32_WCE
#define HCF_IO HCF_IO_32BITS
#define HCF_DMA 1 // To enable DMA
#endif
#endif // _VARIANT == 5 || _VARIANT == 6
//HWi for migration purposes I defined a define which will be TRUE for ALL drivers
//Meaning that _CCX defined code which we think will get a all driver OK flag can be defined from _CCX to _CCX_OK
#if defined WVLAN_48 // && !defined _WIN32_WCE
#if _VARIANT == 4 || _VARIANT == 6
#define _CCX_OK 1
#endif // _VARIANT == 4 || _VARIANT == 6
#endif // WVLAN_48
//#if !defined WVLAN_46
#if defined WVLAN_48
#if _VARIANT == 4 || _VARIANT == 6
#define _CCX
#define HCF_MAX_MSG_CKIP_PADDING 86 //, use 86 for rx fragmentation. 28 is enuf for MIC+PPK encapsulation
#define HCF_MAX_MSG ( 1514 + HCF_MAX_MSG_CKIP_PADDING ) // need extra padding for CKIP (need to subtract 28 for NDIS)
#endif // _VARIANT == 4 || _VARIANT == 6
#endif // WVLAN_48
//#endif // WVLAN_46
#if !defined WVLAN_46
#define _PEEK
#endif
#ifndef _WIN32_WCE
// ASSERT already used by WinCE...
#ifdef ASSERT
#undef ASSERT
#define ASSERT(x) ASSERTDEBUGMSG((x), (TEXT("SIMULATE ASSERT:")))
#endif
#endif
#if defined WVLAN_41
#define MSF_COMPONENT_ID COMP_ID_MINIPORT_NDIS_31
#endif // WVLAN_41
#if defined WVLAN_48 && !defined _WIN32_WCE
#define MSF_COMPONENT_ID COMP_ID_MINIPORT_NDIS_50
#endif // WVLAN_48 / _WIN32_WCE
#if defined WVLAN_52 && !defined _WIN32_WCE
#define MSF_COMPONENT_ID COMP_ID_MINIPORT_NDIS_40
#endif // WVLAN_52 / _WIN32_WCE
#if defined WVLAN_46
#define MSF_COMPONENT_ID COMP_ID_WIN_CE
#endif // _WIN32_WCE
#define MSF_COMPONENT_VAR _VARIANT
#define T1__HCF_TYPE (HCF_TYPE_NONE)
#define T2__HCF_TYPE (T1__HCF_TYPE)
#ifdef _WARP
#define T3__HCF_TYPE (T2__HCF_TYPE | HCF_TYPE_HII5 | HCF_TYPE_WARP )
#else
#if _VARIANT == 7
#define T3__HCF_TYPE (T2__HCF_TYPE | HCF_TYPE_HII5)
#else // _VARIANT == 7
#define T3__HCF_TYPE (T2__HCF_TYPE)
#endif // _VARIANT == 7
#endif // _WARP
#ifdef _CCX_OK
#define T4__HCF_TYPE (T3__HCF_TYPE | HCF_TYPE_CCX)
#else
#define T4__HCF_TYPE (T3__HCF_TYPE)
#endif // _CCX_OK
//not suitable for H-II #define HCF_CFG_STA_1_BOTTOM 16
// Default WPA in ON for all drivers except for WARP driver
#ifdef _WARP
#define T5__HCF_TYPE (T4__HCF_TYPE)
#else // _WARP
#define T5__HCF_TYPE (T4__HCF_TYPE | HCF_TYPE_WPA)
#endif // _WARP
#define HCF_TYPE (T5__HCF_TYPE)
// This is needed to get aux_ctrl() from the HCF for WlFreezeAndDump()
#if (defined DBG && DBG != 0)
#ifndef STATIC
#define STATIC
#endif
#endif
#if !defined SOFTRONICS_CODE && !defined _APIDLL && !defined _WIN32_WCE
#include <ndis.h>
#endif // SOFTRONICS_CODE / _APIDLL / _WIN32_WCE
#if defined _WIN32_WCE
#include <windows.h>
#include <winnt.h>
#endif // _WIN32_WCE
#include "version.h"
#define MSF_COMPONENT_MAJOR_VER TPI_MAJOR_VERSION
#define MSF_COMPONENT_MINOR_VER TPI_MINOR_VERSION
#if !defined _APIDLL && !defined _WIN32_WCE
__inline UCHAR NDIS_IN_BYTE( ULONG port )
{
UCHAR value;
NdisRawReadPortUchar(port , &value);
return (value);
}
__inline ULONG NDIS_IN_LONG( ULONG port )
{
ULONG value;
NdisRawReadPortUlong(port , &value);
return (value);
}
__inline USHORT NDIS_IN_WORD( ULONG port )
{
USHORT value;
NdisRawReadPortUshort(port , &value);
return (value);
}
#define IN_PORT_DWORD(port) NDIS_IN_LONG( (ULONG) (port) )
#define IN_PORT_WORD(port) NDIS_IN_WORD( (ULONG) (port) )
#define OUT_PORT_DWORD(port, value) NdisRawWritePortUlong((ULONG) (port) , value)
#define OUT_PORT_WORD(port, value) NdisRawWritePortUshort((ULONG) (port) , (USHORT) (value))
#define IN_PORT_STRING_8_16(port, addr, len) IN_PORT_STRING_16(port, addr, len)
#define OUT_PORT_STRING_8_16(port, addr, len) OUT_PORT_STRING_16(port, addr, len)
#define IN_PORT_STRING_32(port, addr, len) { \
NdisRawReadPortBufferUlong(port, addr, (len)); \
}
#define OUT_PORT_STRING_32(port, addr, len) { \
NdisRawWritePortBufferUlong(port, addr, (len)); \
}
#define IN_PORT_STRING_16(port, addr, len) NdisRawReadPortBufferUshort(port, addr, (len));
#define OUT_PORT_STRING_16(port, addr, len) NdisRawWritePortBufferUshort(port, addr, (len));
#endif // _APIDLL / _WIN32_WCE
#if defined _WIN32_WCE
#define HCF_ALIGN 2
#define HCF_MEM_IO 1 // overrule standard Port I/O with Memory mapped I/O
#define HCF_PROT_TIME 49
#define IN_PORT_BYTE CE_IN_PORT_BYTE
#define OUT_PORT_BYTE CE_OUT_PORT_BYTE
#define IN_PORT_WORD CE_IN_PORT_WORD
#define OUT_PORT_WORD CE_OUT_PORT_WORD
#define IN_PORT_STRING_16 CE_IN_PORT_STRING
#define OUT_PORT_STRING_16 CE_OUT_PORT_STRING
extern hcf_8 CE_IN_PORT_BYTE(hcf_32 port);
extern void CE_OUT_PORT_BYTE(hcf_32 port, hcf_8 value);
extern hcf_16 CE_IN_PORT_WORD(hcf_32 port);
extern void CE_OUT_PORT_WORD(hcf_32 port, hcf_16 value);
extern void CE_IN_PORT_STRING(hcf_32 port, void *addr, hcf_16 len);
extern void CE_OUT_PORT_STRING(hcf_32 port, void *addr, hcf_16 len);
#endif
#if defined _DEBUG || (defined DBG && DBG != 0)
#define HCF_ASSERT ( HCF_ASSERT_LNK_MSF_RTN | HCF_ASSERT_RT_MSF_RTN | HCF_ASSERT_PRINTF ) //0xC001
//#define HCF_ASSERT ( HCF_ASSERT_LNK_MSF_RTN | HCF_ASSERT_RT_MSF_RTN | HCF_ASSERT_PRINTF | HCF_ASSERT_MB ) //just to test
#endif // _DEBUG || DBG
#if defined DEBUG || defined _DEBUG || (defined DBG && DBG != 0)
#ifdef _WIN32_WCE
#define DBGA2W(DBGSTR) CeConvertAnsiToUnicodeLen((char*)DBGSTR)
#define OUTPUTDEBUGMSG(dprintf_exp) ((void)((! ZONE_DEBUG) ? 0:ce_debug_out dprintf_exp))
#define ASSERTDEBUGMSG(cond, dprintf_exp) ((void)((cond) ? 0:ce_debug_out dprintf_exp))
#define ZONE_ERROR DEBUGZONE(0)
#define ZONE_WARN DEBUGZONE(1)
#define ZONE_FUNCTION DEBUGZONE(2)
#define ZONE_INIT DEBUGZONE(3)
#define ZONE_INTR DEBUGZONE(4)
#define ZONE_RCV DEBUGZONE(5)
#define ZONE_XMIT DEBUGZONE(6)
#define ZONE_ASSERT DEBUGZONE(7)
#define ZONE_DEBUG DEBUGZONE(8)
#define ZONE_OEM DEBUGZONE(9)
#define ZONE_HCF DEBUGZONE(10)
#define ZONE_PORTIO DEBUGZONE(11)
#define ZONE_LOGTOFILE DEBUGZONE(15)
#else // !(_WIN32_WCE)
#define OUTPUTDEBUGMSG(dprintf_exp) ((void) (DbgPrint dprintf_exp))
// the assertdebugmsg macro will print filename, line followed by a caller-defined text, when cond == 0
#define ASSERTDEBUGMSG(cond, print) ((void)((cond) ? 0: (DbgPrint("%s %s:%d - ", print, __FILE__, __LINE__))))
#define ZONE_ERROR 1
#define ZONE_WARN 1
#define ZONE_FUNCTION 1
#define ZONE_INIT 1
#define ZONE_INTR 1
#define ZONE_RCV 1
#define ZONE_XMIT 1
#define ZONE_ASSERT 1
#define ZONE_DEBUG 1
#define ZONE_OEM 1
#define ZONE_HCF 1
#define ZONE_PORTIO 1
#define ZONE_LOGTOFILE 1
#endif // _WIN32_WCE
#ifndef DBGA2W
#define DBGA2W
#endif // DBGA2W
#else // !(defined DEBUG || defined _DEBUG || (defined DBG && DBG != 0) )
#define OUTPUTDEBUGMSG(dprintf_exp)
#define ASSERTDEBUGMSG(cond, dprintf_exp)
#endif // DEBUG / DBG
#if !defined HCF_MAX_MSG_CKIP_PADDING
#define HCF_MAX_MSG_CKIP_PADDING 0
#endif // HCF_MAX_MSG_CKIP_PADDING
#if !defined HCF_MAX_MSG
#define HCF_MAX_MSG 1514
#endif // HCF_MAX_MSG
#define HCF_LEGACY 1 //;?nv je moet wat
#endif //WVLAN_41 / WVLAN_48 / WVLAN_52 / _WIN32_WCE
/************************************************************************************************/
/**************************** P A C K E T D R I V E R ***************************************/
/********************************** D O S O D I *********************************************/
/************************************************************************************************/
#if defined WVLAN_42 || defined WVLAN_43
#pragma warning ( disable: 4001 )
#define FAR __far //segmented 16 bits mode
#define BASED __based(__segname("_CODE")) //force all the "const" structures in the CODE segment
//#define HCF_IO 0 //no DMA, no 32 bits
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ To ease testing the different options ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#define HCF_EXT HCF_EXT_MB
#define HCF_PROT_TIME 49 //49*10240 microseconds H/W failure protection timer
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ To ease testing the different options ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/******************************** CONFIGURATION MANAGEMENT *****************************************/
#ifdef WVLAN_42
#define MSF_COMPONENT_ID COMP_ID_PACKET
#define MSF_COMPONENT_VAR 1
#define MSF_COMPONENT_MAJOR_VER 6
#define MSF_COMPONENT_MINOR_VER 12
#endif // WVLAN_42
#ifdef WVLAN_43
#define MSF_COMPONENT_ID COMP_ID_ODI_16
#define MSF_COMPONENT_VAR 1
#define MSF_COMPONENT_MAJOR_VER 6
#define MSF_COMPONENT_MINOR_VER 10
#endif // WVLAN_43
/************************************** INPUT / OUTPUT **********************************************/
#ifndef H_2_INC
#include <stdio.h>
#include <conio.h>
#if 1 //temorary use functions defined in hcf.c
#ifndef _DEBUG
#pragma intrinsic( _inp, _inpw, _outp, _outpw )
#endif // _DEBUG
#define IN_PORT_WORD(port) ((hcf_16)_inpw( (hcf_io)(port) ))
#define OUT_PORT_WORD(port, value) ((void)_outpw( (hcf_io)(port), value ))
#if 1 // C implementation which let the processor handle the word-at-byte-boundary problem
#define IN_PORT_STRING_8_16( port, addr, n) while (n--) \
{ *(hcf_16 FAR*)addr = IN_PORT_WORD( port ); ((hcf_8 FAR*)addr)+=2; }
#define OUT_PORT_STRING_8_16( port, addr, n) while (n--) \
{ OUT_PORT_WORD( port, *(hcf_16 FAR*)addr ) ; ((hcf_8 FAR*)addr)+=2; }
#elif 0 // C implementation which handles the word-at-byte-boundary problem
#define IN_PORT_STRING_8_16( port, addr, n) while ( n-- ) \
{ hcf_16 i = IN_PORT_WORD(port); *((hcf_8 FAR*)addr)++ = (hcf_8)i; *((hcf_8 FAR*)addr)++ = (hcf_8)(i>>8);}
#define OUT_PORT_STRING_8_16( port, addr, n) while ( n-- ) \
{ OUT_PORT_WORD( port, *((hcf_8 FAR*)addr) | *(((hcf_8 FAR*)addr)+1)<<8 ); (hcf_8 FAR*)addr+=2; }
#else // Assembler implementation
#define IN_PORT_STRING_8_16( port, addr, n) __asm \
{ \
__asm push di \
__asm push es \
__asm mov cx,n \
__asm les di,addr \
__asm mov dx,port \
__asm rep insw \
__asm pop es \
__asm pop di \
}
#define OUT_PORT_STRING_8_16( port, addr, n) __asm \
{ \
__asm push si \
__asm push ds \
__asm mov cx,n \
__asm lds si,addr \
__asm mov dx,port \
__asm rep outsw \
__asm pop ds \
__asm pop si \
}
#endif // Asm or C implementation
#define IN_PORT_STRING_32( port, addr, n) { int n2 = 2*n; IN_PORT_STRING_8_16(port, addr, n2) }
#define OUT_PORT_STRING_32( port, addr, n) { int n2 = 2*n; OUT_PORT_STRING_8_16(port, addr, n2) }
#endif // 0 //temorary use functions defined in hcf.c
#endif // H_2_INC
#endif // WVLAN_42 / WVLAN_43
/************************************************************************************************/
/**************************** D O S H - I / II L O A D E R **********************************/
/************************************************************************************************/
#if defined H0_LDR || defined H1_LDR || defined H2_LDR || defined H5_LDR
#if defined H0_LDR //implies H-I
#define HCF_DLV 0 //H-I legacy, meaningless under H-II
#define HCF_DLNV 1 //H-I legacy, meaningless under H-II
#endif // H0_LDR
#if defined H1_LDR //implies H-I
#define HCF_DLV 1 //H-I legacy, meaningless under H-II
#define HCF_DLNV 0 //H-I legacy, meaningless under H-II
#endif // H1_LDR / H2_LDR
//#if defined H2_LDR : not needed, H-II defaults are O.K for H2_LDR
#ifdef H5_LDR
#define HCF_TYPE (HCF_TYPE_HII5 | HCF_TYPE_WARP )
//;? why does only this subset of the H_LDRs need HCF_TYPE to be defined here
#endif
#define HCF_ASSERT HCF_ASSERT_LNK_MSF_RTN //support dynamic linking of msf_assert routine
#define HCF_ENCAP 0
#define HCF_INT_ON 0
#define HCF_TALLIES 0
#define MSF_COMPONENT_ID COMP_ID_ODI_16 //;?By lack of any better
#define MSF_COMPONENT_VAR 1
#define MSF_COMPONENT_MAJOR_VER 0
#define MSF_COMPONENT_MINOR_VER 0
#include <stdio.h>
#include <conio.h>
#if defined NDEBUG
#pragma intrinsic( _inp, _inpw, _outp, _outpw )
#endif // NDEBUG
#if 0 //use 0 to replace I/O Macros with logging facility
#define IN_PORT_WORD(port) ((hcf_16)_inpw( (hcf_io)(port) ))
#define OUT_PORT_WORD(port, value) ((void)_outpw( (hcf_io)(port), value ))
#define IN_PORT_STRING_16( port, addr, n) \
while ( n-- ) { *(hcf_16 FAR*)addr = IN_PORT_WORD( port ); (cast)addr += 2; }
#define OUT_PORT_STRING_16( port, addr, n) \
while ( n-- ) { OUT_PORT_WORD( port, *(hcf_16 FAR*)addr ) ; (cast)addr += 2; }
#endif //use 0 to replace I/O Macros with logging facility
#endif // H0_LDR / H1_LDR / H2_LDR
/************************************************************************************************/
/**************************** H C F D E M O P R O G R A M ***********************************/
/************************************************************************************************/
#if defined HCF_DEMO
#define HCF_DLV 1 //;?should become the default !defaults to 1 anyway for H-II
//#define HCF_DLNV 0 //defaults to 0 anyway for H-II
#define HCF_ASSERT HCF_ASSERT_LNK_MSF_RTN //support dynamic linking of msf_assert routine
#define HCF_ENCAP 0
#define HCF_INT_ON 0
#define HCF_TALLIES ( HCF_TALLIES_NIC | HCF_TALLIES_HCF )
//#define MSF_COMPONENT_ID NO configuration management
#include <stdio.h>
#include <conio.h>
#if defined NDEBUG
#pragma intrinsic( _inp, _inpw, _outp, _outpw )
#endif // NDEBUG
#if 0 //use 0 to replace I/O Macros with logging facility
#define IN_PORT_WORD(port) ((hcf_16)_inpw( (hcf_io)(port) ))
#define OUT_PORT_WORD(port, value) ((void)_outpw( (hcf_io)(port), value ))
#define IN_PORT_STRING_16( port, addr, n) \
while ( n-- ) { *(hcf_16 FAR*)addr = IN_PORT_WORD( port ); (cast)addr += 2; }
#define OUT_PORT_STRING_16( port, addr, n) \
while ( n-- ) { OUT_PORT_WORD( port, *(hcf_16 FAR*)addr ) ; (cast)addr += 2; }
#endif //use 0 to replace I/O Macros with logging facility
#endif // HCF_DEMO
/************************************************************************************************/
/*********************************** M A C O S **********************************************/
/************************************************************************************************/
#if defined WVLAN_45
#include "Version.h"
#define MSF_COMPONENT_ID COMP_ID_MAC_OS
#define MSF_COMPONENT_VAR VARIANT
#define MSF_COMPONENT_MAJOR_VER VERSION_MAJOR
#define MSF_COMPONENT_MINOR_VER VERSION_MINOR
#define MAC_OS 1
#define HCF_BIG_ENDIAN 1 // selects Big Endian (a.k.a. Motorola), most significant byte first
#if defined DEBUG
#define HCF_ASSERT HCF_ASSERT_MB // logging via Mailbox
#endif // DEBUG
#ifdef __cplusplus
extern "C" {
#endif // __cplusplus
extern volatile unsigned char *MacIOaddr;
extern hcf_16 IN_PORT_WORD(hcf_16 port);
extern void OUT_PORT_WORD(hcf_16 port, hcf_16 value);
extern void IN_PORT_STRING_16(hcf_16 port, void *addr, hcf_16 len);
extern void OUT_PORT_STRING_16(hcf_16 port, void *addr, hcf_16 len);
#define SwapBytes(t) (((t) >> 8) + (((t) & 0xff) << 8))
#ifdef __cplusplus
}
#endif // __cplusplus
#endif // WVLAN_45
/************************************************************************************************/
/****************************************** L I N U X *****************************************/
/************************************************************************************************/
#ifdef WVLAN_49
#include <asm/io.h>
//#include <linux/module.h>
#include <wl_version.h>
/* The following macro ensures that no symbols are exported, minimizing the chance of a symbol
collision in the kernel */
//EXPORT_NO_SYMBOLS; //;?this place seems not appropriately to me
//#define HCF_SLEEP (HCF_CDS | HCF_DDS )
#define HCF_SLEEP (HCF_CDS)
//#define HCF_TYPE (HCF_TYPE_HII5|HCF_TYPE_STA|HCF_TYPE_AP)
#ifdef HERMES25
#ifdef WARP
#define HCF_TYPE ( HCF_TYPE_WARP | HCF_TYPE_HII5 )
#else
#define HCF_TYPE HCF_TYPE_HII5
#endif // WARP
#else
#define HCF_TYPE HCF_TYPE_NONE
#endif // HERMES25
#ifdef ENABLE_DMA
#define HCF_DMA 1
#endif // ENABLE_DMA
/* We now need a switch to include support for the Mailbox and other necessary extensions */
#define HCF_EXT ( HCF_EXT_MB | HCF_EXT_INFO_LOG | HCF_EXT_INT_TICK )//get deepsleep exercise going
/* ;? The Linux MSF still uses these definitions; define it here until it's removed */
#ifndef HCF_TYPE_HII
#define HCF_TYPE_HII 0x0004
#endif
#ifndef HCF_TYPE_AP
#define HCF_TYPE_AP 0x0010
#endif
#ifndef HCF_TYPE_STA
#define HCF_TYPE_STA 0x0020
#endif // HCF_TYPE_STA
/* Guarantees word alignment */
#define HCF_ALIGN 2
/* Endian macros CNV_INT_TO_LITTLE() and CNV_LITTLE_TO_INT() were renamed to
CNV_SHORT_TO_LITTLE() and CNV_LITTLE_TO_SHORT() */
#ifndef CNV_INT_TO_LITTLE
#define CNV_INT_TO_LITTLE CNV_SHORT_TO_LITTLE
#endif
#ifndef CNV_LITTLE_TO_INT
#define CNV_LITTLE_TO_INT CNV_LITTLE_TO_SHORT
#endif
#define HCF_ERR_BUSY 0x06
/* UIL defines were removed from the HCF */
#define UIL_SUCCESS HCF_SUCCESS
#define UIL_ERR_TIME_OUT HCF_ERR_TIME_OUT
#define UIL_ERR_NO_NIC HCF_ERR_NO_NIC
#define UIL_ERR_LEN HCF_ERR_LEN
#define UIL_ERR_MIN HCF_ERR_MAX /*end of HCF errors which are passed through to UIL
*** ** *** ****** ***** *** ****** ******* ** *** */
#define UIL_ERR_IN_USE 0x44
#define UIL_ERR_WRONG_IFB 0x46
#define UIL_ERR_MAX 0x7F /*upper boundary of UIL errors without HCF-pendant
***** ******** ** *** ****** ******* *** ******* */
#define UIL_ERR_BUSY HCF_ERR_BUSY
#define UIL_ERR_DIAG_1 HCF_ERR_DIAG_1
#define UIL_FAILURE 0xFF /* 20010705 nv this relick should be eridicated */
#define UIL_ERR_PIF_CONFLICT 0x40 //obsolete
#define UIL_ERR_INCOMP_DRV 0x41 //obsolete
#define UIL_ERR_DOS_CALL 0x43 //obsolete
#define UIL_ERR_NO_DRV 0x42 //obsolete
#define UIL_ERR_NSTL 0x45 //obsolete
#if 0 //;? #ifdef get this going LATER HERMES25
#define HCF_IO HCF_IO_32BITS
#define HCF_DMA 1
#define HCF_DESC_STRCT_EXT 4
/* Switch for BusMaster DMA support. Note that the above define includes the DMA-specific HCF
code in the build. This define sets the MSF to use DMA; if ENABLE_DMA is not defined, then
port I/O will be used in the build */
#ifndef BUS_PCMCIA
#define ENABLE_DMA
#endif // USE_PCMCIA
#endif // HERMES25
/* Overrule standard WaveLAN Packet Size when in DMA mode */
#ifdef ENABLE_DMA
#define HCF_MAX_PACKET_SIZE 2304
#else
#define HCF_MAX_PACKET_SIZE 1514
#endif // ENABLE_DMA
/* The following sets the component ID, as well as the versioning. See also wl_version.h */
#define MSF_COMPONENT_ID COMP_ID_LINUX
#define MSF_COMPONENT_VAR DRV_VARIANT
#define MSF_COMPONENT_MAJOR_VER DRV_MAJOR_VERSION
#define MSF_COMPONENT_MINOR_VER DRV_MINOR_VERSION
/* Define the following to turn on assertions in the HCF */
//#define HCF_ASSERT 0x8000
#define HCF_ASSERT HCF_ASSERT_LNK_MSF_RTN // statically binding of msf_assert routine
#ifdef USE_BIG_ENDIAN
#define HCF_BIG_ENDIAN 1
#else
#define HCF_BIG_ENDIAN 0
#endif /* USE_BIG_ENDIAN */
/* Define the following if your system uses memory-mapped IO */
//#define HCF_MEM_IO
/* The following defines the standard macros required by the HCF to move data to/from the card */
#define IN_PORT_BYTE(port) ((hcf_8)inb( (hcf_io)(port) ))
#define IN_PORT_WORD(port) ((hcf_16)inw( (hcf_io)(port) ))
#define OUT_PORT_BYTE(port, value) (outb( (hcf_8) (value), (hcf_io)(port) ))
#define OUT_PORT_WORD(port, value) (outw((hcf_16) (value), (hcf_io)(port) ))
#define IN_PORT_STRING_16(port, dst, n) insw((hcf_io)(port), dst, n)
#define OUT_PORT_STRING_16(port, src, n) outsw((hcf_io)(port), src, n)
//#define IN_PORT_STRINGL(port, dst, n) insl((port), (dst), (n))
//#define OUT_PORT_STRINGL(port, src, n) outsl((port), (src), (n))
#define IN_PORT_STRING_32(port, dst, n) insl((port), (dst), (n))
#define OUT_PORT_STRING_32(port, src, n) outsl((port), (src), (n))
#define IN_PORT_HCF32(port) inl( (hcf_io)(port) )
#define OUT_PORT_HCF32(port, value) outl((hcf_32)(value), (hcf_io)(port) )
#define IN_PORT_DWORD(port) IN_PORT_HCF32(port)
#define OUT_PORT_DWORD(port, value) OUT_PORT_HCF32(port, value)
#define IN_PORT_STRING_8_16(port, addr, len) IN_PORT_STRING_16(port, addr, len)
#define OUT_PORT_STRING_8_16(port, addr, len) OUT_PORT_STRING_16(port, addr, len)
#ifndef OUTPUTDEBUGMSG
#define OUTPUTDEBUGMSG(dprintf_exp)
#endif
#ifndef ASSERTDEBUGMSG
#define ASSERTDEBUGMSG(cond, dprintf_exp)
#endif
#ifndef CFG_SCAN_CHANNELS_2GHZ
#define CFG_SCAN_CHANNELS_2GHZ 0xFCC2
#endif /* CFG_SCAN_CHANNELS_2GHZ */
#define HCF_MAX_MSG 1600 //get going ;?
#endif // WVLAN_49
/************************************************************************************************/
/********************************************* Q N X ******************************************/
/************************************************************************************************/
#if defined __QNX__ || defined WVLAN_50
#define MSF_COMPONENT_ID 0 //Although there is no DUI support, we need this to get ...
#define MSF_COMPONENT_VAR 0 //...compatibilty check to function
#define MSF_COMPONENT_MAJOR_VER 0 //...;?this is worth looking into to make this a more
#define MSF_COMPONENT_MINOR_VER 0 //..."defined" I/F so OEMers can figure out what to do
#include <conio.h>
#define IN_PORT_WORD(port) ((hcf_16)inpw( (hcf_io)(port) ))
#define OUT_PORT_WORD(port, value) (outpw( (hcf_io)(port), (hcf_16) (value) ))
/*
#define IN_PORT_STRING_16( port, addr, n) \
while ( n-- ) { *(hcf_16*)addr = IN_PORT_WORD( port ); (cast)addr += 2; }
#define OUT_PORT_STRING_16( port, addr, n) \
while ( n-- ) { OUT_PORT_WORD( port, *(hcf_16*)addr ) ; (cast)addr += 2; }
*/
#endif // QNX / WVLAN_50
/************************************************************************************************/
/********************************************* B E O S ****************************************/
/************************************************************************************************/
#if defined __BEOS__
#define MSF_COMPONENT_ID 0 //Although there is no DUI support, we need this to get ...
#define MSF_COMPONENT_VAR 0 //...compatibilty check to function
#define MSF_COMPONENT_MAJOR_VER 0 //...;?this is worth looking into to make this a more
#define MSF_COMPONENT_MINOR_VER 0 //..."defined" I/F so OEMers can figure out what to do
#include <drivers/Drivers.h>
#include <drivers/KernelExport.h>
uint8 read_io_8 (int);
void write_io_8 (int, uint8);
uint16 read_io_16 (int);
void write_io_16 (int, uint16);
#define IN_PORT_WORD(port) ((hcf_16)read_io_16( (hcf_io)(port) ))
#define OUT_PORT_WORD(port, value) (write_io_16( (hcf_io)(port), (hcf_16) (value) ))
/*
#define IN_PORT_STRING_16( port, addr, n) \
while ( n-- ) { *(hcf_16*)addr = IN_PORT_WORD( port ); (cast)addr += 2; }
#define OUT_PORT_STRING_16( port, addr, n) \
while ( n-- ) { OUT_PORT_WORD( port, *(hcf_16*)addr ) ; (cast)addr += 2; }
*/
#endif // __BEOS__
/************************************************************************************************/
/******************************** U S B D O N G L E *****************************************/
/************************************************************************************************/
#if defined USB
#include "gpif.h"
#define MSF_COMPONENT_MAJOR_VER 0
#define MSF_COMPONENT_MINOR_VER 1
#define IN_PORT_WORD(port) (Hermes_IO_Read( (hcf_8)(port)))
#define OUT_PORT_WORD(port, value) (Hermes_IO_Write( (hcf_8)port, /*(hcf_16)*/(value) ) )
/* !!!! NOTE USB supports only 16-bits I/O and no 8-bits I/O
* as a consequence the IN_/OUT_PORT_STRING_16 macros use hcf_16* rather than hcf_8 pointers
* to get more optimal code
* therefore the pointers are incremented by 1 (which means two "bytes") rather than by 2
*/
//#define IN_PORT_STRING_16( port, addr, n) while ( n-- ) { *((hcf_16*)addr)++ = IN_PORT_WORD( port ); }
//#define OUT_PORT_STRING_16( port, addr, n) while ( n-- ) { OUT_PORT_WORD( port, *((hcf_16*)addr)++ ); }
#define IN_PORT_STRING_16( port, dst, n) while ( n-- ) { *dst++ = IN_PORT_WORD( port ); }
#define OUT_PORT_STRING_16( port, src, n) while ( n-- ) { OUT_PORT_WORD( port, *src++ ); }
//#define HCF_TYPE ( HCF_TYPE_AP | HCF_TYPE_WPA )
#define HCF_TYPE HCF_TYPE_WPA
#endif // USB
/************************************************************************************************/
/****************************************** FreeBSD *******************************************/
/************************************************************************************************/
#if defined __FREE_BSD__
#define MSF_COMPONENT_ID COMP_ID_FreeBSD
#define MSF_COMPONENT_VAR 1
#define MSF_COMPONENT_MAJOR_VER 1
#define MSF_COMPONENT_MINOR_VER 0
#define HCF_IO HCF_IO_MEM // overrule standard Port I/O with Memory mapped I/O
#include <machine/cpufunc.h>
#define IN_PORT_WORD(port) ((hcf_16)inw( (hcf_io)(port) ))
#define OUT_PORT_WORD(port, value) (outw((hcf_io)(port), (hcf_16)(value)))
/*
#define IN_PORT_STRING_16( port, addr, n) \
while ( n-- ) { *(hcf_16*)addr = IN_PORT_WORD( port ); (cast)addr += 2; }
#define OUT_PORT_STRING_16( port, addr, n) \
while ( n-- ) { OUT_PORT_WORD( port, *(hcf_16*)addr ) ; (cast)addr += 2; }
*/
#endif // __FREE_BSD__
/************************************************************************************************/
/********************************* W A V E P O I N T ******************************************/
/************************************************************************************************/
#if defined WVLAN_81 /* BORLANDC */
#define EXTERN_C extern // needed because DHF uses this instead of 'extern'
#define MSF_COMPONENT_ID COMP_ID_AP1
#define MSF_COMPONENT_VAR 1
#define MSF_COMPONENT_MAJOR_VER 4
#define MSF_COMPONENT_MINOR_VER 0
#define HCF_PROT_TIME 49 //49*10240 microseconds H/W failure protection timer
//#define HCF_ASSERT HCF_ASSERT_MB // logging via Mailbox /* debug build only */
#if !defined FAR
#define FAR far // segmented 16 bits mode
#endif // FAR
#define IN_PORT_WORD(port) (inport( (hcf_io)(port) ))
#define OUT_PORT_WORD(port, value) (outport( (hcf_io)(port), value ))
#define IN_PORT_STRING_16(port, addr, len) \
asm { push di; push es; mov cx,len; les di,addr; mov dx,port; rep insw; pop es; pop di }
#define OUT_PORT_STRING_16(port, addr, len) \
asm { push si; push ds; mov cx,len; lds si,addr; mov dx,port; rep outsw; pop ds; pop si }
#endif // WVLAN_81
/************************************************************************************************/
/******************************** W A V E L A U N C H *****************************************/
/************************************************************************************************/
#if defined WVLAUNCH
#include "DriverX.h"
extern HWDEVICE* g_pDevice;
//#define MSF_COMPONENT_ID 0 //;? to get around browser problem
#define IN_PORT_WORD(port) HwInpw( g_pDevice, port )
#define OUT_PORT_WORD(port, value) HwOutpw( g_pDevice, port, value )
// C implementation which let the processor handle the word-at-byte-boundary problem
/*
#define IN_PORT_STRING_16( port, addr, n) \
while ( n-- ) { *(hcf_16 FAR*)addr = IN_PORT_WORD( port ); (cast)addr += 2; }
#define OUT_PORT_STRING_16( port, addr, n) \
while ( n-- ) { OUT_PORT_WORD( port, *(hcf_16 FAR*)addr ) ; (cast)addr += 2; }
*/
#endif // WVLAUNCH
/************************************************************************************************/
/************************************* W C I T S T *********************************************/
/************************************************************************************************/
#if defined WCITST
#define MSF_COMPONENT_ID 0 //Although there is no DUI support, we need this to get ...
#define MSF_COMPONENT_VAR 0 //...compatibilty check to function
#define MSF_COMPONENT_MAJOR_VER 0 //...;?this is worth looking into to make this a more
#define MSF_COMPONENT_MINOR_VER 0 //..."defined" I/F so OEMers can figure out what to do
//#define HCF_ENCAP HCF_ENC_NONE //to get going
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ To ease testing the different options ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#define HCF_TYPE (HCF_TYPE_WPA | HCF_TYPE_PRELOADED) // Hermes-I for HCF6, II for HCF7
#define HCF_DMA 1
//#define LLB //!!!!MIC Debug Only
#if defined LLB && !((HCF_TYPE) & HCF_TYPE_WPA)
err: no LLB unless SSN;
#endif // LLB / HCF_TYPE_WPA
//#define HCF_ALIGN 2
#define HCF_DLV 1 //just to change memory layout ????;?
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ To ease testing the different options ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#define HCF_ASSERT HCF_ASSERT_SW_SUP // logging via Hermes support registerr
//#define HCF_ASSERT HCF_ASSERT_MB // logging via Mailbox
#if defined __GNUC__
#include "stdio.h"
//#include "unistd.h" //ioperm libc5
#include "sys/io.h" //ioperm glibc
#define extern //see IO Port Programming mini-HOWTO
//#include "asm/io.h" //
#define IN_PORT_WORD(port) inw( (hcf_io)(port) )
#define IN_PORT_DWORD(port) inl( (hcf_io)(port) )
#define OUT_PORT_WORD(port, value) outw( (hcf_io)(port), (hcf_16)(value) )
#define OUT_PORT_DWORD(port, value) outl( (hcf_io)(port), (hcf_16)(value) )
#else
#pragma warning ( disable: 4001 )
#define FAR __far // segmented 16 bits mode
#include <stdio.h>
#include <conio.h>
#ifndef _DEBUG
#pragma intrinsic( _inp, _inpw, _outp, _outpw )
#endif // _DEBUG
#ifdef LOG
extern FILE* utm_logfile;
hcf_16 ipw( hcf_16 port );
hcf_8 ipb( hcf_16 port );
void opw( hcf_16 port, hcf_16 value );
void opb( hcf_16 port, hcf_8 value );
#define IN_PORT_WORD(port) ipw( (hcf_io)(port) )
#define OUT_PORT_WORD(port, value) opw( (hcf_io)(port), (hcf_16)(value) )
#else // LOG
#define IN_PORT_WORD(port) ((hcf_16)_inpw( (hcf_io)(port) ))
#define OUT_PORT_WORD(port, value) ((void)_outpw( (hcf_io)(port), value ))
#endif // LOG
#if 1 //ASM example
#define IN_PORT_STRING_16( port, addr, len) __asm \
{ \
__asm push di \
__asm push es \
__asm mov cx,len \
__asm les di,addr \
__asm mov dx,port \
__asm rep insw \
__asm pop es \
__asm pop di \
}
#define OUT_PORT_STRING_16( port, addr, len) __asm \
{ \
__asm push si \
__asm push ds \
__asm mov cx,len \
__asm lds si,addr \
__asm mov dx,port \
__asm rep outsw \
__asm pop ds \
__asm pop si \
}
#endif // asm example
#endif // __GCC__
#if ! defined IN_PORT_STRING_16
#define IN_PORT_STRING_16( port, addr, n) while (n--) \
{ *(hcf_16 FAR*)addr = IN_PORT_WORD( port ); ((hcf_16 FAR*)addr)++; }
#define OUT_PORT_STRING_16( port, addr, n) while (n--) \
{ OUT_PORT_WORD( port, *(hcf_16 FAR*)addr ); ((hcf_16 FAR*)addr)++; }
#endif // IN_PORT_STRING_16
#endif // WCITST
/************************************************************************************************/
/******************************* Motorola Power PC 800 family *********************************/
/************************************************************************************************/
/* known users: LH@I
*/
#if defined I_MPC8XX
#define MSF_COMPONENT_VAR 0
#define MSF_COMPONENT_ID 0
#define MSF_COMPONENT_MAJOR_VER 1
#define MSF_COMPONENT_MINOR_VER 0
#define HCF_HSI_VAR 1
#define HCF_BIG_ENDIAN 1
#define HCF_IO HCF_IO_MEM // overrule standard Port I/O with Memory mapped I/O
#include "o_portbl.h"
#include "ipcmcia.h"
typedef o_uint8_t hcf_8;
typedef o_uint16_t hcf_16;
typedef o_uint32_t hcf_32;
/***************************************************************************/
#ifdef _lint
#else
asm hcf_16 IN_PORT_WORD(int port)
{
% reg port
lhbrx r3,r0,port
eieio
}
#endif // _lint
#ifdef _lint
#else
asm void OUT_PORT_WORD(int port, hcf_16 value)
{
% reg port, value
sthbrx value,r0,port
eieio
}
#endif // _lint
/***************************************************************************/
#define IN_PORT_STRING_16(port, addr, len) \
{ \
unsigned l = (len); \
hcf_16 *d = (volatile hcf_16 *)(addr); \
while (l--) \
{ \
*d++ = *(volatile hcf_16 *)(port); \
EIEIO(); \
} \
}
#define OUT_PORT_STRING_16(port, addr, len) \
{ \
unsigned l = (len); \
hcf_16 *s = (volatile hcf_16 *)(addr); \
while (l--) \
{ \
*(volatile hcf_16 *)(port) = *s++; \
EIEIO(); \
} \
}
#endif // I_MPC8XX
/************************************************************************************************/
/********************************** Diab or High C 29K **************************************/
/************************************************************************************************/
/* known users: GK@C
*/
#if defined _AM29K
#define MSF_COMPONENT_VAR 0
#define MSF_COMPONENT_ID COMP_ID_AP1
#define MSF_COMPONENT_MAJOR_VER 1
#define MSF_COMPONENT_MINOR_VER 0
#define HCF_BIG_ENDIAN 1
#define HCF_IO HCF_IO_MEM // overrule standard Port I/O with Memory mapped I/O
#define SwapBytes(t) /*lint -e572*/(((t) >> 8) + (((t) & 0xff) << 8))/*lint +e572*/
#if defined __ppc
#ifndef __GNUC__
#define __asm__ asm
#endif
#if ! defined _lint
#define EIEIO() __asm__(" eieio")
#else
#define EIEIO()
#endif
static hcf_16 IN_PORT_WORD(int port) {
hcf_16 value = *(volatile hcf_16 *)(port); EIEIO();
value = SwapBytes(value);
return value;
}
#define OUT_PORT_WORD(port, value) \
{ *(volatile hcf_16 *)(port) = SwapBytes(value); EIEIO(); }
#else
#define IN_PORT_WORD(port) (*(volatile hcf_16 *)(port))
#define OUT_PORT_WORD(port, value) (*(volatile hcf_16 *)(port) = (value))
#endif // __ppc
/***************************************************************************/
#define IN_PORT_STRING_16( port, addr, len) { \
unsigned l = (len); \
hcf_16 t, *d = (volatile hcf_16 *)(addr); \
while (l--) { \
t = IN_PORT_WORD(port); \
*d++ = SwapBytes(t); \
} \
}
#define OUT_PORT_STRING_16( port, addr, len) { \
unsigned l = (len); \
hcf_16 t, *s = (volatile hcf_16 *)(addr); \
while (l--) { \
t = *s++; \
OUT_PORT_WORD(port, SwapBytes(t)); \
} \
}
#if PRODUCT == 9150
#define HCF_ASSERT HCF_ASSERT_MB // logging via Mailbox
#undef MSF_COMPONENT_ID
#endif // 9150
#endif // _AM29K
/************************************************************************************************/
/***************************************** MPC860 **********************************************/
/************************************************************************************************/
/* known users: RR
*/
#if defined CPU
#if CPU == PPC860
#define MSF_COMPONENT_VAR 0
#define MSF_COMPONENT_ID 0
#define MSF_COMPONENT_MAJOR_VER 1
#define MSF_COMPONENT_MINOR_VER 0
#define HCF_BIG_ENDIAN 1
#define HCF_IO HCF_IO_MEM // overrule standard Port I/O with Memory mapped I/O
#define SwapBytes(t) /*lint -e572*/(((t) >> 8) + (((t) & 0xff) << 8))/*lint +e572*/
#ifndef __GNUC__
#define __asm__ asm
#endif
#if ! defined _lint
#define EIEIO() __asm__(" eieio")
#else
#define EIEIO()
#endif
static hcf_16 IN_PORT_WORD(int port) {
hcf_16 value = *(volatile hcf_16 *)(port); EIEIO();
value = SwapBytes(value);
return value;
#ifdef __GNUC__
/* the following serves to avoid the compiler warnings that
* IN_PORT_WORD() is not used in some files */
(void)IN_PORT_WORD;
#endif
}
#define OUT_PORT_WORD(port, value) \
{ *(volatile hcf_16 *)(port) = SwapBytes(value); EIEIO(); }
/***************************************************************************/
#define IN_PORT_STRING_16( port, addr, len) { \
unsigned l = (len); \
hcf_16 t; \
volatile hcf_16 *d = (volatile hcf_16 *)(addr); \
while (l--) { \
t = IN_PORT_WORD(port); \
*d++ = SwapBytes(t); \
} \
}
#define OUT_PORT_STRING_16( port, addr, len) { \
unsigned l = (len); \
hcf_16 t; \
volatile hcf_16 *s = (volatile hcf_16 *)(addr); \
while (l--) { \
t = *s++; \
OUT_PORT_WORD(port, SwapBytes(t)); \
} \
}
#if PRODUCT == 9150
#define HCF_ASSERT HCF_ASSERT_MB // logging via Mailbox
#undef MSF_COMPONENT_ID
#endif
#endif /* PPC860 */
#endif /* CPU */
/************************************************************************************************/
/**************************** Microtec Research 80X86 Compiler *********************************/
/************************************************************************************************/
#if 0
//#undef HCF_TYPE // Hermes-I Station F/W without SSN support
#define MSF_COMPONENT_VAR 0
#define MSF_COMPONENT_ID 0
#define MSF_COMPONENT_MAJOR_VER 1
#define MSF_COMPONENT_MINOR_VER 0
extern int far inp( int );
extern void far outp( int, int );
extern int far inpw( int );
extern void far outpw( int, int );
#define IN_PORT_WORD(port) ((hcf_16)inpw( (hcf_io)(port) ))
#define OUT_PORT_WORD(port, value) ((void)outpw( (hcf_io)(port), value ))
#define IN_PORT_STRING_16( port, addr, len) { \
unsigned l = (len); \
hcf_16 *d = (hcf_16 *)(addr); \
while (l--) *d++ = IN_PORT_WORD(port); \
}
#define OUT_PORT_STRING_16( port, addr, len) { \
unsigned l = (len); \
hcf_16 *s = (hcf_16 *)(addr); \
while (l--) OUT_PORT_WORD(port, *s++); \
}
#endif /* Microtec 80X86 C Compiler */
/************************************************************************************************/
/****************************** W A V E L A N E C ********************************************/
/************************************************************************************************/
/* known users: KM
*/
#ifdef mc68302
#define MSF_COMPONENT_ID COMP_ID_EC
#include <version.h>
#define MSF_COMPONENT_VAR 1
#define MSF_COMPONENT_MAJOR_VER MAJOR_VERSION
#define MSF_COMPONENT_MINOR_VER MINOR_VERSION
#define HCF_BIG_ENDIAN 1
#define HCF_IO HCF_IO_MEM // overrule standard Port I/O with Memory mapped I/O
#define SwapBytes(t) /*lint -e572*/(((t) >> 8) + (((t) & 0xff) << 8))/*lint +e572*/
#define PCMCIA_ADDRESS 0xc80000UL
#define IN_PORT_2BYTES(port) (*(hcf_16 *)(port))
#if 0
static hcf_16 IN_PORT_WORD(hcf_32 port) // should be hcf_io, not hcf_32
{
hcf_16 word = IN_PORT_2BYTES(port);
return SwapBytes(word);
}
#else
static hcf_16 swap_var;
#define IN_PORT_WORD(port) \
(((swap_var = IN_PORT_2BYTES(port)) >> 8) + (((swap_var) & 0xff) << 8))
#endif
#define OUT_PORT_2BYTES(port, value) (*(hcf_16 *)(port) = (hcf_16)(value))
#define OUT_PORT_WORD(port, value) OUT_PORT_2BYTES(port, SwapBytes(value))
/*
#define IN_PORT_STRING_16(port, addr, len) \
while ((len)--) {*(hcf_16 *)(addr) = IN_PORT_2BYTES(port); ((cast)addr) += 2; }
#define OUT_PORT_STRING_16(port, addr, len) \
while ((len)--) {OUT_PORT_2BYTES((port), *(hcf_16 *)(addr)) ; ((cast)addr) += 2; }
*/
#endif /* mc68302 */
/************************************************************************************************/
/********************************* NGAP ***************************************/
/************************************************************************************************/
#if defined __VX_WORKS__ /* VxWorks */
#if defined WLC_STATION
//#undef HCF_TYPE /* Hermes-I Station F/W without SSN support */
#define MSF_COMPONENT_ID COMP_ID_VX_WORKS_ENDSTA
#else
#define MSF_COMPONENT_ID COMP_ID_VX_WORKS_ENDAP
#endif // WLC_STATION
#define HCF_YIELD (taskDelay(0) == 0)
#define MSF_COMPONENT_VAR 1
#define MSF_COMPONENT_MAJOR_VER 1
#define MSF_COMPONENT_MINOR_VER 0
// #define HCF_ASSERT HCF_ASSERT_MB // logging via Mailbox
#if defined PC486BSP
#define IN_PORT_WORD(port) (sysInWord ((hcf_io)(port)))
#define OUT_PORT_WORD(port, value) (sysOutWord ((hcf_io)(port), (hcf_16) (value)))
#define IN_PORT_STRING_16(port, addr, n) (sysInWordString ((hcf_io)(port), addr, n))
#define OUT_PORT_STRING_16(port, addr, n) (sysOutWordString ((hcf_io)(port), addr, n))
#elif defined AS2000BSP
#define HCF_IO HCF_IO_MEM // overrule standard Port I/O with Memory mapped I/O
/* Define PCI stuff here. */
unsigned short sysRead16( unsigned short *port );
void sysWrite16( unsigned short *port, unsigned short value );
#define PCI_IN_BYTE( port ) \
*(unsigned char *)( port )
#define PCI_IN_WORD( port ) \
sysRead16( (unsigned short *)( port ) )
#define PCI_OUT_BYTE( port, value ) \
*(unsigned char *)( port ) = (unsigned char)( value )
#define PCI_OUT_WORD( port, value ) \
sysWrite16( (unsigned short *)( port ), (unsigned short)( value ) )
#define IN_PORT_WORD( port ) \
PCI_IN_WORD( port )
#define OUT_PORT_WORD( port, value ) \
PCI_OUT_WORD( port, value )
#define IN_PORT_STRING_16( port, buf, len ) \
do { \
hcf_16 *p; \
\
for ( p = (hcf_16 *)(buf); p < &( (hcf_16 *)(buf) )[ (int)len ]; p++ ) { \
*p = PCI_IN_WORD( port ); \
} \
} while ( 0 )
#define OUT_PORT_STRING_16( port, buf, len ) \
do { \
const hcf_16 *p; \
\
for ( p = (const hcf_16 *)( buf ); p < &( (const hcf_16 *)(buf) )[ (int)len ]; p++ ) { \
PCI_OUT_WORD( port, *p ); \
} \
} while ( 0 )
#elif defined FADS860BSP /* elif defined AS2000BSP */
#define HCF_BIG_ENDIAN 1
#define HCF_IO HCF_IO_MEM // overrule standard Port I/O with Memory mapped I/O
#ifndef __GNUC__
#define __asm__ asm
#endif
#if ! defined _lint
#define EIEIO() __asm__(" eieio")
#else
#define EIEIO()
#endif
static hcf_16 IN_PORT_WORD(int port) {
hcf_16 value = *(volatile hcf_16 *)(port); EIEIO();
value = ((value & 0xff00) >> 8) + ((value & 0x00ff) << 8);
/* value = CNV_LITTLE_TO_SHORT(value); */
return value;
#ifdef __GNUC__
/* the following serves to avoid the compiler warnings that
* IN_PORT_WORD() is not used in some files */
(void)IN_PORT_WORD;
#endif
}
#define OUT_PORT_WORD(port, value) \
{ *(volatile hcf_16 *)(port) = CNV_SHORT_TO_LITTLE(value); EIEIO(); }
/***********************************************************************/
#define IN_PORT_STRING_16( port, addr, len) { \
unsigned l = (len); \
volatile hcf_16 *d = (volatile hcf_16 *)(addr); \
while (l--) { \
*d++ = *(volatile hcf_16 *)(port); \
EIEIO(); \
} \
}
#define OUT_PORT_STRING_16( port, addr, len) { \
unsigned l = (len); \
volatile hcf_16 *s = (volatile hcf_16 *)(addr); \
while (l--) { \
*(volatile hcf_16 *)(port) = *s++; \
EIEIO(); \
} \
}
#elif defined DAYTONABSP
#define HCF_BIG_ENDIAN 1
#define HCF_IO HCF_IO_MEM // overrule standard Port I/O with Memory mapped I/O
#ifndef __GNUC__
#define __asm__ asm
#endif
#define IN_PORT_WORD(port) (sysOrinocoInWord((unsigned long)(port)))
#define OUT_PORT_WORD(port,value) (sysOrinocoOutWord((unsigned long)(port), (unsigned short)(value)))
#define IN_PORT_STRING_16(port,addr,len) (sysOrinocoInString((port), (addr), (len)))
#define OUT_PORT_STRING_16(port,addr,len) (sysOrinocoOutString((port), (addr), (len)))
extern unsigned char sysOrinocoInByte (unsigned long port);
extern unsigned short sysOrinocoInWord (unsigned long port);
extern void sysOrinocoInString (unsigned long port, void *addr, unsigned short len);
extern void sysOrinocoOutByte (unsigned long port, unsigned char value);
extern void sysOrinocoOutWord (unsigned long port, unsigned short value);
extern void sysOrinocoOutString (unsigned long port, void *addr, unsigned short len);
#elif defined ALPHA_BSP
#define HCF_BIG_ENDIAN 1
#define HCF_IO HCF_IO_MEM // overrule standard Port I/O with Memory mapped I/O
#ifndef __GNUC__
#define __asm__ asm
#endif
#define IN_PORT_WORD(port) (sysOrinocoInWord((unsigned long)(port)))
#define OUT_PORT_WORD(port,value) (sysOrinocoOutWord((unsigned long)(port), (unsigned short)(value)))
#define IN_PORT_STRING_16(port,addr,len) (sysOrinocoInString((port), (addr), (len)))
#define OUT_PORT_STRING_16(port,addr,len) (sysOrinocoOutString((port), (addr), (len)))
extern unsigned char sysOrinocoInByte (unsigned long port);
extern unsigned short sysOrinocoInWord (unsigned long port);
extern void sysOrinocoInString (unsigned long port, void *addr, unsigned short len);
extern void sysOrinocoOutByte (unsigned long port, unsigned char value);
extern void sysOrinocoOutWord (unsigned long port, unsigned short value);
extern void sysOrinocoOutString (unsigned long port, void *addr, unsigned short len);
#else
err: /* commented here */ /* "BSP is not defined..." */
#endif /* else PC486BSP */
#endif // __VX_WORKS__
/************************************************************************************************/
/****************************** VXWORKS. Motorola Sandpoint PowerPC 824X ***********************/
/************************************************************************************************/
#ifdef __VX_WORKS_SANDPOINT_824X__
#include <vxWorks.h>
#include <sysLib.h>
#include <taskLib.h>
#ifdef WVLAN_53
#define MSF_COMPONENT_ID COMP_ID_VX_WORKS_ENDSTA
#endif /* WVLAN_53 */
#ifdef WVLAN_54
#define MSF_COMPONENT_ID COMP_ID_VX_WORKS_ENDAP
#endif /* WVLAN_54 */
#ifdef WVLAN_56
#define MSF_COMPONENT_ID COMP_ID_VX_WORKS_END
#endif /* WVLAN_56 */
#if !defined MSF_COMPONENT_ID
#error "you must define an MSF component ID: WVLAN_53, WVLAN_54, WVLAN_56"
#endif
#define MSF_COMPONENT_VAR 1
#define HCF_EXT HCF_EXT_INFO_LOG
#define HCF_SLEEP ( HCF_CDS | HCF_DDS )
//#define HCF_SLEEP ( HCF_DDS )
#ifndef HCF_ACT_WAKEUP
#define HCF_ACT_WAKEUP 0x1D
#endif // HCF_ACT_WAKEUP
#if defined FATNIC | defined BEAGLE_H253
#define T1__HCF_TYPE HCF_TYPE_STA
#else
#define T1__HCF_TYPE HCF_TYPE_AP | HCF_TYPE_STA
#endif
#ifdef HERMES_USB
#define T2__HCF_TYPE (T1__HCF_TYPE | HCF_TYPE_USB)
#else // HERMES_USB
#define T2__HCF_TYPE (T1__HCF_TYPE)
#endif // HERMES_USB
#ifdef _WARP
#define T3__HCF_TYPE (T2__HCF_TYPE | HCF_TYPE_HII5)
#else // _WARP
#define T3__HCF_TYPE (T2__HCF_TYPE | HCF_TYPE_WPA | HCF_TYPE_HII)
#endif // WARP
#ifdef _CCX
#define T4__HCF_TYPE (T3__HCF_TYPE | HCF_TYPE_CCX)
#else // _WARP
#define T4__HCF_TYPE (T3__HCF_TYPE)
#endif // _CCX
#define T5__HCF_TYPE (T4__HCF_TYPE)
// Default to TYPE_AP + SSN!
#define HCF_TYPE (T5__HCF_TYPE )
#define MSF_COMPONENT_MAJOR_VER 2
#define MSF_COMPONENT_MINOR_VER 0
#define HCF_IO HCF_IO_MEM
#define HCF_DMA 0
#define HCF_MEM_IO 1
#define HCF_BIG_ENDIAN 1
//#define support_32bits 1
#define IN_PORT_WORD(port) (sysInWord( (hcf_io)(port) ))
#define OUT_PORT_WORD(port, value) (sysOutWord( (hcf_io)(port), (hcf_16)(value) ))
#define IN_PORT_DWORD(port) (sysInLong( (hcf_io)(port) ))
#define OUT_PORT_DWORD(port, value) (sysOutLong( (hcf_io)(port), (hcf_16)(value) ))
#define IN_PORT_STRING_16(port, dst, n) (sysInWordString((hcf_io)(port), (hcf_16 *)dst, n))
#define OUT_PORT_STRING_16(port, src, n) (sysOutWordString((hcf_io)(port), (hcf_16 *)src, n))
#ifdef WVLAN_DEBUG
#define DBG 1
#define _DEBUG 1
#endif
/* we'll need to add these prints someday */
#define OUTPUTDEBUGMSG(dprintf_exp)
#define ASSERTDEBUGMSG(cond, dprintf_exp)
#define HCF_INTERFACE_CONNECT(ifbp)
#define HCF_INTERFACE_DISCONNECT(ifbp)
#define HCF_ENTER_INTERFACE_FUNCT(ibfb)
#define HCF_LEAVE_INTERFACE_FUNCT(ifbp)
#define CNV_END_INT(w) ( ((hcf_16)(w) & 0x00FF) << 8 | ((hcf_16)(w) & 0xFF00) >> 8 )
#define CNV_LITTLE_TO_INT(w) CNV_END_INT(w)
#define CNV_INT_TO_LITTLE(w) CNV_LITTLE_TO_INT(w)
#endif /* __VX_WORKS_SANDPOINT_824X__ */
/************************************************************************************************/
/************************************* VXWORKS. ARM T8300 IPPhone *****************************/
/************************************************************************************************/
#if defined( IPT_T8300 ) || defined( IPT_T8307 )
#include <vxWorks.h>
#include <sysLib.h>
#include <taskLib.h>
#define HCF_ALIGN 4 /* default to 4 byte alignment */
#define BEAGLE_H253 /* Hermes 2.5.3 build, better to be in the project file */
#define OOR_DDS /* Hermes 2.5.3 build, better to be in the project file */
#define FATNIC
#ifdef WVLAN_53
#define MSF_COMPONENT_ID COMP_ID_VX_WORKS_ENDSTA
#endif /* WVLAN_53 */
#ifdef WVLAN_54
#define MSF_COMPONENT_ID COMP_ID_VX_WORKS_ENDAP
#endif /* WVLAN_54 */
#ifdef WVLAN_56
#define MSF_COMPONENT_ID COMP_ID_VX_WORKS_END
#endif /* WVLAN_56 */
#if !defined MSF_COMPONENT_ID
#error "you must define an MSF component ID: WVLAN_53, WVLAN_54, WVLAN_56"
#endif
#define MSF_COMPONENT_VAR 1
#define HCF_EXT HCF_EXT_INFO_LOG
//#define HCF_EXT HCF_EXT_INFO_LOG | HCF_EXT_MB
#define HCF_SLEEP ( HCF_CDS | HCF_DDS )
//#define HCF_SLEEP ( HCF_DDS )
#ifndef HCF_ACT_WAKEUP
#define HCF_ACT_WAKEUP 0x1D
#endif // HCF_ACT_WAKEUP
#if defined FATNIC || defined BEAGLE_H253
#define T1__HCF_TYPE HCF_TYPE_STA
#else
//#define T1__HCF_TYPE HCF_TYPE_AP | HCF_TYPE_STA
#define T1__HCF_TYPE HCF_TYPE_STA /* dz, Station code only */
#endif
#ifdef HERMES_USB
#define T2__HCF_TYPE (T1__HCF_TYPE | HCF_TYPE_USB)
#else // HERMES_USB
#define T2__HCF_TYPE (T1__HCF_TYPE)
#endif // HERMES_USB
#ifdef _WARP
#define T3__HCF_TYPE (T2__HCF_TYPE | HCF_TYPE_HII5)
#else // _WARP
#define T3__HCF_TYPE (T2__HCF_TYPE | HCF_TYPE_WPA | HCF_TYPE_HII)
//#define T3__HCF_TYPE (T2__HCF_TYPE | HCF_TYPE_HII) /* dz. no WPA support at this time, test code */
#endif // WARP
#ifdef _CCX
#define T4__HCF_TYPE (T3__HCF_TYPE | HCF_TYPE_CCX)
#else // _WARP
#define T4__HCF_TYPE (T3__HCF_TYPE)
#endif // _CCX
#define T5__HCF_TYPE (T4__HCF_TYPE)
// Default to TYPE_AP + SSN!
#define HCF_TYPE (T5__HCF_TYPE )
#define MSF_COMPONENT_MAJOR_VER 2
#define MSF_COMPONENT_MINOR_VER 0
#define HCF_IO HCF_IO_MEM
#define HCF_DMA 0
#define HCF_MEM_IO 1
/* Endian is determined by vxWorks project compile option */
#if (_BYTE_ORDER == _BIG_ENDIAN)
#undef HCF_LITTLE_ENDIAN
#define HCF_BIG_ENDIAN 1
#endif
#define CNV_END(w) ( ((hcf_16)(w) & 0x00FF) << 8 | ((hcf_16)(w) & 0xFF00) >> 8 )
#if defined HCF_BIG_ENDIAN
//******************************************** B I G E N D I A N *******************************************
#define CNV_LITTLE_TO_INT(w) CNV_END(w) // endianess conversion needed
#define CNV_BIG_TO_INT(w) (w) // no endianess conversion needed
#else
//****************************************** L I T T L E E N D I A N ****************************************
#define CNV_LITTLE_TO_INT(w) (w) // no endianess conversion needed
#define CNV_BIG_TO_INT(w) CNV_END(w) // endianess conversion needed
#endif // HCF_BIG_ENDIAN
// conversion macros which can be expressed in other macros
#define CNV_INT_TO_LITTLE(w) CNV_LITTLE_TO_INT(w)
#define CNV_INT_TO_BIG(w) CNV_BIG_TO_INT(w)
#define IN_PORT_WORD( port ) *((volatile hcf_16 *)( port ))
#define OUT_PORT_WORD( port, value ) *((volatile hcf_16 *)( port )) = ((hcf_16)( value ))
//#define IN_PORT_BYTE( port ) *((volatile hcf_8 *)( port ))
#define IN_PORT_STRING( port, addr, len) { \
unsigned l = len; \
hcf_16 *d = (hcf_16 *)(addr); \
hcf_16 t; \
while (l--) { \
t = IN_PORT_WORD(port); \
*d++ = CNV_LITTLE_TO_INT(t); \
} \
} // IN_PORT_STRING
#define OUT_PORT_STRING( port, addr, len) { \
unsigned l = (len); \
hcf_16 *s = (hcf_16 *)(addr); \
hcf_16 t; \
while (l--) { \
t = *s++; \
t = CNV_LITTLE_TO_INT(t); \
OUT_PORT_WORD(port, t); \
} \
} // OUT_PORT_STRING
#define IN_PORT_STRING_16(port, dst, n) { \
unsigned l = (n); \
hcf_16 *d = (hcf_16 *)(dst); \
while (l--) { \
*d++ = IN_PORT_WORD(port); \
} \
} // IN_PORT_STRING_16
#define OUT_PORT_STRING_16(port, src, n) { \
hcf_16 t; \
int l = (n); \
hcf_16 *s = (hcf_16 *)(src); \
while (l--) { \
t = *s++; \
OUT_PORT_WORD(port, t); \
} \
} // OUT_PORT_STRING_16
/* #define HCF_YIELD (taskDelay(0) == 0) */
#ifdef WVLAN_DEBUG
#define DBG 1
#define _DEBUG 1
#endif
/* we'll need to add these prints someday */
#define OUTPUTDEBUGMSG(dprintf_exp)
#define ASSERTDEBUGMSG(cond, dprintf_exp)
#define HCF_INTERFACE_CONNECT(ifbp)
#define HCF_INTERFACE_DISCONNECT(ifbp)
#define HCF_ENTER_INTERFACE_FUNCT(ibfb)
#define HCF_LEAVE_INTERFACE_FUNCT(ifbp)
#define sysInWord(offsetAddr) IN_PORT_WORD(offsetAddr)
#define sysInByte(offsetAddr) IN_PORT_BYTE(offsetAddr)
#define sysOutWord(addr, value) OUT_PORT_WORD(addr, value)
#endif /*IPT_T8300 */
/************************************************************************************************************/
/*********************************** **************************************/
/************************************************************************************************************/
#if ! defined HCF_ALIGN
#define HCF_ALIGN 1 //default to no alignment
#endif // HCF_ALIGN
#if ! defined HCF_ASSERT
#define HCF_ASSERT 0
#endif // HCF_ASSERT
#if ! defined HCF_BIG_ENDIAN
#define HCF_BIG_ENDIAN 0
#endif // HCF_BIG_ENDIAN
#if ! defined HCF_DL_ONLY
#define HCF_DL_ONLY 0
#endif // HCF_DL_ONLY
#if ! defined HCF_DMA
#define HCF_DMA 0
#endif // HCF_DMA
#if ! defined HCF_ENCAP
#define HCF_ENCAP HCF_ENC
#endif // HCF_ENCAP
#if ! defined HCF_ENTRY
#define HCF_ENTRY( ifbp )
#endif // HCF_ENTRY
#if ! defined HCF_EXIT
#define HCF_EXIT( ifbp )
#endif // HCF_EXIT
#if ! defined HCF_EXT
#define HCF_EXT 0
#endif // HCF_EXT
#if ! defined HCF_INT_ON
#define HCF_INT_ON 1
#endif // HCF_INT_ON
#if ! defined HCF_IO
#define HCF_IO 0 //default 16 bits support only, port I/O
#endif // HCF_IO
#if ! defined HCF_LEGACY
#define HCF_LEGACY 0
#endif // HCF_LEGACY
#if ! defined HCF_MAX_LTV
#define HCF_MAX_LTV 1200 // sufficient for all known purposes
#endif // HCF_MAX_LTV
#if ! defined HCF_PROT_TIME
#define HCF_PROT_TIME 100 // number of 10K microsec protection timer against H/W malfunction
#endif // HCF_PROT_TIME
#if ! defined HCF_SLEEP
#define HCF_SLEEP 0
#endif // HCF_SLEEP
#if ! defined HCF_TALLIES
#define HCF_TALLIES ( HCF_TALLIES_NIC | HCF_TALLIES_HCF )
#endif // HCF_TALLIES
#if ! defined HCF_TYPE
#define HCF_TYPE 0
#endif // HCF_TYPE
#if HCF_BIG_ENDIAN
#undef HCF_BIG_ENDIAN
#define HCF_BIG_ENDIAN 1 //just for convenience of generating cfg_hcf_opt
#endif // HCF_BIG_ENDIAN
#if HCF_DL_ONLY
#undef HCF_DL_ONLY
#define HCF_DL_ONLY 1 //just for convenience of generating cfg_hcf_opt
#endif // HCF_DL_ONLY
#if HCF_DMA
#undef HCF_DMA
#define HCF_DMA 1 //just for convenience of generating cfg_hcf_opt
#endif // HCF_DMA
#if HCF_INT_ON
#undef HCF_INT_ON
#define HCF_INT_ON 1 //just for convenience of generating cfg_hcf_opt
#endif // HCF_INT_ON
#if ! defined IN_PORT_STRING_8_16
#define IN_PORT_STRING_8_16(port, addr, len) IN_PORT_STRING_16(port, addr, len)
#define OUT_PORT_STRING_8_16(port, addr, len) OUT_PORT_STRING_16(port, addr, len)
#endif // IN_PORT_STRING_8_16
/************************************************************************************************/
/********** *************/
/************************************************************************************************/
#if ! defined FAR
#define FAR // default to flat 32-bits code
#endif // FAR
typedef hcf_8 FAR *wci_bufp; // segmented 16-bits or flat 32-bits pointer to 8 bits unit
typedef hcf_16 FAR *wci_recordp; // segmented 16-bits or flat 32-bits pointer to 16 bits unit
/* I/O Address size
* Platforms which use port mapped I/O will (in general) have a 64k I/O space, conveniently expressed in a
* 16-bits quantity
* Platforms which use memory mapped I/O will (in general) have an I/O space much larger than 64k, and need a
* 32-bits quantity to express the I/O base
*/
#if HCF_IO & HCF_IO_MEM
typedef hcf_32 hcf_io;
#else
typedef hcf_16 hcf_io;
#endif //HCF_IO
#if HCF_PROT_TIME > 128
#define HCF_PROT_TIME_SHFT 3
#define HCF_PROT_TIME_DIV 8
#elif HCF_PROT_TIME > 64
#define HCF_PROT_TIME_SHFT 2
#define HCF_PROT_TIME_DIV 4
#elif HCF_PROT_TIME > 32
#define HCF_PROT_TIME_SHFT 1
#define HCF_PROT_TIME_DIV 2
#else //HCF_PROT_TIME >= 19
#define HCF_PROT_TIME_SHFT 0
#define HCF_PROT_TIME_DIV 1
#endif
#define HCF_PROT_TIME_CNT (HCF_PROT_TIME / HCF_PROT_TIME_DIV)
/************************************************************************************************************/
/******************************************* . . . . . . . . . *********************************************/
/************************************************************************************************************/
/* MSF_COMPONENT_ID is used to define the CFG_IDENTITY_STRCT in HCF.C
* CFG_IDENTITY_STRCT is defined in HCF.C purely based on convenience arguments.
* The HCF can not have the knowledge to determine the ComponentId field of the Identity record (aka as
* Version Record), therefore the MSF part of the Drivers must supply this value via the System Constant
* MSF_COMPONENT_ID.
* There is a set of values predefined in MDD.H (format COMP_ID_.....)
*
* Note that taking MSF_COMPONENT_ID as a default value for DUI_COMPAT_VAR is purely an implementation
* convenience, the numerical values of these two quantities have none functional relationship whatsoever.
*/
#if defined MSF_COMPONENT_ID
#if ! defined DUI_COMPAT_VAR
#define DUI_COMPAT_VAR MSF_COMPONENT_ID
#endif // DUI_COMPAT_VAR
#if ! defined DUI_COMPAT_BOT //;?this way utilities can lower as well raise the bottom
#define DUI_COMPAT_BOT 8
#endif // DUI_COMPAT_BOT
#if ! defined DUI_COMPAT_TOP //;?this way utilities can lower as well raise the top
#define DUI_COMPAT_TOP 8
#endif // DUI_COMPAT_TOP
#endif // MSF_COMPONENT_ID
#if (HCF_TYPE) & HCF_TYPE_HII5
#if ! defined HCF_HSI_VAR_5
#define HCF_HSI_VAR_5
#endif // HCF_HSI_VAR_5
#if ! defined HCF_APF_VAR_4
#define HCF_APF_VAR_4
#endif // HCF_APF_VAR_4
#if (HCF_TYPE) & HCF_TYPE_WARP
#if ! defined HCF_STA_VAR_4
#define HCF_STA_VAR_4
#endif // HCF_STA_VAR_4
#else
#if ! defined HCF_STA_VAR_2
#define HCF_STA_VAR_2
#endif // HCF_STA_VAR_2
#endif
#if defined HCF_HSI_VAR_4
err: HSI variants 4 correspond with HII;
#endif // HCF_HSI_VAR_4
#else
#if ! defined HCF_HSI_VAR_4
#define HCF_HSI_VAR_4 //Hermes-II all types (for the time being!)
#endif // HCF_HSI_VAR_4
#if ! defined HCF_APF_VAR_2
#define HCF_APF_VAR_2
#endif // HCF_APF_VAR_2
#if ! defined HCF_STA_VAR_2
#define HCF_STA_VAR_2
#endif // HCF_STA_VAR_2
#endif // HCF_TYPE_HII5
#if ! defined HCF_PRI_VAR_3
#define HCF_PRI_VAR_3
#endif // HCF_PRI_VAR_3
#if defined HCF_HSI_VAR_1 || defined HCF_HSI_VAR_2 || defined HCF_HSI_VAR_3
err: HSI variants 1, 2 and 3 correspond with H-I only;
#endif // HCF_HSI_VAR_1, HCF_HSI_VAR_2, HCF_HSI_VAR_3
#if defined HCF_PRI_VAR_1 || defined HCF_PRI_VAR_2
err: primary variants 1 and 2 correspond with H-I only;
#endif // HCF_PRI_VAR_1 / HCF_PRI_VAR_2
/************************************************************************************************************/
/******************************************* . . . . . . . . . *********************************************/
/************************************************************************************************************/
/* The BASED customization macro is used to resolves the SS!=DS conflict for the Interrupt Service logic in
* DOS Drivers. Due to the cumbersomeness of mixing C and assembler local BASED variables still end up in the
* wrong segment. The workaround is that the HCF uses only global BASED variables or IFB-based variables.
* The "BASED" construction (supposedly) only amounts to something in the small memory model.
*
* Note that the whole BASED rigmarole is needlessly complicated because both the Microsoft Compiler and
* Linker are unnecessary restrictive in what far pointer manipulation they allow
*/
#if ! defined BASED
#define BASED
#endif // BASED
#if ! defined EXTERN_C
#ifdef __cplusplus
#define EXTERN_C extern "C"
#else
#define EXTERN_C
#endif // __cplusplus
#endif // EXTERN_C
#if ! defined NULL
#define NULL ((void *) 0)
#endif // NULL
#if ! defined TEXT
#define TEXT(x) x
#endif // TEXT
#if !defined _TCHAR_DEFINED
#define TCHAR char
#endif // _TCHAR_DEFINED
/************************************************************************************************************/
/*********************** C O N F L I C T D E T E C T I O N & R E S O L U T I O N ************************/
/************************************************************************************************************/
#if defined HCF_LITTLE_ENDIAN
err: HCF_LITTLE_ENDIAN is obsolete;
#endif // HCF_LITTLE_ENDIAN
#if defined HCF_INT_OFF
err: HCF_INT_OFF is obsolete;
#endif //HCF_INT_OFF
#if HCF_ALIGN != 1 && HCF_ALIGN != 2 && HCF_ALIGN != 4 && HCF_ALIGN != 8
err: invalid value for HCF_ALIGN;
#endif // HCF_ALIGN
#if (HCF_ASSERT) & ~( HCF_ASSERT_PRINTF | HCF_ASSERT_SW_SUP | HCF_ASSERT_MB | HCF_ASSERT_RT_MSF_RTN | \
HCF_ASSERT_LNK_MSF_RTN )
err: invalid value for HCF_ASSERT;
#endif // HCF_ASSERT
#if (HCF_ASSERT) & HCF_ASSERT_MB && ! ( (HCF_EXT) & HCF_EXT_MB ) //detect potential conflict
err: these macros are not used consistently;
#endif // HCF_ASSERT_MB / HCF_EXT_MB
#if HCF_BIG_ENDIAN != 0 && HCF_BIG_ENDIAN != 1
err: invalid value for HCF_BIG_ENDIAN;
#endif // HCF_BIG_ENDIAN
#if HCF_DL_ONLY != 0 && HCF_DL_ONLY != 1
err: invalid value for HCF_DL_ONLY;
#endif // HCF_DL_ONLY
#if HCF_DMA != 0 && HCF_DMA != 1
err: invalid value for HCF_DMA;
#endif // HCF_DMA
#if (HCF_ENCAP) & ~( HCF_ENC | HCF_ENC_SUP )
err: invalid value for HCF_ENCAP;
#endif // HCF_ENCAP
#if (HCF_EXT) & ~( HCF_EXT_INFO_LOG | HCF_EXT_INT_TX_EX | HCF_EXT_TALLIES_FW | HCF_EXT_TALLIES_HCF | \
HCF_EXT_NIC_ACCESS | HCF_EXT_MB | HCF_EXT_INT_TICK | \
HCF_EXT_IFB_STRCT | HCF_EXT_DESC_STRCT | HCF_EXT_TX_CONT )
err: invalid value for HCF_EXT;
#endif // HCF_EXT
#if HCF_INT_ON != 0 && HCF_INT_ON != 1
err: invalid value for HCF_INT_ON;
#endif // HCF_INT_ON
#if (HCF_IO) & ~( HCF_IO_MEM | HCF_IO_32BITS )
err: invalid value for HCF_IO;
#endif // HCF_IO
#if HCF_LEGACY != 0 && HCF_LEGACY != 1
err: invalid value for HCF_LEGACY;
#endif // HCF_LEGACY
#if HCF_MAX_LTV < 16 || HCF_MAX_LTV > 2304
err: invalid value for HCF_MAX_LTV;
#endif // HCF_MAX_LTV
#if HCF_PROT_TIME != 0 && ( HCF_PROT_TIME < 19 || 256 < HCF_PROT_TIME )
err: below minimum .08 second required by Hermes or possibly above hcf_32 capacity;
#endif // HCF_PROT_TIME
#if (HCF_SLEEP) & ~( HCF_CDS | HCF_DDS )
err: invalid value for HCF_SLEEP;
#endif // HCF_SLEEP
#if (HCF_SLEEP) && ! (HCF_INT_ON)
err: these macros are not used consistently;
#endif // HCF_SLEEP / HCF_INT_ON
#if (HCF_SLEEP) && ! ( (HCF_EXT) & HCF_EXT_INT_TICK )
//;? err: these macros are not used consistently;
#endif // HCF_SLEEP / HCF_EXT_INT_TICK
#if (HCF_TALLIES) & ~( HCF_TALLIES_HCF | HCF_TALLIES_NIC | HCF_TALLIES_RESET ) || \
(HCF_TALLIES) == HCF_TALLIES_RESET
err: invalid value for HCF_TALLIES;
#endif // HCF_TALLIES
#if (HCF_TYPE) & ~(HCF_TYPE_WPA | HCF_TYPE_USB | HCF_TYPE_PRELOADED | HCF_TYPE_HII5 | HCF_TYPE_WARP | \
HCF_TYPE_CCX /* | HCF_TYPE_TX_DELAY */ )
err: invalid value for HCF_TYPE;
#endif //HCF_TYPE
#if (HCF_TYPE) & HCF_TYPE_WARP && (HCF_TYPE) & HCF_TYPE_WPA
err: at most 1 of these macros should be defined;
#endif //HCF_TYPE_WARP / HCF_TYPE_WPA
#endif //HCFCFG_H